Illinois to North Dakota: general contractor license reciprocity
Illinois does not issue a statewide general contractor license, so there is nothing to transfer. Here is North Dakota's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Contractor license for every applicant, wherever they come from (all states)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
An unlimited or general contractor license from another state gives an applicant no advantage in North Dakota, and none is needed. Whatever the size of the project, North Dakota asks for a sworn application naming the class of license sought, a signed statement of the applicant's experience and qualifications, a certificate of liability insurance with the Secretary of State named as certificate holder, a Workforce Safety and Insurance certificate of payment or letter of good standing, and the class fee, which is $450 for class A with no limit on project value. Because there is no trade examination, no business and law examination, no experience threshold, no bond and no financial responsibility test, there is nothing for an out-of-state credential to be measured against or to replace. A contractor based in another state applies on the same terms as a resident and does not have to move here, but a nonresident appoints the registrar as their agent for service of process by signing the application unless they are already registered here as a foreign corporation, limited liability company or partnership with a registered agent on file. The Secretary of State publishes no reciprocity agreement and no endorsement route for the contractor license.
The class letters are a contract-value cap and not a skill grading, so they are chosen rather than earned: class A is unlimited, class B stops at $500,000, class C at $300,000 and class D at $100,000 for any single contract project, and a contractor may renew under a different class by paying that class's issue fee. On public work the class matters at the bid: a contract may not be awarded unless the contractor holds a license in the class the project's value falls within, the license must have been held at least ten days before the date set for receiving bids, and a copy of the license or current-year certificate goes in the bid bond envelope or the bid is returned unread. Bids to the Department of Transportation and the Public Service Commission, and federal-aid highway work, are outside that rule, and a public contract also needs a tax commissioner certificate showing no delinquent income, sales or use taxes. Two apparent routes are dead ends. The word reciprocal appears once in the contractor chapter, at NDCC 43-07-22, and it lets the labor commissioner make arrangements with another state about the North Dakota resident hiring preference on public construction contracts, not about licensure. And North Dakota does not accept the NASCLA Accredited Examination for Commercial General Building Contractors and is not among the participating agencies, which follows from there being no North Dakota contractor examination for it to replace.
At a glance
- Trade exam
- Waived
- Law / code exam
- Not required
- Out-of-state hours
- Do not count
What you must already have
- No examination, minimum experience, work history review, education, continuing education, financial statement or qualifying party is required, however large the project. The class letter caps the value of a single contract project and is chosen on the application; class A carries no limit at all.NDCC 43-07-04(1) sets out the complete application contents and NDCC 43-07-07(1) sets the class limits. The Secretary of State's contractor page prints the same list and adds no examination, bond, net worth figure or responsible managing individual. The old classes-of-licenses section, 43-07-05, was repealed in 2015.
- The applicant must be eighteen or older and must sign the application under oath, including a statement of their own experience and qualifications as a contractor and the class of license sought. North Dakota sets no threshold for that experience and does not check it against another state's license or classification.NDCC 43-07-04(1). Out-of-state experience is described in that statement like any other experience; the registrar may deny a license where an application contains false or misleading information, so it should be described accurately.
- You must have no disciplinary action or unresolved complaints on your record.NDCC 43-07-04.1, with the rehabilitation test in NDCC 12.1-33-02.1 and a right of appeal to district court. Discipline under NDCC 43-07-15 runs to a civil penalty of up to $1,000, restitution of up to $5,000 and suspension of up to sixty months, and any penalty or restitution must be paid before a license is renewed, reinstated or newly issued.
What you'll do to get licensed in North Dakota
- 1Application fee. Pay the application fee ($450). License fee for a class A license, which carries no limitation on the value of any single contract project. The other classes are cheaper because they are capped: class B $300 up to $500,000 per job, class C $225 up to $300,000 per job and class D $100 up to $100,000 per job. Renewal is $90 for class A and $60, $45 or $30 for classes B, C and D. A contractor may apply at renewal for a different class than the one previously held by paying the issue fee for the new class. A name change costs $10 and must be reported to the registrar within ten days..
- 2Insurance. Carry the required insurance. Certificate of liability insurance filed with the application, issued in the same name the contractor license is requested in and listing the North Dakota Secretary of State, 600 E Boulevard Ave, Dept 108, Bismarck, ND 58505, as the certificate holder. No minimum policy limit is set in the statute or published on the Secretary of State's page, so the state does not publish one; ask the Secretary of State on 701-328-2900 or 800-352-0867 what its reviewers accept, and expect owners, lenders and construction managers on commercial work to require far higher limits by contract. Coverage must be maintained and refiled at renewal; failing to maintain it puts the license out of good standing and leads to revocation if it is not cured within thirty days..
