New York to Alaska: general contractor license reciprocity
New York does not issue a statewide general contractor license, so there is nothing to transfer. Here is Alaska's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Registration with nothing carried over from another state (every state)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Alaska has no reciprocity, endorsement or examination waiver for contractors, and it does not participate in the NASCLA Accredited Examination. In practice that costs an inbound general contractor very little at this level, because Alaska asks nobody for an examination or for trade experience: the General Contractor registration is granted on a completed application, a $25,000 bond, insurance and fees. A contractor holding a demanding license in another state and a contractor with no license at all therefore file the same form and pay the same $350. What does not transfer is the right to work on homes: the residential contractor endorsement on this page's residential level takes a cold climate course and an Alaska examination that no out-of-state credential replaces. The division does not publish a processing time, saying only that an application generally takes several weeks once the complete packet has been submitted; progress can be tracked in the MY LICENSE portal and the program is reachable at [email protected] or (907) 465-2050.
Registration is required before any bid is submitted, not merely before work starts (AS 08.18.011(a)), and a general contractor may not award work to an unregistered specialty contractor. A partnership or joint venture counts as registered if one of the general partners or venturers whose name appears in the trading name is registered. Mechanical and electrical contractor registrations are separate categories that additionally require a Mechanical Administrator or Electrical Administrator license under AS 08.40; they are covered by the mechanical trades pages rather than here. Application documents and verifications from other licensing jurisdictions go stale after 12 months under 12 AAC 02.915, and an application is treated as abandoned after 12 months without correspondence, with the application fee forfeited.
At a glance
- Trade exam
- Waived
- Law / code exam
- Not required
- Out-of-state hours
- Do not count
What you must already have
- None about the applicant's history. AS 08.18.021 asks only for the type of contracting activity, the names and addresses of the owner, partners or corporate officers and statutory agent, and a Social Security number. There is no minimum experience, no apprenticeship, no examination and no qualifying individual for a general contractor registration in Alaska.
What you'll do to get licensed in Alaska
- 1Application fee. Pay the application fee ($100). $100 nonrefundable application fee filed with the General Contractor Registration Application (#08-4815), online through MyAlaska or on paper. It is not refunded if the application is denied or abandoned..
- 2License fee. Pay the license or certificate fee ($250). $250 registration fee, making $350 due with the application. Registrations run two years and expire on September 30 of even-numbered years whatever date they were issued, except one issued within 90 days of an expiration date, which runs to the next cycle. Renewal is filed online through MY LICENSE and requires current bond and insurance..
- 3Surety bond. Post a surety bond ($25,000). $25,000 surety bond running to the State on the division's Surety Bond form (#08-4971) with the surety's power of attorney attached, signed by both the contractor and the surety. It answers for state and local taxes, for labor, material and equipment suppliers, and for judgments arising from negligent or improper work, breach of contract or damage to public facilities. It must stay in force for three years until canceled by the surety, the principal or the department. A cashier's check cash deposit, or a time certificate of deposit or savings passbook made out to the State of Alaska in trust for the contractor, may be filed instead. A specialty contractor posts $10,000 and a handyman contractor $5,000..
- 4Insurance. Carry the required insurance. Public liability and property damage insurance covering Alaska contracting operations, with limits of at least $20,000 for damage to property, $50,000 for injury including death to any one person and $100,000 for injury including death to more than one person. The division's own Certificate of Insurance Coverage form (#08-4977) or a certificate from the carrier is accepted. Workers' compensation from an Alaska-admitted carrier, or a self-insurance certificate, is required if the business uses employee labor or is a corporation or LLC. Bond and insurance documents must reach the division within 30 days of issuance and must show the business name exactly as it appears on the application, including the entity name and any DBA..
- 5Business license. Obtain a business license. A corporation, LLC or other registered entity must already be on file with the division's Corporations Section, with its Alaska entity number given on the application, before the contractor application is processed. A State of Alaska business license under AS 43.70 is then obtained after the professional registration is issued. Advertising, contracts, signs and documents must carry the registered contractor name, the registration number, the mailing address and the principal place of business, or send customers to a website that carries all of them..
- 6Contractor license. Hold or obtain a contractor license (if applicable). Choosing the right category matters more in Alaska than qualifying for it. A business whose work uses not more than three trades registers as a Specialty Contractor instead, and one whose projects each have an aggregate contract price of $10,000 or less, counting all labor and materials, may register as a Handyman Contractor. Splitting a larger job into contracts under $10,000 to reach the lower bond is expressly treated as evasion. Mechanical and electrical contractor registrations additionally require a licensed Mechanical Administrator or Electrical Administrator under AS 08.40..
- 7Other. A signed application naming the DBA and every owner and principal officer or member, and a United States Social Security number on file with the division or a signed exemption request in its place. A business that believes it falls outside the chapter may file the division's Request for Exemption from Construction Contractors Regulation (#08-4809) rather than guessing..
