New York to Arizona: general contractor license reciprocity
New York does not issue a statewide general contractor license, so there is nothing to transfer. Here is Arizona's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
NASCLA exam or out-of-state waiver of the trade examination (every origin state)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Arizona has no reciprocity agreement with any state, so every inbound applicant follows the same route and no origin state is treated better than another. The Registrar's own words are: "Arizona does not have direct reciprocity with any state; however, the Registrar does offer out of state applicants the opportunity to request a waiver of the required trade exam and experience, if the qualifying party has held a comparable license in another state within the past 5 years of the application date and the license was obtained by a trade examination." There are two ways past the Arizona trade exam at this level. The first is the NASCLA Accredited Examination for Commercial General Building Contractors, which the Registrar accepts in place of its own trade exam for the B-1, B-2, KB-1 and KB-2 classifications; you may sit it in any participating jurisdiction and buy a transcript from NASCLA so the Registrar can see the result. The second is the out-of-state waiver on Form RC-L-200G: you fill in your side, send it to the agency that issued your license so it can verify your license history, exams and years of experience and stamp it with a state seal, then enclose the returned form with your Arizona application in place of a trade exam result. That waiver is discretionary and is not pre-approved. The Arizona Statutes and Rules Exam is never waived on either route for an out-of-state applicant. Four years of trade experience, a license bond, background checks for every person named on the application, entity registration and the fees all still apply.
The rule behind the waiver is A.A.C. R4-9-106(E)(1): the Registrar "may waive the trade examination requirement if records reflect that the qualifying party is currently or has previously been a qualifying party for a licensee in the other state in the same classification, or in a comparable classification, within the preceding five years." Because it is written as "may waive", it is a case-by-case decision rather than an entitlement, and comparability of your out-of-state classification to the Arizona B-1 or B-2 classification is the Registrar's call. Form RC-L-200G also cites A.R.S. 32-1122(A)(4), A.R.S. 32-1122(E)(1) and A.R.S. 32-4302 and says a qualifying applicant may see "the waiver of the examination requirements, experience requirements, or both." A.R.S. 32-4302 is Arizona's universal licensing recognition statute: it requires a Title 32 license to be issued to a person who establishes residence in Arizona and who has held a good-standing license in another state at the same practice level for at least a year, obtained by examination where the other state required one, with no discipline or pending investigation; subsection (C) preserves the state-laws exam, so the Arizona Statutes and Rules Exam still applies. The Registrar's Service Members and Veterans page publishes the no-examination version of that statute for the spouse of an active-duty member accompanying the member to an Arizona duty station. One origin state is named in the Registrar's out-of-state paperwork, and it is a scope question rather than an advantage: Form RC-L-200G tells California applicants that "Arizona's Engineering classifications may differ in scope from California's" and asks anyone applying for the Arizona A General Engineering license to email a scope letter to [email protected] describing the work they will perform in Arizona before submitting the application. That instruction concerns the A engineering classification rather than the B-1 or B-2 building classifications, and it waives nothing. Separately, A.A.C. R4-9-106(F) lets the Registrar waive the experience requirement in whole or in part on the strength of an appropriate trade examination passed within the past two years or a valid nationally recognized certification. The Registrar publishes no processing time for application review or approval; ask at [email protected], 602-542-1525 or 877-692-9762.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must have passed a licensing exam in New York that the destination considers comparable.The Registrar's licensing-fees page names "KB-1/B-1 Commercial or Dual Building Contractor and KB-2/B-2 Small commercial or Dual Residential and Small Commercial", and its License Classification Requirements page adds that "A Qualifying Party who has already taken the NASCLA exams for the B1, B2, CR-11 and C and R 11 Electrical may submit those scores with their applications", so an existing NASCLA pass travels with you. The NASCLA exam is an exam credential rather than a license or an agreement between states: anyone may sit it in any participating jurisdiction, and holding a license in a NASCLA state is not itself an Arizona advantage. It waives nothing else, including the Arizona Statutes and Rules Exam, the four years of experience, the bond, the background checks or any fee. You must buy a transcript from NASCLA so the Registrar can view your result.
