LicensebyState

Missouri to Alabama: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 8 sources

Missouri does not issue a statewide general contractor license, so there is nothing to transfer. Here is Alabama's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Prime contractor license, including the NASCLA Accredited Examination route (states without a reciprocity agreement)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Alabama uses the NASCLA Accredited Examination for Commercial General Building Contractors as its own trade examination for the Building Construction (Commercial) classification: the Board's official PSI candidate bulletin states that for that examination PSI administers the NASCLA Accredited Examination, and prints the NASCLA content outline (115 questions, 330 minutes, 81 to pass, open book) as the Alabama commercial building trade exam. A contractor who already holds the NASCLA credential can release the transcript from NASCLA's National Examination Database instead of sitting the trade exam again; a contractor without it sits it through PSI like anyone else, and other classifications each have their own Alabama PSI trade exam. Nothing else is waived. Every applicant must pass the Alabama Business and Law examination, file the $300 prime application with a Qualifying Party Form, show a minimum net worth and working capital of $10,000 in an accountant-prepared financial statement, file proof of general liability insurance, register the entity with the Alabama Secretary of State, supply three commercial or industrial work references for each classification requested plus an organizational chart, and prove citizenship or lawful presence. The application must be complete and on file 30 days before one of the Board's quarterly meetings, and no one may book an examination until it is.

The trade examination is shown as waivable because Alabama's own commercial building trade exam is the NASCLA Accredited Examination; an applicant who has not passed it, or who wants a classification other than Building Construction (Commercial), still sits the relevant PSI trade examination, which is why it stays on the requirements list. Out-of-state experience is not converted into hours or years, because the Board sets no hour requirement; it counts through the work-experience section and the three reference forms, which the Board reviews to decide which classifications to grant. The Board does not publish a processing time or a bid-limit dollar table; ask the Board at (334) 272-5030. Licenses renew annually in a month set by the first letter of the company name, at $200 for a prime license and $100 for a subcontractor license, and a license left unrenewed for a year past its expiration date means a new application and retaking both the trade and business and law examinations. Amending a license to add a classification also requires that classification's trade examination.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • You must have passed a licensing exam in Missouri that the destination considers comparable.The NASCLA Accredited Examination for Commercial General Building Contractors is the examination Alabama itself uses for the Building Construction (Commercial) classification: the Board's PSI candidate bulletin says that for the Building Construction Examination (Commercial), PSI administers the NASCLA Accredited Examination, and prints its content outline as the Alabama exam. Candidates who have already passed it can send their transcript from NASCLA's National Examination Database at https://ned.nascla.org rather than repeating the exam. It is an examination credential and not a license: it waives no fee, no financial statement, no insurance, no reference and never the Alabama Business and Law examination. Because the Board does not publish a NASCLA policy statement of its own, confirm with the Board at (334) 272-5030 that a transcript will be accepted for the classification you want before relying on it.
  • Documented commercial or industrial work experience in each classification requested, evidenced by three completed projects and three reference forms. The Board sets no minimum number of years or hours.

