Michigan to California: general contractor license reciprocity
Michigan does not issue a statewide general contractor license, so there is nothing to transfer. Here is California's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
NASCLA Commercial General Builders examination waiver, accepted from any state for the General Building classification
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
CSLB waives the General Building trade examination for a contractor who has passed the NASCLA Accredited Examination for Commercial General Building Contractors, whatever state they are licensed in. CSLB limits this route to its General Building classification and also requires that you have held a general building contractor license, or a similar title, in good standing for the previous five years. You file the Application for Original Contractor's License with the $450 processing fee, enclose a signed and dated statement asking for the NASCLA Commercial General Builders examination waiver, have your current licensing agency complete CSLB's License Verification Request and return it to you sealed, and use your NASCLA account to ask that your examination results be shared with California. The Law and Business examination is never waived, and the four years of experience, the Certification of Work Experience, fingerprinting, the $25,000 contractor bond, workers' compensation or an exemption and all fees apply in full. An applicant who does not hold the NASCLA credential and is not covered by one of the five named-state agreements sits both examinations through PSI, but documented out-of-state work still counts toward the experience requirement.
The NASCLA examination is an examination credential, not a license and not an agreement between two states: anyone may sit it in any participating jurisdiction, which is why it is published here rather than as a state-by-state rule. CSLB's Reciprocity Requirements page states the acceptance in its own words, so it does not rest on NASCLA's list alone. CSLB names no other national examination and sets no net worth, working capital or financial statement requirement: the financial solvency section of the Contractors State License Law, Business and Professions Code section 7067.5, was repealed effective January 1, 2016 and the $25,000 contractor bond stands in its place. CSLB publishes no end-to-end processing time, only the date each unit is currently working on, updated weekly on its Processing Times page. Licensing Information Center: (800) 321-CSLB (2752).
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must have passed a licensing exam in Michigan that the destination considers comparable.CSLB's Reciprocity Requirements page sets out this route under the heading "Contractors, Regardless of State, Who Have Passed the NASCLA Commercial General Builders Examination" and limits it to applicants applying for the CSLB General Building classification. The waiver does not extend to B-2 Residential Remodeling, to Class A General Engineering or to any C-series specialty classification. It does not waive the Law and Business examination, the experience requirement, the bond, the insurance requirements or any fee. Results reach CSLB through your NASCLA account, which you use to ask that they be shared with California.
- You must have held your Michigan license for at least 5 years.
- Your Michigan license must be active and in good standing.
- You must document at least 4 years of qualifying work experience.The experience section of the application must be completed even where the trade examination is waived. Technical training, apprenticeship training or education can be credited in place of part of the four years, but at least one year must be practical experience and the training must be documented. Business and Professions Code section 7068(h) requires the registrar to review experience gained in other states and confirm it was gained lawfully there. For the B classification CSLB expects proof of building and rebuilding work on a daily basis rather than occasional repairs.
- The qualifying individual is at least 18 years old and has a Social Security number or an Individual Taxpayer Identification Number. A qualifying individual may not hold another active contractor's license while acting as qualifier, except as allowed by Business and Professions Code section 7068.1.
What you'll do to get licensed in California
- 1Application fee. Pay the application fee ($450). Non-refundable original application fee of $450, covering one classification, payable with the Application for Original Contractor's License whether the application is by examination or by waiver. Adding a second classification on the same original application costs $150..
- 2License fee. Pay the license or certificate fee ($200). Initial license fee of $200 for a sole owner, or $350 for a non-sole owner, paid after the examination requirements are met and the remaining issuance documents are filed. It buys a two-year license. CSLB's own worked total for one classification is $650 for a sole owner and $800 for a non-sole owner, application fee included..
- 3Law / code exam. Pass a law, rules, or code exam. CSLB Law and Business examination, administered by PSI Exams. Every original applicant takes it, including anyone holding the NASCLA credential or applying under a named-state agreement..
- 4Trade exam. Pass the destination's trade exam (if applicable). B General Building trade examination, administered by PSI Exams. It is waived for a qualifying NASCLA holder, but CSLB retains the right to require the trade examination in any case where a waiver is granted. Where it is required, you have 18 months after CSLB accepts the application to pass both examinations; passing scores stay good for five years..
- 5Exam fee. Pay the exam fee. Rescheduling and re-examination fees are paid directly to PSI each time. CSLB does not publish the amounts on its fee list; they are in the Candidate Information Bulletin PSI sends with the Notice to Schedule an Examination, or ask CSLB on (800) 321-CSLB (2752). NASCLA sets its own fees for its examination and for sharing results..
- 6Background check. Complete a background check. Mandatory criminal background check by Live Scan fingerprinting after CSLB accepts the application. Paid to the Live Scan operator: $32 to the Department of Justice and $17 to the Federal Bureau of Investigation, plus a rolling fee that each site sets for itself and CSLB does not set..
