LicensebyState

Illinois to Idaho: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 15 sources

Illinois does not issue a statewide general contractor license, so there is nothing to transfer. Here is Idaho's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Registration for every applicant, wherever they come from (all states)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

A general or unlimited contractor license from another state gives an applicant no advantage in Idaho and is not needed here. For private commercial building, whatever its size, Idaho requires only registration with the Idaho Contractors Board, and registration has no trade examination, no business and law examination, no experience requirement, no bond and no financial responsibility test that an out-of-state credential could satisfy in place of. The applicant files the form, lists the owners, files a general liability certificate of at least $300,000 single limit and workers' compensation coverage or an exemption statement, discloses any felony conviction and any contractor license or registration denied, surrendered, suspended or revoked in any state, and pays the fee. Idaho publishes no reciprocity agreement and no endorsement route for contractor registration, and the forms contain no question about another state's license except the discipline question. Registration does not, however, let a contractor bid public works: that needs the separate Public Works Contractor license described below.

A contractor coming to Idaho for public work should plan for a real application. The Public Works Contractor license takes a written examination on the Idaho public works statutes and rules and, above Class D, on the DOPL Contractor's Business and Law Reference Manual, passed at 70% and sat at a DOPL office; three contractor references; detailed work history and reference letters to establish the construction type; and a financial statement meeting the class figures, which run from $25,000 net worth and $7,500 working capital at Class C to $1,000,000 and $600,000 for Unlimited, compiled by a CPA or LPA at Class CC and B and reviewed or audited at Class A and above. Out-of-state experience is presented as work history and counts toward the type and class assessment, but it waives nothing: Idaho Code Title 54, Chapter 19 has no reciprocity or endorsement section, and the Board names no partner state. The Board's published fees are unsettled at the moment, because a fee holiday began on 1 January 2026, biennial licensure began phasing in on 1 April 2026, and the web fee table and the Board's own fact sheet print figures that differ by a factor of two, so ask DOPL on (208) 334-3233 what is payable before applying. On the private side, the same three dead ends apply as at the residential level: Idaho Code 67-9409 universal licensure reaches registrations but adds nothing where the Board sets no competency requirement for anyone; the reciprocal registration section, Idaho Code 54-5213, covers only pre-2007 licenses issued by Idaho cities and counties; and DOPL does not accept the NASCLA Accredited Examination for contractor registration, with Idaho absent from the list of agencies that do and no Idaho trade examination for it to replace.

At a glance

Trade exam
Waived
Law / code exam
Not required
Out-of-state hours
Do not count

What you must already have

  • No examination, experience, apprenticeship, education, financial statement or qualifying party is required for registration, whatever the size or value of the commercial project. Registration covers construction over $2,000 with no upper limit.Idaho Code 54-5210 sets out the application contents and IDAPA 24.21.01 adds only the felony qualification and the fees; the rule chapter's examination, experience and continuing education sections are reserved and empty. The $2,000 figure in Idaho Code 54-5205(2)(f) is the floor below which registration is not needed, not a ceiling, and the statute forbids splitting a project into sub-$2,000 contracts to get under it.
  • You must have no disciplinary action or unresolved complaints on your record.Required by Idaho Code 54-5210(1)(g) and asked on both the individual and business registration forms. It is the only question on either form that looks at what another state's board has done.
  • No felony conviction in any state or federal court. An applicant with a felony conviction may request an exemption review in writing, in which the Board considers the court records and any supplemental information about suitability and may grant an interview; the applicant carries the burden of establishing suitability.IDAPA 24.21.01.100.01, read with Idaho Code 67-9411, which requires the Board to weigh relevance to fitness rather than apply an automatic bar and permits a one-year conditional registration in place of a denial.