What you'll do to get licensed in Alabama

  1. 1Law / code exam. Pass a law, rules, or code exam. Alabama Business and Law examination (formerly the General Contractor examination) through PSI: 50 questions, 120 minutes, 70% to pass, open book against the NASCLA Contractors Guide to Business Law and Project Management, Alabama General edition. It is required of all general contractors and the Board says it is never waived, including on reciprocity..
  2. 2Trade exam. Pass the destination's trade exam. One PSI trade examination for each classification requested. For Building Construction (Commercial), PSI administers the NASCLA Accredited Examination for Commercial General Building Contractors as the Alabama trade exam: 115 questions, 330 minutes, 81 to pass, open book. An applicant who has already passed the NASCLA Accredited Examination elsewhere can release the transcript from NASCLA's National Examination Database rather than sitting it again. Other classifications have their own Alabama PSI trade examinations, and a complete application must be on file before anyone may register to test..
  3. 3Exam fee. Pay the exam fee ($96). $96 for each PSI examination, rising to $106 for AL Building Construction (Commercial), AL Highways and Streets Contractor, AL Municipal and Utility Contractor and AL Heavy Railroad Construction. Paid to PSI when the examination is booked, after the Board determines eligibility..
  4. 4Application fee. Pay the application fee ($300). Prime contractor application fee of $300, paid by cashier's check or money order only; personal and company checks are returned and Alabama law does not allow refunds. A subcontractor application is $150. The fee gives the applicant one year from the date the Board receives it to complete the requirements..
  5. 5Financial responsibility. Show financial responsibility of at least $10,000. Minimum net worth and working capital of $10,000, shown in an audited, reviewed or compiled financial statement prepared under generally accepted accounting principles by a CPA or a licensed public accountant approved by the Board, dated no more than one year before submission. The Alabama Department of Transportation booklet is also accepted. Cash-basis and tax-basis statements are not accepted and deficits are not accepted. The figures submitted set the license's bid limit; a bank line of credit can raise working capital to the level of net worth, and a personal or parent-company statement plus the Board's Guaranty Agreement can raise the bid limit one step. The Board does not publish the dollar table that converts financial figures into bid limits..
  6. 6Insurance. Carry the required insurance. Proof of current general liability insurance filed with the application, in the exact name of the applicant, showing the Alabama Licensing Board for General Contractors at 445 Dexter Ave, Suite 3060, Montgomery, AL 36104 as certificate holder..
  7. 7Business license. Obtain a business license. The license is issued to a legal entity, so every entity, Alabama or out-of-state, must be registered with the Alabama Secretary of State before the license issues, and a dated print screen of the Entity Details record goes in the application. Individuals and general partnerships are exempt from this step. The state and county privilege license is a separate obligation from the Board's license..
  8. 8Other. Qualifying Party Form for each named qualifier, three work or job reference forms from three separate licensed general contractors, registered architects, registered professional engineers or Board-qualified persons covering commercial or industrial projects in each classification requested, a Principal Individual Questionnaire for anyone whose experience is being counted, an organizational chart for the applicant entity, a notarized affidavit, and proof of United States citizenship or lawful presence..

Published fees on this path total $396, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam
  • Trade exam
  • Exam fee · $96

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How Alabama licenses general contractors

Alabama general contractor · “General Contractor (Prime) license, by major classification such as Building Construction (BC)

Statewide license

Verified September 17, 2026· 5 sources

Issued by Alabama Licensing Board for General Contractors

Alabama licenses commercial and public general contracting statewide through the Alabama Licensing Board for General Contractors in Montgomery; residential homebuilding is licensed separately by the Home Builders Licensure Board. A license is required for any undertaking, including labor and materials, costing $100,000 or more, and for swimming pool construction of $5,000 or more; subcontractors working under a licensed prime at or above those figures must also be licensed, and an awarding authority must confirm licensure before accepting a bid. The license belongs to the business rather than the person: it is issued to an individual, partnership, corporation, LLC or LLP and is qualified by a named qualifying party on the Board's Qualifying Party Form, so an inbound contractor applies as or for the entity that will sign contracts. Licenses are granted by classification, with major classifications including Building Construction, Building Construction Under Four Stories, Highways and Streets, Municipal and Utility, Heavy and Railroad, Mechanical and Electrical, each with named subclassifications, and at least three completed projects must be documented for every classification requested. Every license also carries a bid limit set by the financial statement the applicant files rather than by skill. The Board names five states whose licensees may have the trade examination waived; the business law examination is never waived.

Moving to AlabamaLeaving Alabama

Why Missouri has nothing to transfer

Missouri general contractor · “Class A or B general contractor / construction business license (city-issued)

Licensed by cities and counties

Verified September 17, 2026· 18 sources

Issued by No state authority; cities and counties license or register commercial building contractors

