Indiana to Washington: general contractor license reciprocity
Indiana does not issue a statewide general contractor license, so there is nothing to transfer. Here is Washington's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Everyone registers the same way; an out-of-state contractor license transfers nothing
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
A commercial or general contractor licensed in another state gains nothing from that license in Washington and loses nothing by not having one. L&I does not evaluate out-of-state credentials for contractor registration, publishes no reciprocity or endorsement route, and has nothing to waive, because Washington holds no contractor examination and sets no experience requirement. Washington is not one of the state agencies that accept the NASCLA Accredited Examination for Commercial General Building Contractors, for the same reason. An arriving contractor therefore follows the ordinary route: file a Business License Application with the Department of Revenue for a UBI (after filing with the Secretary of State if the business is a corporation, LLP or LLC, including one formed in another state), file a continuous $30,000 contractor surety bond or an assigned savings account for that amount with the State of Washington as obligee, file a certificate of general liability insurance naming L&I as certificate holder, submit the notarized Application for Construction Contractor Registration (F625-001-000) with a notarized affidavit from every principal, and pay $150.20 for a two-year registration. The business name must match exactly across the application, the bond and the insurance certificate. Applications mailed to Olympia take about three to four weeks to process; applications completed at a local L&I office are handled at the counter, and the registration card arrives about two weeks later.
An out-of-state business should also contact L&I's extraterritorial specialists at [email protected] or 360-902-4817 about reporting hours worked in Washington: L&I has workers' compensation reciprocal agreements with several neighboring states, but those agreements are about industrial insurance rather than licensing, and the construction industry is carved out of some of them. The statutory bond is a consumer-protection device, not a measure of capacity, so a large commercial contractor may still need far higher bonds by contract or under the public works statutes; the figures here are only what registration requires. Public agencies may not contract with an unregistered contractor (RCW 18.27.111).
At a glance
- Trade exam
- Waived
- Law / code exam
- Not required
- Out-of-state hours
- Do not count
- Typical processing
- About 28 days
What you must already have
- Every owner, member, partner and corporate officer must be at least 18 and provide a Social Security number or individual taxpayer identification number, a government-issued photo ID number and a residential address, and must sign the application before a notary public.RCW 18.27.030(1)(a) and (g), with the age and notarization requirements stated in the instructions to form F625-001-000.
- The application is denied if a principal has an unsatisfied final judgment for work subject to chapter 18.27 RCW or owes certain unpaid debts to L&I, or if the business is a successor operating with all or part of the assets of a previously registered entity under substantially common ownership, management or control that has such a judgment or debt.
- No examination result, trade experience, education, apprenticeship or financial statement is asked for at any point, so an out-of-state license, a NASCLA examination transcript and documented years in business are all equally irrelevant to the decision.
What you'll do to get licensed in Washington
- 1Application fee. Pay the application fee ($150.20). Contractor registration issuance fee (WAC 296-200A-900(1)). The registration is valid for two years from issuance and renews for the same $150.20; reinstatement after a suspension costs $70.90 and a duplicate certificate costs $16.50. L&I mails a renewal notice no more than 45 days before expiry, and it is the contractor's duty to notify the department in writing within ten days of any change of address..
- 2Surety bond. Post a surety bond ($30,000). Continuous Contractor's Surety Bond (F625-003-000) in the sum of $30,000 for a general contractor, issued by a surety insurer meeting chapter 48.28 RCW and naming the State of Washington as obligee. The original, uncorrected bond must be filed with L&I with the bonding company's seal, or filed electronically by the surety, and it must carry the exact business name on file. An assigned savings account for the same amount (form F625-008-000) held at a bank, savings and loan or credit union with a Washington branch may be posted instead. The bond answers claims by workers, the state for taxes and contributions, suppliers and customers; cancellation suspends the registration automatically, and a contractor that switches from a general to a specialty registration may not reduce the bond amount for two years..
