Kentucky to Georgia: general contractor license reciprocity
Kentucky does not issue a statewide general contractor license, so there is nothing to transfer. Here is Georgia's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Licensure using the NASCLA Accredited Examination (any state, no agreement needed)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Georgia's own trade examination for the General Contractor and General Contractor Limited Tier licenses is the NASCLA Accredited Examination for Commercial General Building Contractors, so a contractor arriving from any state who has already passed it does not sit a separate Georgia trade examination. You release your NASCLA transcript to the Board with the application and, once the Board approves you, take the Georgia Business and Law examination through PSI; that examination is never waived. If you have not taken the NASCLA examination, it is the examination you will be approved to sit, and it is available to candidates in any participating state. Everything outside the trade examination still has to be met on its own: the Board's experience routes, a minimum net worth of $150,000 for the standard tier or $25,000 for the Limited Tier, $500,000 per occurrence of general liability insurance, workers compensation once the business has three or more employees in Georgia, and Georgia Corporations Division registration if the license will be held by a company. Out-of-state experience counts toward eligibility; the Board does not require the work or the supporting commercial project to have been performed in Georgia.
This is the NASCLA pathway, and in Georgia it is the ordinary pathway rather than an alternative one: the Board's licensure comparison chart lists the NASCLA Accredited Examination and the Georgia Business and Law examination as the examination requirements for both general tiers, and every General Contractor application checklist asks for NASCLA transcripts. The Board accepts NASCLA in the General Contractor Division only; the residential classifications have their own Georgia examinations. Applications are filed in the GOALS portal and generally processed within 20 business days, with a deficiency letter restarting the count and a 60-day cure window. Exam approval letters are valid for one year and allow three sittings; the old examination-exemption or grandfathering route has closed. General contractor licenses renew by 30 June of even-numbered years and carry no continuing education requirement.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
- Typical processing
- About 20 days
What you must already have
- You must have passed a licensing exam in Kentucky that the destination considers comparable.The Board's licensure comparison chart names the NASCLA Accredited Examination for Commercial General Building Contractors as the examination requirement for both the General Contractor and the General Contractor Limited Tier license, alongside the Georgia Business and Law examination. A NASCLA certificate earned while licensed in another participating state therefore satisfies Georgia's trade examination outright; you release the NASCLA transcript to the Board with the application. The NASCLA examination is origin-independent and is not a reciprocal agreement with any state, and it does not waive the Georgia Business and Law examination or any application, experience, net worth or insurance requirement.
- At least 21 years old.
- One of the Board's three experience routes: a four-year degree in engineering, architecture, construction management, building construction or a related field acceptable to the Division, plus one year working as or for a general contractor; accredited college coursework plus practical experience totaling four years; or at least four years of active construction experience, of which two were as or for a general contractor and one in estimating, engineering, supervision or project management.
- At least one commercial project, within five years of the application, on which you had general oversight and primary management responsibility as supervisor for its successful performance and completion. The Board does not require the project to have been in Georgia.
What you'll do to get licensed in Georgia
- 1Law / code exam. Pass a law, rules, or code exam. Georgia Business and Law examination, taken through PSI after the Board approves the application. It is required of every general contractor applicant, including NASCLA holders and reciprocity applicants, and is never waived..
- 2Trade exam. Pass the destination's trade exam (if applicable). NASCLA Accredited Examination for Commercial General Building Contractors. Shown as optional because applicants who already hold it simply release the transcript to the Board; applicants who do not will be approved to sit it, and it is administered by NASCLA rather than by Georgia, so it can be taken in any participating state before or after applying here..
- 3Application fee. Pay the application fee. A non-refundable application fee is due with the online application. The Board does not print the amount on its how-to guides; the current amount is on the fee schedule in the GOALS portal at https://goals.sos.ga.gov/, and the Board can be reached at (404) 424-9966..
- 4Exam fee. Pay the exam fee. Examination fees paid to the testing organization when each examination is scheduled: PSI for the Georgia Business and Law examination and NASCLA for the accredited examination and its transcript. The Board does not publish either fee..
