LicensebyState

Illinois to Arizona: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 14 sources

Illinois does not issue a statewide general contractor license, so there is nothing to transfer. Here is Arizona's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

NASCLA exam or out-of-state waiver of the trade examination (every origin state)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Arizona has no reciprocity agreement with any state, so every inbound applicant follows the same route and no origin state is treated better than another. The Registrar's own words are: "Arizona does not have direct reciprocity with any state; however, the Registrar does offer out of state applicants the opportunity to request a waiver of the required trade exam and experience, if the qualifying party has held a comparable license in another state within the past 5 years of the application date and the license was obtained by a trade examination." There are two ways past the Arizona trade exam at this level. The first is the NASCLA Accredited Examination for Commercial General Building Contractors, which the Registrar accepts in place of its own trade exam for the B-1, B-2, KB-1 and KB-2 classifications; you may sit it in any participating jurisdiction and buy a transcript from NASCLA so the Registrar can see the result. The second is the out-of-state waiver on Form RC-L-200G: you fill in your side, send it to the agency that issued your license so it can verify your license history, exams and years of experience and stamp it with a state seal, then enclose the returned form with your Arizona application in place of a trade exam result. That waiver is discretionary and is not pre-approved. The Arizona Statutes and Rules Exam is never waived on either route for an out-of-state applicant. Four years of trade experience, a license bond, background checks for every person named on the application, entity registration and the fees all still apply.

The rule behind the waiver is A.A.C. R4-9-106(E)(1): the Registrar "may waive the trade examination requirement if records reflect that the qualifying party is currently or has previously been a qualifying party for a licensee in the other state in the same classification, or in a comparable classification, within the preceding five years." Because it is written as "may waive", it is a case-by-case decision rather than an entitlement, and comparability of your out-of-state classification to the Arizona B-1 or B-2 classification is the Registrar's call. Form RC-L-200G also cites A.R.S. 32-1122(A)(4), A.R.S. 32-1122(E)(1) and A.R.S. 32-4302 and says a qualifying applicant may see "the waiver of the examination requirements, experience requirements, or both." A.R.S. 32-4302 is Arizona's universal licensing recognition statute: it requires a Title 32 license to be issued to a person who establishes residence in Arizona and who has held a good-standing license in another state at the same practice level for at least a year, obtained by examination where the other state required one, with no discipline or pending investigation; subsection (C) preserves the state-laws exam, so the Arizona Statutes and Rules Exam still applies. The Registrar's Service Members and Veterans page publishes the no-examination version of that statute for the spouse of an active-duty member accompanying the member to an Arizona duty station. One origin state is named in the Registrar's out-of-state paperwork, and it is a scope question rather than an advantage: Form RC-L-200G tells California applicants that "Arizona's Engineering classifications may differ in scope from California's" and asks anyone applying for the Arizona A General Engineering license to email a scope letter to [email protected] describing the work they will perform in Arizona before submitting the application. That instruction concerns the A engineering classification rather than the B-1 or B-2 building classifications, and it waives nothing. Separately, A.A.C. R4-9-106(F) lets the Registrar waive the experience requirement in whole or in part on the strength of an appropriate trade examination passed within the past two years or a valid nationally recognized certification. The Registrar publishes no processing time for application review or approval; ask at [email protected], 602-542-1525 or 877-692-9762.