- 3Insurance. Carry the required insurance ($250,000). General liability insurance of $200,000 public liability and $50,000 property damage, or a $250,000 combined single limit policy, written in the exact business name with L&I named as certificate holder. The statute states it as $50,000 for property damage, $100,000 for injury or death to any one person and $200,000 for injury or death to more than one person. Certificates reach L&I by mail, through the designated insurance agent portal or in person, never by email or fax, and an assigned account in the statutory amounts may be filed instead as proof of financial responsibility. Cancellation or expiry automatically suspends the registration..
- 4Business license. Obtain a business license. A Washington Business License Application filed with the Department of Revenue Business Licensing Service, producing the nine-digit Uniform Business Identifier (UBI) required on the registration application and required to stay active and valid throughout. A corporation, limited partnership, LLP or LLC formed in another state registers with the Washington Secretary of State first, and a copy of the Secretary of State certificate is filed with L&I. L&I will not process the registration until it verifies that the business license application has been filed and an excise tax account is open. The Department of Revenue's application fee varies with the endorsements the business needs and is not published as a single figure; see dor.wa.gov for the current processing fee..
- 5Other. Notarized Application for Construction Contractor Registration (F625-001-000), with an individually notarized affidavit of signature from each owner, member, partner and corporate officer. All signatures must be original, so a copy or an emailed application is not accepted; file it in person at a local L&I office or mail it to Contractor Registration, PO Box 44450, Olympia WA 98504-4450 with the bond, the insurance certificate and the fee..
- 6Other. Workers' compensation coverage and an employment security department number if the business will have employees in Washington; a business with no Washington employees may substitute its UBI account number. An applicant domiciled in a state or Canadian province covered by an extraterritorial workers' compensation agreement may file that jurisdiction's certificate of coverage instead of opening a Washington industrial insurance account (RCW 18.27.030(1)(c)(iii)). An employer identification number is needed from the IRS unless the applicant is a sole proprietor with no employees..
- 7Other. Model Disclosure Statement, Notice to Customer (F625-030-000), required on every residential job of $1,000 or more and on commercial projects of $1,000 to $60,000; failing to give it can cost the contractor its lien rights. The registration number must appear on all business communications, including advertising, bids, estimates and business cards, and a city, town or county may not issue a building permit without verifying that the contractor is registered..
- 8Other. Separate trade licensing where the work calls for it. Contractor registration does not authorize plumbing, electrical, elevator, boiler, asbestos or mobile home installation work; each carries its own education, examination and licensing requirements, and electrical contracting is licensed under chapter 19.28 RCW rather than as a registration specialty. A general contractor may meet these by subcontracting to, or employing, the appropriately licensed firm or certified tradesperson. (if applicable).
Published fees on this path total $150.20, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $30,000
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · $250,000
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Washington licenses general contractors
Washington general contractor · “General Contractor Registration”
Statewide license
Issued by Washington State Department of Labor & Industries, Contractor Registration
Washington's unlimited tier is the General contractor registration issued by the Department of Labor & Industries, and it is the same credential described at the residential level: one registration covers both house and commercial work, because Washington draws no residential/commercial line. A general contractor is defined by trade breadth rather than by market or contract value: it is a contractor 'whose business operations require the use of more than one building trade or craft upon a single job or project or under a single building permit', including anyone who superintends or consults on such work, while a specialty contractor is limited to one of 63 named trades and may subcontract only work incidental to that trade. There is no dollar cap, no classification letter and no project-size tier on a general registration. Washington does not examine contractors at all: chapter 18.27 RCW and chapter 296-200A WAC contain no trade exam, no business-and-law exam, no experience requirement, no net worth or financial statement test and no qualifying party, and L&I's application asks for none of them. What the state requires is a registered business with money behind it, which the department verifies rather than judges: a Uniform Business Identifier from the Department of Revenue, a continuous $30,000 surety bond (or an assigned savings account for the same amount), general liability insurance of $200,000 public liability and $50,000 property damage or $250,000 combined single limit, a notarized application signed by every owner, member, partner and officer, and $150.20 for two years. Registration is required of every contractor with almost no threshold: the only general exemption is work on a single project whose total price for labor, materials and everything else is under $500, and even that is lost if the person advertises as a contractor. Registration is statewide and exclusive; RCW 18.27.130 bars any city or county from issuing its own contractor registration, license or bond, though a city may still charge a general business license fee and a gross receipts tax, and a building department must verify a contractor's registration before it issues a permit.
