LicensebyState

Illinois to Mississippi: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 11 sources

Illinois does not issue a statewide general contractor license, so there is nothing to transfer. Here is Mississippi's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Building Construction license using the NASCLA Accredited Examination or the Universal Recognition of Occupational Licenses Act

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Mississippi accepts the NASCLA Accredited Examination for Commercial General Building Contractors in place of its own Building Construction trade examination, so an out-of-state contractor from any state can avoid the Mississippi-specific trade test. The board's classifications page marks Building Construction "(Trade or NASCLA accredited exam accepted)", its commercial application tells applicants for that major classification that they "may choose to take the Mississippi state exam or the NASCLA national accredited exam", and the PSI candidate bulletin carries both side by side: the Mississippi Building Construction examination is 80 questions in 3 hours at 70% to pass, the NASCLA examination 115 questions in 330 minutes with a minimum score of 81. Separately, an individual who establishes residency in Mississippi and holds a current license of similar scope in another state, held for at least one year, may file Form UROL with the application under the Universal Recognition of Occupational Licenses Act (Miss. Code Ann. 73-50-2) and have the trade examination waived outright; the same form covers an applicant who worked in a similar scope of practice for at least three years in a state that does not regulate construction at state level. Neither route touches the Mississippi Law and Business Management examination, the $400 application fee, the CPA-reviewed financial statement, the insurance certificate or the board's review of the application. An applicant who uses neither route simply sits the Mississippi Building Construction examination.

The NASCLA examination is booked through PSI on the Mississippi eligibility like any other portion, and passing candidates can release their transcript to other jurisdictions through NASCLA's National Examination Database. It is an exam credential rather than a license, and Mississippi does not carry it across to the residential level. Board Rule Part 802 Ch. 1, R. 1.1(2)(o) separately lets the Executive Director adopt as the required standardized examination any comparable examination passed by an applicant who holds a license in good standing in a comparable classification in a recognized reciprocity state, which is the authority behind the named-state agreements listed on this page. Once the file is complete the board reviews applications weekly, submitting them on Fridays and issuing approved licenses the following Wednesday, so the seven working days shown is board review time and not the whole process, and an application left incomplete for 180 days is destroyed. Eligibility to test lasts six months with unlimited retakes inside that window. Ask a licensing agent at (601) 354-6161 or (800) 880-6161 which examinations you owe before registering with PSI.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Count toward eligibility
Typical processing
About 7 days

What you must already have

  • You must have passed a licensing exam in Illinois that the destination considers comparable.The examination is 115 questions over 330 minutes with a minimum passing score of 81, and it is origin-independent: any candidate may sit it, and holding a license in another NASCLA state is not what makes it count. Mississippi names it on its classifications page, its reciprocity page, its FAQ, its Testing page and in the commercial application, and the PSI bulletin lets a Mississippi candidate elect it instead of the state-specific exam. It does not waive the Mississippi Law and Business Management examination. Mississippi accepts it for Building Construction and, in the electrical trade, accepts the NASCLA Accredited Electrical Examination for Master Electrical; it accepts no NASCLA examination for any residential classification.
  • The qualifying party must be an owner, officer or responsible managing employee who is genuinely employed by the applicant, actively engaged in the licensed work and able to supervise or perform it, and may qualify no more than three companies without the board's permission. Mississippi sets no minimum apprenticeship or trade hours for a commercial certificate.
  • Your Illinois license must be active and in good standing.The alternative on Form UROL is three years of work in a similar scope of practice in a state that does not regulate construction at state level, supported by references naming three completed jobs.
  • You must have held your Illinois license for at least 1 year.Universal Recognition route only: Form UROL requires the out-of-state license to have been held for at least one year.
  • Universal Recognition route only: proof of Mississippi residency, by state identification card, a current Mississippi residential utility bill, ownership or lease of a Mississippi residence, documentation of in-state employment or a notarized promise of employment for the applicant or spouse, or other verifiable documentation.The board's 2026 application packets state that the Act applies to individuals who establish residence in Mississippi after July 1, 2021, and that filing the form does not by itself guarantee licensure.