- 5Financial responsibility. Show financial responsibility of at least $150,000. An affirmed minimum net worth of $150,000 for a General Contractor license, or $25,000 for the General Contractor Limited Tier, supported by the net worth affirmation or financial documents the application asks for. If you are applying as a qualifying agent the net worth must be the business organization's, not yours. Unlike the residential division, the general division does not offer a surety bond, line of credit or letter of credit as a substitute for the net worth affirmation..
- 6Insurance. Carry the required insurance ($500,000). General liability insurance of at least $500,000 per occurrence for both general tiers, evidenced by a signed current certificate of insurance naming the State Licensing Board for Residential and General Contractors, 237 Coliseum Drive, Macon, GA 31217 as certificate holder. Binders, information pages, policies and declaration pages are not accepted. An individual applicant must be the named insured; a qualifying agent's coverage must be in the company's name. Workers compensation insurance is required once the business has three or more employees in Georgia..
- 7Business license. Obtain a business license. If the license will be held by a company rather than by you personally, that business organization must be registered with the Georgia Corporations Division and, if formed outside Georgia, hold a Certificate of Authority to transact business here; you then apply as its qualifying agent. An individual license does not let you perform work on behalf of any LLC or corporation, even one you own outright..
- 8Contractor license. Hold or obtain a contractor license (if applicable). A general contractor license does not authorize electrical, plumbing, conditioned air, low voltage or utility work. Under O.C.G.A. 43-41-2(5) that work must be performed by someone licensed for it under Title 43 Chapter 14, whether a subcontractor or a separately licensed member of your own organization..
- 9Other. Supporting documents filed with the application: the work experience record and employment affidavit, a project reference affidavit for the qualifying commercial project, an official college transcript, diploma or certificate where you are qualifying on education, a Secure and Verifiable Document such as a driver license or passport with an affidavit of lawful presence under O.C.G.A. 50-36-1, a list of affiliations, bankruptcy documents if applicable, and disclosure of any disciplinary action or sanctions with supporting court documents and a letter of explanation..
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam · if applicable
- Exam fee
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · $500,000
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Georgia licenses general contractors
Georgia general contractor · “General Contractor (also General Contractor Limited Tier, capped at $1,000,000 per contract)”
Statewide license
Georgia licenses commercial general contractors statewide through the General Contractor Division of the State Licensing Board for Residential and General Contractors, part of the Secretary of State's Professional Licensing Boards Division. A General Contractor license is unlimited as to the type of work and carries no financial limit on any project; the General Contractor Limited Tier is the same license capped at contracts of no more than $1,000,000. Neither license covers electrical, plumbing, conditioned air, low voltage or utility work, which must be performed by contractors licensed under O.C.G.A. Title 43 Chapter 14. As in the residential division the credential is usually entity-held: an individual license only covers work in your own name or as a sole proprietorship, and to contract through a company you apply as its qualifying agent, the person with final approval authority over its construction work, contracts and related financial affairs, with the financial and insurance proofs in the company's name. What makes Georgia unusual for an inbound contractor is the examination: the Board's own trade examination for both general tiers is the NASCLA Accredited Examination for Commercial General Building Contractors, so a NASCLA certificate earned in another state already satisfies it. The Georgia Business and Law examination is always separate and is never waived, including for reciprocity applicants.
Why Kentucky has nothing to transfer
Kentucky general contractor · “General or commercial building contractor license or registration (city- or county-issued)”
Licensed by cities and counties
Issued by No state authority; cities and counties license or register commercial building contractors
Kentucky has no statewide general, commercial or unlimited building contractor license, so there is nothing at state level for an out-of-state general contractor's license to transfer into, no qualifying party to designate with the state and no NASCLA route to take. The Department of Housing, Buildings and Construction licenses the trades instead - its home page says it "licenses/certifies plumbers, electricians, boiler contractors, sprinkler and/or fire alarm contractors and building inspectors", and 815 KAR adds HVAC licensing, elevator safety, boilers and pressure vessels, manufactured homes and home inspectors, with no chapter for building contractors anywhere in the title. Commercial building is controlled through local permitting, and the requirements are administrative rather than technical. Louisville Metro issues a Building Type A - Commercial license for $125 a year on a liability certificate, a workers' compensation filing and a Jefferson County occupational license number, with no exam and no bond. Lexington-Fayette registers a general contractor who "performs commercial, industrial, public works, and/or residential construction of larger than four-family homes" under its Contractors Registration Ordinance, and unregistered contractors cannot obtain building permits there. Bowling Green and Warren County run a joint Contractors Licensing Board whose $250 General Contractors License covers construction management and permit pulling, while telling applicants plainly that the license does not warrant that they are qualified. Owensboro and Covington require only an occupational business license and insurance. A commercial builder arriving in Kentucky therefore registers jurisdiction by jurisdiction and makes sure the plumbing, electrical, HVAC, boiler and fire-protection scope is performed under the correct HBC state licenses.
