Colorado to Nebraska: general contractor license reciprocity

How the two layers fit together. Hold the Nebraska Department of Labor registration first - it is required statewide before any construction work and it is cheap and quick - then deal with the city, which is where any examination, bond or board approval lives. Nebraska cities differ so much that the only safe approach is to ask the building department with jurisdiction over the site what it licenses before bidding.

Omaha. Permits and Inspections licenses building contractors under Chapter 43, Article IX of the Municipal Code. The largest tiers are Class A and Class B, which cost $300.00 plus a $24.00 technology fee and require an examination, drawn from the National Contractor/Trades Examination Information Bulletin published with the licensing page; Class C is $200.00 plus a $16.00 technology fee with an examination, Class E is $100.00 plus an $8.00 technology fee with no examination, and Class D is a renewal-only class that the city describes as requiring an 'Equivalent License From Another Jurisdiction... The Exam is No Longer Available, Renewal License Only.' Every class needs a bond of at least $10,000.00 and liability insurance of at least $1,000,000.00 for Classes A and B, $500,000.00 for Class C and $300,000.00 for Classes D and E; the bond and insurance go to [email protected]. Renewal requires nine contact hours of continuing education a year, from construction-related college courses, from education outreach work with school or university students, or from courses through agencies certified by the International Code Council, the American Institute of Architects, the National Association of Home Builders or the Associated General Contractors of America. Applications and renewals are filed through the Accela portal at OmahaPermits.com. The class scopes themselves sit in the building code rather than on the licensing page, so confirm which class covers your work with Permits and Inspections on 402-444-5350 or [email protected].

Omaha's reciprocal license. Omaha is the only Nebraska jurisdiction found to publish a route that credits a contractor license held elsewhere, and it is a municipal route decided case by case rather than a state-to-state agreement. Its published requirements are: 'Must hold a valid contractor's license from another jurisdiction'; 'Proof of examination required'; 'Approval by the Building Board of Review'; and 'Payment of required fee - $100.00 + $8.00 Tech Fee.' Apply online at OmahaPermits.com for Building Board of Review approval of reciprocation of a building contractor's license. The board is a seven-member body which also hears building code waivers and appeals from the Superintendent of Permits and Inspections; reciprocal license applications are heard quarterly, so confirm the next hearing date and the filing deadline with Permits and Inspections. No list of accepted jurisdictions is published and approval is not automatic, so allow for a full quarter in the schedule and be ready to document the examination behind your existing license.

Lincoln. Building and Safety licenses contractors by trade and specialty - demolition, electrical, HVAC, plumbing, signs, street use and fire - and certifies master and journeyman tradespeople. There is no Lincoln general or commercial building contractor license, so a commercial builder works from the state registration and city permits while the trades hold their own licenses. Insurance must be at least $500,000 each occurrence for demolition, electrical, HVAC, plumbing, sign, street use and fire alarm work, or $1,000,000 for fire sprinkler and chemical extinguishing work, with 'City of Lincoln as an additional insured' by endorsement, a policy number rather than a binder number and the agent's signature; plumbing, HVAC, electrical and fire contractors must list a master's name on the certificate as an insured. A bond is needed only for work in the city right-of-way, where sign, street use and excavation contractors post a $5,000 license and permit bond or an equivalent cashier's check. Documents go to [email protected].

Everywhere else, and what does travel. Bellevue, Grand Island, Kearney, Papillion, La Vista and the other Nebraska cities run their own building departments, and several license only the trades. An out-of-state general contractor license and a NASCLA Accredited Examination carry no weight in the state registration and no weight in Lincoln; the one place either might help is an Omaha reciprocal license application, where the board wants proof of the examination behind the license you already hold. What always matters is the Department of Labor registration, workers' compensation coverage that stays in force, and the correct trade licenses for any electrical, plumbing or mechanical scope.

How local licensing works. Each Colorado jurisdiction licenses building contractors under its own ordinance and building code, and there is no state board above them. Class letters and size thresholds differ from place to place, so a Class B in Fort Collins is not a Class B in Colorado Springs. What is consistent is the exam: most jurisdictions require an ICC National Standard contractor examination, open book and multiple choice through Pearson VUE, and the Pikes Peak notice explains why that matters - "with successful passage of an ICC contractor exam, contractors can be secure in the knowledge that their results may be honored by many jurisdictions in Colorado and throughout the United States. However, each jurisdiction has the right to determine if this exam is acceptable." The same exam appears as W11, F11 or G11 for the unlimited (A) tier and W12, F12 or G12 for the limited (B) tier, depending on which code edition the jurisdiction has adopted, and departments generally require results from the current or a recent code year. The notice also warns that "passing an ICC contractor exam is NOT a license to practice and does not guarantee licensing in any jurisdiction."

Denver. The individual first earns a supervisor certificate. Class A covers "to erect, add to, alter, demolish, or repair any building or structure" and needs seven years of notarized commercial experience including ground-up high-rise work over 75 feet plus ICC exam #F11. Class B covers any building classified as less than a high rise and needs four years of notarized commercial experience on ground-up builds of 55 to 75 feet plus ICC exam #F12; Class B-2 caps the highest floor level or occupiable roof at 30 feet, with four years of experience including ground-up projects up to 40 feet, also on ICC #F12. Certificates cost $60 and renew every three years. The company then buys the General Contractor Class A or Building Contractor Class B license at $250 for three years. Denver states it "does not accept or reciprocate contractor licenses and/or certificates from other counties or states."