What you'll do to get licensed in Mississippi

  1. 1Law / code exam. Pass a law, rules, or code exam. Mississippi Law and Business Management examination through PSI: 50 questions, 2 hours, 70% to pass, open book. Every applicant for a Mississippi contractor license takes it, and no exam waiver agreement, NASCLA credential or universal-recognition waiver removes it..
  2. 2Trade exam. Pass the destination's trade exam. Mississippi Building Construction examination through PSI: 80 questions, 3 hours, 70% to pass, open book. An applicant may instead sit the NASCLA Accredited Examination for Commercial General Building Contractors, which Mississippi accepts for this classification..
  3. 3Application fee. Pay the application fee ($400). Commercial application fee of $400, which includes one trade classification. Each additional classification requested costs a further $100. Fees are not refundable and must be paid by check or money order. The annual renewal fee is also $400..
  4. 4Exam fee. Pay the exam fee ($120). PSI registration fee: $120 for one examination portion, $240 for two. The fee is charged for each registration, whether the examination is a first attempt or a repeat, and is not refundable or transferable..
  5. 5Financial responsibility. Show financial responsibility of at least $50,000. Reviewed or audited financial statement prepared and signed by a certified public accountant within the last twelve months, showing a net worth of at least $50,000 for a major classification such as Building Construction, or at least $20,000 for a specialty classification. A compilation is not accepted and the board states the requirement cannot be waived or substituted; there is no bond alternative, because Mississippi issues only an unlimited commercial license rather than monetary limitation tiers. The figure shown is the major-classification minimum..
  6. 6Insurance. Carry the required insurance. Certificate of general liability insurance showing at least $300,000 per occurrence and $600,000 aggregate, with the Mississippi State Board of Contractors named as certificate holder so it is notified if coverage is cancelled. The name insured must match the name the license is issued in. A workers compensation certificate is also required if the applicant has five or more employees..
  7. 7Business license. Obtain a business license. The certificate of responsibility is issued to a legal entity, so a corporation, LLC, LLP or limited partnership must be registered with the Mississippi Secretary of State and show proof of good standing before the license issues, and a company domiciled outside Mississippi must first qualify to do business in the State. Commercial applicants must also supply a Mississippi sales tax or use tax number and a Mississippi income tax or federal tax identification number..
  8. 8Other. Three reference letters, one of which must come from the applicant's bank or financial institution; a list of at least three completed jobs in the classification being applied for, which may be work done outside Mississippi; and proof that the qualifying party is employed by the applicant, by check stub, W-2 or a Secretary of State officer listing..

Published fees on this path total $520, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam
  • Trade exam
  • Exam fee · $120

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How Mississippi licenses general contractors

Mississippi general contractor · “Certificate of Responsibility, Building Construction classification

Statewide license

Verified September 17, 2026· 6 sources

Issued by Mississippi State Board of Contractors (MSBOC)

Mississippi's unlimited tier is the Certificate of Responsibility issued by the Mississippi State Board of Contractors in the Building Construction major classification. A commercial license is required of every contractor and subcontractor of any tier on a public or private project of $50,000 or more (Miss. Code Ann. 31-3-1), and Building Construction covers the construction of commercial buildings and single- or multiple-dwelling residential structures, together with additions, alterations, conversions, expansions, reconstruction, renovations and the associated landscaping, earthwork, parking areas, driveways and sidewalks. Holding the major classification entitles the licensee to perform every specialty classification listed beneath it; one classification is included in the application fee and each further one costs $100. The board states that it offers only an unlimited license, so there are no monetary limitation bands: instead every commercial applicant proves financial responsibility with a CPA-reviewed or audited statement showing a net worth of at least $50,000 for a major classification, or $20,000 for a specialty, with no bond substitute. The certificate belongs to the business and is qualified by a named person - an owner, officer or responsible managing employee who takes the examinations, must be genuinely employed by the certificate holder, and may qualify no more than three companies at once - so a contractor moving to Mississippi applies as or for the entity that will bid the work.

Moving to MississippiLeaving Mississippi

Why Illinois has nothing to transfer

Illinois general contractor · “No statewide license; local titles include Chicago General Contractor Class A, B or C

Licensed by cities and counties

Verified September 17, 2026· 18 sources

Illinois has no statewide general, commercial or building contractor license and no state board that examines or qualifies builders, so an out-of-state general contractor license has nothing at the state level to transfer into. The State does license pieces of the work: the Department of Financial and Professional Regulation licenses roofing contractors under the Illinois Roofing Industry Licensing Act, in a limited tier for residential buildings of eight units or less and an unlimited tier for residential, commercial and industrial roofs, and also licenses architects, professional and structural engineers, land surveyors and alarm contractors, while the Department of Public Health licenses plumbers, plumbing contractors and irrigation contractors and separate state programs cover elevator and fire sprinkler contractors. Commercial building itself is controlled by home rule municipalities through the building permit, and the City of Chicago's General Contractor license, graded Class A through E by project value, is by far the most consequential credential in the state. A general contractor arriving in Illinois gets licensed or registered in each jurisdiction where they will pull permits, carries the insurance and bonds those jurisdictions require, and makes sure the roofing, plumbing, electrical and mechanical scopes are performed under the correct state or municipal trade licenses.