How local licensing works in Kentucky
How local licensing works. Kentucky has no state general contractor board, no state business-and-law exam for builders and no statewide reciprocity for commercial construction. Every rule that binds a general contractor is either a trade license from the Department of Housing, Buildings and Construction, the Kentucky Building Code in 815 KAR Chapter 007, or a local ordinance. Find the building department with jurisdiction over the site first, then register there before bidding. A registration in one Kentucky jurisdiction is worth nothing in the next, and an out-of-state general contractor license is worth nothing in any of them.
Louisville Metro (Jefferson County). The Office of Construction Review licenses building contractors for the merged city-county. License A covers "one or more permitted projects during a calendar year" and License B a single permitted project; the work scopes are Building A-Residential, Building A-Residential/Commercial, Building A-Commercial and Building B. Building Type A is "for building contractors seeking to obtain multiple permits within Louisville Jefferson County" at $125 a year on a term running 1 January to 31 December; Building Type B is $50 and is limited to one permit per person or company per renewal year. The filing is a certificate of liability insurance with the Office of Construction Review as certificate holder, workers' compensation and unemployment insurance or a notarized affidavit where the contractor has no covered employees, an Occupational License Number from the Revenue Commission of Jefferson County, and the application through the Metro business portal. The six-hour continuing education requirement attaches to the scopes that include housing - Building A-R, Building A-RC and Building B - so a contractor registered purely as Building A-Commercial is the one building class without it. Renewals must include a subcontractor list. There is no exam, experience review, bond or financial statement on any building class. 444 S. 5th St., Suite 100, (502) 574-3321.
Lexington-Fayette Urban County. The Division of Building Inspection registers every contractor under the Contractors Registration Ordinance, and "unregistered contractors cannot obtain building permits." The commercial class, under Ordinance 5-90(a)(1), is the general contractor, who "performs commercial, industrial, public works, and/or residential construction of larger than four-family homes (4-plex); and may supervise, arrange, and/or perform wholly or partly more than two building trades or crafts." A firm that concentrates on one or two trades registers as a specialty contractor instead. The filing is a Home Office Certificate ($10) or Certificate of Occupancy ($25) where the business address is in Fayette County, an occupational business license from Revenue, general liability and workers' compensation insurance with LFUCG named as certificate holder, and the online Contractor Registration Application with those two documents uploaded. No exam, experience or bond is required. The published Building Inspection fee schedule covers permits and lists no contractor registration fee, so confirm the amount with the division. 101 E. Vine St., (859) 258-3770.
Bowling Green and Warren County. One joint Contractors Licensing Board serves the city and the county under Ordinance 91-58 WC and Ordinance 91-25 BG. The General Contractors License, $250 and non-refundable, is required of anyone "doing any type of general contract work in Bowling Green / Warren County including pulling permits for building or remodeling, construction management, or if you would have two or more subcontractors per job." The Specialty Contractors License is $100 and covers subcontract work or a job with at most one subcontractor. Insurance is the substantive test: a certificate naming the board as certificate holder with general liability of at least $100,000 per occurrence, workers' compensation shown on the certificate or a notarized Affidavit of Exemption, and a notarized Partnership Agreement for partnerships. Licenses are non-transferable, renewals are annual and pro-rated mid-year, and a change of ownership voids the license. There is no exam or experience requirement; the board states that it "does not warrant that you are otherwise qualified to perform your trade or specialty by the issuance of its license." A city occupational license is needed for work inside Bowling Green and a county one for work outside it. 1141 State Street, Suite 200, 270-781-3530.
