Missouri to Alaska: general contractor license reciprocity
Missouri does not issue a statewide general contractor license, so there is nothing to transfer. Here is Alaska's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Registration with nothing carried over from another state (every state)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Alaska has no reciprocity, endorsement or examination waiver for contractors, and it does not participate in the NASCLA Accredited Examination. In practice that costs an inbound general contractor very little at this level, because Alaska asks nobody for an examination or for trade experience: the General Contractor registration is granted on a completed application, a $25,000 bond, insurance and fees. A contractor holding a demanding license in another state and a contractor with no license at all therefore file the same form and pay the same $350. What does not transfer is the right to work on homes: the residential contractor endorsement on this page's residential level takes a cold climate course and an Alaska examination that no out-of-state credential replaces. The division does not publish a processing time, saying only that an application generally takes several weeks once the complete packet has been submitted; progress can be tracked in the MY LICENSE portal and the program is reachable at [email protected] or (907) 465-2050.
Registration is required before any bid is submitted, not merely before work starts (AS 08.18.011(a)), and a general contractor may not award work to an unregistered specialty contractor. A partnership or joint venture counts as registered if one of the general partners or venturers whose name appears in the trading name is registered. Mechanical and electrical contractor registrations are separate categories that additionally require a Mechanical Administrator or Electrical Administrator license under AS 08.40; they are covered by the mechanical trades pages rather than here. Application documents and verifications from other licensing jurisdictions go stale after 12 months under 12 AAC 02.915, and an application is treated as abandoned after 12 months without correspondence, with the application fee forfeited.
At a glance
- Trade exam
- Waived
- Law / code exam
- Not required
- Out-of-state hours
- Do not count
What you must already have
- None about the applicant's history. AS 08.18.021 asks only for the type of contracting activity, the names and addresses of the owner, partners or corporate officers and statutory agent, and a Social Security number. There is no minimum experience, no apprenticeship, no examination and no qualifying individual for a general contractor registration in Alaska.
What you'll do to get licensed in Alaska
- 1Application fee. Pay the application fee ($100). $100 nonrefundable application fee filed with the General Contractor Registration Application (#08-4815), online through MyAlaska or on paper. It is not refunded if the application is denied or abandoned..
- 2License fee. Pay the license or certificate fee ($250). $250 registration fee, making $350 due with the application. Registrations run two years and expire on September 30 of even-numbered years whatever date they were issued, except one issued within 90 days of an expiration date, which runs to the next cycle. Renewal is filed online through MY LICENSE and requires current bond and insurance..
- 3Surety bond. Post a surety bond ($25,000). $25,000 surety bond running to the State on the division's Surety Bond form (#08-4971) with the surety's power of attorney attached, signed by both the contractor and the surety. It answers for state and local taxes, for labor, material and equipment suppliers, and for judgments arising from negligent or improper work, breach of contract or damage to public facilities. It must stay in force for three years until canceled by the surety, the principal or the department. A cashier's check cash deposit, or a time certificate of deposit or savings passbook made out to the State of Alaska in trust for the contractor, may be filed instead. A specialty contractor posts $10,000 and a handyman contractor $5,000..
- 4Insurance. Carry the required insurance. Public liability and property damage insurance covering Alaska contracting operations, with limits of at least $20,000 for damage to property, $50,000 for injury including death to any one person and $100,000 for injury including death to more than one person. The division's own Certificate of Insurance Coverage form (#08-4977) or a certificate from the carrier is accepted. Workers' compensation from an Alaska-admitted carrier, or a self-insurance certificate, is required if the business uses employee labor or is a corporation or LLC. Bond and insurance documents must reach the division within 30 days of issuance and must show the business name exactly as it appears on the application, including the entity name and any DBA..
- 5Business license. Obtain a business license. A corporation, LLC or other registered entity must already be on file with the division's Corporations Section, with its Alaska entity number given on the application, before the contractor application is processed. A State of Alaska business license under AS 43.70 is then obtained after the professional registration is issued. Advertising, contracts, signs and documents must carry the registered contractor name, the registration number, the mailing address and the principal place of business, or send customers to a website that carries all of them..