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • You must have passed a licensing exam in Illinois that the destination considers comparable.The Registrar's licensing-fees page names "KB-1/B-1 Commercial or Dual Building Contractor and KB-2/B-2 Small commercial or Dual Residential and Small Commercial", and its License Classification Requirements page adds that "A Qualifying Party who has already taken the NASCLA exams for the B1, B2, CR-11 and C and R 11 Electrical may submit those scores with their applications", so an existing NASCLA pass travels with you. The NASCLA exam is an exam credential rather than a license or an agreement between states: anyone may sit it in any participating jurisdiction, and holding a license in a NASCLA state is not itself an Arizona advantage. It waives nothing else, including the Arizona Statutes and Rules Exam, the four years of experience, the bond, the background checks or any fee. You must buy a transcript from NASCLA so the Registrar can view your result.
  • Alternatively: you are currently, or have been within the preceding five years, the qualifying party for a licensed contractor in another state in the same classification or in a classification the Registrar finds comparable to the Arizona B-1 or B-2 classification.A.A.C. R4-9-106(E)(1)(b). The Registrar's applying page states the same test as having "held a comparable license in another state within the past 5 years of the application date". Comparability is decided by the Registrar; there is no published list of equivalent out-of-state classifications and no pre-approval, so the decision is made when the completed application is reviewed. The verification is done by the issuing agency on Form RC-L-200G, which asks it for your current license status, the date you were first named on the license, the number of years of experience it can verify, the exams you took and the name and date of the passing exam, under the agency's state seal.
  • Your Illinois license must have been obtained by examination, not by reciprocity or grandfathering.
  • Four years of practical or management trade experience in commercial building construction, at least two of them within the last ten years. Accredited college, university or manufacturer training may substitute for up to two of the four years. Experience earned in other states counts.A.R.S. 32-1122(E)(1) and the Registrar's License Classification Requirements, which set four years for the B-1, B-2, KB-1 and KB-2 classifications and state that the years "must be hands-on and/or managerial experience". A.A.C. R4-9-119 requires the Registrar to accept military service or training, diplomas or transcripts from accredited training programs, and completion certificates from an apprenticeship approved by the US Department of Labor or a state apprenticeship agency, and to accept experience regardless of whether you were licensed or working for a licensed entity at the time. The Registrar may also reduce the four-year requirement where custom and usage in the craft shows it to be excessive, and under A.A.C. R4-9-106(F) may waive experience in whole or in part on the strength of a trade exam passed within the past two years or a valid nationally recognized certification. Form RC-L-200G can waive the experience requirement as well as the exam when the out-of-state agency verifies your years.
  • You must have no disciplinary action or unresolved complaints on your record.A.R.S. 32-1122(C) and (D). The Registrar may find the circumstances behind a denial, refusal or revocation excusable if your actions did not result in an unremedied hardship, danger or loss to the public. Prior-license, felony and unlicensed-activity disclosure forms go in with the application where they apply.