How local licensing works in Illinois

How it works in Illinois. No Illinois agency issues a general, commercial, building or unlimited contractor license, and there is no Illinois qualifying party or state business-and-law exam for general building work. Home rule municipalities control commercial construction through the permit, and each one writes its own contractor ordinance, so a contractor is licensed or registered separately in every jurisdiction where they build. Where a city does license, the credential is generally based on insurance, financial solvency, entity documents and a fee rather than on a competence exam, and none of the programs reviewed recognizes a general contractor license issued by another state. What genuinely travels into Illinois is a state trade license: roofing under 225 ILCS 335, plumbing under the Department of Public Health, and the state elevator, fire sprinkler and alarm credentials, all of which cities check before they issue a permit.

Chicago. Chicago's General Contractor license is the one credential that shapes commercial work in Illinois. It is required to bid on, undertake, hire or supervise, or control the means and methods of any 'regulated activity' - work requiring a building, sign or demolition (wrecking) permit, a sewer permit, a Department of Public Health permit for sandblasting, grinding or chemical washing, work exempt from permit under Section 402 of the Chicago Construction Codes Administrative Provisions, or work under a stormwater management plan. Licenses go to businesses, including sole proprietorships, in five classes graded by project value, defined as 'the fair market value of materials and labor provided by all contractors and subcontractors as part of all concurrent and consecutive regulated activities at the same site': Class A unlimited value, ordinary or complex demolition, $5 million per occurrence of insurance, $3,500.00; Class B up to $20 million, ordinary or complex demolition, $3 million, $1,800.00; Class C up to $10 million, ordinary demolition, $2 million, $1,300.00; Class D up to $4 million, ordinary demolition, $2 million, $900.00; Class E up to $500,000, no demolition, $1 million, $300.00. The Class B, C and D project limits and the Class C and D insurance figures took effect January 1, 2026, and for Class C and D licenses issued before that date the higher insurance requirement is enforced when the policy on file expires. Commercial general liability must come from an insurer authorized in Illinois and rated B+ or higher by A.M. Best, covering bodily injury, personal injury, property damage and completed operations, with primary plus excess or umbrella policies allowed above $1 million; the full requirements are in Section 4-36-090 of the Municipal Code. The application also needs a statement of financial solvency on the supplied form, proof of authority to do business in Illinois, an Assumed Name Certificate where a trade name is used, and government photo identification for the controlling persons. There is no exam, no experience review and no qualifying party. Continental Testing Services handles applications and renewals by mail for the Department of Buildings; the license is valid one year and is automatically inactivated if the insurance policy lapses. A licensed general contractor's own employees and subcontractors under its supervision and control do not need their own general contractor license, but electrical, plumbing, mason, drain layer, elevator mechanic and board-up work must be done by the holders of those separate City licenses, and anyone contracting directly with the owner needs their own license and must be listed on the permit.

Cook County (unincorporated areas). Every contractor working in unincorporated Cook County registers with the Department of Building and Zoning: $150 per trade to start and $75 per trade annually by December 31, with $1,000,000 general liability naming Cook County Building and Zoning at 69 W. Washington, Suite 2830, Chicago as certificate holder. The owner or a corporate officer files, with the Articles of Incorporation or current Annual Domestic Report. Roofing registrants file the State of Illinois roofing license and demolition registrants a fully approved bond. No exam. Check the site against the county's CookViewer tool first, because much of suburban Cook County is incorporated and licensed by its own village.

Aurora. A General contractor registration costs $200 and consists of the Contractor Licensing Application, a certificate of insurance naming the City of Aurora as primary and non-contributory additional insured with $1,000,000 general aggregate and $500,000 per occurrence, statutory workers' compensation, and Secretary of State registration or a county DBA certificate. Aurora tests only electrical and mechanical contractors, accepting ICC certifications or licenses from named municipalities in place of its own exam; the General category has no test. Elevator, fire suppression, roofing and sign registrations are also $200, and a dumpster or right-of-way obstruction registration needs a $5,000 surety bond. Delinquent permits will block a renewal.

Evanston. General Contractor registration is $150 a year, renewable through the Citizen Portal, with general liability of at least $300,000 per occurrence, bodily injury and property damage of at least $100,000 per occurrence each, and workers' compensation at statutory minimums naming Evanston as certificate holder. Right-of-way work requires $1,000,000 per occurrence with the city as an additional insured. State-regulated contractors submit a copy of the state license. Trade registration is $125.