- 6Contractor license. Hold or obtain a contractor license (if applicable). Choosing the right category matters more in Alaska than qualifying for it. A business whose work uses not more than three trades registers as a Specialty Contractor instead, and one whose projects each have an aggregate contract price of $10,000 or less, counting all labor and materials, may register as a Handyman Contractor. Splitting a larger job into contracts under $10,000 to reach the lower bond is expressly treated as evasion. Mechanical and electrical contractor registrations additionally require a licensed Mechanical Administrator or Electrical Administrator under AS 08.40..
- 7Other. A signed application naming the DBA and every owner and principal officer or member, and a United States Social Security number on file with the division or a signed exemption request in its place. A business that believes it falls outside the chapter may file the division's Request for Exemption from Construction Contractors Regulation (#08-4809) rather than guessing..
Published fees on this path total $350, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $25,000
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Alaska licenses general contractors
Alaska general contractor · “General Contractor (registration without residential endorsement)”
Statewide license
Alaska's unlimited tier is the General Contractor certificate of registration issued by the Construction Contractors Program at the Division of Corporations, Business and Professional Licensing. It covers commercial work and operations that use three or more trades or that supervise mechanical and specialty subcontractors, and it carries no dollar limit. It is important to understand what this registration is and is not: AS 08.18 sets no examination, no experience and no qualifying individual for it, so it is a registration backed by money rather than a test of skill, and the only competency credential in the Alaska contractor scheme is the residential contractor endorsement that sits on top of it. The registration belongs to the business, which files a $25,000 surety bond or an equivalent cash deposit, public liability and property damage insurance, workers' compensation where employees are used, a $100 application fee and a $250 registration fee. Below this tier sit the Specialty Contractor registration, limited to work using not more than three trades and bonded at $10,000, and the Handyman Contractor registration, limited to projects with an aggregate contract price of $10,000 or less and bonded at $5,000. A general contractor may not build, remodel or bid residential work on a one-to-four-unit dwelling above 25 percent of the structure's value without the residential contractor endorsement.
Why Missouri has nothing to transfer
Missouri general contractor · “Class A or B general contractor / construction business license (city-issued)”
Licensed by cities and counties
Issued by No state authority; cities and counties license or register commercial building contractors
Missouri has no statewide general, commercial or unlimited building contractor license, so there is nothing at state level for an out-of-state general contractor's license to transfer into and no NASCLA route to take, because Missouri is not a NASCLA participating state. Title XXII of the Revised Statutes, which contains every occupational licensing chapter, has no contractor or builder chapter, and the Division of Professional Registration regulates only one construction trade, electrical contractors. That voluntary statewide electrical contractor license under RSMo 324.900 to 324.945 is often mistaken for a general contractor credential; it is not. Its statutory definitions reach electrical contracting alone, and RSMo 324.925, which forces every city and county to honor it and bars them from testing a holder's proficiency, applies to electrical work only and expressly leaves local building regulation untouched. Commercial building is therefore governed city by city, and only one of Missouri's larger jurisdictions examines commercial builders: Independence issues Class A and Class B general contractor licenses to individuals on an ICC or Prometric score, a reciprocal license or a construction-related degree. Kansas City runs seventeen contractor license categories and none of them is a commercial building contractor - its own bulletin says a business license for construction "is the only city license required" for commercial building permits - and St. Louis City, St. Louis County, Springfield, Columbia and Jefferson City likewise license the trades and ask a commercial builder for nothing more than a business license.