What you'll do to get licensed in Arizona

  1. 1Law / code exam. Pass a law, rules, or code exam. Arizona Statutes and Rules Training Course and Exam (SRE), a computer-based open-book course and exam offered only online through Gmetrix. It covers the building, safety, health and lien laws of the state, the administrative principles of the contracting business and the Registrar's rules, and a grade of at least 70 percent is required. It cannot be waived unless the qualifying party has been the qualifying party on an Arizona contractor's license within the past five years, so an out-of-state applicant always takes it, whether or not the trade exam is waived..
  2. 2Exam fee. Pay the exam fee ($61). Examination fee for the online Arizona Statutes and Rules Training Course and Exam, paid directly to Gmetrix..
  3. 3Trade exam. Pass the destination's trade exam (if applicable). Trade exam for the commercial and dual general building classifications. You may satisfy it in one of three ways: pass the NASCLA Accredited Examination for Commercial General Building Contractors, pass the AZ ROC general commercial exam through PSI Services, or obtain an out-of-state waiver on Form RC-L-200G. A passing grade of at least 70 percent is required and an Arizona exam must have been taken not more than two years before you apply. The Registrar has combined the B-1, B-2, KB-1 and KB-2 exams into a single exam, so one sitting covers whichever of those four classifications you apply for. After a failure you wait 30 days to retake, and 90 days after a third or later failure..
  4. 4Exam fee. Pay the exam fee ($66) (if applicable). Examination fee for the AZ ROC trade-specific exam, taken either online or at a testing center, paid directly to PSI. Payable only if you sit the Arizona trade exam rather than using the NASCLA exam or obtaining a waiver..
  5. 5Exam fee. Pay the exam fee ($106) (if applicable). Examination fee for the NASCLA Commercial General Building exam, paid to PSI Exams Online, if you take the NASCLA route instead of the AZ ROC trade exam. A separate NASCLA transcript purchase is also payable directly to NASCLA online and is required before the Registrar can view your result; the Registrar's applying page and its licensing-fees page give different amounts for that second charge, so confirm the current figure with NASCLA or ask the Registrar at [email protected] before you pay..
  6. 6Application fee. Pay the application fee ($200). Application fee for a General Commercial classification (A, B-1, B-2) or a General Dual classification (KA, KB-1, KB-2). The Registrar waives the initial application fee for a first-time sole proprietor applicant who is the spouse of an active-duty service member, or a veteran discharged not more than two years before the application date; residential and dual applicants still pay the Residential Recovery Fund assessment..
  7. 7License fee. Pay the license or certificate fee ($580). License fee for a General Commercial classification, making $780 in total with the application fee; there is no recovery fund assessment on a commercial-only license. A General Dual license (KA, KB-1, KB-2) costs $480 in license fee plus a $370 Residential Recovery Fund assessment, or $1,050 in total, because it carries residential scope. Renewal is $580 for General Commercial and $480 plus a $270 recovery fund assessment, or $750, for General Dual..
  8. 8Surety bond. Post a surety bond ($5,000). Contractor's license bond on the Registrar's bond form, sized by classification and by the gross volume of work you expect to do in Arizona. For Class A and B general commercial building contractors the bands are $5,000 for $150,000 or less, $15,000 for more than $150,000 up to $500,000, $25,000 for more than $500,000 up to one million, $50,000 for more than one million up to five million, $75,000 for more than five million up to ten million, and $100,000 over ten million. A dual license such as KB-1 or KB-2 combines the commercial amount with the residential amount ($9,000 under $750,000 of residential volume, $15,000 at or above it) and the penal sum must be split on the bond between the two figures. A surety bond, cash, or a certificate of deposit from a bank operating in Arizona is accepted. The effective date cannot be in the future and must be within six months of submission, and the bond company's seal and a notarized attorney-in-fact signature are required..
  9. 9Other. Residential Recovery Fund assessment. It is not charged on a commercial-only B-1 or B-2 license, but every applicant for a dual classification such as KB-1 or KB-2 pays it, even if a license fee waiver is approved. The alternative to the assessment is posting a surety or cash bond of $200,000 to the license. ($370) (if applicable).
  10. 10Insurance. Carry the required insurance. Attestation that you have complied with the statutes and rules governing workers' compensation insurance. If the business is required to carry workers' compensation under Arizona law, the attestation must give the policy number or be accompanied by proof of self-insurance..
  11. 11Background check. Complete a background check. A background check for every person named on the license application, obtained through the Registrar's background check vendor. A completed check expires 90 days from its completion date. Anyone who has had an international address must submit an international and domestic check and list every foreign and domestic address where they have lived..
  12. 12Business license. Obtain a business license. Entity registration. A limited liability company or corporation must be registered with the Arizona Corporation Commission and in good standing with it before the license application is submitted, and must stay in good standing to renew. A partnership registers with the Arizona Secretary of State. A sole proprietorship needs no entity filing. You may only contract and advertise under the entity name the Registrar has licensed, so any trade name you want to use must be entered on the application as a DBA; filing the trade name with the Secretary of State is recommended but not required..
  13. 13Other. A legible copy of a government-issued photo identification, such as a valid driver's license or passport, for every individual named in the Persons section of the license application. Applications are filed through the ROC Online Customer Portal, or mailed to Registrar of Contractors, P.O. Box 6748, Phoenix, AZ 85005-6748, or delivered to 1700 W. Washington Street, Suite 105, Phoenix, AZ 85007-2812..

Published fees on this path total $841, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam
  • Exam fee · $61
  • Trade exam · if applicable
  • Exam fee · $66 · if applicable
  • Exam fee · $106 · if applicable

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $5,000

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How Arizona licenses general contractors

Arizona general contractor · “B-1 General Commercial Contractor; B-2 General Small Commercial; KB-1 or KB-2 dual

Statewide license

Verified September 17, 2026· 4 sources

Issued by Arizona Registrar of Contractors (AZ ROC)

