LicensebyState

New York to Massachusetts: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 9 sources

New York does not issue a statewide general contractor license, so there is nothing to transfer. Here is Massachusetts's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Unrestricted CSL by examination (all states; no license recognition and no NASCLA route)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

An out-of-state general or building contractor sits the Massachusetts Unrestricted Construction Supervisor examination like any other candidate. The Board states that Massachusetts does not recognize out-of-state contractor licenses; 780 CMR 110.R5 and the candidate handbook contain no reciprocity, endorsement or examination-waiver provision, and Massachusetts is not among the jurisdictions that accept the NASCLA Accredited Examination for Commercial General Building Contractors, so a NASCLA certificate does not replace the Massachusetts examination either. Out-of-state work does count toward eligibility: the applicant must show three years, 36 months of full-time work, in building construction or design within the past ten years, proved by W-2, Schedule C or 1099 forms or by a letter of attestation from an engineer, architect, employer, military supervisor or licensed contractor, with a vocational program or bachelor's degree worth one year and a degree in architecture, engineering, science or a related technology field worth two, up to two years in total. The applicant registers with PSI, pays a $23 application fee and a $65 examination fee, and sits a 75-question open-book examination on the Massachusetts State Building Code: 180 minutes, 70% to pass, results given immediately, unlimited retakes. A passing candidate mails the score report and the $150 license fee to the Division of Occupational Licensure and receives the license card in about 30 days.

Massachusetts has no separate business-and-law examination. Massachusetts administrative responsibilities under 780 CMR are five scored questions inside the Unrestricted examination itself, which also covers plan reading and estimating, general building construction, energy efficiency, accessibility, sitework and foundations, concrete and masonry, moisture protection, structural framing in steel and wood, roofing and exterior walls, associated trades, interior environment, fire protection and OSHA safety. The examination is open book against the 2021 International Building Code, the 2021 International Residential Code, the International Energy Conservation Code, the Massachusetts amendments and stretch codes, the Architectural Access Board regulations at 521 CMR and 29 CFR Part 1926; candidates bring their own copies. A first license runs three years and renews for two-year terms at $100, with 12 hours of continuing education per cycle. One examination-free route exists and it is a Massachusetts one, not an out-of-state one: 780 CMR 110.R5.2.1 lets a person holding a current Massachusetts building official certification under 780 CMR 110.R7 apply for an Unrestricted license without testing. A CSL is not required for swimming pools, signs or tents, for projects subject to construction control, for agricultural buildings closed to the public, or for work inside a state-licensed trade such as wiring, plumbing, gas fitting, fire protection, pipefitting, HVAC or refrigeration. A contractor who also works on existing owner-occupied homes of one to four units needs the separate Home Improvement Contractor registration described on the residential level of this page.

At a glance

Trade exam
Required
Law / code exam
Not required
Out-of-state hours
Count toward eligibility
Typical processing
About 30 days

What you must already have

  • You must document at least 3 years of qualifying work experience.The experience need not be continuous and need not have been gained in Massachusetts. Education substitutes for up to two of the three years: a three- or four-year vocational school program in building construction, or a bachelor's, master's or doctoral degree, counts as one year; a degree in architecture, science, engineering or a related technology field counts as two. Union affiliation alone is not accepted, and active military service relevant to construction may be counted.
  • At least 18 years old on the day of the examination, and of good moral character as determined by the Board of Building Regulations and Standards.
  • Has not already passed an examination in, or held a license in, the Unrestricted class. The exception is an applicant whose license has been expired for more than two years, or who has been ordered to re-examine after a hearing.
  • A notarized signature on the examination registration form confirming that the information given is true and that all Massachusetts state tax returns have been filed and state taxes paid.

