New York to Mississippi: general contractor license reciprocity
New York does not issue a statewide general contractor license, so there is nothing to transfer. Here is Mississippi's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Building Construction license using the NASCLA Accredited Examination or the Universal Recognition of Occupational Licenses Act
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Mississippi accepts the NASCLA Accredited Examination for Commercial General Building Contractors in place of its own Building Construction trade examination, so an out-of-state contractor from any state can avoid the Mississippi-specific trade test. The board's classifications page marks Building Construction "(Trade or NASCLA accredited exam accepted)", its commercial application tells applicants for that major classification that they "may choose to take the Mississippi state exam or the NASCLA national accredited exam", and the PSI candidate bulletin carries both side by side: the Mississippi Building Construction examination is 80 questions in 3 hours at 70% to pass, the NASCLA examination 115 questions in 330 minutes with a minimum score of 81. Separately, an individual who establishes residency in Mississippi and holds a current license of similar scope in another state, held for at least one year, may file Form UROL with the application under the Universal Recognition of Occupational Licenses Act (Miss. Code Ann. 73-50-2) and have the trade examination waived outright; the same form covers an applicant who worked in a similar scope of practice for at least three years in a state that does not regulate construction at state level. Neither route touches the Mississippi Law and Business Management examination, the $400 application fee, the CPA-reviewed financial statement, the insurance certificate or the board's review of the application. An applicant who uses neither route simply sits the Mississippi Building Construction examination.
The NASCLA examination is booked through PSI on the Mississippi eligibility like any other portion, and passing candidates can release their transcript to other jurisdictions through NASCLA's National Examination Database. It is an exam credential rather than a license, and Mississippi does not carry it across to the residential level. Board Rule Part 802 Ch. 1, R. 1.1(2)(o) separately lets the Executive Director adopt as the required standardized examination any comparable examination passed by an applicant who holds a license in good standing in a comparable classification in a recognized reciprocity state, which is the authority behind the named-state agreements listed on this page. Once the file is complete the board reviews applications weekly, submitting them on Fridays and issuing approved licenses the following Wednesday, so the seven working days shown is board review time and not the whole process, and an application left incomplete for 180 days is destroyed. Eligibility to test lasts six months with unlimited retakes inside that window. Ask a licensing agent at (601) 354-6161 or (800) 880-6161 which examinations you owe before registering with PSI.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
- Typical processing
- About 7 days
What you must already have
- You must have passed a licensing exam in New York that the destination considers comparable.The examination is 115 questions over 330 minutes with a minimum passing score of 81, and it is origin-independent: any candidate may sit it, and holding a license in another NASCLA state is not what makes it count. Mississippi names it on its classifications page, its reciprocity page, its FAQ, its Testing page and in the commercial application, and the PSI bulletin lets a Mississippi candidate elect it instead of the state-specific exam. It does not waive the Mississippi Law and Business Management examination. Mississippi accepts it for Building Construction and, in the electrical trade, accepts the NASCLA Accredited Electrical Examination for Master Electrical; it accepts no NASCLA examination for any residential classification.
- The qualifying party must be an owner, officer or responsible managing employee who is genuinely employed by the applicant, actively engaged in the licensed work and able to supervise or perform it, and may qualify no more than three companies without the board's permission. Mississippi sets no minimum apprenticeship or trade hours for a commercial certificate.
- Your New York license must be active and in good standing.The alternative on Form UROL is three years of work in a similar scope of practice in a state that does not regulate construction at state level, supported by references naming three completed jobs.
- You must have held your New York license for at least 1 year.Universal Recognition route only: Form UROL requires the out-of-state license to have been held for at least one year.
- Universal Recognition route only: proof of Mississippi residency, by state identification card, a current Mississippi residential utility bill, ownership or lease of a Mississippi residence, documentation of in-state employment or a notarized promise of employment for the applicant or spouse, or other verifiable documentation.The board's 2026 application packets state that the Act applies to individuals who establish residence in Mississippi after July 1, 2021, and that filing the form does not by itself guarantee licensure.
What you'll do to get licensed in Mississippi
- 1Law / code exam. Pass a law, rules, or code exam. Mississippi Law and Business Management examination through PSI: 50 questions, 2 hours, 70% to pass, open book. Every applicant for a Mississippi contractor license takes it, and no exam waiver agreement, NASCLA credential or universal-recognition waiver removes it..