- Alternatively: you are currently, or have been within the preceding five years, the qualifying party for a licensed contractor in another state in the same classification or in a classification the Registrar finds comparable to the Arizona B-1 or B-2 classification.A.A.C. R4-9-106(E)(1)(b). The Registrar's applying page states the same test as having "held a comparable license in another state within the past 5 years of the application date". Comparability is decided by the Registrar; there is no published list of equivalent out-of-state classifications and no pre-approval, so the decision is made when the completed application is reviewed. The verification is done by the issuing agency on Form RC-L-200G, which asks it for your current license status, the date you were first named on the license, the number of years of experience it can verify, the exams you took and the name and date of the passing exam, under the agency's state seal.
- Your New York license must have been obtained by examination, not by reciprocity or grandfathering.
- Four years of practical or management trade experience in commercial building construction, at least two of them within the last ten years. Accredited college, university or manufacturer training may substitute for up to two of the four years. Experience earned in other states counts.A.R.S. 32-1122(E)(1) and the Registrar's License Classification Requirements, which set four years for the B-1, B-2, KB-1 and KB-2 classifications and state that the years "must be hands-on and/or managerial experience". A.A.C. R4-9-119 requires the Registrar to accept military service or training, diplomas or transcripts from accredited training programs, and completion certificates from an apprenticeship approved by the US Department of Labor or a state apprenticeship agency, and to accept experience regardless of whether you were licensed or working for a licensed entity at the time. The Registrar may also reduce the four-year requirement where custom and usage in the craft shows it to be excessive, and under A.A.C. R4-9-106(F) may waive experience in whole or in part on the strength of a trade exam passed within the past two years or a valid nationally recognized certification. Form RC-L-200G can waive the experience requirement as well as the exam when the out-of-state agency verifies your years.
- You must have no disciplinary action or unresolved complaints on your record.A.R.S. 32-1122(C) and (D). The Registrar may find the circumstances behind a denial, refusal or revocation excusable if your actions did not result in an unremedied hardship, danger or loss to the public. Prior-license, felony and unlicensed-activity disclosure forms go in with the application where they apply.
What you'll do to get licensed in Arizona
- 1Law / code exam. Pass a law, rules, or code exam. Arizona Statutes and Rules Training Course and Exam (SRE), a computer-based open-book course and exam offered only online through Gmetrix. It covers the building, safety, health and lien laws of the state, the administrative principles of the contracting business and the Registrar's rules, and a grade of at least 70 percent is required. It cannot be waived unless the qualifying party has been the qualifying party on an Arizona contractor's license within the past five years, so an out-of-state applicant always takes it, whether or not the trade exam is waived..
- 2Exam fee. Pay the exam fee ($61). Examination fee for the online Arizona Statutes and Rules Training Course and Exam, paid directly to Gmetrix..
- 3Trade exam. Pass the destination's trade exam (if applicable). Trade exam for the commercial and dual general building classifications. You may satisfy it in one of three ways: pass the NASCLA Accredited Examination for Commercial General Building Contractors, pass the AZ ROC general commercial exam through PSI Services, or obtain an out-of-state waiver on Form RC-L-200G. A passing grade of at least 70 percent is required and an Arizona exam must have been taken not more than two years before you apply. The Registrar has combined the B-1, B-2, KB-1 and KB-2 exams into a single exam, so one sitting covers whichever of those four classifications you apply for. After a failure you wait 30 days to retake, and 90 days after a third or later failure..
- 4Exam fee. Pay the exam fee ($66) (if applicable). Examination fee for the AZ ROC trade-specific exam, taken either online or at a testing center, paid directly to PSI. Payable only if you sit the Arizona trade exam rather than using the NASCLA exam or obtaining a waiver..
