Colorado to Alaska: general contractor license reciprocity
Colorado does not issue a statewide general contractor license, so there is nothing to transfer. Here is Alaska's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Registration with nothing carried over from another state (every state)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Alaska has no reciprocity, endorsement or examination waiver for contractors, and it does not participate in the NASCLA Accredited Examination. In practice that costs an inbound general contractor very little at this level, because Alaska asks nobody for an examination or for trade experience: the General Contractor registration is granted on a completed application, a $25,000 bond, insurance and fees. A contractor holding a demanding license in another state and a contractor with no license at all therefore file the same form and pay the same $350. What does not transfer is the right to work on homes: the residential contractor endorsement on this page's residential level takes a cold climate course and an Alaska examination that no out-of-state credential replaces. The division does not publish a processing time, saying only that an application generally takes several weeks once the complete packet has been submitted; progress can be tracked in the MY LICENSE portal and the program is reachable at [email protected] or (907) 465-2050.
Registration is required before any bid is submitted, not merely before work starts (AS 08.18.011(a)), and a general contractor may not award work to an unregistered specialty contractor. A partnership or joint venture counts as registered if one of the general partners or venturers whose name appears in the trading name is registered. Mechanical and electrical contractor registrations are separate categories that additionally require a Mechanical Administrator or Electrical Administrator license under AS 08.40; they are covered by the mechanical trades pages rather than here. Application documents and verifications from other licensing jurisdictions go stale after 12 months under 12 AAC 02.915, and an application is treated as abandoned after 12 months without correspondence, with the application fee forfeited.
At a glance
- Trade exam
- Waived
- Law / code exam
- Not required
- Out-of-state hours
- Do not count
What you must already have
- None about the applicant's history. AS 08.18.021 asks only for the type of contracting activity, the names and addresses of the owner, partners or corporate officers and statutory agent, and a Social Security number. There is no minimum experience, no apprenticeship, no examination and no qualifying individual for a general contractor registration in Alaska.
What you'll do to get licensed in Alaska
- 1Application fee. Pay the application fee ($100). $100 nonrefundable application fee filed with the General Contractor Registration Application (#08-4815), online through MyAlaska or on paper. It is not refunded if the application is denied or abandoned..
- 2License fee. Pay the license or certificate fee ($250). $250 registration fee, making $350 due with the application. Registrations run two years and expire on September 30 of even-numbered years whatever date they were issued, except one issued within 90 days of an expiration date, which runs to the next cycle. Renewal is filed online through MY LICENSE and requires current bond and insurance..
- 3Surety bond. Post a surety bond ($25,000). $25,000 surety bond running to the State on the division's Surety Bond form (#08-4971) with the surety's power of attorney attached, signed by both the contractor and the surety. It answers for state and local taxes, for labor, material and equipment suppliers, and for judgments arising from negligent or improper work, breach of contract or damage to public facilities. It must stay in force for three years until canceled by the surety, the principal or the department. A cashier's check cash deposit, or a time certificate of deposit or savings passbook made out to the State of Alaska in trust for the contractor, may be filed instead. A specialty contractor posts $10,000 and a handyman contractor $5,000..
- 4Insurance. Carry the required insurance. Public liability and property damage insurance covering Alaska contracting operations, with limits of at least $20,000 for damage to property, $50,000 for injury including death to any one person and $100,000 for injury including death to more than one person. The division's own Certificate of Insurance Coverage form (#08-4977) or a certificate from the carrier is accepted. Workers' compensation from an Alaska-admitted carrier, or a self-insurance certificate, is required if the business uses employee labor or is a corporation or LLC. Bond and insurance documents must reach the division within 30 days of issuance and must show the business name exactly as it appears on the application, including the entity name and any DBA..
- 5Business license. Obtain a business license. A corporation, LLC or other registered entity must already be on file with the division's Corporations Section, with its Alaska entity number given on the application, before the contractor application is processed. A State of Alaska business license under AS 43.70 is then obtained after the professional registration is issued. Advertising, contracts, signs and documents must carry the registered contractor name, the registration number, the mailing address and the principal place of business, or send customers to a website that carries all of them..
