LicensebyState

Illinois to Georgia: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 7 sources

Illinois does not issue a statewide general contractor license, so there is nothing to transfer. Here is Georgia's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Licensure using the NASCLA Accredited Examination (any state, no agreement needed)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Georgia's own trade examination for the General Contractor and General Contractor Limited Tier licenses is the NASCLA Accredited Examination for Commercial General Building Contractors, so a contractor arriving from any state who has already passed it does not sit a separate Georgia trade examination. You release your NASCLA transcript to the Board with the application and, once the Board approves you, take the Georgia Business and Law examination through PSI; that examination is never waived. If you have not taken the NASCLA examination, it is the examination you will be approved to sit, and it is available to candidates in any participating state. Everything outside the trade examination still has to be met on its own: the Board's experience routes, a minimum net worth of $150,000 for the standard tier or $25,000 for the Limited Tier, $500,000 per occurrence of general liability insurance, workers compensation once the business has three or more employees in Georgia, and Georgia Corporations Division registration if the license will be held by a company. Out-of-state experience counts toward eligibility; the Board does not require the work or the supporting commercial project to have been performed in Georgia.

This is the NASCLA pathway, and in Georgia it is the ordinary pathway rather than an alternative one: the Board's licensure comparison chart lists the NASCLA Accredited Examination and the Georgia Business and Law examination as the examination requirements for both general tiers, and every General Contractor application checklist asks for NASCLA transcripts. The Board accepts NASCLA in the General Contractor Division only; the residential classifications have their own Georgia examinations. Applications are filed in the GOALS portal and generally processed within 20 business days, with a deficiency letter restarting the count and a 60-day cure window. Exam approval letters are valid for one year and allow three sittings; the old examination-exemption or grandfathering route has closed. General contractor licenses renew by 30 June of even-numbered years and carry no continuing education requirement.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Count toward eligibility
Typical processing
About 20 days

What you must already have

  • You must have passed a licensing exam in Illinois that the destination considers comparable.The Board's licensure comparison chart names the NASCLA Accredited Examination for Commercial General Building Contractors as the examination requirement for both the General Contractor and the General Contractor Limited Tier license, alongside the Georgia Business and Law examination. A NASCLA certificate earned while licensed in another participating state therefore satisfies Georgia's trade examination outright; you release the NASCLA transcript to the Board with the application. The NASCLA examination is origin-independent and is not a reciprocal agreement with any state, and it does not waive the Georgia Business and Law examination or any application, experience, net worth or insurance requirement.
  • At least 21 years old.
  • One of the Board's three experience routes: a four-year degree in engineering, architecture, construction management, building construction or a related field acceptable to the Division, plus one year working as or for a general contractor; accredited college coursework plus practical experience totaling four years; or at least four years of active construction experience, of which two were as or for a general contractor and one in estimating, engineering, supervision or project management.
  • At least one commercial project, within five years of the application, on which you had general oversight and primary management responsibility as supervisor for its successful performance and completion. The Board does not require the project to have been in Georgia.