Colorado Springs, El Paso County and nearby towns (Pikes Peak Regional Building Department). Building Contractor A-1 covers "the construction, alteration and repair of any type or size of structure permitted by the Regional Building Code"; A-2 is the same except Group A, E and I occupancies over 30,000 square feet and any building requiring Type I construction; B-1 covers all occupancies except Groups A, E, I and H and Type I construction; B-2 covers nonstructural remodeling plus Group B, F, M or S buildings up to one storey and 7,500 square feet and Group R buildings up to 16 units and two storeys. License fees are $200 for A-1 and A-2, $175 for B-1 and B-2, on top of a $50 non-refundable application fee, and each of these classes requires an exam. Applicants supply three reference forms documenting experience, copies of all licenses held inside or outside Colorado, liability insurance naming PPRBD, workers' compensation, a Colorado certificate of good standing and a name-based judicial record check. Files close three weeks before the monthly Licensing Committee meeting, the Board of Review approves the following week, and the license must be claimed within 60 days. PPRBD accepts ICC National Standardized or ICC Colorado Standard exams passed on or after January 1, 2016 and states that "no out-of-state exams will be accepted."

Aurora. A single Commercial Building Contractor license "Requires ICC General Building Contractor 'A' OR 'B' Certification"; the supervisor license fee is $131 and the license fee is $392, plus registration and three job references. Limited Building Commercial and Demolition contractors register with three years of documented experience instead.

Fort Collins. Class A and A(DR) cover any building or structure; Class B and B(DR) cover new builds up to and including five storeys; Class C1 and C2 cover new builds up to three storeys and multi-family housing projects; E(C) covers nonstructural commercial alterations. Classes A and B require ICC exam G11 over the 2018 IBC plus the concrete manual, and Classes C1, C2 and E(C) require ICC exam G12, with G11 also accepted in place of G12. Every general contractor class also needs three project verifications with permits and final inspection records signed by someone unconnected to the applicant, and general liability of $1,000,000 per person with $2,000,000 per accident, property damage and aggregate. A new license with supervisor certificate is $300 for a two-year term including a $75 non-refundable application fee; renewals are $225. The city adopted the 2024 ICC codes with amendments in December 2025 and requires exam results from a current code year.

Boulder. Class A covers "the construction, alteration, wrecking, or repair of any type or size of building or structure permitted in the City of Boulder" and requires the ICC A Contractors certificate; Class B covers commercial and residential buildings of construction types V, IV, III-B and II-B and requires the ICC B certificate. New Class A and Class B applicants must also document education, training or years of experience in non-residential construction. Boulder states that it "does not accept reciprocal licenses from other jurisdictions," and its license covers work inside city limits only.

Jefferson County. Class A (labeled 2018 G11) covers "the construction, alteration, tenant finish or repair of any type of structure permitted by the Building Code" and Class B (2018 G12) covers commercial buildings and single- or multi-dwelling buildings up to three storeys. The county accepts "proof that you have passed an appropriate ICC exam within the last 3 years or ... a copy of a valid license issued from an ICC participating jurisdiction." The fee is $50 and licenses renew annually.

Arapahoe County. Building Contractor Class A (commercial) and Class B (commercial/residential) each cost $360 and require the matching ICC certification "or equivalent" certification by a recognized state or national certification entity; Class D specialty is $84. Insurance must carry a $2,000,000 general aggregate and $1,000,000 each occurrence, with the county as an additional holder.

Lakewood. Class A-1 Unlimited Commercial is "only issued to contractors with experience in building high-rise construction"; A-2 Limited Commercial is limited to two-storey commercial or four-storey R occupancies; A-4 covers commercial and residential remodeling not exceeding 30 percent of the original structure. A-1 and A-2 applicants attach any ICC certifications they or their employees hold. Fees are $150 for the first probationary year and $400 for each subsequent three-year renewal.

Douglas County. Unincorporated Douglas County registers general contractors rather than licensing them and states that it "has no testing requirements." Registration needs the application, workers' compensation proof or an exemption statement and business liability insurance naming the Building Division; fees are currently waived.

Out-of-state holders. None of the jurisdictions reviewed will convert another state's general contractor license into a Colorado one. Denver and Boulder rule it out in writing, and PPRBD will not accept exam results earned out of state. What does carry across is the ICC National Standard contractor certification: pass the (A) or (B) exam on a code edition the jurisdiction currently accepts and it will usually satisfy the testing requirement in Denver, Colorado Springs, Aurora, Fort Collins, Boulder, Jefferson County and Arapahoe County, though each department still verifies experience, references or project history separately and charges its own fee. Jefferson County goes further and accepts a current license from another ICC participating jurisdiction in place of the exam. Check the required class, exam code year and fee with each building department before applying, and expect to hold a license in every jurisdiction where you pull permits.