New York to Tennessee: general contractor license reciprocity
New York does not issue a statewide general contractor license, so there is nothing to transfer. Here is Tennessee's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
BC-B or BC license, including the NASCLA Accredited Examination route
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Tennessee accepts the NASCLA Accredited Examination for Commercial General Building Contractors in place of its own commercial trade examination. The Board's exam information page names the NASCLA national commercial examination as accepted, and the Board's trade exam waiver document matches it to the BC-B Commercial classification, alongside the NASCLA electrical examination which matches to CE. A contractor who already holds the NASCLA credential therefore does not sit the Tennessee BC-B trade examination, but must still pass the Tennessee Business and Law examination and complete the whole application: Qualifying Agent, CPA-reviewed or CPA-audited financial statement, general liability and workers' compensation insurance, Letter of Reference, notarized Contractor's Affidavit and Secretary of State registration. An applicant with neither the NASCLA credential nor a license from a waiver state sits the Tennessee trade examination for the classification requested as well as Business and Law. Out-of-state experience counts either way, because the Board weighs documented experience on projects of the size requested when it sets the classification and the monetary limit.
The trade examination is waived only for an applicant holding the NASCLA Accredited Examination for Commercial General Building Contractors or a license from one of the waiver states listed separately on this page. Everyone else sits the Tennessee examination for the classification requested: BC-B Commercial, BC Building Construction for combined residential, commercial and industrial work, BC-b(sm) for small commercial up to $1,500,000, or BC-C Industrial. The Business and Law examination is never waived on this route. Applications are decided at Board meetings, held at least six times a year, and an interview may be required. The Board does not publish a processing time; the Board office is (615) 741-8307 or (800) 544-7693.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must have passed a licensing exam in New York that the destination considers comparable.The Board's exam information page states that Tennessee accepts NASCLA accredited examinations for Commercial General Building Contractors and for Electrical contractors, and the Board's trade exam waiver document lists a NASCLA row mapping the national commercial and electrical examinations to the Tennessee BC-B and CE classifications. The Board does not map the NASCLA examination to the residential BC-A classification. The NASCLA credential is origin-independent: it is an examination a candidate sits, not a license held in another state, and it does not waive the Tennessee Business and Law examination or any application, financial, insurance or registration requirement.
- Documented construction experience appropriate to the classification and monetary limit requested. Tennessee sets no fixed minimum number of years, but the Board states it prefers about three years and weighs experience, plant and equipment when it assigns a classification.Experience may be shown through previous employment, volunteer work, internships, education or training, evidenced by letters of recommendation, certificates, diplomas or employment verification, and may have been earned working for other contractors or in another state.
- The Qualifying Agent who holds the out-of-state credential is an owner, officer or full-time employee of the Tennessee applicant entity; a Qualifying Agent who is not an owner files a Power of Attorney with the application.
What you'll do to get licensed in Tennessee
- 1Law / code exam. Pass a law, rules, or code exam. Tennessee Business and Law examination, taken by the Qualifying Agent after the Board approves the application. It is open book, 50 questions, 140 minutes, 73% to pass, and is drawn from the Contractors' Guide to Business, Law and Project Management, Tennessee Edition. It is not waived by any trade exam waiver agreement or by the NASCLA examination; the only contractor license that does not require it is the restricted residential BC-A/r. Examination scores are typically treated by the Board as valid for two years..
- 2Trade exam. Pass the destination's trade exam (if applicable). Tennessee BC-B Commercial trade examination, administered after the Board approves the application. It is open book, 100 questions, 300 minutes, 73% to pass. It is required only of applicants who do not hold the NASCLA Accredited Examination for Commercial General Building Contractors and do not come in on a trade exam waiver. The equivalent examinations for the other general classifications are BC Building Construction (100 questions, 300 minutes), BC-b(sm) Small Commercial (70 questions, 200 minutes) and BC-C Industrial (72 questions, 210 minutes)..
- 3Application fee. Pay the application fee ($250). Non-refundable application and initial license fee of $250, paid with the Initial New Contractor Application at core.tn.gov (Tenn. Comp. R. & Regs. 0680-01-.20(1)). The license renews every two years at $200, with a $20 per month late penalty for up to twelve months..