Published fees on this path total $350, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $25,000
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Alaska licenses general contractors
Alaska general contractor · “General Contractor (registration without residential endorsement)”
Statewide license
Alaska's unlimited tier is the General Contractor certificate of registration issued by the Construction Contractors Program at the Division of Corporations, Business and Professional Licensing. It covers commercial work and operations that use three or more trades or that supervise mechanical and specialty subcontractors, and it carries no dollar limit. It is important to understand what this registration is and is not: AS 08.18 sets no examination, no experience and no qualifying individual for it, so it is a registration backed by money rather than a test of skill, and the only competency credential in the Alaska contractor scheme is the residential contractor endorsement that sits on top of it. The registration belongs to the business, which files a $25,000 surety bond or an equivalent cash deposit, public liability and property damage insurance, workers' compensation where employees are used, a $100 application fee and a $250 registration fee. Below this tier sit the Specialty Contractor registration, limited to work using not more than three trades and bonded at $10,000, and the Handyman Contractor registration, limited to projects with an aggregate contract price of $10,000 or less and bonded at $5,000. A general contractor may not build, remodel or bid residential work on a one-to-four-unit dwelling above 25 percent of the structure's value without the residential contractor endorsement.
Why New York has nothing to transfer
New York general contractor · “General Contractor Registration (NYC) / General Contractor and Light Commercial Contractor license (Buffalo)”
Licensed by cities and counties
Issued by New York City and city building departments (no statewide general or building contractor license)
New York has no statewide general, commercial, building or unlimited contractor license, and no state board examines or qualifies builders. The Department of State's Division of Licensing Services regulates 35 occupations and none of them is contractor; what the state does license around construction is narrow and specialized — home inspectors, manufactured housing, security and fire alarm installers through the Department of State, and asbestos contractors through the Department of Labor — while the individual building trades are licensed locally rather than by the state. Commercial and new-building work is controlled through the building permit, city by city. New York City requires a General Contractor Registration from the Department of Buildings before a contractor can pull New Building permits for one-, two- and three-family homes, and a registered Construction Superintendent at new buildings and demolitions nine stories and below; Buffalo issues graded General Contractor, New Housing, Light Commercial and Demolition licenses through a monthly advisory board. Most county home improvement laws stop short of this tier on purpose — Suffolk's and Westchester's both exclude new home construction — so outside the cities that license, a commercial builder in New York works under the permit and the Uniform Code with no contractor credential at all. A general contractor arriving from another state has nothing to transfer at state level and no reciprocity to apply for: the work is registering where registration is required and making sure the electrical, plumbing and fire-protection scopes are performed by people holding the right local trade licenses.
How local licensing works in New York
How it works in New York. No New York agency issues a general, commercial, building or unlimited contractor license. There is no state qualifying party, no business-and-law exam, no financial statement filed with a state board and no NASCLA route, because there is no board to file with. That means an out-of-state general contractor's license, its classification and any NASCLA Accredited Examination score carry no weight at state level. What decides whether you can work is the jurisdiction: a registration in New York City, a graded license in Buffalo, a county home improvement license where the job is a renovation rather than a new building, and the correct local trade licenses for the subcontracted scopes everywhere.
New York City — General Contractor Registration. The Department of Buildings requires that "all contractors who build one-, two-, and three-family homes must register with the Department to obtain New Building permits." Registration is $300, renewal $240, late renewal $50, and the term is three years. The applicant must "be at least eighteen (18) years old", "be able to read and write the English language", show good moral character, pass a background investigation and prove financial solvency — the last of which means a company bank account with "a minimum end balance of at least $25,000 for the past three (3) months", evidenced by three consecutive statements. Insurance is general liability with a $1 million minimum, plus workers' compensation and disability certificates. The filing is a notarized LIC6 form with EIN documentation, government photo ID, a Child Support Certification Form and proof of business address, submitted through DOB NOW; paper applications have not been accepted since September 7, 2021. There is no exam and no published experience minimum.
New York City — larger and commercial work. For buildings above the one-to-three-family tier, New York City does not license the general contractor at all; it regulates the site. "A registered Construction Superintendent is required at new buildings and buildings under demolition nine stories and below" — registration $100, renewal $50, term three years, applied for in DOB NOW after a DOB-approved training course. Bigger jobs are governed by site safety requirements and by DOB's other licenses and registrations: electricians, master and journeyman plumbers and fire suppression piping contractors, riggers, sign hangers, hoisting machine operators, welders, concrete safety managers and concrete testing laboratories, site safety professionals and special inspection agencies. Qualifications for all of them are in Chapter 4 of the 2022 NYC Administrative Code. Separately, any work on residential property in the five boroughs still needs the DCWP Home Improvement Contractor license — see the residential level, because in practice most contractors working in New York City need that one first.