- 3Insurance. Carry the required insurance. Workforce Safety and Insurance coverage, evidenced by a statement from WSI that coverage satisfactory to WSI has been secured. A contractor with employees residing in North Dakota files a current WSI certificate of payment; a contractor with no North Dakota resident employees who does not meet the tests of significant contact files a WSI letter of good standing instead. At renewal the contractor certifies that all payroll taxes, including North Dakota income tax, WSI premiums and unemployment insurance premiums due at the time of renewal have been submitted..
- 4Business license. Obtain a business license. Business registration with the Secretary of State, completed before the license application because the name on the application must match the business registration. A corporation, limited liability company or other entity must register, an out-of-state company registers as a foreign corporation, LLC, LLP or limited partnership, and a sole proprietor or general partnership may need a trade name or fictitious partnership name registration. Letting any of those registrations lapse is a listed ground for the registrar to classify the contractor license as not in good standing, which requires the contractor to stop soliciting or entering new projects and leads to revocation if it is not cured within thirty days..
- 5Financial responsibility. Show financial responsibility (if applicable). North Dakota requires no financial statement, net worth figure, working capital figure or credit report for a contractor license at any class, including class A. The class letter is a cap on the value of a single contract project that the applicant selects and pays for, not a financial qualification the registrar assesses. Public owners may impose their own financial and prequalification conditions on top of the license: any administrative or governing body with power to enter public contracts may set reasonable additional requirements as a condition of awarding a public works contract..
- 6Background check. Complete a background check (if applicable). Not part of the standard filing. The registrar may require any other information needed to determine eligibility to act as a contractor, expressly including criminal history record information about the applicant or the officers, members or partners of a business applicant, held by the North Dakota Bureau of Criminal Investigation or a similar agency in another state, at the applicant's expense. Failing or refusing to authorize or pay for that information is a ground to refuse the license..
- 7Surety bond. Post a surety bond (if applicable). No surety bond is required for the contractor license itself; the bond section of the contractor statute was repealed in 1995. Bonding is still a fact of commercial life in North Dakota: a bid for a public contract project must enclose a copy of the license in the bid bond envelope, public owners may impose their own bonding conditions, and private owners and lenders commonly require performance and payment bonds by contract..
- 8Other. Ongoing obligations once licensed. The license number must be supplied to the permit-issuing official on every building permit application. A public contract with the state or any political subdivision additionally requires a certificate from the tax commissioner showing no delinquent income, sales or use taxes. The license runs to the end of the contractor year on March 1 and is renewed by filing a list of every project, contract or subcontract over $50,000 completed in North Dakota in the preceding calendar year, the nature of that work, a current liability insurance certificate and the payroll tax certification, with the renewal fee; that project list is forwarded to the state tax commissioner. Missing the March 1 deadline leaves the contractor unlicensed until they renew, which is possible until June 1 on payment of a $50 penalty plus the renewal fee, after which the license is expired..
Published fees on this path total $450, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · if applicable
How North Dakota licenses general contractors
North Dakota general contractor · “Contractor License, class A (no limit on project value) through class D”
Statewide license
Issued by North Dakota Secretary of State (Registrar of Contractors)
North Dakota has one contractor license for every kind of building work, issued by the Secretary of State as registrar of contractors, and it is the same license a homebuilder holds: the difference between a commercial general contractor and a residential builder here is the class letter they choose, not a different credential. A license is required of anyone whose job exceeds $4,000 in cost, value or price, including subcontractors, public contractors and nonresident contractors, and an unlicensed contractor cannot maintain a claim or lawsuit in a North Dakota court over the contracting business. The class letter caps the value of a single contract project: class A carries no limit, class B stops at $500,000, class C at $300,000 and class D at $100,000, so an unlimited or commercial builder applies for class A, and on a public contract the license must be in the class the project's value falls within and must have been held at least ten days before the bid date. There is no examination, no experience or work history review, no bond, no financial statement, no net worth or working capital test and no qualifying party or responsible managing individual: the license is issued to the individual or business that contracts, on proof of liability insurance and Workforce Safety and Insurance coverage. Electrical and plumbing work are licensed separately by the North Dakota State Electrical Board and the North Dakota State Plumbing Board, so any of that scope must be performed under the right board license.