What you'll do to get licensed in Idaho

  1. 1Application fee. Pay the application fee ($120). Application fee, which includes the original registration. DOPL's published schedule, effective 1 July 2026, is $120 for an individual and $120 for a business, then $60 to renew for one year or $120 to renew for two, with a $40 reinstatement fee on top of the renewal fee after a lapse. The Board's rule caps the fee at $60 a year and allows the annual fees to be aggregated for a two-year registration, and Idaho Code 54-5210(2) caps it at $150 a year. The February 2024 paper forms still print a $50 processing fee, so confirm the current amount with the Board on (208) 334-3233 or [email protected] before sending a check. A contractor who already holds an Idaho public works contractor or construction manager license and registers in order to take private work outside that license pays no registration fee..
  2. 2Insurance. Carry the required insurance. Certificate of general liability insurance, including products and completed operations coverage for the applicant's construction operations, of not less than $300,000 single limit, issued by an insurance company authorized to do business in Idaho, with the insured rather than DOPL named as the certificate holder. The figure is a statutory floor for registration, not a commercial limit: owners, lenders and general contractors on commercial work routinely require far higher limits by contract. Coverage must stay in force while the registration is active..
  3. 3Insurance. Carry the required insurance. Workers' compensation insurance certificate from a carrier authorized to do business in Idaho, or a written statement explaining why the coverage is not required of the applicant under Idaho Code 72-101 through 72-230. Failing to keep the coverage in place is a ground on which the Board may revoke a registration..
  4. 4Background check. Complete a background check. The application is submitted under oath and asks whether the applicant has ever received a conviction, finding of guilt, withheld judgment or suspended sentence for a felony in any state, and whether the applicant or anyone with an ownership interest has ever had a contractor license or registration denied, surrendered, suspended, revoked or otherwise disciplined anywhere. A yes to either means filing DOPL's disclosure form with the court records or the other state's board order. The Board evaluates the conviction for current relevance to fitness under Idaho Code 67-9411. DOPL holds a general power under Idaho Code 67-9411A to require fingerprints and an Idaho State Police and FBI records check, but the Contractors Board's rule and forms ask only for the sworn disclosure..
  5. 5Other. Social security number for an individual applicant or an employer tax identification number for a business; the legal business name and the business structure; the address of record, which becomes a public record; the first and last name of every principal, member, partner, shareholder or other owner, which must be people rather than another entity; one construction type code; and a statement of the type of construction to be undertaken. The application stays open for one year from the date it is filed..
  6. 6Contractor license. Hold or obtain a contractor license (if applicable). A separate Public Works Contractor license from the Public Works Contractors License Board is required, in addition to or instead of registration, for any state or local public works project estimated at $50,000 or more, and a Construction Manager license is required to manage public works construction. That license takes a written examination passed at 70%, three contractor references, detailed work history and reference letters to set the construction type, and a financial statement meeting the net worth and working capital figures for the class applied for. It is non-transferable and renews on the anniversary of issue, with biennial licensing phasing in from 1 April 2026. Fees vary by class and are in flux because of a fee holiday that began on 1 January 2026; ask DOPL on (208) 334-3233 or [email protected] for the amount currently payable..
  7. 7Financial responsibility. Show financial responsibility (if applicable). No financial statement, net worth or working capital figure is required for contractor registration. A financial statement is required only for the separate Public Works Contractor license, where it sets the class and therefore the bid limit: $25,000 net worth and $7,500 working capital for Class C, rising through $75,000 and $25,000 for CC, $150,000 and $50,000 for B, $300,000 and $100,000 for A, $450,000 and $150,000 for AA and $600,000 and $200,000 for AAA, to $1,000,000 and $600,000 for an Unlimited license. Class C may use DOPL's balance sheet form or a CPA or LPA statement; Class CC and B need a compiled statement with the accountant's report; Class A and above need a reviewed or audited statement, and none may be more than twelve months old..
  8. 8Surety bond. Post a surety bond (if applicable). Idaho requires no surety bond for contractor registration. Separately, Idaho's Public Contracts Bond Act requires performance and payment bonds on public buildings and public works contracts for the state and its political subdivisions, and a homeowner on a residential contract over $2,000 may require a bond at their own expense up to the value of the project..