- 5Exam fee. Pay the exam fee ($106) (if applicable). Examination fee for the NASCLA Commercial General Building exam, paid to PSI Exams Online, if you take the NASCLA route instead of the AZ ROC trade exam. A separate NASCLA transcript purchase is also payable directly to NASCLA online and is required before the Registrar can view your result; the Registrar's applying page and its licensing-fees page give different amounts for that second charge, so confirm the current figure with NASCLA or ask the Registrar at [email protected] before you pay..
- 6Application fee. Pay the application fee ($200). Application fee for a General Commercial classification (A, B-1, B-2) or a General Dual classification (KA, KB-1, KB-2). The Registrar waives the initial application fee for a first-time sole proprietor applicant who is the spouse of an active-duty service member, or a veteran discharged not more than two years before the application date; residential and dual applicants still pay the Residential Recovery Fund assessment..
- 7License fee. Pay the license or certificate fee ($580). License fee for a General Commercial classification, making $780 in total with the application fee; there is no recovery fund assessment on a commercial-only license. A General Dual license (KA, KB-1, KB-2) costs $480 in license fee plus a $370 Residential Recovery Fund assessment, or $1,050 in total, because it carries residential scope. Renewal is $580 for General Commercial and $480 plus a $270 recovery fund assessment, or $750, for General Dual..
- 8Surety bond. Post a surety bond ($5,000). Contractor's license bond on the Registrar's bond form, sized by classification and by the gross volume of work you expect to do in Arizona. For Class A and B general commercial building contractors the bands are $5,000 for $150,000 or less, $15,000 for more than $150,000 up to $500,000, $25,000 for more than $500,000 up to one million, $50,000 for more than one million up to five million, $75,000 for more than five million up to ten million, and $100,000 over ten million. A dual license such as KB-1 or KB-2 combines the commercial amount with the residential amount ($9,000 under $750,000 of residential volume, $15,000 at or above it) and the penal sum must be split on the bond between the two figures. A surety bond, cash, or a certificate of deposit from a bank operating in Arizona is accepted. The effective date cannot be in the future and must be within six months of submission, and the bond company's seal and a notarized attorney-in-fact signature are required..
- 9Other. Residential Recovery Fund assessment. It is not charged on a commercial-only B-1 or B-2 license, but every applicant for a dual classification such as KB-1 or KB-2 pays it, even if a license fee waiver is approved. The alternative to the assessment is posting a surety or cash bond of $200,000 to the license. ($370) (if applicable).
- 10Insurance. Carry the required insurance. Attestation that you have complied with the statutes and rules governing workers' compensation insurance. If the business is required to carry workers' compensation under Arizona law, the attestation must give the policy number or be accompanied by proof of self-insurance..
- 11Background check. Complete a background check. A background check for every person named on the license application, obtained through the Registrar's background check vendor. A completed check expires 90 days from its completion date. Anyone who has had an international address must submit an international and domestic check and list every foreign and domestic address where they have lived..
- 12Business license. Obtain a business license. Entity registration. A limited liability company or corporation must be registered with the Arizona Corporation Commission and in good standing with it before the license application is submitted, and must stay in good standing to renew. A partnership registers with the Arizona Secretary of State. A sole proprietorship needs no entity filing. You may only contract and advertise under the entity name the Registrar has licensed, so any trade name you want to use must be entered on the application as a DBA; filing the trade name with the Secretary of State is recommended but not required..
- 13Other. A legible copy of a government-issued photo identification, such as a valid driver's license or passport, for every individual named in the Persons section of the license application. Applications are filed through the ROC Online Customer Portal, or mailed to Registrar of Contractors, P.O. Box 6748, Phoenix, AZ 85005-6748, or delivered to 1700 W. Washington Street, Suite 105, Phoenix, AZ 85007-2812..