- 6Contractor license. Hold or obtain a contractor license (if applicable). Choosing the right category matters more in Alaska than qualifying for it. A business whose work uses not more than three trades registers as a Specialty Contractor instead, and one whose projects each have an aggregate contract price of $10,000 or less, counting all labor and materials, may register as a Handyman Contractor. Splitting a larger job into contracts under $10,000 to reach the lower bond is expressly treated as evasion. Mechanical and electrical contractor registrations additionally require a licensed Mechanical Administrator or Electrical Administrator under AS 08.40..
- 7Other. A signed application naming the DBA and every owner and principal officer or member, and a United States Social Security number on file with the division or a signed exemption request in its place. A business that believes it falls outside the chapter may file the division's Request for Exemption from Construction Contractors Regulation (#08-4809) rather than guessing..
Published fees on this path total $350, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $25,000
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Alaska licenses general contractors
Alaska general contractor · “General Contractor (registration without residential endorsement)”
Statewide license
Alaska's unlimited tier is the General Contractor certificate of registration issued by the Construction Contractors Program at the Division of Corporations, Business and Professional Licensing. It covers commercial work and operations that use three or more trades or that supervise mechanical and specialty subcontractors, and it carries no dollar limit. It is important to understand what this registration is and is not: AS 08.18 sets no examination, no experience and no qualifying individual for it, so it is a registration backed by money rather than a test of skill, and the only competency credential in the Alaska contractor scheme is the residential contractor endorsement that sits on top of it. The registration belongs to the business, which files a $25,000 surety bond or an equivalent cash deposit, public liability and property damage insurance, workers' compensation where employees are used, a $100 application fee and a $250 registration fee. Below this tier sit the Specialty Contractor registration, limited to work using not more than three trades and bonded at $10,000, and the Handyman Contractor registration, limited to projects with an aggregate contract price of $10,000 or less and bonded at $5,000. A general contractor may not build, remodel or bid residential work on a one-to-four-unit dwelling above 25 percent of the structure's value without the residential contractor endorsement.
Why Colorado has nothing to transfer
Colorado general contractor · “General / Building contractor license (Class A or B in most jurisdictions)”
Licensed by cities and counties
Colorado has no statewide general or commercial building contractor license. DORA licenses electricians and plumbers through its Division of Professions and Occupations but states on its own consumer page that general contractors are not licensed at the state level and that you should check with the city; the Pikes Peak Regional Building Department says the same thing in its exam notice. Unlimited and commercial building work is therefore licensed by each city, county or regional building department, typically as a Class A (unlimited) and Class B (limited commercial or under a height or storey cap) pair: Denver issues General Contractor Class A and Building Contractor Class B, Colorado Springs issues Building Contractor A-1, A-2, B-1 and B-2, Fort Collins issues Classes A, B, C1 and C2, and Aurora issues a single Commercial Building Contractor license. The license is held by the business and qualified by an individual who holds the supervisor certificate and has passed the relevant exam, so the person moving states applies for the certificate and the company applies for the license. The common thread is the ICC National Standard General Building Contractor (A) and Building Contractor (B) examinations, which nearly every Colorado jurisdiction requires, and a license must be obtained separately in each jurisdiction where the contractor will pull permits.
How local licensing works in Colorado
How local licensing works. Each Colorado jurisdiction licenses building contractors under its own ordinance and building code, and there is no state board above them. Class letters and size thresholds differ from place to place, so a Class B in Fort Collins is not a Class B in Colorado Springs. What is consistent is the exam: most jurisdictions require an ICC National Standard contractor examination, open book and multiple choice through Pearson VUE, and the Pikes Peak notice explains why that matters - "with successful passage of an ICC contractor exam, contractors can be secure in the knowledge that their results may be honored by many jurisdictions in Colorado and throughout the United States. However, each jurisdiction has the right to determine if this exam is acceptable." The same exam appears as W11, F11 or G11 for the unlimited (A) tier and W12, F12 or G12 for the limited (B) tier, depending on which code edition the jurisdiction has adopted, and departments generally require results from the current or a recent code year. The notice also warns that "passing an ICC contractor exam is NOT a license to practice and does not guarantee licensing in any jurisdiction."