Joliet. Registration is required before any permit is issued but costs nothing: 'there are no forms or fees for registration, unless you are a Sign Erector or for HVAC Testing.' The requirement is a certificate of insurance naming the City of Joliet, with minimum limits of $250,000 bodily injury per person, $500,000 bodily injury per occurrence and $250,000 property damage per occurrence. Trade credentials are checked separately: the Illinois State Roofer's License for roofing, the Illinois Plumbing Contractor Registration for plumbing, the State of Illinois elevator license, the Illinois sprinkler (FSC) and private alarm licenses, and a municipal electrical or HVAC license from Joliet's accepted list. Concrete work in the right-of-way needs a $10,000 street obstruction bond and demolition a $50,000 wrecking bond. Electrical, plumbing and HVAC contractors file a project-specific Letter of Intent, and all subcontractors must be listed on the permit application.

Rockford. 'General contractors are not required to be licensed.' Rockford controls commercial work through the permit only, and enforces the State roofing license: 'roofing contractors are required to obtain a license from the State of Illinois Department of Professional Regulation.'

Springfield. The Building and Zoning Department publishes electrical and mechanical contractor license and registration applications and no general contractor registration at all; its building permit application asks for the general contractor's name and address but for a license number only on the roofing line. Building and Zoning, 300 South 7th Street, Room 304, (217) 789-2171.

Peoria. Peoria licenses electrical and HVAC contractors individually at $150.00 each, on an open-book ICC exam or a Normal or Pekin license, plus boiler tenders and stationary engineers. Its four Contractor Business Licenses cover parking lot paving, sidewalks and driveways, right-of-way dumpsters and sewer connections, at $25.00 or $60.00 a year with $5,000 or $10,000 license and permit bonds. There is no general building contractor license.

Everywhere else. Every other Illinois city, village and county sets its own rules; many suburban villages register contractors and charge an annual fee, while others require only a permit and proof of insurance. Confirm the requirement, the current fee and the insurance limits with each building department before you bid work there.

Moving to IllinoisLeaving Illinois

Common questions

Do I have to take the Mississippi general contractor exam if I'm licensed in Illinois?
The trade exam is waived, but Mississippi requires a law or code exam.
How long do I need to have held my Illinois license?
At least 1 year before applying.
What does it cost to get a Mississippi general contractor license from Illinois?
Published fees on this path total $520, not counting exam vendor fees or bonds.
Do my Illinois work hours count in Mississippi?
Yes. Documented out-of-state experience counts toward Mississippi's eligibility requirements.
How long does the application take?
The board's published or typical processing time is about 7 days.
Does it work the other way, from Mississippi to Illinois?
Not necessarily. Reciprocity is directed. Going from Mississippi to Illinois, the mechanism is not applicable.

Sources

  1. Mississippi State Board of Contractors - Classifications (Building Construction; Residential Builder; Residential Remodeler) · Miss. Code Ann. 31-3-13(h) (cited on the page) · Mississippi State Board of Contractors · Agency Page · verified September 17, 2026
  2. MSBOC Commercial Application for a Certificate of Responsibility (2026 revision) · Mississippi State Board of Contractors · Form · verified September 17, 2026
  3. Mississippi Commercial Contractor Laws and Rules (Miss. Code Title 31 Chapter 3 and Board Rules Part 802) · Miss. Code Ann. 31-3-1, 31-3-13, 31-3-15, 31-3-17; 30 Miss. Admin. Code Pt. 802, R. 1.1 · Mississippi State Board of Contractors · Admin Rule · verified September 17, 2026
  4. Mississippi State Board of Contractors - Frequently Asked Questions · Mississippi State Board of Contractors · Faq · verified September 17, 2026
  5. MSBOC Fee Schedule effective January 1, 2016 · Mississippi State Board of Contractors · Form · verified September 17, 2026
  6. Mississippi State Board of Contractors - Apply for a License (commercial and residential) · Mississippi State Board of Contractors · Agency Page · verified September 17, 2026
  7. State of Mississippi Contractor Examinations - PSI Candidate Information Bulletin · PSI Services LLC for the Mississippi State Board of Contractors · Other · verified September 17, 2026
  8. Mississippi State Board of Contractors - Reciprocity (trade-exam waiver agreements by origin board) · Miss. Code Ann. 73-50-1 and 73-50-2 (referenced on the page) · Mississippi State Board of Contractors · Agency Page · verified September 17, 2026
  9. Mississippi State Board of Contractors - What You Need to Know About Testing · Mississippi State Board of Contractors · Agency Page · verified September 17, 2026
  10. MSBOC Form UROL - Waiver of Exam pursuant to the Universal Recognition of Occupational Licenses Act · Miss. Code Ann. 73-50-2 · Mississippi State Board of Contractors · Form · verified September 17, 2026
  11. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related