Published fees on this path total $841, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Exam fee · $61
- Trade exam · if applicable
- Exam fee · $66 · if applicable
- Exam fee · $106 · if applicable
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $5,000
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Arizona licenses general contractors
Arizona general contractor · “B-1 General Commercial Contractor; B-2 General Small Commercial; KB-1 or KB-2 dual”
Statewide license
Issued by Arizona Registrar of Contractors (AZ ROC)
Arizona's unlimited general building license is the B-1 General Commercial Contractor classification, issued statewide by the Registrar of Contractors (AZ ROC). It allows the licensee to construct, alter and repair any structure built for the support, shelter and enclosure of persons, animals or movable property, including the management and direct or indirect supervision of the work; electrical, plumbing, air conditioning, boiler, swimming pool, spa and water well work must be subcontracted to an appropriately licensed contractor. B-2 General Small Commercial Contractor is the same commercial scope capped at projects of $2,000,000 or less including labor and materials. Neither commercial classification covers residential work: the Registrar separates its markets by prefix, with B-1 and B-2 commercial general building, plain B residential general building, C- and R- commercial and residential specialty trades, CR- specialty dual, and K codes general dual. To hold both sides on one license you take a dual classification: KB-1 Dual Building Contractor covers the B-1 and B scopes together, and KB-2 Dual Residential and Small Commercial covers the B-2 and B scopes together. The license is held by a business, not by a person: it may be issued to a sole proprietorship, partnership, limited liability company or corporation, and the Registrar states that "the license belongs to the business and not to the qualifying party." The reader of this page is the qualifying party, the regularly employed person who supplies the four years of experience and passes the exams on the business's behalf.
Why New York has nothing to transfer
New York general contractor · “General Contractor Registration (NYC) / General Contractor and Light Commercial Contractor license (Buffalo)”
Licensed by cities and counties
Issued by New York City and city building departments (no statewide general or building contractor license)
New York has no statewide general, commercial, building or unlimited contractor license, and no state board examines or qualifies builders. The Department of State's Division of Licensing Services regulates 35 occupations and none of them is contractor; what the state does license around construction is narrow and specialized — home inspectors, manufactured housing, security and fire alarm installers through the Department of State, and asbestos contractors through the Department of Labor — while the individual building trades are licensed locally rather than by the state. Commercial and new-building work is controlled through the building permit, city by city. New York City requires a General Contractor Registration from the Department of Buildings before a contractor can pull New Building permits for one-, two- and three-family homes, and a registered Construction Superintendent at new buildings and demolitions nine stories and below; Buffalo issues graded General Contractor, New Housing, Light Commercial and Demolition licenses through a monthly advisory board. Most county home improvement laws stop short of this tier on purpose — Suffolk's and Westchester's both exclude new home construction — so outside the cities that license, a commercial builder in New York works under the permit and the Uniform Code with no contractor credential at all. A general contractor arriving from another state has nothing to transfer at state level and no reciprocity to apply for: the work is registering where registration is required and making sure the electrical, plumbing and fire-protection scopes are performed by people holding the right local trade licenses.
How local licensing works in New York
How it works in New York. No New York agency issues a general, commercial, building or unlimited contractor license. There is no state qualifying party, no business-and-law exam, no financial statement filed with a state board and no NASCLA route, because there is no board to file with. That means an out-of-state general contractor's license, its classification and any NASCLA Accredited Examination score carry no weight at state level. What decides whether you can work is the jurisdiction: a registration in New York City, a graded license in Buffalo, a county home improvement license where the job is a renovation rather than a new building, and the correct local trade licenses for the subcontracted scopes everywhere.
New York City — General Contractor Registration. The Department of Buildings requires that "all contractors who build one-, two-, and three-family homes must register with the Department to obtain New Building permits." Registration is $300, renewal $240, late renewal $50, and the term is three years. The applicant must "be at least eighteen (18) years old", "be able to read and write the English language", show good moral character, pass a background investigation and prove financial solvency — the last of which means a company bank account with "a minimum end balance of at least $25,000 for the past three (3) months", evidenced by three consecutive statements. Insurance is general liability with a $1 million minimum, plus workers' compensation and disability certificates. The filing is a notarized LIC6 form with EIN documentation, government photo ID, a Child Support Certification Form and proof of business address, submitted through DOB NOW; paper applications have not been accepted since September 7, 2021. There is no exam and no published experience minimum.
