Kentucky to Alabama: general contractor license reciprocity
Kentucky does not issue a statewide general contractor license, so there is nothing to transfer. Here is Alabama's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Prime contractor license, including the NASCLA Accredited Examination route (states without a reciprocity agreement)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Alabama uses the NASCLA Accredited Examination for Commercial General Building Contractors as its own trade examination for the Building Construction (Commercial) classification: the Board's official PSI candidate bulletin states that for that examination PSI administers the NASCLA Accredited Examination, and prints the NASCLA content outline (115 questions, 330 minutes, 81 to pass, open book) as the Alabama commercial building trade exam. A contractor who already holds the NASCLA credential can release the transcript from NASCLA's National Examination Database instead of sitting the trade exam again; a contractor without it sits it through PSI like anyone else, and other classifications each have their own Alabama PSI trade exam. Nothing else is waived. Every applicant must pass the Alabama Business and Law examination, file the $300 prime application with a Qualifying Party Form, show a minimum net worth and working capital of $10,000 in an accountant-prepared financial statement, file proof of general liability insurance, register the entity with the Alabama Secretary of State, supply three commercial or industrial work references for each classification requested plus an organizational chart, and prove citizenship or lawful presence. The application must be complete and on file 30 days before one of the Board's quarterly meetings, and no one may book an examination until it is.
The trade examination is shown as waivable because Alabama's own commercial building trade exam is the NASCLA Accredited Examination; an applicant who has not passed it, or who wants a classification other than Building Construction (Commercial), still sits the relevant PSI trade examination, which is why it stays on the requirements list. Out-of-state experience is not converted into hours or years, because the Board sets no hour requirement; it counts through the work-experience section and the three reference forms, which the Board reviews to decide which classifications to grant. The Board does not publish a processing time or a bid-limit dollar table; ask the Board at (334) 272-5030. Licenses renew annually in a month set by the first letter of the company name, at $200 for a prime license and $100 for a subcontractor license, and a license left unrenewed for a year past its expiration date means a new application and retaking both the trade and business and law examinations. Amending a license to add a classification also requires that classification's trade examination.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must have passed a licensing exam in Kentucky that the destination considers comparable.The NASCLA Accredited Examination for Commercial General Building Contractors is the examination Alabama itself uses for the Building Construction (Commercial) classification: the Board's PSI candidate bulletin says that for the Building Construction Examination (Commercial), PSI administers the NASCLA Accredited Examination, and prints its content outline as the Alabama exam. Candidates who have already passed it can send their transcript from NASCLA's National Examination Database at https://ned.nascla.org rather than repeating the exam. It is an examination credential and not a license: it waives no fee, no financial statement, no insurance, no reference and never the Alabama Business and Law examination. Because the Board does not publish a NASCLA policy statement of its own, confirm with the Board at (334) 272-5030 that a transcript will be accepted for the classification you want before relying on it.
- Documented commercial or industrial work experience in each classification requested, evidenced by three completed projects and three reference forms. The Board sets no minimum number of years or hours.
What you'll do to get licensed in Alabama
- 1Law / code exam. Pass a law, rules, or code exam. Alabama Business and Law examination (formerly the General Contractor examination) through PSI: 50 questions, 120 minutes, 70% to pass, open book against the NASCLA Contractors Guide to Business Law and Project Management, Alabama General edition. It is required of all general contractors and the Board says it is never waived, including on reciprocity..
- 2Trade exam. Pass the destination's trade exam. One PSI trade examination for each classification requested. For Building Construction (Commercial), PSI administers the NASCLA Accredited Examination for Commercial General Building Contractors as the Alabama trade exam: 115 questions, 330 minutes, 81 to pass, open book. An applicant who has already passed the NASCLA Accredited Examination elsewhere can release the transcript from NASCLA's National Examination Database rather than sitting it again. Other classifications have their own Alabama PSI trade examinations, and a complete application must be on file before anyone may register to test..
- 3Exam fee. Pay the exam fee ($96). $96 for each PSI examination, rising to $106 for AL Building Construction (Commercial), AL Highways and Streets Contractor, AL Municipal and Utility Contractor and AL Heavy Railroad Construction. Paid to PSI when the examination is booked, after the Board determines eligibility..