Why Illinois has nothing to transfer
Illinois general contractor · “No statewide license; local titles include Chicago General Contractor Class A, B or C”
Licensed by cities and counties
Illinois has no statewide general, commercial or building contractor license and no state board that examines or qualifies builders, so an out-of-state general contractor license has nothing at the state level to transfer into. The State does license pieces of the work: the Department of Financial and Professional Regulation licenses roofing contractors under the Illinois Roofing Industry Licensing Act, in a limited tier for residential buildings of eight units or less and an unlimited tier for residential, commercial and industrial roofs, and also licenses architects, professional and structural engineers, land surveyors and alarm contractors, while the Department of Public Health licenses plumbers, plumbing contractors and irrigation contractors and separate state programs cover elevator and fire sprinkler contractors. Commercial building itself is controlled by home rule municipalities through the building permit, and the City of Chicago's General Contractor license, graded Class A through E by project value, is by far the most consequential credential in the state. A general contractor arriving in Illinois gets licensed or registered in each jurisdiction where they will pull permits, carries the insurance and bonds those jurisdictions require, and makes sure the roofing, plumbing, electrical and mechanical scopes are performed under the correct state or municipal trade licenses.
How local licensing works in Illinois
How it works in Illinois. No Illinois agency issues a general, commercial, building or unlimited contractor license, and there is no Illinois qualifying party or state business-and-law exam for general building work. Home rule municipalities control commercial construction through the permit, and each one writes its own contractor ordinance, so a contractor is licensed or registered separately in every jurisdiction where they build. Where a city does license, the credential is generally based on insurance, financial solvency, entity documents and a fee rather than on a competence exam, and none of the programs reviewed recognizes a general contractor license issued by another state. What genuinely travels into Illinois is a state trade license: roofing under 225 ILCS 335, plumbing under the Department of Public Health, and the state elevator, fire sprinkler and alarm credentials, all of which cities check before they issue a permit.
Chicago. Chicago's General Contractor license is the one credential that shapes commercial work in Illinois. It is required to bid on, undertake, hire or supervise, or control the means and methods of any 'regulated activity' - work requiring a building, sign or demolition (wrecking) permit, a sewer permit, a Department of Public Health permit for sandblasting, grinding or chemical washing, work exempt from permit under Section 402 of the Chicago Construction Codes Administrative Provisions, or work under a stormwater management plan. Licenses go to businesses, including sole proprietorships, in five classes graded by project value, defined as 'the fair market value of materials and labor provided by all contractors and subcontractors as part of all concurrent and consecutive regulated activities at the same site': Class A unlimited value, ordinary or complex demolition, $5 million per occurrence of insurance, $3,500.00; Class B up to $20 million, ordinary or complex demolition, $3 million, $1,800.00; Class C up to $10 million, ordinary demolition, $2 million, $1,300.00; Class D up to $4 million, ordinary demolition, $2 million, $900.00; Class E up to $500,000, no demolition, $1 million, $300.00. The Class B, C and D project limits and the Class C and D insurance figures took effect January 1, 2026, and for Class C and D licenses issued before that date the higher insurance requirement is enforced when the policy on file expires. Commercial general liability must come from an insurer authorized in Illinois and rated B+ or higher by A.M. Best, covering bodily injury, personal injury, property damage and completed operations, with primary plus excess or umbrella policies allowed above $1 million; the full requirements are in Section 4-36-090 of the Municipal Code. The application also needs a statement of financial solvency on the supplied form, proof of authority to do business in Illinois, an Assumed Name Certificate where a trade name is used, and government photo identification for the controlling persons. There is no exam, no experience review and no qualifying party. Continental Testing Services handles applications and renewals by mail for the Department of Buildings; the license is valid one year and is automatically inactivated if the insurance policy lapses. A licensed general contractor's own employees and subcontractors under its supervision and control do not need their own general contractor license, but electrical, plumbing, mason, drain layer, elevator mechanic and board-up work must be done by the holders of those separate City licenses, and anyone contracting directly with the owner needs their own license and must be listed on the permit.
Cook County (unincorporated areas). Every contractor working in unincorporated Cook County registers with the Department of Building and Zoning: $150 per trade to start and $75 per trade annually by December 31, with $1,000,000 general liability naming Cook County Building and Zoning at 69 W. Washington, Suite 2830, Chicago as certificate holder. The owner or a corporate officer files, with the Articles of Incorporation or current Annual Domestic Report. Roofing registrants file the State of Illinois roofing license and demolition registrants a fully approved bond. No exam. Check the site against the county's CookViewer tool first, because much of suburban Cook County is incorporated and licensed by its own village.
Aurora. A General contractor registration costs $200 and consists of the Contractor Licensing Application, a certificate of insurance naming the City of Aurora as primary and non-contributory additional insured with $1,000,000 general aggregate and $500,000 per occurrence, statutory workers' compensation, and Secretary of State registration or a county DBA certificate. Aurora tests only electrical and mechanical contractors, accepting ICC certifications or licenses from named municipalities in place of its own exam; the General category has no test. Elevator, fire suppression, roofing and sign registrations are also $200, and a dumpster or right-of-way obstruction registration needs a $5,000 surety bond. Delinquent permits will block a renewal.