- 4Exam fee. Pay the exam fee. Examination fee, paid to the testing company rather than to the Board. The Board's rule sets the fee as whatever the administering company charges subject to Board approval, so no amount is published by the Board; Prov began administering Tennessee contractor examinations on July 1, 2026 and publishes the current fee when an examination is booked. One fee is charged for each examination taken..
- 5Financial responsibility. Show financial responsibility. Financial statement prepared by a licensed public accountant or CPA on the accountant's letterhead, in the name of the applicant entity, conforming to GAAP and dated no more than twelve months before the application. There is no fixed minimum dollar figure: the monetary limit on the license is set at ten times the lesser of working capital and net worth, supported by experience, so a $150,000 limit needs $15,000 of each and an unlimited license needs $300,000 of each. A reviewed opinion is required for a limit of $3,000,000 or less and an audited opinion above that. A line of credit or a Board Guaranty Agreement may be used to supplement working capital or net worth..
- 6Surety bond. Post a surety bond (if applicable). Optional alternative to the CPA-reviewed or CPA-audited financial statement: from July 1, 2026 the Board accepts a Contractors' Surety Bond on the Board's own form in an amount of at least 50% of the monetary limit requested. A bond or Guaranty Agreement may also be required in addition to the financial statement where the statement is primarily cash without fixed assets or where a parent company guarantees the applicant..
- 7Insurance. Carry the required insurance ($100,000). Certificate of general liability insurance in the same name as the license, listing the Board as certificate holder. The Board's minimum coverage is set by the monetary limit requested: $100,000 of coverage for a limit up to $500,000, $500,000 of coverage for a limit of $501,001 to $1,500,000, and $1,000,000 of coverage above $1,500,001 to unlimited. Workers' compensation insurance is also required unless the business has no employees and qualifies for an exemption or registers as a Construction Services Provider. The amount shown is the lowest coverage tier..
- 8Business license. Obtain a business license. The license is issued to a legal entity in its exact name, so the corporation, LLC or limited partnership must be registered with the Tennessee Secretary of State before the license is issued; an entity formed in another state registers as a foreign entity and files its Certificate of Authority or Articles of Organization. A separate business tax license from the Tennessee Department of Revenue is needed for each city or county the contractor operates in..
- 9Other. Letter of Reference on the Board's form from a past client, employer or code official who can speak to construction experience; it may be from outside Tennessee but may not come from a relative, and only one is needed. Also required: a Contractor's Affidavit signed and notarized by the Qualifying Agent, owners, partners, members, main officers and major stockholders, a statement of experience and management information, and a list of equipment. An interview at a Board meeting may be required, for example where the Qualifying Agent is not a majority owner and has been employed less than six months, where the experience shown is thin for the limit requested, or where there is complaint, judgment, bankruptcy or felony history..
Published fees on this path total $250, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam · if applicable
- Exam fee
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · if applicable
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · $100,000
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Tennessee licenses general contractors
Tennessee general contractor · “Contractor license, BC-B Commercial or BC Building Construction classification”
Statewide license
Issued by Tennessee Board for Licensing Contractors (Department of Commerce and Insurance)
Tennessee licenses contractors at state level, and the unlimited tier is the BC family of building classifications issued by the Board for Licensing Contractors under T.C.A. Title 62, Chapter 6. BC-B Commercial covers buildings for use and occupancy by the general public, including residential buildings of more than four units or more than three stories; BC Building Construction is the full classification covering residential, commercial and industrial work and all 34 building categories; BC-b(sm) is small commercial capped at $1,500,000 and BC-C is industrial. A license is required before bidding on, offering on or contracting for a project of $25,000 or more. The license is held by the business, issued in the entity's exact name and qualified by a named Qualifying Agent who is an owner, officer or full-time employee and who sits the examinations, so an inbound contractor applies as or for the entity that will sign contracts. Every license carries a monetary limit set at ten times the lesser of working capital and net worth on a CPA-reviewed or CPA-audited financial statement, plus documented experience on projects of that size; above $3,000,000 the statement must be audited, and unlimited means showing $300,000 in both working capital and net worth. Tennessee accepts the NASCLA Accredited Examination for Commercial General Building Contractors in place of its own commercial trade examination, and has trade exam waiver agreements with a short list of named states.