How local licensing works in Missouri
How it works in Missouri. No Missouri agency licenses general, commercial or unlimited building contractors, and there is no state qualifying party, no state business-and-law exam and no NASCLA acceptance to rely on. Cities and counties control commercial construction through the building permit, and almost all of them regulate the electrical, mechanical, plumbing and fire trades rather than the builder. The one statewide rule worth knowing is RSMo 324.925: a political subdivision must recognize the state's voluntary electrical contractor license in place of its own and may not test that holder's electrical proficiency, on pain of having its local sales tax distributions withheld. The statute is limited to electrical contracting - it creates no equivalent obligation for builders, and it expressly preserves each subdivision's power to implement codes, require business licenses, issue permits and inspect work. So a general contractor arriving in Missouri qualifies separately in each jurisdiction, and the only genuinely portable credential is a passing score on a national contractor examination, which matters in exactly one of the places below.
Independence. The clearest commercial program in the state, and the only one of the seven that examines a commercial builder. The city licenses the individual rather than the business - "contractor licenses belong to the licensed individual, NOT a company" - and the general contractor license "covers framing, footings, and general construction" in three classes: Class A, residential and commercial; Class B, residential and commercial up to three stories; Class C, residential only. Qualification is ICC or Prometric test scores from within the last five years at 75 percent or better, or "a current, active license with a jurisdiction that we reciprocate with," which the city defines as "any jurisdiction that issues licenses in a similar fashion," or a bachelor's degree in engineering, architecture or construction science from an accredited college or university. Only a master license holder may apply for or be named on a building permit; journeymen may not. Licenses expire December 31 annually with no proration, and a business license is required in addition. [email protected], (816) 325-7401.
Kansas City. City Planning & Development enforces Article XII of the Kansas City Building and Rehabilitation Code through seventeen categories of contractor license - demolition, electrical, elevator, fire protection, gas-fired appliance, mechanical, pipe fitting, plumbing, residential building and sign - and there is no commercial or general building category among them. The city says so directly in its residential licensing bulletin: "a Business License for Construction is the only city license required for a contractor performing swimming pool construction, uncovered deck construction, retaining walls, non-structural remodeling, installation of roof mounted solar panels with no or limited structural work, and commercial building permits." A commercial builder therefore buys the business license from the Finance Department, keeps a current Missouri Secretary of State registration, and makes sure each licensed trade on the job holds its own Kansas City contractor license and employs a certificate-of-qualification supervisor. Where the general contractor self-performs a regulated trade, the full route applies: a $60.00 certificate application with notarized reference letters and a recognized exam score, applicant at least 21 with a high school diploma or GED and documented experience, then a $60.00 application and $181.00 issuance fee for the company license, renewed quadrennially at $181.00. [email protected], (816) 513-1500.
St. Louis City. The Building Division runs four boards of examiners - the Committee of Electrical Examiners, the Mechanical Contractors Board of Examiners, the Plumbers and Drainlayers Board of Examiners and the Sprinkler System Contractors Board of Examiners - and none of them covers building contractors. A commercial general contractor takes out a construction or contracting business license from the License Collector: state tax number, application, clearance from the Collector of Revenue, an occupancy permit from the Building Division, and proof of workers' compensation coverage or a signed statement that it is not legally required. "All general contractors are required to furnish a list of the sub-contractors on any job to the License Collector." There is no exam, bond or experience review. Building Division, City Hall Room 425, 1200 Market St., (314) 622-3313.
St. Louis County. "The County does not license general contractors." It "does verify that out-of-state contractors are registered with the state," and it "does register all repair contractors that obtain permits for repairs from a natural disaster such as a flood or severe storm." Its licensing effort goes into the trades: electrical, mechanical (four contractor categories under the county Mechanical Code, chapter 1108 SLCRO) and plumbing, each with a licensing board, and "the County only issues trade permits to licensed contractors." Commercial permits for unincorporated county land come from Transportation and Public Works at 41 South Central Ave., 6th Floor, Clayton, 314-615-5184; inside the county's many municipalities, check the city's own building department too.