Evanston. General Contractor registration is $150 a year, renewable through the Citizen Portal, with general liability of at least $300,000 per occurrence, bodily injury and property damage of at least $100,000 per occurrence each, and workers' compensation at statutory minimums naming Evanston as certificate holder. Right-of-way work requires $1,000,000 per occurrence with the city as an additional insured. State-regulated contractors submit a copy of the state license. Trade registration is $125.
Joliet. Registration is required before any permit is issued but costs nothing: 'there are no forms or fees for registration, unless you are a Sign Erector or for HVAC Testing.' The requirement is a certificate of insurance naming the City of Joliet, with minimum limits of $250,000 bodily injury per person, $500,000 bodily injury per occurrence and $250,000 property damage per occurrence. Trade credentials are checked separately: the Illinois State Roofer's License for roofing, the Illinois Plumbing Contractor Registration for plumbing, the State of Illinois elevator license, the Illinois sprinkler (FSC) and private alarm licenses, and a municipal electrical or HVAC license from Joliet's accepted list. Concrete work in the right-of-way needs a $10,000 street obstruction bond and demolition a $50,000 wrecking bond. Electrical, plumbing and HVAC contractors file a project-specific Letter of Intent, and all subcontractors must be listed on the permit application.
Rockford. 'General contractors are not required to be licensed.' Rockford controls commercial work through the permit only, and enforces the State roofing license: 'roofing contractors are required to obtain a license from the State of Illinois Department of Professional Regulation.'
Springfield. The Building and Zoning Department publishes electrical and mechanical contractor license and registration applications and no general contractor registration at all; its building permit application asks for the general contractor's name and address but for a license number only on the roofing line. Building and Zoning, 300 South 7th Street, Room 304, (217) 789-2171.
Peoria. Peoria licenses electrical and HVAC contractors individually at $150.00 each, on an open-book ICC exam or a Normal or Pekin license, plus boiler tenders and stationary engineers. Its four Contractor Business Licenses cover parking lot paving, sidewalks and driveways, right-of-way dumpsters and sewer connections, at $25.00 or $60.00 a year with $5,000 or $10,000 license and permit bonds. There is no general building contractor license.
Everywhere else. Every other Illinois city, village and county sets its own rules; many suburban villages register contractors and charge an annual fee, while others require only a permit and proof of insurance. Confirm the requirement, the current fee and the insurance limits with each building department before you bid work there.
- Chicago (Department of Buildings - General Contractor license, Classes A-E)
- Chicago (Department of Buildings - Trade Licensing index for the separate trade contractor licenses)
- Cook County (Department of Building and Zoning - contractor registration, unincorporated areas)
- Aurora (Division of Building and Permits - General contractor registration)
- Evanston (Building and Inspection Services - General Contractor registration)
- Joliet (Building and Inspectional Services - contractor registration, no fee)
- Rockford (Construction and Development Services - general contractors not licensed)
- Springfield (Building and Zoning Department - electrical and mechanical registrations only)
- Peoria (Contractor Business Licenses and Trade Licenses)
- Naperville (City of Naperville - Permits and Licenses)
Common questions
- Do I have to take the North Dakota general contractor exam if I'm licensed in Illinois?
- No. The trade exam is waived on this path.
- What does it cost to get a North Dakota general contractor license from Illinois?
- Published fees on this path total $450, not counting exam vendor fees or bonds.
- Do my Illinois work hours count in North Dakota?
- No. North Dakota does not credit out-of-state hours on this path.
- Does it work the other way, from North Dakota to Illinois?
- Not necessarily. Reciprocity is directed. Going from North Dakota to Illinois, the mechanism is not applicable.
Sources
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- North Dakota Century Code Chapter 43-07 - Contractors · NDCC 43-07-01, 43-07-02, 43-07-04, 43-07-04.1, 43-07-07, 43-07-08, 43-07-09, 43-07-10, 43-07-11, 43-07-12, 43-07-19, 43-07-22, 43-07-24 · North Dakota Legislative Branch · Statute · verified September 17, 2026
- North Dakota State Electrical Board - Home (license types and reciprocal license agreements) · North Dakota State Electrical Board · Agency Page · verified September 17, 2026
- North Dakota Secretary of State - Contractors (licensing, classes, fees and renewal) · NDCC ch. 43-07 · North Dakota Secretary of State · Agency Page · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.