- 4Application fee. Pay the application fee ($300). Prime contractor application fee of $300, paid by cashier's check or money order only; personal and company checks are returned and Alabama law does not allow refunds. A subcontractor application is $150. The fee gives the applicant one year from the date the Board receives it to complete the requirements..
- 5Financial responsibility. Show financial responsibility of at least $10,000. Minimum net worth and working capital of $10,000, shown in an audited, reviewed or compiled financial statement prepared under generally accepted accounting principles by a CPA or a licensed public accountant approved by the Board, dated no more than one year before submission. The Alabama Department of Transportation booklet is also accepted. Cash-basis and tax-basis statements are not accepted and deficits are not accepted. The figures submitted set the license's bid limit; a bank line of credit can raise working capital to the level of net worth, and a personal or parent-company statement plus the Board's Guaranty Agreement can raise the bid limit one step. The Board does not publish the dollar table that converts financial figures into bid limits..
- 6Insurance. Carry the required insurance. Proof of current general liability insurance filed with the application, in the exact name of the applicant, showing the Alabama Licensing Board for General Contractors at 445 Dexter Ave, Suite 3060, Montgomery, AL 36104 as certificate holder..
- 7Business license. Obtain a business license. The license is issued to a legal entity, so every entity, Alabama or out-of-state, must be registered with the Alabama Secretary of State before the license issues, and a dated print screen of the Entity Details record goes in the application. Individuals and general partnerships are exempt from this step. The state and county privilege license is a separate obligation from the Board's license..
- 8Other. Qualifying Party Form for each named qualifier, three work or job reference forms from three separate licensed general contractors, registered architects, registered professional engineers or Board-qualified persons covering commercial or industrial projects in each classification requested, a Principal Individual Questionnaire for anyone whose experience is being counted, an organizational chart for the applicant entity, a notarized affidavit, and proof of United States citizenship or lawful presence..
Published fees on this path total $396, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam
- Exam fee · $96
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Alabama licenses general contractors
Alabama general contractor · “General Contractor (Prime) license, by major classification such as Building Construction (BC)”
Statewide license
Issued by Alabama Licensing Board for General Contractors
Alabama licenses commercial and public general contracting statewide through the Alabama Licensing Board for General Contractors in Montgomery; residential homebuilding is licensed separately by the Home Builders Licensure Board. A license is required for any undertaking, including labor and materials, costing $100,000 or more, and for swimming pool construction of $5,000 or more; subcontractors working under a licensed prime at or above those figures must also be licensed, and an awarding authority must confirm licensure before accepting a bid. The license belongs to the business rather than the person: it is issued to an individual, partnership, corporation, LLC or LLP and is qualified by a named qualifying party on the Board's Qualifying Party Form, so an inbound contractor applies as or for the entity that will sign contracts. Licenses are granted by classification, with major classifications including Building Construction, Building Construction Under Four Stories, Highways and Streets, Municipal and Utility, Heavy and Railroad, Mechanical and Electrical, each with named subclassifications, and at least three completed projects must be documented for every classification requested. Every license also carries a bid limit set by the financial statement the applicant files rather than by skill. The Board names five states whose licensees may have the trade examination waived; the business law examination is never waived.
Why Kentucky has nothing to transfer
Kentucky general contractor · “General or commercial building contractor license or registration (city- or county-issued)”
Licensed by cities and counties
Issued by No state authority; cities and counties license or register commercial building contractors
Kentucky has no statewide general, commercial or unlimited building contractor license, so there is nothing at state level for an out-of-state general contractor's license to transfer into, no qualifying party to designate with the state and no NASCLA route to take. The Department of Housing, Buildings and Construction licenses the trades instead - its home page says it "licenses/certifies plumbers, electricians, boiler contractors, sprinkler and/or fire alarm contractors and building inspectors", and 815 KAR adds HVAC licensing, elevator safety, boilers and pressure vessels, manufactured homes and home inspectors, with no chapter for building contractors anywhere in the title. Commercial building is controlled through local permitting, and the requirements are administrative rather than technical. Louisville Metro issues a Building Type A - Commercial license for $125 a year on a liability certificate, a workers' compensation filing and a Jefferson County occupational license number, with no exam and no bond. Lexington-Fayette registers a general contractor who "performs commercial, industrial, public works, and/or residential construction of larger than four-family homes" under its Contractors Registration Ordinance, and unregistered contractors cannot obtain building permits there. Bowling Green and Warren County run a joint Contractors Licensing Board whose $250 General Contractors License covers construction management and permit pulling, while telling applicants plainly that the license does not warrant that they are qualified. Owensboro and Covington require only an occupational business license and insurance. A commercial builder arriving in Kentucky therefore registers jurisdiction by jurisdiction and makes sure the plumbing, electrical, HVAC, boiler and fire-protection scope is performed under the correct HBC state licenses.