Springfield. A permit will not issue until "a City-licensed General Contractor (GC) or Trade Master (TM)" is named on it, so the general contractor credential is compulsory - but it is a business license from the License Division rather than a tested qualification. The city's examining program covers electricians, plumbers, gas fitters and mechanical craftsmen only, who must be "tested and certified to afford competence and knowledge of the codes" and who may present an identical Prometric, Experior, Block or ICC examination passed at 75 percent or better in another jurisdiction. Contractors file proof of workers' compensation or sign a notarized exemption statement. Permit desk 417-864-1585; License Division 417-864-1617.
Columbia. Building and Site Development certifies trades only - Trade Apprentice, Electrical, Mechanical and Plumbing - with tests "administered by a private testing firm according to a regular schedule," and the city maintains boards of electrical, plumbing and mechanical examiners but none for builders. A commercial contractor holds a city business license at $0.25 per $1,000 of gross receipts, minimum $75 and maximum $10,000 a year, plus a $45 application fee, and files a certificate of workers' compensation insurance if it has one or more employees. Business License Division 573-874-7378.
Jefferson City. "All contractors performing work in Jefferson City must have a local license," but only "electrical and plumbing contractors and their employees are required to obtain specific trade licenses directly from the Building Regulations Division"; "all other contractors are directed to the Business License Division to obtain their business license." A commercial builder files for the business license and sits no examination. Building Regulations (573) 634-6410, Business License Division (573) 634-6322.
Everywhere else. Other Missouri cities and counties write their own ordinances, and outside city limits many rural counties have no building permit program at all. Before bidding, ask each jurisdiction whether it licenses builders or only the trades, whether it will accept an ICC or Prometric score in place of its own test, and what business license, workers' compensation proof and insurance it requires. Expect to hold a separate credential in every jurisdiction where you pull permits.
- Independence (Community Development - Class A and Class B general contractor licenses, exam or reciprocal license required)
- Kansas City (City Planning & Development - no commercial building contractor license; business license for construction)
- St. Louis City (License Collector - construction/contracting business license; Building Division examines trades only)
- St. Louis County (no general contractor license; electrical, mechanical and plumbing licensing only)
- Springfield (Building Development Services - City-licensed General Contractor must be named on the permit)
- Columbia (Building and Site Development - trade certifications only; contractors hold a city business license)
- Jefferson City (Building Regulations Division - electrical and plumbing licensed; all other contractors take a business license)
Common questions
- Do I have to take the Alaska general contractor exam if I'm licensed in Missouri?
- No. The trade exam is waived on this path.
- What does it cost to get a Alaska general contractor license from Missouri?
- Published fees on this path total $350, not counting exam vendor fees or bonds.
- Do my Missouri work hours count in Alaska?
- No. Alaska does not credit out-of-state hours on this path.
- Does it work the other way, from Alaska to Missouri?
- Not necessarily. Reciprocity is directed. Going from Alaska to Missouri, the mechanism is not applicable.
Sources
- Construction Contractor Professional Licensing - Bond and Insurance Quick Facts · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Other · verified September 17, 2026
- Construction Contractors - Alaska Division of Corporations, Business and Professional Licensing · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
- Construction Contractors FAQs - Alaska Division of Corporations, Business and Professional Licensing · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Faq · verified September 17, 2026
- Applications and Forms - Alaska Construction Contractors Program · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
- Statutes and Regulations - Construction Contractors (AS 08.18 and 12 AAC 21), September 2023 · AS 08.18.011, .013, .021, .024, .025, .031, .041, .051, .071, .101; 12 AAC 21.650, .660, .680, .690, .695, .700 · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Admin Rule · verified September 17, 2026
- Form 08-4815 - General Contractor Registration Application (rev. 09/03/2025) · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Form · verified September 17, 2026
- License Expiration Dates - Alaska Division of Corporations, Business and Professional Licensing · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
- National Organizations - Alaska Construction Contractors Program · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
- Form 08-4818 - Specialty Contractor Registration Application (rev. 09/03/2025) · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Form · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.