Arizona's unlimited general building license is the B-1 General Commercial Contractor classification, issued statewide by the Registrar of Contractors (AZ ROC). It allows the licensee to construct, alter and repair any structure built for the support, shelter and enclosure of persons, animals or movable property, including the management and direct or indirect supervision of the work; electrical, plumbing, air conditioning, boiler, swimming pool, spa and water well work must be subcontracted to an appropriately licensed contractor. B-2 General Small Commercial Contractor is the same commercial scope capped at projects of $2,000,000 or less including labor and materials. Neither commercial classification covers residential work: the Registrar separates its markets by prefix, with B-1 and B-2 commercial general building, plain B residential general building, C- and R- commercial and residential specialty trades, CR- specialty dual, and K codes general dual. To hold both sides on one license you take a dual classification: KB-1 Dual Building Contractor covers the B-1 and B scopes together, and KB-2 Dual Residential and Small Commercial covers the B-2 and B scopes together. The license is held by a business, not by a person: it may be issued to a sole proprietorship, partnership, limited liability company or corporation, and the Registrar states that "the license belongs to the business and not to the qualifying party." The reader of this page is the qualifying party, the regularly employed person who supplies the four years of experience and passes the exams on the business's behalf.

Moving to ArizonaLeaving Arizona

Why Illinois has nothing to transfer

Illinois general contractor · “No statewide license; local titles include Chicago General Contractor Class A, B or C

Licensed by cities and counties

Verified September 17, 2026· 18 sources

Illinois has no statewide general, commercial or building contractor license and no state board that examines or qualifies builders, so an out-of-state general contractor license has nothing at the state level to transfer into. The State does license pieces of the work: the Department of Financial and Professional Regulation licenses roofing contractors under the Illinois Roofing Industry Licensing Act, in a limited tier for residential buildings of eight units or less and an unlimited tier for residential, commercial and industrial roofs, and also licenses architects, professional and structural engineers, land surveyors and alarm contractors, while the Department of Public Health licenses plumbers, plumbing contractors and irrigation contractors and separate state programs cover elevator and fire sprinkler contractors. Commercial building itself is controlled by home rule municipalities through the building permit, and the City of Chicago's General Contractor license, graded Class A through E by project value, is by far the most consequential credential in the state. A general contractor arriving in Illinois gets licensed or registered in each jurisdiction where they will pull permits, carries the insurance and bonds those jurisdictions require, and makes sure the roofing, plumbing, electrical and mechanical scopes are performed under the correct state or municipal trade licenses.

How local licensing works in Illinois

How it works in Illinois. No Illinois agency issues a general, commercial, building or unlimited contractor license, and there is no Illinois qualifying party or state business-and-law exam for general building work. Home rule municipalities control commercial construction through the permit, and each one writes its own contractor ordinance, so a contractor is licensed or registered separately in every jurisdiction where they build. Where a city does license, the credential is generally based on insurance, financial solvency, entity documents and a fee rather than on a competence exam, and none of the programs reviewed recognizes a general contractor license issued by another state. What genuinely travels into Illinois is a state trade license: roofing under 225 ILCS 335, plumbing under the Department of Public Health, and the state elevator, fire sprinkler and alarm credentials, all of which cities check before they issue a permit.

Chicago. Chicago's General Contractor license is the one credential that shapes commercial work in Illinois. It is required to bid on, undertake, hire or supervise, or control the means and methods of any 'regulated activity' - work requiring a building, sign or demolition (wrecking) permit, a sewer permit, a Department of Public Health permit for sandblasting, grinding or chemical washing, work exempt from permit under Section 402 of the Chicago Construction Codes Administrative Provisions, or work under a stormwater management plan. Licenses go to businesses, including sole proprietorships, in five classes graded by project value, defined as 'the fair market value of materials and labor provided by all contractors and subcontractors as part of all concurrent and consecutive regulated activities at the same site': Class A unlimited value, ordinary or complex demolition, $5 million per occurrence of insurance, $3,500.00; Class B up to $20 million, ordinary or complex demolition, $3 million, $1,800.00; Class C up to $10 million, ordinary demolition, $2 million, $1,300.00; Class D up to $4 million, ordinary demolition, $2 million, $900.00; Class E up to $500,000, no demolition, $1 million, $300.00. The Class B, C and D project limits and the Class C and D insurance figures took effect January 1, 2026, and for Class C and D licenses issued before that date the higher insurance requirement is enforced when the policy on file expires. Commercial general liability must come from an insurer authorized in Illinois and rated B+ or higher by A.M. Best, covering bodily injury, personal injury, property damage and completed operations, with primary plus excess or umbrella policies allowed above $1 million; the full requirements are in Section 4-36-090 of the Municipal Code. The application also needs a statement of financial solvency on the supplied form, proof of authority to do business in Illinois, an Assumed Name Certificate where a trade name is used, and government photo identification for the controlling persons. There is no exam, no experience review and no qualifying party. Continental Testing Services handles applications and renewals by mail for the Department of Buildings; the license is valid one year and is automatically inactivated if the insurance policy lapses. A licensed general contractor's own employees and subcontractors under its supervision and control do not need their own general contractor license, but electrical, plumbing, mason, drain layer, elevator mechanic and board-up work must be done by the holders of those separate City licenses, and anyone contracting directly with the owner needs their own license and must be listed on the permit.