- 7Surety bond. Post a surety bond ($25,000). Contractor's bond of $25,000, required by Business and Professions Code section 7071.6 before CSLB can issue an active license. It must be written by a surety licensed through the California Department of Insurance on a form approved by the Attorney General's Office, must name the business exactly as CSLB records it, and must reach CSLB headquarters within 90 days of its effective date. A cashier's check may be filed instead..
- 8Surety bond. Post a surety bond ($25,000) (if applicable). Bond of Qualifying Individual, $25,000, required by Business and Professions Code section 7071.9 when the license is qualified by a responsible managing employee, or by a responsible managing officer who owns less than 10 percent of the corporation's voting stock. An RMO who owns 10 percent or more files a Bond of Qualifying Individual Exemption Certification instead. Each RME or RMO on a license must comply separately..
- 9Surety bond. Post a surety bond ($100,000) (if applicable). LLC employee/worker bond of $100,000, required by Business and Professions Code section 7071.6.5 only where the license is held by a limited liability company. It is in addition to the $25,000 contractor bond and protects employees against unpaid wages, interest on wages, fringe benefits and other contributions..
- 10Insurance. Carry the required insurance ($1,000,000) (if applicable). Liability insurance of at least $1,000,000 cumulative, required by Business and Professions Code section 7071.19 only where the license is held by a limited liability company with five or fewer people listed as personnel of record. Each additional member of the personnel of record adds $100,000, capped at $5,000,000. The policy must be written by an insurer licensed in California or an eligible surplus line insurer..
- 11Insurance. Carry the required insurance. Workers' compensation insurance, or a certificate of self-insurance from the Department of Industrial Relations, before CSLB will issue or activate the license if the business has employees. A business with no employees files an exemption instead, but CSLB will not accept an exemption where the license is qualified by a responsible managing employee, because an RME is an employee..
- 12Business license. Obtain a business license. The CSLB license is issued to a business entity: sole owner, partnership, corporation, limited liability company or joint venture. Form or register the entity first, since every officer, member, responsible manager or director must be listed as personnel of record. Cities and counties also require their own business tax registration or business license wherever you work, separately from the CSLB license..
- 13Other. Certification of Work Experience form for each period of experience claimed, completed by someone with firsthand knowledge of the work, plus the signed and dated statement requesting the NASCLA Commercial General Builders examination waiver and the sealed License Verification Request from your current licensing agency..
Published fees on this path total $650, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam · if applicable
- Exam fee
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $25,000
- Surety bond · $25,000 · if applicable
- Surety bond · $100,000 · if applicable
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · $1,000,000 · if applicable
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How California licenses general contractors
California general contractor · “B - General Building Contractor (Class A General Engineering is the separate fixed-works license)”
Statewide license
Issued by Contractors State License Board
California's unlimited building credential is the Class B General Building Contractor license from the Contractors State License Board (CSLB), and there is no dollar limit or tier system above it. Under Business and Professions Code section 7057 a general building contractor's principal business is structures requiring at least two unrelated building trades or crafts; a B contractor may not take a prime contract on a project involving other trades unless the contract needs at least two unrelated trades besides framing and carpentry, or it holds the relevant specialty classification, or it subcontracts to a licensed specialty contractor, and fire protection (C-16) and well drilling (C-57) always need the specialty license or a subcontractor. Class A General Engineering is a parallel classification rather than a grade above B: it covers fixed works requiring specialized engineering knowledge such as highways, bridges, tunnels, dams, pipelines, sewers, grading and earthmoving, and a contractor who does both kinds of work holds both classifications. Below B sits B-2 Residential Remodeling, limited to existing residential wood frame structures and contracts using three unrelated trades. CSLB issues the license to a business entity and the person who meets the experience and examination requirements is named on it as the qualifying individual, a responsible managing employee (RME) or responsible managing officer (RMO), so an out-of-state general contractor moving to California applies as that qualifier. A license from another state cannot be used here even as a subcontractor or for a single project, and cities and counties additionally require a local business tax registration that does not replace the state license.
Why Michigan has nothing to transfer
Michigan general contractor
No individual license at this level
Issued by No state authority; Michigan licenses residential builders and the skilled trades only
Michigan does not license general, commercial or unlimited building contractors. LARA's Bureau of Construction Codes reviews applications "for Boiler, Electrical, Elevator, Mechanical, Plumbing, Inspector/Plan Reviewer, Residential Builder" and nothing else, and the statute behind the builder license, Article 24 of the Occupational Code, reaches only a "residential structure" — a detached one- or two-family dwelling or a townhouse of not more than three stories. Apartment buildings, offices, retail, industrial and institutional projects fall outside it, so there is no Michigan license for an out-of-state general contractor license to transfer into, no qualifying party to register with a board, no state trade or business-and-law examination, and no NASCLA route: Michigan is not one of the agencies that accept the NASCLA Accredited Examination, and LARA's pages never mention it. What controls commercial work instead is the building permit. Local building departments enforce the state construction code and generally ask a commercial contractor to register with the city and to file plans sealed by a licensed architect or engineer, rather than to prove competency — Detroit's building department states plainly that "commercial construction does not require a licensed contractor to perform the work." Two things still bind statewide: anyone self-performing electrical, mechanical, plumbing, boiler or elevator work needs the matching LARA license for that trade whatever the building is, and any work on a one- or two-family dwelling or a qualifying townhouse needs the residential builder or M&A license, with unlicensed residential work drawing a civil fine of $100 to $500.