What you'll do to get licensed in Massachusetts

  1. 1Trade exam. Pass the destination's trade exam. Massachusetts Unrestricted Construction Supervisor examination, administered by PSI: 75 questions, 180 minutes, 70% to pass (a cutscore of 53), open book, taken at a PSI center in Auburn, Charlestown, Fall River, Lawrence or West Springfield or at any PSI center elsewhere in the United States. Results are given immediately and there is no limit on retakes. PSI takes up to two weeks to review an examination application, and the approved application stays on file for two years..
  2. 2Application fee. Pay the application fee ($23). Non-refundable examination application fee paid to PSI when the registration form and the experience documentation are filed..
  3. 3Exam fee. Pay the exam fee ($65). Non-refundable examination fee paid to PSI when the examination is scheduled. An appointment can be moved without losing the fee if the notice reaches PSI two days before the test date..
  4. 4License fee. Pay the license or certificate fee ($150). Initial Unrestricted Construction Supervisor license fee, mailed with the passing score report to the Division of Occupational Licensure within one year of passing the examination (801 CMR 4.02(39)(a)). The first license runs three years; renewals are $100 for a two-year term, and a renewal filed more than one year but less than two years after expiry carries a $100 late fee. A license more than two years past expiry cannot be renewed and the examination must be taken again..
  5. 5Other. Documentation of the three years of experience filed with the examination application: W-2, IRS Schedule C or 1099 forms covering the equivalent of three years of full-time work, or, instead of tax records, a letter of attestation from an engineer, architect, employer, military supervisor or licensed contractor. Where education is used for part of the experience, a copy of the diploma or degree is filed as well..
  6. 6Continuing education. Complete continuing education. Renewal condition rather than an entry requirement: an Unrestricted construction supervisor completes 12 hours of Board-approved continuing education in each two-year renewal cycle, made up of four hours of code review and at least one hour each of workplace safety, business practices and workers' compensation, energy and, in the first renewal cycle only, lead safe practices, with the balance as approved electives. No more than six of the hours may be taken online; the rest must be classroom based. Courses should be finished at least 60 days before the license expires, and a certificate used for one renewal cannot be used again. A Specialty license carries six hours per cycle on the same pattern..
  7. 7Background check. Complete a background check. There is no fingerprint or criminal record check for the Construction Supervisor License itself, but under 780 CMR 110.R5.2.9.2 the Board may require an applicant or licensee to disclose any conviction, felony or misdemeanour, or any civil finding made against them by a court, by another state or federal agency, or by a licensing board in another jurisdiction, either at application or at the next renewal..
  8. 8Insurance. Carry the required insurance (if applicable). The Construction Supervisor License carries no surety bond, financial statement, net worth, working capital or general liability insurance requirement; 780 CMR 110.R5 sets none and the fee schedule collects only the application, examination and license fees. Workers' compensation obligations apply to the business independently of the license, and owners, lenders and general contractors commonly require liability coverage by contract..
  9. 9Other. On-site obligations that come with the license: the license holder must carry the license card at all times during construction work on any site and produce it if a building official asks; every building permit application must carry the supervisor's name, signature, license number and license category; and if that supervisor stops supervising the work, the work must stop until a successor license holder is substituted on the building department's records. The license holder is fully responsible for all work supervised, even when they are a subcontractor rather than the permit holder, and must notify the building official in writing of any violation discovered under the permit..

Published fees on this path total $238, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Exam fee · $65

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance · if applicable

How Massachusetts licenses general contractors

Massachusetts general contractor · “Construction Supervisor License, Unrestricted

Statewide license

Verified September 17, 2026· 6 sources

Issued by Board of Building Regulations and Standards (Massachusetts Division of Occupational Licensure, Office of Public Safety and Inspections)

The broadest contractor credential Massachusetts issues is the Unrestricted Construction Supervisor License (CSL), and it is not split residential against commercial the way most states split their general and residential tiers. The Unrestricted CSL covers construction, reconstruction, alteration, repair, removal and demolition of buildings of any use containing less than 35,000 cubic feet of enclosed space, together with one- and two-family dwellings of any size, agricultural buildings and retaining walls under ten feet, so it is the commercial and mixed-use tier as well as the homes tier. Above 35,000 cubic feet there is no contractor license to hold: the Board states that a registered design professional, an engineer or architect, controls the construction of larger buildings and 'a construction supervisor license is not required for larger projects since the RDP is considered the licensed person for the project'. There are also six Specialty CSL classes - masonry, roof covering, windows and siding, solid fuel-burning appliances, demolition and insulation - each carrying the same building-size scope within its own trade. Like the homes-only class, the Unrestricted CSL is held by a person rather than by a business: M.G.L. c. 143, § 94(i) has the Board issue licenses 'to individuals engaged as construction supervisors', so a contractor moving to Massachusetts applies in their own name rather than qualifying a company, and every building permit application names that individual and their license number. Massachusetts publishes no dollar limits and no classification tiers beyond these, and the Board states that 'Massachusetts does not recognize out of state contractor licenses'.