What you'll do to get licensed in Georgia

  1. 1Law / code exam. Pass a law, rules, or code exam. Georgia Business and Law examination, taken through PSI after the Board approves the application. It is required of every general contractor applicant, including NASCLA holders and reciprocity applicants, and is never waived..
  2. 2Trade exam. Pass the destination's trade exam (if applicable). NASCLA Accredited Examination for Commercial General Building Contractors. Shown as optional because applicants who already hold it simply release the transcript to the Board; applicants who do not will be approved to sit it, and it is administered by NASCLA rather than by Georgia, so it can be taken in any participating state before or after applying here..
  3. 3Application fee. Pay the application fee. A non-refundable application fee is due with the online application. The Board does not print the amount on its how-to guides; the current amount is on the fee schedule in the GOALS portal at https://goals.sos.ga.gov/, and the Board can be reached at (404) 424-9966..
  4. 4Exam fee. Pay the exam fee. Examination fees paid to the testing organization when each examination is scheduled: PSI for the Georgia Business and Law examination and NASCLA for the accredited examination and its transcript. The Board does not publish either fee..
  5. 5Financial responsibility. Show financial responsibility of at least $150,000. An affirmed minimum net worth of $150,000 for a General Contractor license, or $25,000 for the General Contractor Limited Tier, supported by the net worth affirmation or financial documents the application asks for. If you are applying as a qualifying agent the net worth must be the business organization's, not yours. Unlike the residential division, the general division does not offer a surety bond, line of credit or letter of credit as a substitute for the net worth affirmation..
  6. 6Insurance. Carry the required insurance ($500,000). General liability insurance of at least $500,000 per occurrence for both general tiers, evidenced by a signed current certificate of insurance naming the State Licensing Board for Residential and General Contractors, 237 Coliseum Drive, Macon, GA 31217 as certificate holder. Binders, information pages, policies and declaration pages are not accepted. An individual applicant must be the named insured; a qualifying agent's coverage must be in the company's name. Workers compensation insurance is required once the business has three or more employees in Georgia..
  7. 7Business license. Obtain a business license. If the license will be held by a company rather than by you personally, that business organization must be registered with the Georgia Corporations Division and, if formed outside Georgia, hold a Certificate of Authority to transact business here; you then apply as its qualifying agent. An individual license does not let you perform work on behalf of any LLC or corporation, even one you own outright..
  8. 8Contractor license. Hold or obtain a contractor license (if applicable). A general contractor license does not authorize electrical, plumbing, conditioned air, low voltage or utility work. Under O.C.G.A. 43-41-2(5) that work must be performed by someone licensed for it under Title 43 Chapter 14, whether a subcontractor or a separately licensed member of your own organization..
  9. 9Other. Supporting documents filed with the application: the work experience record and employment affidavit, a project reference affidavit for the qualifying commercial project, an official college transcript, diploma or certificate where you are qualifying on education, a Secure and Verifiable Document such as a driver license or passport with an affidavit of lawful presence under O.C.G.A. 50-36-1, a list of affiliations, bankruptcy documents if applicable, and disclosure of any disciplinary action or sanctions with supporting court documents and a letter of explanation..

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam
  • Trade exam · if applicable
  • Exam fee

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance · $500,000

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How Georgia licenses general contractors

Georgia general contractor · “General Contractor (also General Contractor Limited Tier, capped at $1,000,000 per contract)

Statewide license

Verified September 17, 2026· 6 sources

Issued by State Licensing Board for Residential and General Contractors, General Contractor Division (Georgia Secretary of State)

Georgia licenses commercial general contractors statewide through the General Contractor Division of the State Licensing Board for Residential and General Contractors, part of the Secretary of State's Professional Licensing Boards Division. A General Contractor license is unlimited as to the type of work and carries no financial limit on any project; the General Contractor Limited Tier is the same license capped at contracts of no more than $1,000,000. Neither license covers electrical, plumbing, conditioned air, low voltage or utility work, which must be performed by contractors licensed under O.C.G.A. Title 43 Chapter 14. As in the residential division the credential is usually entity-held: an individual license only covers work in your own name or as a sole proprietorship, and to contract through a company you apply as its qualifying agent, the person with final approval authority over its construction work, contracts and related financial affairs, with the financial and insurance proofs in the company's name. What makes Georgia unusual for an inbound contractor is the examination: the Board's own trade examination for both general tiers is the NASCLA Accredited Examination for Commercial General Building Contractors, so a NASCLA certificate earned in another state already satisfies it. The Georgia Business and Law examination is always separate and is never waived, including for reciprocity applicants.

Moving to GeorgiaLeaving Georgia

Why Illinois has nothing to transfer

Illinois general contractor · “No statewide license; local titles include Chicago General Contractor Class A, B or C

Licensed by cities and counties

Verified September 17, 2026· 18 sources

Illinois has no statewide general, commercial or building contractor license and no state board that examines or qualifies builders, so an out-of-state general contractor license has nothing at the state level to transfer into. The State does license pieces of the work: the Department of Financial and Professional Regulation licenses roofing contractors under the Illinois Roofing Industry Licensing Act, in a limited tier for residential buildings of eight units or less and an unlimited tier for residential, commercial and industrial roofs, and also licenses architects, professional and structural engineers, land surveyors and alarm contractors, while the Department of Public Health licenses plumbers, plumbing contractors and irrigation contractors and separate state programs cover elevator and fire sprinkler contractors. Commercial building itself is controlled by home rule municipalities through the building permit, and the City of Chicago's General Contractor license, graded Class A through E by project value, is by far the most consequential credential in the state. A general contractor arriving in Illinois gets licensed or registered in each jurisdiction where they will pull permits, carries the insurance and bonds those jurisdictions require, and makes sure the roofing, plumbing, electrical and mechanical scopes are performed under the correct state or municipal trade licenses.