How local licensing works in Michigan
There is no local general contractor license in Michigan either. No Michigan city issues a general building or commercial contractor license won by examination. What cities operate is permit-time registration: they confirm who is responsible for the work, that the state licenses a trade contractor holds are current, and that tax and insurance details are on file. A registration in one Michigan city does not carry to the next, and none of them gives any weight to a contractor license held in another state. Find the building department with jurisdiction over the address first — in much of Michigan that is a township or county rather than a city — and ask what it registers before you bid.
Detroit. The Buildings, Safety Engineering and Environmental Department "requires contractors performing certain construction and maintenance work on buildings and lands within its borders to be licensed and registered," renewed annually, and contractors must connect their license account to their permit account in the city's Accela portal. The trades for which the Buildings Division runs its own qualifying examinations are awning erector; boiler and refrigeration; electrical journeyperson, master electrician and contractor; elevator operator, journeyman and contractor; sign erector; steeplejack; welder; window washer; and wrecking and demolition. There is no general or commercial building contractor examination on that list, and the department's own FAQ says that "commercial construction does not require a licensed contractor to perform the work (plans and drawings are required and must be sealed by a license engineer or architect)," while a contractor is needed to pull permits for commercial property or dwellings of two families and up. Residential work by a contractor needs "a State of Michigan Builder's License that is registered with the City of Detroit." Commercial plan review is quoted at up to 20 business days. Construction Division, (313) 224-3202.
Grand Rapids. The Development Center's rule is short: "if you have a State of Michigan license and want to apply for permits in Grand Rapids, you'll need to register it with the City," and the registration card follows by mail within about two weeks. The only credential the city issues itself is a boiler license. Commercial building projects "always require either an architect or engineer," and the city publishes a public directory of registered contractors. Development Center, 1120 Monroe Ave NW, 3rd Floor.
What actually travels. Nothing on the general side, because nothing is tested. The credentials worth carrying into Michigan are the trade licenses: an electrical, mechanical, plumbing, boiler or elevator license from LARA for self-performed work of that kind, and the residential builder or M&A license if any part of the business touches one- and two-family housing. Those pages on this site cover how each is obtained, and the answer for all of them is the same as here — Michigan has no reciprocity with any state.
Common questions
- Do I have to take the California general contractor exam if I'm licensed in Michigan?
- The trade exam is waived, but California requires a law or code exam.
- How long do I need to have held my Michigan license?
- At least 5 years before applying.
- What does it cost to get a California general contractor license from Michigan?
- Published fees on this path total $650, not counting exam vendor fees or bonds.
- Do my Michigan work hours count in California?
- Yes. Documented out-of-state experience counts toward California's eligibility requirements.
- Does it work the other way, from California to Michigan?
- Not necessarily. Reciprocity is directed. Going from California to Michigan, the mechanism is not applicable.
Sources
- California Business and Professions Code Sec. 7068 - Qualification of applicants; responsible managing employee; out-of-state experience · Cal. Bus. & Prof. Code Sec. 7068 · California Legislative Information (Office of Legislative Counsel) · Statute · verified September 17, 2026
- CSLB - Bond Requirements · Cal. Bus. & Prof. Code Sec. 7071.6, 7071.8, 7071.9 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - A General Engineering Contractor classification · Cal. Bus. & Prof. Code Sec. 7056 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - B General Building Contractor classification · Cal. Bus. & Prof. Code Sec. 7057 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - B-2 Residential Remodeling Contractor classification · Cal. Bus. & Prof. Code Sec. 7057.5 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - List of All CSLB Fees · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - Get Licensed to Build: A Guide to Becoming a Licensed Contractor (May 2025) · Contractors State License Board · Other · verified September 17, 2026
- CSLB - Frequently Asked Questions About Journey-level Experience · Contractors State License Board · Faq · verified September 17, 2026
- Contractors State License Law - 2026 CSLB Law Book (B&P Code Division 3, Chapter 9 and 16 CCR Division 8) · Cal. Bus. & Prof. Code Sec. 7065.4, 7068; former Sec. 7067.5 (repealed 2016); 16 CCR Div. 8 · Contractors State License Board · Statute · verified September 17, 2026
- CSLB - Licenses for Limited Liability Companies (LLC) · Cal. Bus. & Prof. Code Sec. 7065, 7071.6.5, 7071.19, 7076.2 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - If You Already Have a Contractors License From Another State or Country · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - Processing Times · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - Reciprocity Requirements · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - License Verification Request (reciprocity) · Contractors State License Board · Form · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.