Published fees on this path total $120, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance
  • Insurance

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · if applicable

How Idaho licenses general contractors

Idaho general contractor · “Contractor Registration (construction type 001, General Commercial Builder)

Statewide license

Verified September 17, 2026· 8 sources

Issued by Idaho Contractors Board (Division of Occupational and Professional Licenses)

Idaho has no general, unlimited or commercial building contractor license for private work. Commercial building sits under the same Idaho Contractors Board registration as houses: the applicant picks construction type 001 General Commercial Builder instead of a residential code, and DOPL states that the code chosen does not limit the work performed, so the two levels of this page are one credential with one set of requirements. Registration is issued on proof of general liability insurance of at least $300,000 single limit, workers' compensation coverage or a statement of why it is not required, an ownership list and sworn answers about felony convictions and prior license discipline, with no examination, no experience requirement, no bond, no net worth test and no qualifying party, however large the project. There is one genuine license above registration, but only where public money pays for the work: the Public Works Contractors License Board licenses contractors under Idaho Code Title 54, Chapter 19 for state or local public works projects estimated at $50,000 or more, in four types (Heavy, Highway, Building and Specialty Construction) and classes from D up to Unlimited that set the maximum a contractor may bid, and that license does require a written examination passed at 70%, three contractor references, detailed work history and a financial statement meeting the net worth and working capital figures for the class. DOPL's own answer is that people doing private residential or private commercial contracting do not need the public works license and should register as a general contractor instead, and a public works licensee who also takes private work registers with the Contractors Board without paying the registration fee.

Moving to IdahoLeaving Idaho

Why Illinois has nothing to transfer

Illinois general contractor · “No statewide license; local titles include Chicago General Contractor Class A, B or C

Licensed by cities and counties

Verified September 17, 2026· 18 sources

Illinois has no statewide general, commercial or building contractor license and no state board that examines or qualifies builders, so an out-of-state general contractor license has nothing at the state level to transfer into. The State does license pieces of the work: the Department of Financial and Professional Regulation licenses roofing contractors under the Illinois Roofing Industry Licensing Act, in a limited tier for residential buildings of eight units or less and an unlimited tier for residential, commercial and industrial roofs, and also licenses architects, professional and structural engineers, land surveyors and alarm contractors, while the Department of Public Health licenses plumbers, plumbing contractors and irrigation contractors and separate state programs cover elevator and fire sprinkler contractors. Commercial building itself is controlled by home rule municipalities through the building permit, and the City of Chicago's General Contractor license, graded Class A through E by project value, is by far the most consequential credential in the state. A general contractor arriving in Illinois gets licensed or registered in each jurisdiction where they will pull permits, carries the insurance and bonds those jurisdictions require, and makes sure the roofing, plumbing, electrical and mechanical scopes are performed under the correct state or municipal trade licenses.

How local licensing works in Illinois

How it works in Illinois. No Illinois agency issues a general, commercial, building or unlimited contractor license, and there is no Illinois qualifying party or state business-and-law exam for general building work. Home rule municipalities control commercial construction through the permit, and each one writes its own contractor ordinance, so a contractor is licensed or registered separately in every jurisdiction where they build. Where a city does license, the credential is generally based on insurance, financial solvency, entity documents and a fee rather than on a competence exam, and none of the programs reviewed recognizes a general contractor license issued by another state. What genuinely travels into Illinois is a state trade license: roofing under 225 ILCS 335, plumbing under the Department of Public Health, and the state elevator, fire sprinkler and alarm credentials, all of which cities check before they issue a permit.