Buffalo. Buffalo is the New York city that most closely resembles a classic graded contractor license. Under Chapter 144 of the City Ordinances, anyone "doing construction work in the City of Buffalo" needs a city Contractor License, which "does not allow for plumbing, heating, cooling or electrical work", and working without one is an unclassified misdemeanor carrying up to $1,000 or 60 days. At this tier the categories are General Contractor — "Companies with extensive experience in major construction work will qualify. To perform construction of new residential and commercial structures without limitations", including infrastructure — New Housing Contractor (new residential and commercial structures up to three stories plus remodeling, excluding infrastructure), Light Commercial Contractor (repairs, remodeling, alterations, conversions and modernization of commercial property, plus additions and new accessory structures up to three stories), Construction Manager (oversight and scheduling only, cannot perform construction work) and Demolition Grades 1 through 4. Minimum general liability aggregates are $2,000,000 for General Contractor and every demolition grade, $500,000 for Light Commercial, Specialty, Subcontractor and New Housing, and $50,000 for Handyman and Construction Manager, with the Office of Licenses at 301 City Hall as certificate holder and no PO Box addresses accepted. Demolition Grades 2 and 3 need reference letters from two townships where demolition work was performed, waivable with a resume showing ten years of demolition experience; Grade 4 needs a New York State explosives license held by a major corporate officer. New Housing applicants file copies of the warranties given to new home buyers. Asbestos abatement requires the firm's New York State Department of Labor Asbestos License, lead abatement requires EPA firm certification, and fire suppression system installation requires approval from the Chief of Fire Prevention. Applications must arrive at least seven days before the monthly Construction & Home Improvement Advisory Board meeting, and "attendance at the meeting is mandatory for the applicant" unless a notarized letter authorizes a representative. The fee is not printed on the application packet; ask the Office of Licenses on (716) 851-6583.
The counties stop below this tier. Nassau, Suffolk, Westchester, Rockland and Putnam license home improvement, not building. Suffolk's Chapter 563 definition expressly excludes "the construction of a new home", and the Westchester law states that it "shall not apply to ... the construction of a new home building", along with plumbing work, electrical work and architectural services. A builder putting up new houses in those counties may therefore need no county license at all, while the same builder's remodeling arm does — and both still answer to the town or village building department. Check the scope with the county before assuming either way.
Yonkers and Rochester. Yonkers licenses home improvement contractors who "renovate existing dwellings of 1 to 3 families" and does not issue a commercial builder license; new and commercial construction is handled through the Department of Housing and Buildings permit process. Rochester licenses only electricians, plumbers and stationary engineers / refrigeration operators, and holds the permit applicant responsible for making sure "all required contractors are licensed, proof of insurance is filed and the project complies with the permit".
Everywhere else. Outside the jurisdictions above, commercial construction in New York is governed by the Uniform Code and the local building department, and in most towns and villages a general contractor needs no license — only permits, insurance and licensed trades. Confirm with the building department for the job site, and where the project involves residential property anywhere in the state, General Business Law Article 36-A's written-contract and deposit-escrow rules still apply.
- New York City (Department of Buildings — General Contractor Registration for 1-, 2- and 3-family New Building permits)
- New York City (Department of Buildings — Construction Superintendent registration, nine stories and below)
- Buffalo (Office of Licenses — General Contractor, New Housing, Light Commercial, Construction Manager and Demolition licenses)
- Suffolk County (home improvement license excludes the construction of a new home)
- Westchester County (home improvement license does not apply to the construction of a new home building)
- Yonkers (Consumer Protection Bureau licenses 1-3 family renovation only; no commercial builder license)
- Rochester (Licensed Trades — electrical, plumbing and SE/RO only; no builder license)
Common questions
- Do I have to take the Alaska general contractor exam if I'm licensed in New York?
- No. The trade exam is waived on this path.
- What does it cost to get a Alaska general contractor license from New York?
- Published fees on this path total $350, not counting exam vendor fees or bonds.
- Do my New York work hours count in Alaska?
- No. Alaska does not credit out-of-state hours on this path.
- Does it work the other way, from Alaska to New York?
- Not necessarily. Reciprocity is directed. Going from Alaska to New York, the mechanism is not applicable.
Sources
- Construction Contractor Professional Licensing - Bond and Insurance Quick Facts · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Other · verified September 17, 2026
- Construction Contractors - Alaska Division of Corporations, Business and Professional Licensing · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
- Construction Contractors FAQs - Alaska Division of Corporations, Business and Professional Licensing · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Faq · verified September 17, 2026
- Applications and Forms - Alaska Construction Contractors Program · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
- Statutes and Regulations - Construction Contractors (AS 08.18 and 12 AAC 21), September 2023 · AS 08.18.011, .013, .021, .024, .025, .031, .041, .051, .071, .101; 12 AAC 21.650, .660, .680, .690, .695, .700 · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Admin Rule · verified September 17, 2026
- Form 08-4815 - General Contractor Registration Application (rev. 09/03/2025) · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Form · verified September 17, 2026
- License Expiration Dates - Alaska Division of Corporations, Business and Professional Licensing · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
- National Organizations - Alaska Construction Contractors Program · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Agency Page · verified September 17, 2026
- Form 08-4818 - Specialty Contractor Registration Application (rev. 09/03/2025) · Alaska Department of Commerce, Community, and Economic Development (CBPL) · Form · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.