Moving to MassachusettsLeaving Massachusetts

Why New York has nothing to transfer

New York general contractor · “General Contractor Registration (NYC) / General Contractor and Light Commercial Contractor license (Buffalo)

Licensed by cities and counties

Verified September 17, 2026· 15 sources

Issued by New York City and city building departments (no statewide general or building contractor license)

New York has no statewide general, commercial, building or unlimited contractor license, and no state board examines or qualifies builders. The Department of State's Division of Licensing Services regulates 35 occupations and none of them is contractor; what the state does license around construction is narrow and specialized — home inspectors, manufactured housing, security and fire alarm installers through the Department of State, and asbestos contractors through the Department of Labor — while the individual building trades are licensed locally rather than by the state. Commercial and new-building work is controlled through the building permit, city by city. New York City requires a General Contractor Registration from the Department of Buildings before a contractor can pull New Building permits for one-, two- and three-family homes, and a registered Construction Superintendent at new buildings and demolitions nine stories and below; Buffalo issues graded General Contractor, New Housing, Light Commercial and Demolition licenses through a monthly advisory board. Most county home improvement laws stop short of this tier on purpose — Suffolk's and Westchester's both exclude new home construction — so outside the cities that license, a commercial builder in New York works under the permit and the Uniform Code with no contractor credential at all. A general contractor arriving from another state has nothing to transfer at state level and no reciprocity to apply for: the work is registering where registration is required and making sure the electrical, plumbing and fire-protection scopes are performed by people holding the right local trade licenses.

How local licensing works in New York

How it works in New York. No New York agency issues a general, commercial, building or unlimited contractor license. There is no state qualifying party, no business-and-law exam, no financial statement filed with a state board and no NASCLA route, because there is no board to file with. That means an out-of-state general contractor's license, its classification and any NASCLA Accredited Examination score carry no weight at state level. What decides whether you can work is the jurisdiction: a registration in New York City, a graded license in Buffalo, a county home improvement license where the job is a renovation rather than a new building, and the correct local trade licenses for the subcontracted scopes everywhere.

New York City — General Contractor Registration. The Department of Buildings requires that "all contractors who build one-, two-, and three-family homes must register with the Department to obtain New Building permits." Registration is $300, renewal $240, late renewal $50, and the term is three years. The applicant must "be at least eighteen (18) years old", "be able to read and write the English language", show good moral character, pass a background investigation and prove financial solvency — the last of which means a company bank account with "a minimum end balance of at least $25,000 for the past three (3) months", evidenced by three consecutive statements. Insurance is general liability with a $1 million minimum, plus workers' compensation and disability certificates. The filing is a notarized LIC6 form with EIN documentation, government photo ID, a Child Support Certification Form and proof of business address, submitted through DOB NOW; paper applications have not been accepted since September 7, 2021. There is no exam and no published experience minimum.

New York City — larger and commercial work. For buildings above the one-to-three-family tier, New York City does not license the general contractor at all; it regulates the site. "A registered Construction Superintendent is required at new buildings and buildings under demolition nine stories and below" — registration $100, renewal $50, term three years, applied for in DOB NOW after a DOB-approved training course. Bigger jobs are governed by site safety requirements and by DOB's other licenses and registrations: electricians, master and journeyman plumbers and fire suppression piping contractors, riggers, sign hangers, hoisting machine operators, welders, concrete safety managers and concrete testing laboratories, site safety professionals and special inspection agencies. Qualifications for all of them are in Chapter 4 of the 2022 NYC Administrative Code. Separately, any work on residential property in the five boroughs still needs the DCWP Home Improvement Contractor license — see the residential level, because in practice most contractors working in New York City need that one first.

Buffalo. Buffalo is the New York city that most closely resembles a classic graded contractor license. Under Chapter 144 of the City Ordinances, anyone "doing construction work in the City of Buffalo" needs a city Contractor License, which "does not allow for plumbing, heating, cooling or electrical work", and working without one is an unclassified misdemeanor carrying up to $1,000 or 60 days. At this tier the categories are General Contractor — "Companies with extensive experience in major construction work will qualify. To perform construction of new residential and commercial structures without limitations", including infrastructure — New Housing Contractor (new residential and commercial structures up to three stories plus remodeling, excluding infrastructure), Light Commercial Contractor (repairs, remodeling, alterations, conversions and modernization of commercial property, plus additions and new accessory structures up to three stories), Construction Manager (oversight and scheduling only, cannot perform construction work) and Demolition Grades 1 through 4. Minimum general liability aggregates are $2,000,000 for General Contractor and every demolition grade, $500,000 for Light Commercial, Specialty, Subcontractor and New Housing, and $50,000 for Handyman and Construction Manager, with the Office of Licenses at 301 City Hall as certificate holder and no PO Box addresses accepted. Demolition Grades 2 and 3 need reference letters from two townships where demolition work was performed, waivable with a resume showing ten years of demolition experience; Grade 4 needs a New York State explosives license held by a major corporate officer. New Housing applicants file copies of the warranties given to new home buyers. Asbestos abatement requires the firm's New York State Department of Labor Asbestos License, lead abatement requires EPA firm certification, and fire suppression system installation requires approval from the Chief of Fire Prevention. Applications must arrive at least seven days before the monthly Construction & Home Improvement Advisory Board meeting, and "attendance at the meeting is mandatory for the applicant" unless a notarized letter authorizes a representative. The fee is not printed on the application packet; ask the Office of Licenses on (716) 851-6583.