Why Indiana has nothing to transfer
Indiana general contractor · “General Contractor / Building General Contractor / Commercial General (city- or county-issued)”
Licensed by cities and counties
Issued by No state authority; cities and counties license or register commercial building contractors
Indiana has no statewide general, commercial or unlimited building contractor license, so there is nothing at state level for an out-of-state general contractor's license to transfer into. The Indiana Professional Licensing Agency's published list of licensed professions has no contractor program of any kind, and the Indiana Department of Homeland Security's Division of Fire and Building Safety enforces the building code and inspects boilers, elevators and fire safety devices without licensing the people who build. The credentials Indiana does issue at state level that a commercial builder may need are the Indiana Plumbing Commission's Journeyman Plumber and Plumbing Contractor licenses, plus manufactured home installer registration; electrical and HVAC work is licensed by cities and counties rather than by the state, so those trades qualify locally too. Commercial building is therefore controlled through city and county ordinances, and they differ sharply: Fort Wayne and Allen County issue a General Contractors License that is "unlimited in building contracting scope" and a Building Contractors License for commercial and multi-family work of three stories or less, both on a written examination; Evansville examines a Building General Contractor for multi-family, commercial and industrial work; Hammond tests for a Commercial General license; Indianapolis and South Bend require only a bonded, insured company license or registration; and Monroe County, covering Bloomington, asks nothing of general contractors beyond a voluntary sign-up. Indiana is not a NASCLA participating state and no Indiana jurisdiction reviewed publishes a route that converts an out-of-state contractor license into a local one, so an arriving general contractor qualifies separately in each jurisdiction where it will pull permits.
How local licensing works in Indiana
How it works in Indiana. No Indiana agency issues a general, commercial or unlimited building contractor license, and there is no state qualifying party, no state business-and-law exam and no NASCLA route, because Indiana is not a NASCLA participating state. Cities and counties control commercial construction through the building permit, and what they require ranges from a full board examination to nothing at all. Where a jurisdiction does examine, it writes its own test on its own adopted code edition, so passing in one Indiana city does not satisfy the next one. Out-of-state experience and an out-of-state license generally carry no weight; Allen County is the only jurisdiction below whose rules even contemplate reciprocity, and it still requires the applicant to meet the county's own minimum qualifications.
Indianapolis and Marion County. The Department of Business and Neighborhood Services issues one General Contractor license covering commercial and residential work, on the same form that carries the Electrical, HVAC, Plumbing and Wrecking types. The filing is proof of business registration, a certificate of insurance naming the Consolidated City of Indianapolis and Marion County as certificate holder and additional insured with general liability of at least $500,000 for each occurrence of death or bodily injury and $100,000 for each occurrence of property damage or $500,000 per occurrence combined, worker's compensation or an exemption waiver, and a typed $10,000 license or permit surety bond naming "Consolidated City of Indianapolis and/or an Unknown Third Party" as obligee. Licenses expire December 31 of even-numbered years; the new-license fee is prorated across the two-year term ($247.00, $185.00 and $124.00 at the three stages in the current packet) and renewal is $247.00, with up to five authorized permit-pulling agents included and $63.00 for each one beyond that. New licensees attend an orientation class within 60 days. The packet imposes no exam, experience or qualifying-individual requirement - unlike the city's Electrical and HVAC packets, which require a craft license holder who has passed the board's examination. Contractor Licensing, 200 E. Washington St., Suite 107, (317) 327-1291, [email protected].