- 2Trade exam. Pass the destination's trade exam. Mississippi Building Construction examination through PSI: 80 questions, 3 hours, 70% to pass, open book. An applicant may instead sit the NASCLA Accredited Examination for Commercial General Building Contractors, which Mississippi accepts for this classification..
- 3Application fee. Pay the application fee ($400). Commercial application fee of $400, which includes one trade classification. Each additional classification requested costs a further $100. Fees are not refundable and must be paid by check or money order. The annual renewal fee is also $400..
- 4Exam fee. Pay the exam fee ($120). PSI registration fee: $120 for one examination portion, $240 for two. The fee is charged for each registration, whether the examination is a first attempt or a repeat, and is not refundable or transferable..
- 5Financial responsibility. Show financial responsibility of at least $50,000. Reviewed or audited financial statement prepared and signed by a certified public accountant within the last twelve months, showing a net worth of at least $50,000 for a major classification such as Building Construction, or at least $20,000 for a specialty classification. A compilation is not accepted and the board states the requirement cannot be waived or substituted; there is no bond alternative, because Mississippi issues only an unlimited commercial license rather than monetary limitation tiers. The figure shown is the major-classification minimum..
- 6Insurance. Carry the required insurance. Certificate of general liability insurance showing at least $300,000 per occurrence and $600,000 aggregate, with the Mississippi State Board of Contractors named as certificate holder so it is notified if coverage is cancelled. The name insured must match the name the license is issued in. A workers compensation certificate is also required if the applicant has five or more employees..
- 7Business license. Obtain a business license. The certificate of responsibility is issued to a legal entity, so a corporation, LLC, LLP or limited partnership must be registered with the Mississippi Secretary of State and show proof of good standing before the license issues, and a company domiciled outside Mississippi must first qualify to do business in the State. Commercial applicants must also supply a Mississippi sales tax or use tax number and a Mississippi income tax or federal tax identification number..
- 8Other. Three reference letters, one of which must come from the applicant's bank or financial institution; a list of at least three completed jobs in the classification being applied for, which may be work done outside Mississippi; and proof that the qualifying party is employed by the applicant, by check stub, W-2 or a Secretary of State officer listing..
Published fees on this path total $520, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam
- Exam fee · $120
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Mississippi licenses general contractors
Mississippi general contractor · “Certificate of Responsibility, Building Construction classification”
Statewide license
Issued by Mississippi State Board of Contractors (MSBOC)
Mississippi's unlimited tier is the Certificate of Responsibility issued by the Mississippi State Board of Contractors in the Building Construction major classification. A commercial license is required of every contractor and subcontractor of any tier on a public or private project of $50,000 or more (Miss. Code Ann. 31-3-1), and Building Construction covers the construction of commercial buildings and single- or multiple-dwelling residential structures, together with additions, alterations, conversions, expansions, reconstruction, renovations and the associated landscaping, earthwork, parking areas, driveways and sidewalks. Holding the major classification entitles the licensee to perform every specialty classification listed beneath it; one classification is included in the application fee and each further one costs $100. The board states that it offers only an unlimited license, so there are no monetary limitation bands: instead every commercial applicant proves financial responsibility with a CPA-reviewed or audited statement showing a net worth of at least $50,000 for a major classification, or $20,000 for a specialty, with no bond substitute. The certificate belongs to the business and is qualified by a named person - an owner, officer or responsible managing employee who takes the examinations, must be genuinely employed by the certificate holder, and may qualify no more than three companies at once - so a contractor moving to Mississippi applies as or for the entity that will bid the work.
Why New York has nothing to transfer
New York general contractor · “General Contractor Registration (NYC) / General Contractor and Light Commercial Contractor license (Buffalo)”
Licensed by cities and counties
Issued by New York City and city building departments (no statewide general or building contractor license)
New York has no statewide general, commercial, building or unlimited contractor license, and no state board examines or qualifies builders. The Department of State's Division of Licensing Services regulates 35 occupations and none of them is contractor; what the state does license around construction is narrow and specialized — home inspectors, manufactured housing, security and fire alarm installers through the Department of State, and asbestos contractors through the Department of Labor — while the individual building trades are licensed locally rather than by the state. Commercial and new-building work is controlled through the building permit, city by city. New York City requires a General Contractor Registration from the Department of Buildings before a contractor can pull New Building permits for one-, two- and three-family homes, and a registered Construction Superintendent at new buildings and demolitions nine stories and below; Buffalo issues graded General Contractor, New Housing, Light Commercial and Demolition licenses through a monthly advisory board. Most county home improvement laws stop short of this tier on purpose — Suffolk's and Westchester's both exclude new home construction — so outside the cities that license, a commercial builder in New York works under the permit and the Uniform Code with no contractor credential at all. A general contractor arriving from another state has nothing to transfer at state level and no reciprocity to apply for: the work is registering where registration is required and making sure the electrical, plumbing and fire-protection scopes are performed by people holding the right local trade licenses.