New York City — larger and commercial work. For buildings above the one-to-three-family tier, New York City does not license the general contractor at all; it regulates the site. "A registered Construction Superintendent is required at new buildings and buildings under demolition nine stories and below" — registration $100, renewal $50, term three years, applied for in DOB NOW after a DOB-approved training course. Bigger jobs are governed by site safety requirements and by DOB's other licenses and registrations: electricians, master and journeyman plumbers and fire suppression piping contractors, riggers, sign hangers, hoisting machine operators, welders, concrete safety managers and concrete testing laboratories, site safety professionals and special inspection agencies. Qualifications for all of them are in Chapter 4 of the 2022 NYC Administrative Code. Separately, any work on residential property in the five boroughs still needs the DCWP Home Improvement Contractor license — see the residential level, because in practice most contractors working in New York City need that one first.
Buffalo. Buffalo is the New York city that most closely resembles a classic graded contractor license. Under Chapter 144 of the City Ordinances, anyone "doing construction work in the City of Buffalo" needs a city Contractor License, which "does not allow for plumbing, heating, cooling or electrical work", and working without one is an unclassified misdemeanor carrying up to $1,000 or 60 days. At this tier the categories are General Contractor — "Companies with extensive experience in major construction work will qualify. To perform construction of new residential and commercial structures without limitations", including infrastructure — New Housing Contractor (new residential and commercial structures up to three stories plus remodeling, excluding infrastructure), Light Commercial Contractor (repairs, remodeling, alterations, conversions and modernization of commercial property, plus additions and new accessory structures up to three stories), Construction Manager (oversight and scheduling only, cannot perform construction work) and Demolition Grades 1 through 4. Minimum general liability aggregates are $2,000,000 for General Contractor and every demolition grade, $500,000 for Light Commercial, Specialty, Subcontractor and New Housing, and $50,000 for Handyman and Construction Manager, with the Office of Licenses at 301 City Hall as certificate holder and no PO Box addresses accepted. Demolition Grades 2 and 3 need reference letters from two townships where demolition work was performed, waivable with a resume showing ten years of demolition experience; Grade 4 needs a New York State explosives license held by a major corporate officer. New Housing applicants file copies of the warranties given to new home buyers. Asbestos abatement requires the firm's New York State Department of Labor Asbestos License, lead abatement requires EPA firm certification, and fire suppression system installation requires approval from the Chief of Fire Prevention. Applications must arrive at least seven days before the monthly Construction & Home Improvement Advisory Board meeting, and "attendance at the meeting is mandatory for the applicant" unless a notarized letter authorizes a representative. The fee is not printed on the application packet; ask the Office of Licenses on (716) 851-6583.
The counties stop below this tier. Nassau, Suffolk, Westchester, Rockland and Putnam license home improvement, not building. Suffolk's Chapter 563 definition expressly excludes "the construction of a new home", and the Westchester law states that it "shall not apply to ... the construction of a new home building", along with plumbing work, electrical work and architectural services. A builder putting up new houses in those counties may therefore need no county license at all, while the same builder's remodeling arm does — and both still answer to the town or village building department. Check the scope with the county before assuming either way.
Yonkers and Rochester. Yonkers licenses home improvement contractors who "renovate existing dwellings of 1 to 3 families" and does not issue a commercial builder license; new and commercial construction is handled through the Department of Housing and Buildings permit process. Rochester licenses only electricians, plumbers and stationary engineers / refrigeration operators, and holds the permit applicant responsible for making sure "all required contractors are licensed, proof of insurance is filed and the project complies with the permit".
Everywhere else. Outside the jurisdictions above, commercial construction in New York is governed by the Uniform Code and the local building department, and in most towns and villages a general contractor needs no license — only permits, insurance and licensed trades. Confirm with the building department for the job site, and where the project involves residential property anywhere in the state, General Business Law Article 36-A's written-contract and deposit-escrow rules still apply.