How local licensing works in Kentucky
How local licensing works. Kentucky has no state general contractor board, no state business-and-law exam for builders and no statewide reciprocity for commercial construction. Every rule that binds a general contractor is either a trade license from the Department of Housing, Buildings and Construction, the Kentucky Building Code in 815 KAR Chapter 007, or a local ordinance. Find the building department with jurisdiction over the site first, then register there before bidding. A registration in one Kentucky jurisdiction is worth nothing in the next, and an out-of-state general contractor license is worth nothing in any of them.
Louisville Metro (Jefferson County). The Office of Construction Review licenses building contractors for the merged city-county. License A covers "one or more permitted projects during a calendar year" and License B a single permitted project; the work scopes are Building A-Residential, Building A-Residential/Commercial, Building A-Commercial and Building B. Building Type A is "for building contractors seeking to obtain multiple permits within Louisville Jefferson County" at $125 a year on a term running 1 January to 31 December; Building Type B is $50 and is limited to one permit per person or company per renewal year. The filing is a certificate of liability insurance with the Office of Construction Review as certificate holder, workers' compensation and unemployment insurance or a notarized affidavit where the contractor has no covered employees, an Occupational License Number from the Revenue Commission of Jefferson County, and the application through the Metro business portal. The six-hour continuing education requirement attaches to the scopes that include housing - Building A-R, Building A-RC and Building B - so a contractor registered purely as Building A-Commercial is the one building class without it. Renewals must include a subcontractor list. There is no exam, experience review, bond or financial statement on any building class. 444 S. 5th St., Suite 100, (502) 574-3321.
Lexington-Fayette Urban County. The Division of Building Inspection registers every contractor under the Contractors Registration Ordinance, and "unregistered contractors cannot obtain building permits." The commercial class, under Ordinance 5-90(a)(1), is the general contractor, who "performs commercial, industrial, public works, and/or residential construction of larger than four-family homes (4-plex); and may supervise, arrange, and/or perform wholly or partly more than two building trades or crafts." A firm that concentrates on one or two trades registers as a specialty contractor instead. The filing is a Home Office Certificate ($10) or Certificate of Occupancy ($25) where the business address is in Fayette County, an occupational business license from Revenue, general liability and workers' compensation insurance with LFUCG named as certificate holder, and the online Contractor Registration Application with those two documents uploaded. No exam, experience or bond is required. The published Building Inspection fee schedule covers permits and lists no contractor registration fee, so confirm the amount with the division. 101 E. Vine St., (859) 258-3770.
Bowling Green and Warren County. One joint Contractors Licensing Board serves the city and the county under Ordinance 91-58 WC and Ordinance 91-25 BG. The General Contractors License, $250 and non-refundable, is required of anyone "doing any type of general contract work in Bowling Green / Warren County including pulling permits for building or remodeling, construction management, or if you would have two or more subcontractors per job." The Specialty Contractors License is $100 and covers subcontract work or a job with at most one subcontractor. Insurance is the substantive test: a certificate naming the board as certificate holder with general liability of at least $100,000 per occurrence, workers' compensation shown on the certificate or a notarized Affidavit of Exemption, and a notarized Partnership Agreement for partnerships. Licenses are non-transferable, renewals are annual and pro-rated mid-year, and a change of ownership voids the license. There is no exam or experience requirement; the board states that it "does not warrant that you are otherwise qualified to perform your trade or specialty by the issuance of its license." A city occupational license is needed for work inside Bowling Green and a county one for work outside it. 1141 State Street, Suite 200, 270-781-3530.