How local licensing works in New York
How it works in New York. No New York agency issues a general, commercial, building or unlimited contractor license. There is no state qualifying party, no business-and-law exam, no financial statement filed with a state board and no NASCLA route, because there is no board to file with. That means an out-of-state general contractor's license, its classification and any NASCLA Accredited Examination score carry no weight at state level. What decides whether you can work is the jurisdiction: a registration in New York City, a graded license in Buffalo, a county home improvement license where the job is a renovation rather than a new building, and the correct local trade licenses for the subcontracted scopes everywhere.
New York City — General Contractor Registration. The Department of Buildings requires that "all contractors who build one-, two-, and three-family homes must register with the Department to obtain New Building permits." Registration is $300, renewal $240, late renewal $50, and the term is three years. The applicant must "be at least eighteen (18) years old", "be able to read and write the English language", show good moral character, pass a background investigation and prove financial solvency — the last of which means a company bank account with "a minimum end balance of at least $25,000 for the past three (3) months", evidenced by three consecutive statements. Insurance is general liability with a $1 million minimum, plus workers' compensation and disability certificates. The filing is a notarized LIC6 form with EIN documentation, government photo ID, a Child Support Certification Form and proof of business address, submitted through DOB NOW; paper applications have not been accepted since September 7, 2021. There is no exam and no published experience minimum.
New York City — larger and commercial work. For buildings above the one-to-three-family tier, New York City does not license the general contractor at all; it regulates the site. "A registered Construction Superintendent is required at new buildings and buildings under demolition nine stories and below" — registration $100, renewal $50, term three years, applied for in DOB NOW after a DOB-approved training course. Bigger jobs are governed by site safety requirements and by DOB's other licenses and registrations: electricians, master and journeyman plumbers and fire suppression piping contractors, riggers, sign hangers, hoisting machine operators, welders, concrete safety managers and concrete testing laboratories, site safety professionals and special inspection agencies. Qualifications for all of them are in Chapter 4 of the 2022 NYC Administrative Code. Separately, any work on residential property in the five boroughs still needs the DCWP Home Improvement Contractor license — see the residential level, because in practice most contractors working in New York City need that one first.
Buffalo. Buffalo is the New York city that most closely resembles a classic graded contractor license. Under Chapter 144 of the City Ordinances, anyone "doing construction work in the City of Buffalo" needs a city Contractor License, which "does not allow for plumbing, heating, cooling or electrical work", and working without one is an unclassified misdemeanor carrying up to $1,000 or 60 days. At this tier the categories are General Contractor — "Companies with extensive experience in major construction work will qualify. To perform construction of new residential and commercial structures without limitations", including infrastructure — New Housing Contractor (new residential and commercial structures up to three stories plus remodeling, excluding infrastructure), Light Commercial Contractor (repairs, remodeling, alterations, conversions and modernization of commercial property, plus additions and new accessory structures up to three stories), Construction Manager (oversight and scheduling only, cannot perform construction work) and Demolition Grades 1 through 4. Minimum general liability aggregates are $2,000,000 for General Contractor and every demolition grade, $500,000 for Light Commercial, Specialty, Subcontractor and New Housing, and $50,000 for Handyman and Construction Manager, with the Office of Licenses at 301 City Hall as certificate holder and no PO Box addresses accepted. Demolition Grades 2 and 3 need reference letters from two townships where demolition work was performed, waivable with a resume showing ten years of demolition experience; Grade 4 needs a New York State explosives license held by a major corporate officer. New Housing applicants file copies of the warranties given to new home buyers. Asbestos abatement requires the firm's New York State Department of Labor Asbestos License, lead abatement requires EPA firm certification, and fire suppression system installation requires approval from the Chief of Fire Prevention. Applications must arrive at least seven days before the monthly Construction & Home Improvement Advisory Board meeting, and "attendance at the meeting is mandatory for the applicant" unless a notarized letter authorizes a representative. The fee is not printed on the application packet; ask the Office of Licenses on (716) 851-6583.