Missouri has no statewide general, commercial or unlimited building contractor license, so there is nothing at state level for an out-of-state general contractor's license to transfer into and no NASCLA route to take, because Missouri is not a NASCLA participating state. Title XXII of the Revised Statutes, which contains every occupational licensing chapter, has no contractor or builder chapter, and the Division of Professional Registration regulates only one construction trade, electrical contractors. That voluntary statewide electrical contractor license under RSMo 324.900 to 324.945 is often mistaken for a general contractor credential; it is not. Its statutory definitions reach electrical contracting alone, and RSMo 324.925, which forces every city and county to honor it and bars them from testing a holder's proficiency, applies to electrical work only and expressly leaves local building regulation untouched. Commercial building is therefore governed city by city, and only one of Missouri's larger jurisdictions examines commercial builders: Independence issues Class A and Class B general contractor licenses to individuals on an ICC or Prometric score, a reciprocal license or a construction-related degree. Kansas City runs seventeen contractor license categories and none of them is a commercial building contractor - its own bulletin says a business license for construction "is the only city license required" for commercial building permits - and St. Louis City, St. Louis County, Springfield, Columbia and Jefferson City likewise license the trades and ask a commercial builder for nothing more than a business license.

How local licensing works in Missouri

How it works in Missouri. No Missouri agency licenses general, commercial or unlimited building contractors, and there is no state qualifying party, no state business-and-law exam and no NASCLA acceptance to rely on. Cities and counties control commercial construction through the building permit, and almost all of them regulate the electrical, mechanical, plumbing and fire trades rather than the builder. The one statewide rule worth knowing is RSMo 324.925: a political subdivision must recognize the state's voluntary electrical contractor license in place of its own and may not test that holder's electrical proficiency, on pain of having its local sales tax distributions withheld. The statute is limited to electrical contracting - it creates no equivalent obligation for builders, and it expressly preserves each subdivision's power to implement codes, require business licenses, issue permits and inspect work. So a general contractor arriving in Missouri qualifies separately in each jurisdiction, and the only genuinely portable credential is a passing score on a national contractor examination, which matters in exactly one of the places below.

Independence. The clearest commercial program in the state, and the only one of the seven that examines a commercial builder. The city licenses the individual rather than the business - "contractor licenses belong to the licensed individual, NOT a company" - and the general contractor license "covers framing, footings, and general construction" in three classes: Class A, residential and commercial; Class B, residential and commercial up to three stories; Class C, residential only. Qualification is ICC or Prometric test scores from within the last five years at 75 percent or better, or "a current, active license with a jurisdiction that we reciprocate with," which the city defines as "any jurisdiction that issues licenses in a similar fashion," or a bachelor's degree in engineering, architecture or construction science from an accredited college or university. Only a master license holder may apply for or be named on a building permit; journeymen may not. Licenses expire December 31 annually with no proration, and a business license is required in addition. [email protected], (816) 325-7401.

Kansas City. City Planning & Development enforces Article XII of the Kansas City Building and Rehabilitation Code through seventeen categories of contractor license - demolition, electrical, elevator, fire protection, gas-fired appliance, mechanical, pipe fitting, plumbing, residential building and sign - and there is no commercial or general building category among them. The city says so directly in its residential licensing bulletin: "a Business License for Construction is the only city license required for a contractor performing swimming pool construction, uncovered deck construction, retaining walls, non-structural remodeling, installation of roof mounted solar panels with no or limited structural work, and commercial building permits." A commercial builder therefore buys the business license from the Finance Department, keeps a current Missouri Secretary of State registration, and makes sure each licensed trade on the job holds its own Kansas City contractor license and employs a certificate-of-qualification supervisor. Where the general contractor self-performs a regulated trade, the full route applies: a $60.00 certificate application with notarized reference letters and a recognized exam score, applicant at least 21 with a high school diploma or GED and documented experience, then a $60.00 application and $181.00 issuance fee for the company license, renewed quadrennially at $181.00. [email protected], (816) 513-1500.

St. Louis City. The Building Division runs four boards of examiners - the Committee of Electrical Examiners, the Mechanical Contractors Board of Examiners, the Plumbers and Drainlayers Board of Examiners and the Sprinkler System Contractors Board of Examiners - and none of them covers building contractors. A commercial general contractor takes out a construction or contracting business license from the License Collector: state tax number, application, clearance from the Collector of Revenue, an occupancy permit from the Building Division, and proof of workers' compensation coverage or a signed statement that it is not legally required. "All general contractors are required to furnish a list of the sub-contractors on any job to the License Collector." There is no exam, bond or experience review. Building Division, City Hall Room 425, 1200 Market St., (314) 622-3313.