Cook County (unincorporated areas). Every contractor working in unincorporated Cook County registers with the Department of Building and Zoning: $150 per trade to start and $75 per trade annually by December 31, with $1,000,000 general liability naming Cook County Building and Zoning at 69 W. Washington, Suite 2830, Chicago as certificate holder. The owner or a corporate officer files, with the Articles of Incorporation or current Annual Domestic Report. Roofing registrants file the State of Illinois roofing license and demolition registrants a fully approved bond. No exam. Check the site against the county's CookViewer tool first, because much of suburban Cook County is incorporated and licensed by its own village.

Aurora. A General contractor registration costs $200 and consists of the Contractor Licensing Application, a certificate of insurance naming the City of Aurora as primary and non-contributory additional insured with $1,000,000 general aggregate and $500,000 per occurrence, statutory workers' compensation, and Secretary of State registration or a county DBA certificate. Aurora tests only electrical and mechanical contractors, accepting ICC certifications or licenses from named municipalities in place of its own exam; the General category has no test. Elevator, fire suppression, roofing and sign registrations are also $200, and a dumpster or right-of-way obstruction registration needs a $5,000 surety bond. Delinquent permits will block a renewal.

Evanston. General Contractor registration is $150 a year, renewable through the Citizen Portal, with general liability of at least $300,000 per occurrence, bodily injury and property damage of at least $100,000 per occurrence each, and workers' compensation at statutory minimums naming Evanston as certificate holder. Right-of-way work requires $1,000,000 per occurrence with the city as an additional insured. State-regulated contractors submit a copy of the state license. Trade registration is $125.

Joliet. Registration is required before any permit is issued but costs nothing: 'there are no forms or fees for registration, unless you are a Sign Erector or for HVAC Testing.' The requirement is a certificate of insurance naming the City of Joliet, with minimum limits of $250,000 bodily injury per person, $500,000 bodily injury per occurrence and $250,000 property damage per occurrence. Trade credentials are checked separately: the Illinois State Roofer's License for roofing, the Illinois Plumbing Contractor Registration for plumbing, the State of Illinois elevator license, the Illinois sprinkler (FSC) and private alarm licenses, and a municipal electrical or HVAC license from Joliet's accepted list. Concrete work in the right-of-way needs a $10,000 street obstruction bond and demolition a $50,000 wrecking bond. Electrical, plumbing and HVAC contractors file a project-specific Letter of Intent, and all subcontractors must be listed on the permit application.

Rockford. 'General contractors are not required to be licensed.' Rockford controls commercial work through the permit only, and enforces the State roofing license: 'roofing contractors are required to obtain a license from the State of Illinois Department of Professional Regulation.'

Springfield. The Building and Zoning Department publishes electrical and mechanical contractor license and registration applications and no general contractor registration at all; its building permit application asks for the general contractor's name and address but for a license number only on the roofing line. Building and Zoning, 300 South 7th Street, Room 304, (217) 789-2171.