Chicago. Chicago's General Contractor license is the one credential that shapes commercial work in Illinois. It is required to bid on, undertake, hire or supervise, or control the means and methods of any 'regulated activity' - work requiring a building, sign or demolition (wrecking) permit, a sewer permit, a Department of Public Health permit for sandblasting, grinding or chemical washing, work exempt from permit under Section 402 of the Chicago Construction Codes Administrative Provisions, or work under a stormwater management plan. Licenses go to businesses, including sole proprietorships, in five classes graded by project value, defined as 'the fair market value of materials and labor provided by all contractors and subcontractors as part of all concurrent and consecutive regulated activities at the same site': Class A unlimited value, ordinary or complex demolition, $5 million per occurrence of insurance, $3,500.00; Class B up to $20 million, ordinary or complex demolition, $3 million, $1,800.00; Class C up to $10 million, ordinary demolition, $2 million, $1,300.00; Class D up to $4 million, ordinary demolition, $2 million, $900.00; Class E up to $500,000, no demolition, $1 million, $300.00. The Class B, C and D project limits and the Class C and D insurance figures took effect January 1, 2026, and for Class C and D licenses issued before that date the higher insurance requirement is enforced when the policy on file expires. Commercial general liability must come from an insurer authorized in Illinois and rated B+ or higher by A.M. Best, covering bodily injury, personal injury, property damage and completed operations, with primary plus excess or umbrella policies allowed above $1 million; the full requirements are in Section 4-36-090 of the Municipal Code. The application also needs a statement of financial solvency on the supplied form, proof of authority to do business in Illinois, an Assumed Name Certificate where a trade name is used, and government photo identification for the controlling persons. There is no exam, no experience review and no qualifying party. Continental Testing Services handles applications and renewals by mail for the Department of Buildings; the license is valid one year and is automatically inactivated if the insurance policy lapses. A licensed general contractor's own employees and subcontractors under its supervision and control do not need their own general contractor license, but electrical, plumbing, mason, drain layer, elevator mechanic and board-up work must be done by the holders of those separate City licenses, and anyone contracting directly with the owner needs their own license and must be listed on the permit.

Cook County (unincorporated areas). Every contractor working in unincorporated Cook County registers with the Department of Building and Zoning: $150 per trade to start and $75 per trade annually by December 31, with $1,000,000 general liability naming Cook County Building and Zoning at 69 W. Washington, Suite 2830, Chicago as certificate holder. The owner or a corporate officer files, with the Articles of Incorporation or current Annual Domestic Report. Roofing registrants file the State of Illinois roofing license and demolition registrants a fully approved bond. No exam. Check the site against the county's CookViewer tool first, because much of suburban Cook County is incorporated and licensed by its own village.

Aurora. A General contractor registration costs $200 and consists of the Contractor Licensing Application, a certificate of insurance naming the City of Aurora as primary and non-contributory additional insured with $1,000,000 general aggregate and $500,000 per occurrence, statutory workers' compensation, and Secretary of State registration or a county DBA certificate. Aurora tests only electrical and mechanical contractors, accepting ICC certifications or licenses from named municipalities in place of its own exam; the General category has no test. Elevator, fire suppression, roofing and sign registrations are also $200, and a dumpster or right-of-way obstruction registration needs a $5,000 surety bond. Delinquent permits will block a renewal.

Evanston. General Contractor registration is $150 a year, renewable through the Citizen Portal, with general liability of at least $300,000 per occurrence, bodily injury and property damage of at least $100,000 per occurrence each, and workers' compensation at statutory minimums naming Evanston as certificate holder. Right-of-way work requires $1,000,000 per occurrence with the city as an additional insured. State-regulated contractors submit a copy of the state license. Trade registration is $125.

Joliet. Registration is required before any permit is issued but costs nothing: 'there are no forms or fees for registration, unless you are a Sign Erector or for HVAC Testing.' The requirement is a certificate of insurance naming the City of Joliet, with minimum limits of $250,000 bodily injury per person, $500,000 bodily injury per occurrence and $250,000 property damage per occurrence. Trade credentials are checked separately: the Illinois State Roofer's License for roofing, the Illinois Plumbing Contractor Registration for plumbing, the State of Illinois elevator license, the Illinois sprinkler (FSC) and private alarm licenses, and a municipal electrical or HVAC license from Joliet's accepted list. Concrete work in the right-of-way needs a $10,000 street obstruction bond and demolition a $50,000 wrecking bond. Electrical, plumbing and HVAC contractors file a project-specific Letter of Intent, and all subcontractors must be listed on the permit application.

Rockford. 'General contractors are not required to be licensed.' Rockford controls commercial work through the permit only, and enforces the State roofing license: 'roofing contractors are required to obtain a license from the State of Illinois Department of Professional Regulation.'

Springfield. The Building and Zoning Department publishes electrical and mechanical contractor license and registration applications and no general contractor registration at all; its building permit application asks for the general contractor's name and address but for a license number only on the roofing line. Building and Zoning, 300 South 7th Street, Room 304, (217) 789-2171.