The counties stop below this tier. Nassau, Suffolk, Westchester, Rockland and Putnam license home improvement, not building. Suffolk's Chapter 563 definition expressly excludes "the construction of a new home", and the Westchester law states that it "shall not apply to ... the construction of a new home building", along with plumbing work, electrical work and architectural services. A builder putting up new houses in those counties may therefore need no county license at all, while the same builder's remodeling arm does — and both still answer to the town or village building department. Check the scope with the county before assuming either way.
Yonkers and Rochester. Yonkers licenses home improvement contractors who "renovate existing dwellings of 1 to 3 families" and does not issue a commercial builder license; new and commercial construction is handled through the Department of Housing and Buildings permit process. Rochester licenses only electricians, plumbers and stationary engineers / refrigeration operators, and holds the permit applicant responsible for making sure "all required contractors are licensed, proof of insurance is filed and the project complies with the permit".
Everywhere else. Outside the jurisdictions above, commercial construction in New York is governed by the Uniform Code and the local building department, and in most towns and villages a general contractor needs no license — only permits, insurance and licensed trades. Confirm with the building department for the job site, and where the project involves residential property anywhere in the state, General Business Law Article 36-A's written-contract and deposit-escrow rules still apply.
- New York City (Department of Buildings — General Contractor Registration for 1-, 2- and 3-family New Building permits)
- New York City (Department of Buildings — Construction Superintendent registration, nine stories and below)
- Buffalo (Office of Licenses — General Contractor, New Housing, Light Commercial, Construction Manager and Demolition licenses)
- Suffolk County (home improvement license excludes the construction of a new home)
- Westchester County (home improvement license does not apply to the construction of a new home building)
- Yonkers (Consumer Protection Bureau licenses 1-3 family renovation only; no commercial builder license)
- Rochester (Licensed Trades — electrical, plumbing and SE/RO only; no builder license)
Common questions
- Do I have to take the Mississippi general contractor exam if I'm licensed in New York?
- The trade exam is waived, but Mississippi requires a law or code exam.
- How long do I need to have held my New York license?
- At least 1 year before applying.
- What does it cost to get a Mississippi general contractor license from New York?
- Published fees on this path total $520, not counting exam vendor fees or bonds.
- Do my New York work hours count in Mississippi?
- Yes. Documented out-of-state experience counts toward Mississippi's eligibility requirements.
- How long does the application take?
- The board's published or typical processing time is about 7 days.
- Does it work the other way, from Mississippi to New York?
- Not necessarily. Reciprocity is directed. Going from Mississippi to New York, the mechanism is not applicable.
Sources
- Mississippi State Board of Contractors - Classifications (Building Construction; Residential Builder; Residential Remodeler) · Miss. Code Ann. 31-3-13(h) (cited on the page) · Mississippi State Board of Contractors · Agency Page · verified September 17, 2026
- MSBOC Commercial Application for a Certificate of Responsibility (2026 revision) · Mississippi State Board of Contractors · Form · verified September 17, 2026
- Mississippi Commercial Contractor Laws and Rules (Miss. Code Title 31 Chapter 3 and Board Rules Part 802) · Miss. Code Ann. 31-3-1, 31-3-13, 31-3-15, 31-3-17; 30 Miss. Admin. Code Pt. 802, R. 1.1 · Mississippi State Board of Contractors · Admin Rule · verified September 17, 2026
- Mississippi State Board of Contractors - Frequently Asked Questions · Mississippi State Board of Contractors · Faq · verified September 17, 2026
- MSBOC Fee Schedule effective January 1, 2016 · Mississippi State Board of Contractors · Form · verified September 17, 2026
- Mississippi State Board of Contractors - Apply for a License (commercial and residential) · Mississippi State Board of Contractors · Agency Page · verified September 17, 2026
- State of Mississippi Contractor Examinations - PSI Candidate Information Bulletin · PSI Services LLC for the Mississippi State Board of Contractors · Other · verified September 17, 2026
- Mississippi State Board of Contractors - Reciprocity (trade-exam waiver agreements by origin board) · Miss. Code Ann. 73-50-1 and 73-50-2 (referenced on the page) · Mississippi State Board of Contractors · Agency Page · verified September 17, 2026
- Mississippi State Board of Contractors - What You Need to Know About Testing · Mississippi State Board of Contractors · Agency Page · verified September 17, 2026
- MSBOC Form UROL - Waiver of Exam pursuant to the Universal Recognition of Occupational Licenses Act · Miss. Code Ann. 73-50-2 · Mississippi State Board of Contractors · Form · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.