Peoria. Peoria licenses electrical and HVAC contractors individually at $150.00 each, on an open-book ICC exam or a Normal or Pekin license, plus boiler tenders and stationary engineers. Its four Contractor Business Licenses cover parking lot paving, sidewalks and driveways, right-of-way dumpsters and sewer connections, at $25.00 or $60.00 a year with $5,000 or $10,000 license and permit bonds. There is no general building contractor license.

Everywhere else. Every other Illinois city, village and county sets its own rules; many suburban villages register contractors and charge an annual fee, while others require only a permit and proof of insurance. Confirm the requirement, the current fee and the insurance limits with each building department before you bid work there.

Moving to IllinoisLeaving Illinois

Common questions

Do I have to take the Arizona general contractor exam if I'm licensed in Illinois?
The trade exam is waived, but Arizona requires a law or code exam.
What does it cost to get a Arizona general contractor license from Illinois?
Published fees on this path total $841, not counting exam vendor fees or bonds.
Do my Illinois work hours count in Arizona?
Yes. Documented out-of-state experience counts toward Arizona's eligibility requirements.
Does it work the other way, from Arizona to Illinois?
Not necessarily. Reciprocity is directed. Going from Arizona to Illinois, the mechanism is not applicable.

Sources

  1. Arizona Administrative Code Title 4, Chapter 9 - Registrar of Contractors (R4-9-106 Examinations; R4-9-119 Minimum Trade Experience) · A.A.C. R4-9-106(C)-(F); R4-9-119 · Arizona Secretary of State · Admin Rule · verified September 17, 2026
  2. A.R.S. 32-1122 - Qualifications for license (qualifying party experience, examination, bond, workers' compensation attestation) · A.R.S. 32-1122(B)-(F) · Arizona State Legislature · Statute · verified September 17, 2026
  3. A.R.S. 32-4302 - Out-of-state applicants; residents; military spouses; licensure; certification; exceptions; notice · A.R.S. 32-4302(A)-(C), (G) · Arizona State Legislature · Statute · verified September 17, 2026
  4. Arizona Registrar of Contractors - Applying for a License (qualifying party, examinations, NASCLA, out-of-state applicants, trade-exam waiver) · A.A.C. R4-9-106(E); A.R.S. 32-1122(E) · Arizona Registrar of Contractors · Agency Page · verified September 17, 2026
  5. Arizona Registrar of Contractors - Bond Information (license bond amounts by classification and contemplated gross volume) · Arizona Registrar of Contractors · Agency Page · verified September 17, 2026
  6. Arizona Registrar of Contractors - Instructions for License Bonds and bond schedules (Form RC-L-220/I, Rev. 02/23) · Arizona Registrar of Contractors · Form · verified September 17, 2026
  7. Arizona Registrar of Contractors - Applying for a License checklist (LLC or corporation applicants) · Arizona Registrar of Contractors · Form · verified September 17, 2026
  8. Arizona Registrar of Contractors - License Classification Requirements (note on submitting prior NASCLA scores) · Arizona Registrar of Contractors · Agency Page · verified September 17, 2026
  9. Arizona Registrar of Contractors - License Classification Requirements (minimum years of experience and exams by classification) · A.R.S. 32-1122(E) · Arizona Registrar of Contractors · Form · verified September 17, 2026
  10. Arizona Registrar of Contractors - License Classifications (B, B-1, B-2, B-3, KB-1, KB-2 general building scopes) · Arizona Registrar of Contractors · Agency Page · verified September 17, 2026
  11. Arizona Registrar of Contractors - License and Renewal Fees (general commercial, general residential and general dual) · A.R.S. 32-1152 · Arizona Registrar of Contractors · Agency Page · verified September 17, 2026
  12. Arizona Registrar of Contractors - Service Members and Veterans (licensure without examination, fee waiver, military experience) · A.R.S. 32-4301, 32-4302, 32-4303; A.A.C. R4-9-119 · Arizona Registrar of Contractors · Agency Page · verified September 17, 2026
  13. Arizona Registrar of Contractors - Out-of-State Waiver Request Form (Form RC-L-200G, Rev. 02/23) · A.R.S. 32-1122(A)(4), 32-1122(E)(1), 32-4302; A.A.C. R4-9-106, R4-9-119 · Arizona Registrar of Contractors · Form · verified September 17, 2026
  14. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related