St. Louis County. "The County does not license general contractors." It "does verify that out-of-state contractors are registered with the state," and it "does register all repair contractors that obtain permits for repairs from a natural disaster such as a flood or severe storm." Its licensing effort goes into the trades: electrical, mechanical (four contractor categories under the county Mechanical Code, chapter 1108 SLCRO) and plumbing, each with a licensing board, and "the County only issues trade permits to licensed contractors." Commercial permits for unincorporated county land come from Transportation and Public Works at 41 South Central Ave., 6th Floor, Clayton, 314-615-5184; inside the county's many municipalities, check the city's own building department too.

Springfield. A permit will not issue until "a City-licensed General Contractor (GC) or Trade Master (TM)" is named on it, so the general contractor credential is compulsory - but it is a business license from the License Division rather than a tested qualification. The city's examining program covers electricians, plumbers, gas fitters and mechanical craftsmen only, who must be "tested and certified to afford competence and knowledge of the codes" and who may present an identical Prometric, Experior, Block or ICC examination passed at 75 percent or better in another jurisdiction. Contractors file proof of workers' compensation or sign a notarized exemption statement. Permit desk 417-864-1585; License Division 417-864-1617.

Columbia. Building and Site Development certifies trades only - Trade Apprentice, Electrical, Mechanical and Plumbing - with tests "administered by a private testing firm according to a regular schedule," and the city maintains boards of electrical, plumbing and mechanical examiners but none for builders. A commercial contractor holds a city business license at $0.25 per $1,000 of gross receipts, minimum $75 and maximum $10,000 a year, plus a $45 application fee, and files a certificate of workers' compensation insurance if it has one or more employees. Business License Division 573-874-7378.

Jefferson City. "All contractors performing work in Jefferson City must have a local license," but only "electrical and plumbing contractors and their employees are required to obtain specific trade licenses directly from the Building Regulations Division"; "all other contractors are directed to the Business License Division to obtain their business license." A commercial builder files for the business license and sits no examination. Building Regulations (573) 634-6410, Business License Division (573) 634-6322.

Everywhere else. Other Missouri cities and counties write their own ordinances, and outside city limits many rural counties have no building permit program at all. Before bidding, ask each jurisdiction whether it licenses builders or only the trades, whether it will accept an ICC or Prometric score in place of its own test, and what business license, workers' compensation proof and insurance it requires. Expect to hold a separate credential in every jurisdiction where you pull permits.

Moving to MissouriLeaving Missouri

Common questions

Do I have to take the Alabama general contractor exam if I'm licensed in Missouri?
The trade exam is waived, but Alabama requires a law or code exam.
What does it cost to get a Alabama general contractor license from Missouri?
Published fees on this path total $396, not counting exam vendor fees or bonds.
Do my Missouri work hours count in Alabama?
Yes. Documented out-of-state experience counts toward Alabama's eligibility requirements.
Does it work the other way, from Alabama to Missouri?
Not necessarily. Reciprocity is directed. Going from Alabama to Missouri, the mechanism is not applicable.

Sources

  1. Alabama Licensing Board for General Contractors - How to Apply for a License (fees, reciprocity, references) · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  2. Alabama Licensing Board for General Contractors - Contractor Licensing Law (definition and thresholds) · Ala. Code §§ 34-8-1, 34-8-2, 34-8-7, 34-8-8, 34-8-9 · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  3. Prime Contractor Application and Instructions - Alabama Licensing Board for General Contractors (rev. 02/2022) · Ala. Admin. Code r. 230-X-1-.33; Ala. Code § 34-8-2(b) · Alabama Licensing Board for General Contractors · Form · verified September 17, 2026
  4. State of Alabama General Contractors - Candidate Information Bulletin (PSI, updated 1/23/26) · PSI Services LLC for the Alabama Licensing Board for General Contractors · Other · verified September 17, 2026
  5. Alabama Licensing Board for General Contractors - Reciprocity (reciprocal states and exam waiver) · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  6. Alabama Licensing Board for General Contractors - Renewal Information (staggered renewal months and fees) · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  7. Alabama Licensing Board for General Contractors - Testing (PSI bulletin and trade exam requirement) · Ala. Admin. Code r. 230-X-1-.27, 230-X-1-.34 · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  8. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related