Owensboro and Daviess County. There is no contractor license here. The Owensboro Metropolitan Planning Commission's Building & Electrical Division issues building, electrical, HVAC, sign and parking lot permits and certificates of occupancy for Owensboro-Daviess County under the Kentucky Building Code and the National Electrical Code, and issues no contractor credential; demolition permits come from City of Owensboro Public Works. A commercial builder registers with the city's Occupational License Division before doing business inside the city limits, with a minimum license fee of $75 at registration. 101 East 4th Street, 270-687-5600.
Covington and Kenton County (Northern Kentucky). Planning and Development Services of Kenton County is the building department, and it requires that "all contractors must obtain and maintain a Kenton County occupational license and provide proof of Kentucky workers' compensation insurance coverage", plus the HBC state license "for electrical, HVAC, plumbing, and fire suppression work", with copies of all of it on file "before any permits can be issued." There is no general contractor license, exam or bond. In Covington a zoning permit precedes the building permit, and a certificate of appropriateness is needed first inside a historic preservation overlay. PDS, 1840 Simon Kenton Way, Suite 3400, Covington, 859-331-8980.
What does and does not travel. An out-of-state general contractor license, a NASCLA Accredited Examination and out-of-state project experience carry no weight in any Kentucky jurisdiction, because none of them tests or qualifies commercial builders. Kentucky is not a NASCLA participating state, and no Kentucky city on this page accepts an examination in place of its own filing. What does matter is holding, or employing someone who holds, the Department of Housing, Buildings and Construction license for each state-licensed trade in scope - plumbing, electrical, HVAC, boilers, fire sprinklers and fire alarms - because those licenses are statewide, are the only Kentucky construction credentials with reciprocity rules of their own, and are separately demanded by several of the local building departments above.
- Louisville Metro / Jefferson County (Office of Construction Review - Building A-Commercial licenses)
- Lexington-Fayette Urban County (Division of Building Inspection - general contractor registration under Ord. 5-90(a))
- Bowling Green and Warren County (joint Contractors Licensing Board - $250 General Contractors License)
- Owensboro and Daviess County (Owensboro Metropolitan Planning Commission - permits only; city occupational license)
- Covington and Kenton County (Planning and Development Services of Kenton County - occupational license and insurance only)
Common questions
- Do I have to take the Alabama general contractor exam if I'm licensed in Kentucky?
- The trade exam is waived, but Alabama requires a law or code exam.
- What does it cost to get a Alabama general contractor license from Kentucky?
- Published fees on this path total $396, not counting exam vendor fees or bonds.
- Do my Kentucky work hours count in Alabama?
- Yes. Documented out-of-state experience counts toward Alabama's eligibility requirements.
- Does it work the other way, from Alabama to Kentucky?
- Not necessarily. Reciprocity is directed. Going from Alabama to Kentucky, the mechanism is not applicable.
Sources
- Alabama Licensing Board for General Contractors - How to Apply for a License (fees, reciprocity, references) · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
- Alabama Licensing Board for General Contractors - Contractor Licensing Law (definition and thresholds) · Ala. Code §§ 34-8-1, 34-8-2, 34-8-7, 34-8-8, 34-8-9 · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
- Prime Contractor Application and Instructions - Alabama Licensing Board for General Contractors (rev. 02/2022) · Ala. Admin. Code r. 230-X-1-.33; Ala. Code § 34-8-2(b) · Alabama Licensing Board for General Contractors · Form · verified September 17, 2026
- State of Alabama General Contractors - Candidate Information Bulletin (PSI, updated 1/23/26) · PSI Services LLC for the Alabama Licensing Board for General Contractors · Other · verified September 17, 2026
- Alabama Licensing Board for General Contractors - Reciprocity (reciprocal states and exam waiver) · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
- Alabama Licensing Board for General Contractors - Renewal Information (staggered renewal months and fees) · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
- Alabama Licensing Board for General Contractors - Testing (PSI bulletin and trade exam requirement) · Ala. Admin. Code r. 230-X-1-.27, 230-X-1-.34 · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.