Peoria. Peoria licenses electrical and HVAC contractors individually at $150.00 each, on an open-book ICC exam or a Normal or Pekin license, plus boiler tenders and stationary engineers. Its four Contractor Business Licenses cover parking lot paving, sidewalks and driveways, right-of-way dumpsters and sewer connections, at $25.00 or $60.00 a year with $5,000 or $10,000 license and permit bonds. There is no general building contractor license.

Everywhere else. Every other Illinois city, village and county sets its own rules; many suburban villages register contractors and charge an annual fee, while others require only a permit and proof of insurance. Confirm the requirement, the current fee and the insurance limits with each building department before you bid work there.

Moving to IllinoisLeaving Illinois

Common questions

Do I have to take the Idaho general contractor exam if I'm licensed in Illinois?
No. The trade exam is waived on this path.
What does it cost to get a Idaho general contractor license from Illinois?
Published fees on this path total $120, not counting exam vendor fees or bonds.
Do my Illinois work hours count in Idaho?
No. Idaho does not credit out-of-state hours on this path.
Does it work the other way, from Idaho to Illinois?
Not necessarily. Reciprocity is directed. Going from Idaho to Illinois, the mechanism is not applicable.

Sources

  1. Idaho Code Title 54, Chapter 19 - Public Works Contractors · Idaho Code 54-1902, 54-1904, 54-1910 · Idaho Legislature · Statute · verified September 17, 2026
  2. Idaho Code Title 54, Chapter 52 - Idaho Contractor Registration Act · Idaho Code 54-5203, 54-5204, 54-5205, 54-5207, 54-5209, 54-5210, 54-5211, 54-5213 · Idaho Legislature · Statute · verified September 17, 2026
  3. Idaho Code 67-9409 - Universal Licensure (Occupational Licensing Reform Act) · Idaho Code 67-9403(2)-(3), 67-9409 · Idaho Legislature · Statute · verified September 17, 2026
  4. Idaho Code 67-9411 - Evaluation of Criminal Convictions (and 67-9411A, Fingerprint Criminal History and Background Check) · Idaho Code 67-9411, 67-9411A · Idaho Legislature · Statute · verified September 17, 2026
  5. Idaho Business Contractor Registration Application (updated February 13, 2024) · Idaho Division of Occupational and Professional Licenses (DOPL) · Form · verified September 17, 2026
  6. Idaho Individual Contractor Registration Application (updated February 13, 2024) · Idaho Division of Occupational and Professional Licenses (DOPL) · Form · verified September 17, 2026
  7. Idaho Contractors Board - Division of Occupational and Professional Licenses · Idaho Division of Occupational and Professional Licenses (DOPL) · Agency Page · verified September 17, 2026
  8. DOPL notice, 27 August 2025 - transition to two-year contractor registrations · Idaho Division of Occupational and Professional Licenses (DOPL) · Other · verified September 17, 2026
  9. Idaho Contractors Board - Frequently Asked Questions · Idaho Division of Occupational and Professional Licenses (DOPL) · Faq · verified September 17, 2026
  10. Public Works Contractors License Board - Division of Occupational and Professional Licenses · Idaho Division of Occupational and Professional Licenses (DOPL) · Agency Page · verified September 17, 2026
  11. Public Works Contractors License Board - Frequently Asked Questions · Idaho Division of Occupational and Professional Licenses (DOPL) · Faq · verified September 17, 2026
  12. Public Works Contractors License Board - Apply for or Renew a License · Idaho Division of Occupational and Professional Licenses (DOPL) · Agency Page · verified September 17, 2026
  13. IDAPA 24.21.01 - Rules of the Idaho State Contractors Board · IDAPA 24.21.01.000, .001, .100, .400 · Idaho Division of Occupational and Professional Licenses (DOPL) · Admin Rule · verified September 17, 2026
  14. Idaho Public Works Contractor Licensing Fact Sheet (updated 30 January 2025) · Idaho Division of Occupational and Professional Licenses (DOPL) · Other · verified September 17, 2026
  15. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related