How local licensing works in Illinois

How it works in Illinois. No Illinois agency issues a general, commercial, building or unlimited contractor license, and there is no Illinois qualifying party or state business-and-law exam for general building work. Home rule municipalities control commercial construction through the permit, and each one writes its own contractor ordinance, so a contractor is licensed or registered separately in every jurisdiction where they build. Where a city does license, the credential is generally based on insurance, financial solvency, entity documents and a fee rather than on a competence exam, and none of the programs reviewed recognizes a general contractor license issued by another state. What genuinely travels into Illinois is a state trade license: roofing under 225 ILCS 335, plumbing under the Department of Public Health, and the state elevator, fire sprinkler and alarm credentials, all of which cities check before they issue a permit.

Chicago. Chicago's General Contractor license is the one credential that shapes commercial work in Illinois. It is required to bid on, undertake, hire or supervise, or control the means and methods of any 'regulated activity' - work requiring a building, sign or demolition (wrecking) permit, a sewer permit, a Department of Public Health permit for sandblasting, grinding or chemical washing, work exempt from permit under Section 402 of the Chicago Construction Codes Administrative Provisions, or work under a stormwater management plan. Licenses go to businesses, including sole proprietorships, in five classes graded by project value, defined as 'the fair market value of materials and labor provided by all contractors and subcontractors as part of all concurrent and consecutive regulated activities at the same site': Class A unlimited value, ordinary or complex demolition, $5 million per occurrence of insurance, $3,500.00; Class B up to $20 million, ordinary or complex demolition, $3 million, $1,800.00; Class C up to $10 million, ordinary demolition, $2 million, $1,300.00; Class D up to $4 million, ordinary demolition, $2 million, $900.00; Class E up to $500,000, no demolition, $1 million, $300.00. The Class B, C and D project limits and the Class C and D insurance figures took effect January 1, 2026, and for Class C and D licenses issued before that date the higher insurance requirement is enforced when the policy on file expires. Commercial general liability must come from an insurer authorized in Illinois and rated B+ or higher by A.M. Best, covering bodily injury, personal injury, property damage and completed operations, with primary plus excess or umbrella policies allowed above $1 million; the full requirements are in Section 4-36-090 of the Municipal Code. The application also needs a statement of financial solvency on the supplied form, proof of authority to do business in Illinois, an Assumed Name Certificate where a trade name is used, and government photo identification for the controlling persons. There is no exam, no experience review and no qualifying party. Continental Testing Services handles applications and renewals by mail for the Department of Buildings; the license is valid one year and is automatically inactivated if the insurance policy lapses. A licensed general contractor's own employees and subcontractors under its supervision and control do not need their own general contractor license, but electrical, plumbing, mason, drain layer, elevator mechanic and board-up work must be done by the holders of those separate City licenses, and anyone contracting directly with the owner needs their own license and must be listed on the permit.

Cook County (unincorporated areas). Every contractor working in unincorporated Cook County registers with the Department of Building and Zoning: $150 per trade to start and $75 per trade annually by December 31, with $1,000,000 general liability naming Cook County Building and Zoning at 69 W. Washington, Suite 2830, Chicago as certificate holder. The owner or a corporate officer files, with the Articles of Incorporation or current Annual Domestic Report. Roofing registrants file the State of Illinois roofing license and demolition registrants a fully approved bond. No exam. Check the site against the county's CookViewer tool first, because much of suburban Cook County is incorporated and licensed by its own village.

Aurora. A General contractor registration costs $200 and consists of the Contractor Licensing Application, a certificate of insurance naming the City of Aurora as primary and non-contributory additional insured with $1,000,000 general aggregate and $500,000 per occurrence, statutory workers' compensation, and Secretary of State registration or a county DBA certificate. Aurora tests only electrical and mechanical contractors, accepting ICC certifications or licenses from named municipalities in place of its own exam; the General category has no test. Elevator, fire suppression, roofing and sign registrations are also $200, and a dumpster or right-of-way obstruction registration needs a $5,000 surety bond. Delinquent permits will block a renewal.