The counties stop below this tier. Nassau, Suffolk, Westchester, Rockland and Putnam license home improvement, not building. Suffolk's Chapter 563 definition expressly excludes "the construction of a new home", and the Westchester law states that it "shall not apply to ... the construction of a new home building", along with plumbing work, electrical work and architectural services. A builder putting up new houses in those counties may therefore need no county license at all, while the same builder's remodeling arm does — and both still answer to the town or village building department. Check the scope with the county before assuming either way.

Yonkers and Rochester. Yonkers licenses home improvement contractors who "renovate existing dwellings of 1 to 3 families" and does not issue a commercial builder license; new and commercial construction is handled through the Department of Housing and Buildings permit process. Rochester licenses only electricians, plumbers and stationary engineers / refrigeration operators, and holds the permit applicant responsible for making sure "all required contractors are licensed, proof of insurance is filed and the project complies with the permit".

Everywhere else. Outside the jurisdictions above, commercial construction in New York is governed by the Uniform Code and the local building department, and in most towns and villages a general contractor needs no license — only permits, insurance and licensed trades. Confirm with the building department for the job site, and where the project involves residential property anywhere in the state, General Business Law Article 36-A's written-contract and deposit-escrow rules still apply.

Moving to New YorkLeaving New York

Common questions

Do I have to take the Massachusetts general contractor exam if I'm licensed in New York?
Yes. Massachusetts requires the trade exam on this path.
What does it cost to get a Massachusetts general contractor license from New York?
Published fees on this path total $238, not counting exam vendor fees or bonds.
Do my New York work hours count in Massachusetts?
Yes. Documented out-of-state experience counts toward Massachusetts's eligibility requirements.
How long does the application take?
The board's published or typical processing time is about 30 days.
Does it work the other way, from Massachusetts to New York?
Not necessarily. Reciprocity is directed. Going from Massachusetts to New York, the mechanism is not applicable.

Sources

  1. 780 CMR 110.R5 - Licensing of Construction Supervisors (Tenth Edition, Massachusetts State Building Code) · 780 CMR 110.R5 · Massachusetts Board of Building Regulations and Standards · Admin Rule · verified September 17, 2026
  2. 801 CMR 4.02 - Fees for licenses, permits and services to be charged by state agencies (item 39, Construction Supervisor License) · 801 CMR 4.02(39) · Massachusetts Executive Office for Administration and Finance · Admin Rule · verified September 17, 2026
  3. Construction Supervisor Licensing Candidate Handbook (examination eligibility, fees and content outlines) · Massachusetts Division of Occupational Licensure / PSI Services LLC · Form · verified September 17, 2026
  4. Continuing education for construction supervisors · Massachusetts Division of Occupational Licensure, Board of Building Regulations and Standards · Agency Page · verified September 17, 2026
  5. Construction Supervisor Licensing - Board of Building Regulations and Standards · Massachusetts Division of Occupational Licensure, Board of Building Regulations and Standards · Agency Page · verified September 17, 2026
  6. Learn about different Construction Supervisor Licenses · Massachusetts Division of Occupational Licensure, Board of Building Regulations and Standards · Agency Page · verified September 17, 2026
  7. When is a Construction Supervisor License required? (includes the Board's out-of-state position) · Massachusetts Division of Occupational Licensure, Board of Building Regulations and Standards · Agency Page · verified September 17, 2026
  8. MGL Chapter 143, Section 94 - Board of Building Regulations and Standards; powers and duties · M.G.L. c. 143, § 94(a), (i), (m), (n) · Massachusetts General Court · Statute · verified September 17, 2026
  9. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related