Denver. The individual first earns a supervisor certificate. Class A covers "to erect, add to, alter, demolish, or repair any building or structure" and needs seven years of notarized commercial experience including ground-up high-rise work over 75 feet plus ICC exam #F11. Class B covers any building classified as less than a high rise and needs four years of notarized commercial experience on ground-up builds of 55 to 75 feet plus ICC exam #F12; Class B-2 caps the highest floor level or occupiable roof at 30 feet, with four years of experience including ground-up projects up to 40 feet, also on ICC #F12. Certificates cost $60 and renew every three years. The company then buys the General Contractor Class A or Building Contractor Class B license at $250 for three years. Denver states it "does not accept or reciprocate contractor licenses and/or certificates from other counties or states."
Colorado Springs, El Paso County and nearby towns (Pikes Peak Regional Building Department). Building Contractor A-1 covers "the construction, alteration and repair of any type or size of structure permitted by the Regional Building Code"; A-2 is the same except Group A, E and I occupancies over 30,000 square feet and any building requiring Type I construction; B-1 covers all occupancies except Groups A, E, I and H and Type I construction; B-2 covers nonstructural remodeling plus Group B, F, M or S buildings up to one storey and 7,500 square feet and Group R buildings up to 16 units and two storeys. License fees are $200 for A-1 and A-2, $175 for B-1 and B-2, on top of a $50 non-refundable application fee, and each of these classes requires an exam. Applicants supply three reference forms documenting experience, copies of all licenses held inside or outside Colorado, liability insurance naming PPRBD, workers' compensation, a Colorado certificate of good standing and a name-based judicial record check. Files close three weeks before the monthly Licensing Committee meeting, the Board of Review approves the following week, and the license must be claimed within 60 days. PPRBD accepts ICC National Standardized or ICC Colorado Standard exams passed on or after January 1, 2016 and states that "no out-of-state exams will be accepted."
Aurora. A single Commercial Building Contractor license "Requires ICC General Building Contractor 'A' OR 'B' Certification"; the supervisor license fee is $131 and the license fee is $392, plus registration and three job references. Limited Building Commercial and Demolition contractors register with three years of documented experience instead.
Fort Collins. Class A and A(DR) cover any building or structure; Class B and B(DR) cover new builds up to and including five storeys; Class C1 and C2 cover new builds up to three storeys and multi-family housing projects; E(C) covers nonstructural commercial alterations. Classes A and B require ICC exam G11 over the 2018 IBC plus the concrete manual, and Classes C1, C2 and E(C) require ICC exam G12, with G11 also accepted in place of G12. Every general contractor class also needs three project verifications with permits and final inspection records signed by someone unconnected to the applicant, and general liability of $1,000,000 per person with $2,000,000 per accident, property damage and aggregate. A new license with supervisor certificate is $300 for a two-year term including a $75 non-refundable application fee; renewals are $225. The city adopted the 2024 ICC codes with amendments in December 2025 and requires exam results from a current code year.
Boulder. Class A covers "the construction, alteration, wrecking, or repair of any type or size of building or structure permitted in the City of Boulder" and requires the ICC A Contractors certificate; Class B covers commercial and residential buildings of construction types V, IV, III-B and II-B and requires the ICC B certificate. New Class A and Class B applicants must also document education, training or years of experience in non-residential construction. Boulder states that it "does not accept reciprocal licenses from other jurisdictions," and its license covers work inside city limits only.