Evanston. General Contractor registration is $150 a year, renewable through the Citizen Portal, with general liability of at least $300,000 per occurrence, bodily injury and property damage of at least $100,000 per occurrence each, and workers' compensation at statutory minimums naming Evanston as certificate holder. Right-of-way work requires $1,000,000 per occurrence with the city as an additional insured. State-regulated contractors submit a copy of the state license. Trade registration is $125.

Joliet. Registration is required before any permit is issued but costs nothing: 'there are no forms or fees for registration, unless you are a Sign Erector or for HVAC Testing.' The requirement is a certificate of insurance naming the City of Joliet, with minimum limits of $250,000 bodily injury per person, $500,000 bodily injury per occurrence and $250,000 property damage per occurrence. Trade credentials are checked separately: the Illinois State Roofer's License for roofing, the Illinois Plumbing Contractor Registration for plumbing, the State of Illinois elevator license, the Illinois sprinkler (FSC) and private alarm licenses, and a municipal electrical or HVAC license from Joliet's accepted list. Concrete work in the right-of-way needs a $10,000 street obstruction bond and demolition a $50,000 wrecking bond. Electrical, plumbing and HVAC contractors file a project-specific Letter of Intent, and all subcontractors must be listed on the permit application.

Rockford. 'General contractors are not required to be licensed.' Rockford controls commercial work through the permit only, and enforces the State roofing license: 'roofing contractors are required to obtain a license from the State of Illinois Department of Professional Regulation.'

Springfield. The Building and Zoning Department publishes electrical and mechanical contractor license and registration applications and no general contractor registration at all; its building permit application asks for the general contractor's name and address but for a license number only on the roofing line. Building and Zoning, 300 South 7th Street, Room 304, (217) 789-2171.

Peoria. Peoria licenses electrical and HVAC contractors individually at $150.00 each, on an open-book ICC exam or a Normal or Pekin license, plus boiler tenders and stationary engineers. Its four Contractor Business Licenses cover parking lot paving, sidewalks and driveways, right-of-way dumpsters and sewer connections, at $25.00 or $60.00 a year with $5,000 or $10,000 license and permit bonds. There is no general building contractor license.

Everywhere else. Every other Illinois city, village and county sets its own rules; many suburban villages register contractors and charge an annual fee, while others require only a permit and proof of insurance. Confirm the requirement, the current fee and the insurance limits with each building department before you bid work there.

Moving to IllinoisLeaving Illinois

Common questions

Do I have to take the Georgia general contractor exam if I'm licensed in Illinois?
The trade exam is waived, but Georgia requires a law or code exam.
Do my Illinois work hours count in Georgia?
Yes. Documented out-of-state experience counts toward Georgia's eligibility requirements.
How long does the application take?
The board's published or typical processing time is about 20 days.
Does it work the other way, from Georgia to Illinois?
Not necessarily. Reciprocity is directed. Going from Georgia to Illinois, the mechanism is not applicable.

Sources

  1. O.C.G.A. Title 43, Chapter 41 - Residential and General Contractors (Board law as published by the Board) · O.C.G.A. 43-41-2, 43-41-5(b), 43-41-6, 43-41-7(2), 43-41-8(a)(3), 43-41-9, 43-41-17 · Georgia Secretary of State, State Licensing Board for Residential and General Contractors · Statute · verified September 17, 2026
  2. Ga. Comp. R. & Regs. Chapter 553-4 - Qualifications for Licensure, General Contractor Division · Ga. Comp. R. & Regs. 553-4-.01 through 553-4-.07 · Georgia Secretary of State, Rules and Regulations of the State of Georgia · Admin Rule · verified September 17, 2026
  3. State Licensing Board for Residential and Commercial General Contractors · Georgia Secretary of State, Professional Licensing Boards Division · Agency Page · verified September 17, 2026
  4. Licensure Comparison Chart - State Licensing Board for Residential and General Contractors (Revised 02/25) · O.C.G.A. 43-41-2(5), (9), (10), (11); 43-41-17 · Georgia Secretary of State, State Licensing Board for Residential and General Contractors · Other · verified September 17, 2026
  5. Residential and Commercial General Contractors - Frequently Asked Questions · Georgia Secretary of State, Professional Licensing Boards Division · Faq · verified September 17, 2026
  6. General Contractors: How to Guide (all General Contractor application types) · Georgia Secretary of State, Professional Licensing Boards Division · Agency Page · verified September 17, 2026
  7. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related