Fort Wayne and Allen County. Under Allen County Code 6-1-3-3 the Building Department issues two commercial tiers. The General Contractors License covers "the erection of new structures or all new additions to existing structures and all remodeling, repair, and demolition of existing structures" and is "unlimited in building contracting scope," carrying with it the building, residential, home improvement and sub-contractor scopes. The Building Contractors License covers the same activities for "commercial structures or multiple-dwelling residential buildings" and is "unlimited in building contracting remodeling and limited to three stories or less of new building construction and additions in scope." Each is a personal license that qualifies one business registration - the rules allow a holder to qualify only one entity absent documented ownership of others - and the contractor must separately register a full-time Superintendent as the responsible supervisor named on each permit. Examinations are required for licensure, prepared or administered by the Building Commissioner or an approved testing facility; the exam fee is set by the Commissioner and not printed in the rules. Annual fees are $90.00 for the General Contractors license, $90.00 for the Building Contractors license and $25.00 for each Superintendent registration, expiring December 31. There is one genuinely national shortcut: a Regional/National Account Contractors Registration at $250.00, under which "the Building Commissioner may grant a single project registration to general contractors who travel for regional or national account work in lieu of taking the required contractor's test." It applies only where the brand business hires the contractor directly, never to developer-hired contractors or prime subcontractors, and it requires the application form, company and project-manager and superintendent resumes, a list of planned subcontractors and a client letter verifying comparable projects. Allen County's reciprocity section grants reciprocity subject to the guidelines for the trade and still requires the county's minimum qualifications, with Commissioner discretion for applicants who present evidence of the necessary credentials; those guidelines are not published, so confirm with the Building Department first.
Evansville. The Building Commission issues a Building General Contractor license for "wrecking, constructing, installing, repairing, remodeling, or servicing any structural or nonstructural portions of any multi-family residential, commercial, or industrial building, including all roof coverings and site work." The route is an application with three letters of recommendation proving at least four years of experience, board approval to test, then an open-book examination scheduled and paid through Ivy Tech at (812) 429-9852, with 70 percent to pass for contractor categories. A provisional license issues on payment plus proof of insurance and bond, and the Licensing and Disciplinary Board grants final approval on the fourth Thursday of the month. A commercial general contractor must carry general liability insurance of at least $1,000,000, post a $25,000 surety bond on the Commission's own form and show worker's compensation coverage or an affidavit, within six months of passing the exam. Published fees are $360.00 new, $210.00 renewal and $400.00 for a two-year renewal. Holding the Building General Contractor license removes the need for the separate subcontractor licenses on commercial work.
South Bend and St. Joseph County. Every contractor and subcontractor working in St. Joseph County or the City of South Bend must be registered or licensed with the Building Department, and commercial builders use the same single Building Contractor Registration as residential ones. It is the Pre-Licensing Registration Form, a $5,000 surety bond and a $125 registration fee, issued at the counter with no exam and no experience review; only Electrical and HVAC applicants file a full packet, pay a $50 application review fee and wait ten business days. Building Department, 215 S. Dr. Martin Luther King, Jr., Suite 100, [email protected], 574.235.9554.
Hammond and Lake County. Hammond issues a Commercial General contractor license on examination. The test is given on the first Monday of the month at 10:00 a.m. at the Hammond Sportsplex, open book with calculators, one hour, 70 percent to pass, on the 2012 IBC for the commercial paper. The examination fee is $100 and non-refundable, a missed sitting costs $50 to re-take, and the application is due a week ahead with a $20 limited criminal history report from the Hammond Police Department. Approval also requires attendance at the Building Contractors Board at 6:00 p.m. on the first Monday of the month. The licensee then files a certificate of insurance naming the City of Hammond with liability of 100,000/300,000 bodily injury and 50,000 property damage, worker's compensation or a waiver, and a $5,000 license and permit bond in the name of the "Board of Lake County Commissioners, all Cities, Towns and Municipalities of Lake County, Indiana," recorded at the Lake County Recorder's Office in Crown Point. The license is $200.00 initially and $100.00 to renew between January 1 and January 31; it expires December 31 and is void if not renewed by June 30. An out-of-state corporation must file a Certificate of Foreign Registration with the Indiana Secretary of State, and a $10,000 street opening bond is mandatory for plumbing, boring and underground utility work.