Jefferson County. Class A (labeled 2018 G11) covers "the construction, alteration, tenant finish or repair of any type of structure permitted by the Building Code" and Class B (2018 G12) covers commercial buildings and single- or multi-dwelling buildings up to three storeys. The county accepts "proof that you have passed an appropriate ICC exam within the last 3 years or ... a copy of a valid license issued from an ICC participating jurisdiction." The fee is $50 and licenses renew annually.
Arapahoe County. Building Contractor Class A (commercial) and Class B (commercial/residential) each cost $360 and require the matching ICC certification "or equivalent" certification by a recognized state or national certification entity; Class D specialty is $84. Insurance must carry a $2,000,000 general aggregate and $1,000,000 each occurrence, with the county as an additional holder.
Lakewood. Class A-1 Unlimited Commercial is "only issued to contractors with experience in building high-rise construction"; A-2 Limited Commercial is limited to two-storey commercial or four-storey R occupancies; A-4 covers commercial and residential remodeling not exceeding 30 percent of the original structure. A-1 and A-2 applicants attach any ICC certifications they or their employees hold. Fees are $150 for the first probationary year and $400 for each subsequent three-year renewal.
Douglas County. Unincorporated Douglas County registers general contractors rather than licensing them and states that it "has no testing requirements." Registration needs the application, workers' compensation proof or an exemption statement and business liability insurance naming the Building Division; fees are currently waived.
Out-of-state holders. None of the jurisdictions reviewed will convert another state's general contractor license into a Colorado one. Denver and Boulder rule it out in writing, and PPRBD will not accept exam results earned out of state. What does carry across is the ICC National Standard contractor certification: pass the (A) or (B) exam on a code edition the jurisdiction currently accepts and it will usually satisfy the testing requirement in Denver, Colorado Springs, Aurora, Fort Collins, Boulder, Jefferson County and Arapahoe County, though each department still verifies experience, references or project history separately and charges its own fee. Jefferson County goes further and accepts a current license from another ICC participating jurisdiction in place of the exam. Check the required class, exam code year and fee with each building department before applying, and expect to hold a license in every jurisdiction where you pull permits.
- Denver (Community Planning and Development)
- Colorado Springs / El Paso County (Pikes Peak Regional Building Department)
- Aurora (Building Division)
- Fort Collins (Planning and Development Services)
- Lakewood (Public Works)
- Boulder
- Jefferson County (Division of Building Safety)
- Arapahoe County (Building Division)
- Douglas County (Building Division)
Common questions
- Do I have to take the Alaska general contractor exam if I'm licensed in Colorado?
- No. The trade exam is waived on this path.
- What does it cost to get a Alaska general contractor license from Colorado?
- Published fees on this path total $350, not counting exam vendor fees or bonds.
- Do my Colorado work hours count in Alaska?
- No. Alaska does not credit out-of-state hours on this path.
- Does it work the other way, from Alaska to Colorado?
- Not necessarily. Reciprocity is directed. Going from Alaska to Colorado, the mechanism is not applicable.
Sources
- Construction Contractor Professional Licensing - Bond and Insurance Quick Facts · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Other · verified September 17, 2026
- Construction Contractors - Alaska Division of Corporations, Business and Professional Licensing · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
- Construction Contractors FAQs - Alaska Division of Corporations, Business and Professional Licensing · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Faq · verified September 17, 2026
- Applications and Forms - Alaska Construction Contractors Program · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
- Statutes and Regulations - Construction Contractors (AS 08.18 and 12 AAC 21), September 2023 · AS 08.18.011, .013, .021, .024, .025, .031, .041, .051, .071, .101; 12 AAC 21.650, .660, .680, .690, .695, .700 · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Admin Rule · verified September 17, 2026
- Form 08-4815 - General Contractor Registration Application (rev. 09/03/2025) · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Form · verified September 17, 2026
- License Expiration Dates - Alaska Division of Corporations, Business and Professional Licensing · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
- National Organizations - Alaska Construction Contractors Program · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
- Form 08-4818 - Specialty Contractor Registration Application (rev. 09/03/2025) · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Form · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.