- New York City (Department of Buildings — General Contractor Registration for 1-, 2- and 3-family New Building permits)
- New York City (Department of Buildings — Construction Superintendent registration, nine stories and below)
- Buffalo (Office of Licenses — General Contractor, New Housing, Light Commercial, Construction Manager and Demolition licenses)
- Suffolk County (home improvement license excludes the construction of a new home)
- Westchester County (home improvement license does not apply to the construction of a new home building)
- Yonkers (Consumer Protection Bureau licenses 1-3 family renovation only; no commercial builder license)
- Rochester (Licensed Trades — electrical, plumbing and SE/RO only; no builder license)
Common questions
- Do I have to take the Arizona general contractor exam if I'm licensed in New York?
- The trade exam is waived, but Arizona requires a law or code exam.
- What does it cost to get a Arizona general contractor license from New York?
- Published fees on this path total $841, not counting exam vendor fees or bonds.
- Do my New York work hours count in Arizona?
- Yes. Documented out-of-state experience counts toward Arizona's eligibility requirements.
- Does it work the other way, from Arizona to New York?
- Not necessarily. Reciprocity is directed. Going from Arizona to New York, the mechanism is not applicable.
Sources
- Arizona Administrative Code Title 4, Chapter 9 - Registrar of Contractors (R4-9-106 Examinations; R4-9-119 Minimum Trade Experience) · A.A.C. R4-9-106(C)-(F); R4-9-119 · Arizona Secretary of State · Admin Rule · verified September 17, 2026
- A.R.S. 32-1122 - Qualifications for license (qualifying party experience, examination, bond, workers' compensation attestation) · A.R.S. 32-1122(B)-(F) · Arizona State Legislature · Statute · verified September 17, 2026
- A.R.S. 32-4302 - Out-of-state applicants; residents; military spouses; licensure; certification; exceptions; notice · A.R.S. 32-4302(A)-(C), (G) · Arizona State Legislature · Statute · verified September 17, 2026
- Arizona Registrar of Contractors - Applying for a License (qualifying party, examinations, NASCLA, out-of-state applicants, trade-exam waiver) · A.A.C. R4-9-106(E); A.R.S. 32-1122(E) · Arizona Registrar of Contractors · Agency Page · verified September 17, 2026
- Arizona Registrar of Contractors - Bond Information (license bond amounts by classification and contemplated gross volume) · Arizona Registrar of Contractors · Agency Page · verified September 17, 2026
- Arizona Registrar of Contractors - Instructions for License Bonds and bond schedules (Form RC-L-220/I, Rev. 02/23) · Arizona Registrar of Contractors · Form · verified September 17, 2026
- Arizona Registrar of Contractors - Applying for a License checklist (LLC or corporation applicants) · Arizona Registrar of Contractors · Form · verified September 17, 2026
- Arizona Registrar of Contractors - License Classification Requirements (note on submitting prior NASCLA scores) · Arizona Registrar of Contractors · Agency Page · verified September 17, 2026
- Arizona Registrar of Contractors - License Classification Requirements (minimum years of experience and exams by classification) · A.R.S. 32-1122(E) · Arizona Registrar of Contractors · Form · verified September 17, 2026
- Arizona Registrar of Contractors - License Classifications (B, B-1, B-2, B-3, KB-1, KB-2 general building scopes) · Arizona Registrar of Contractors · Agency Page · verified September 17, 2026
- Arizona Registrar of Contractors - License and Renewal Fees (general commercial, general residential and general dual) · A.R.S. 32-1152 · Arizona Registrar of Contractors · Agency Page · verified September 17, 2026
- Arizona Registrar of Contractors - Service Members and Veterans (licensure without examination, fee waiver, military experience) · A.R.S. 32-4301, 32-4302, 32-4303; A.A.C. R4-9-119 · Arizona Registrar of Contractors · Agency Page · verified September 17, 2026
- Arizona Registrar of Contractors - Out-of-State Waiver Request Form (Form RC-L-200G, Rev. 02/23) · A.R.S. 32-1122(A)(4), 32-1122(E)(1), 32-4302; A.A.C. R4-9-106, R4-9-119 · Arizona Registrar of Contractors · Form · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.