Bloomington and Monroe County. Commercial permits for the Bloomington area come from the Monroe County Building Department. The county licenses plumbing and electrical work and registers design professionals, but its general contractor record is expressly optional: "this application is voluntary and includes a sign up of General Contractors in the Monroe County area ... there are no fees or attachments required to sign up." County licensees carry public liability and property damage insurance naming Monroe County as an additional assured at $500,000 combined single limit, or $500,000 per occurrence for injury or death plus $100,000 for property damage, and worker's compensation unless they have no employees. Building Department, 501 N. Morton Street, Suite 220, (812) 349-2580.
Everywhere else. Other Indiana cities and counties set their own contractor ordinances, and many require only a permit and proof of insurance. Before bidding work, ask the local building or inspections department which categories it licenses, whether it examines, what bond and insurance limits it sets and when its board meets, because in Indiana all four answers change from one county line to the next.
- Indianapolis / Marion County (Department of Business and Neighborhood Services - General Contractor license)
- Fort Wayne / Allen County (Building Department - General Contractors and Building Contractors licenses, exam required)
- Evansville (Building Commission - Building General Contractor license, exam and four years' experience)
- South Bend / St. Joseph County (Building Department - Building Contractor registration, no exam)
- Hammond / Lake County (Inspections Department - Commercial General contractor license, exam required)
- Bloomington / Monroe County (Building Department - voluntary general contractor sign-up)
Common questions
- Do I have to take the Washington general contractor exam if I'm licensed in Indiana?
- No. The trade exam is waived on this path.
- What does it cost to get a Washington general contractor license from Indiana?
- Published fees on this path total $150.20, not counting exam vendor fees or bonds.
- Do my Indiana work hours count in Washington?
- No. Washington does not credit out-of-state hours on this path.
- How long does the application take?
- The board's published or typical processing time is about 28 days.
- Does it work the other way, from Washington to Indiana?
- Not necessarily. Reciprocity is directed. Going from Washington to Indiana, the mechanism is not applicable.
Sources
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- NASCLA Commercial Exam - Participating State Agencies · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- Washington Department of Revenue - Apply for a business license (UBI number) · Washington State Department of Revenue, Business Licensing Service · Agency Page · verified September 17, 2026
- L&I Form F625-001-000 - Application for Construction Contractor Registration (rev. 07-2026) · Washington State Department of Labor & Industries · Form · verified September 17, 2026
- L&I - Register as a Contractor · Washington State Department of Labor & Industries · Agency Page · verified September 17, 2026
- RCW 18.27.010 - Definitions (contractor, general contractor, specialty contractor) · RCW 18.27.010 · Washington State Legislature · Statute · verified September 17, 2026
- RCW 18.27.030 - Application for registration - Grounds for denial and suspension · RCW 18.27.030 · Washington State Legislature · Statute · verified September 17, 2026
- RCW 18.27.040 - Bond or other security required · RCW 18.27.040 · Washington State Legislature · Statute · verified September 17, 2026
- RCW 18.27.050 - Insurance or financial responsibility required · RCW 18.27.050 · Washington State Legislature · Statute · verified September 17, 2026
- RCW 18.27.060 - Certificate of registration - Issuance, duration, renewal - Suspension · RCW 18.27.060 · Washington State Legislature · Statute · verified September 17, 2026
- Chapter 18.27 RCW - Registration of Contractors (full chapter text) · Chapter 18.27 RCW · Washington State Legislature · Statute · verified September 17, 2026
- WAC 296-200A-016 - Definitions of the specialty contractor classifications for the purpose of contractor registration only · WAC 296-200A-016; WAC 296-200A-015 · Washington State Legislature · Admin Rule · verified September 17, 2026
- WAC 296-200A-025 - How does a contractor register, renew, reregister or reinstate its registration? · WAC 296-200A-025 · Washington State Legislature · Admin Rule · verified September 17, 2026
- WAC 296-200A-030 - How much are the surety bond or savings account amounts? · WAC 296-200A-030 · Washington State Legislature · Admin Rule · verified September 17, 2026
- WAC 296-200A-900 - What fees does the department charge contractors for issuance, renewal, reregistration, and reinstatement of certificates of registration? · WAC 296-200A-900 · Washington State Legislature · Admin Rule · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.