Owensboro and Daviess County. There is no contractor license here. The Owensboro Metropolitan Planning Commission's Building & Electrical Division issues building, electrical, HVAC, sign and parking lot permits and certificates of occupancy for Owensboro-Daviess County under the Kentucky Building Code and the National Electrical Code, and issues no contractor credential; demolition permits come from City of Owensboro Public Works. A commercial builder registers with the city's Occupational License Division before doing business inside the city limits, with a minimum license fee of $75 at registration. 101 East 4th Street, 270-687-5600.
Covington and Kenton County (Northern Kentucky). Planning and Development Services of Kenton County is the building department, and it requires that "all contractors must obtain and maintain a Kenton County occupational license and provide proof of Kentucky workers' compensation insurance coverage", plus the HBC state license "for electrical, HVAC, plumbing, and fire suppression work", with copies of all of it on file "before any permits can be issued." There is no general contractor license, exam or bond. In Covington a zoning permit precedes the building permit, and a certificate of appropriateness is needed first inside a historic preservation overlay. PDS, 1840 Simon Kenton Way, Suite 3400, Covington, 859-331-8980.
What does and does not travel. An out-of-state general contractor license, a NASCLA Accredited Examination and out-of-state project experience carry no weight in any Kentucky jurisdiction, because none of them tests or qualifies commercial builders. Kentucky is not a NASCLA participating state, and no Kentucky city on this page accepts an examination in place of its own filing. What does matter is holding, or employing someone who holds, the Department of Housing, Buildings and Construction license for each state-licensed trade in scope - plumbing, electrical, HVAC, boilers, fire sprinklers and fire alarms - because those licenses are statewide, are the only Kentucky construction credentials with reciprocity rules of their own, and are separately demanded by several of the local building departments above.
- Louisville Metro / Jefferson County (Office of Construction Review - Building A-Commercial licenses)
- Lexington-Fayette Urban County (Division of Building Inspection - general contractor registration under Ord. 5-90(a))
- Bowling Green and Warren County (joint Contractors Licensing Board - $250 General Contractors License)
- Owensboro and Daviess County (Owensboro Metropolitan Planning Commission - permits only; city occupational license)
- Covington and Kenton County (Planning and Development Services of Kenton County - occupational license and insurance only)
Common questions
- Do I have to take the Georgia general contractor exam if I'm licensed in Kentucky?
- The trade exam is waived, but Georgia requires a law or code exam.
- Do my Kentucky work hours count in Georgia?
- Yes. Documented out-of-state experience counts toward Georgia's eligibility requirements.
- How long does the application take?
- The board's published or typical processing time is about 20 days.
- Does it work the other way, from Georgia to Kentucky?
- Not necessarily. Reciprocity is directed. Going from Georgia to Kentucky, the mechanism is not applicable.
Sources
- O.C.G.A. Title 43, Chapter 41 - Residential and General Contractors (Board law as published by the Board) · O.C.G.A. 43-41-2, 43-41-5(b), 43-41-6, 43-41-7(2), 43-41-8(a)(3), 43-41-9, 43-41-17 · Georgia Secretary of State, State Licensing Board for Residential and General Contractors · Statute · verified September 17, 2026
- Ga. Comp. R. & Regs. Chapter 553-4 - Qualifications for Licensure, General Contractor Division · Ga. Comp. R. & Regs. 553-4-.01 through 553-4-.07 · Georgia Secretary of State, Rules and Regulations of the State of Georgia · Admin Rule · verified September 17, 2026
- State Licensing Board for Residential and Commercial General Contractors · Georgia Secretary of State, Professional Licensing Boards Division · Agency Page · verified September 17, 2026
- Licensure Comparison Chart - State Licensing Board for Residential and General Contractors (Revised 02/25) · O.C.G.A. 43-41-2(5), (9), (10), (11); 43-41-17 · Georgia Secretary of State, State Licensing Board for Residential and General Contractors · Other · verified September 17, 2026
- Residential and Commercial General Contractors - Frequently Asked Questions · Georgia Secretary of State, Professional Licensing Boards Division · Faq · verified September 17, 2026
- General Contractors: How to Guide (all General Contractor application types) · Georgia Secretary of State, Professional Licensing Boards Division · Agency Page · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.