Why New York has nothing to transfer
New York general contractor · “General Contractor Registration (NYC) / General Contractor and Light Commercial Contractor license (Buffalo)”
Licensed by cities and counties
Issued by New York City and city building departments (no statewide general or building contractor license)
New York has no statewide general, commercial, building or unlimited contractor license, and no state board examines or qualifies builders. The Department of State's Division of Licensing Services regulates 35 occupations and none of them is contractor; what the state does license around construction is narrow and specialized — home inspectors, manufactured housing, security and fire alarm installers through the Department of State, and asbestos contractors through the Department of Labor — while the individual building trades are licensed locally rather than by the state. Commercial and new-building work is controlled through the building permit, city by city. New York City requires a General Contractor Registration from the Department of Buildings before a contractor can pull New Building permits for one-, two- and three-family homes, and a registered Construction Superintendent at new buildings and demolitions nine stories and below; Buffalo issues graded General Contractor, New Housing, Light Commercial and Demolition licenses through a monthly advisory board. Most county home improvement laws stop short of this tier on purpose — Suffolk's and Westchester's both exclude new home construction — so outside the cities that license, a commercial builder in New York works under the permit and the Uniform Code with no contractor credential at all. A general contractor arriving from another state has nothing to transfer at state level and no reciprocity to apply for: the work is registering where registration is required and making sure the electrical, plumbing and fire-protection scopes are performed by people holding the right local trade licenses.
How local licensing works in New York
How it works in New York. No New York agency issues a general, commercial, building or unlimited contractor license. There is no state qualifying party, no business-and-law exam, no financial statement filed with a state board and no NASCLA route, because there is no board to file with. That means an out-of-state general contractor's license, its classification and any NASCLA Accredited Examination score carry no weight at state level. What decides whether you can work is the jurisdiction: a registration in New York City, a graded license in Buffalo, a county home improvement license where the job is a renovation rather than a new building, and the correct local trade licenses for the subcontracted scopes everywhere.
New York City — General Contractor Registration. The Department of Buildings requires that "all contractors who build one-, two-, and three-family homes must register with the Department to obtain New Building permits." Registration is $300, renewal $240, late renewal $50, and the term is three years. The applicant must "be at least eighteen (18) years old", "be able to read and write the English language", show good moral character, pass a background investigation and prove financial solvency — the last of which means a company bank account with "a minimum end balance of at least $25,000 for the past three (3) months", evidenced by three consecutive statements. Insurance is general liability with a $1 million minimum, plus workers' compensation and disability certificates. The filing is a notarized LIC6 form with EIN documentation, government photo ID, a Child Support Certification Form and proof of business address, submitted through DOB NOW; paper applications have not been accepted since September 7, 2021. There is no exam and no published experience minimum.
New York City — larger and commercial work. For buildings above the one-to-three-family tier, New York City does not license the general contractor at all; it regulates the site. "A registered Construction Superintendent is required at new buildings and buildings under demolition nine stories and below" — registration $100, renewal $50, term three years, applied for in DOB NOW after a DOB-approved training course. Bigger jobs are governed by site safety requirements and by DOB's other licenses and registrations: electricians, master and journeyman plumbers and fire suppression piping contractors, riggers, sign hangers, hoisting machine operators, welders, concrete safety managers and concrete testing laboratories, site safety professionals and special inspection agencies. Qualifications for all of them are in Chapter 4 of the 2022 NYC Administrative Code. Separately, any work on residential property in the five boroughs still needs the DCWP Home Improvement Contractor license — see the residential level, because in practice most contractors working in New York City need that one first.
Buffalo. Buffalo is the New York city that most closely resembles a classic graded contractor license. Under Chapter 144 of the City Ordinances, anyone "doing construction work in the City of Buffalo" needs a city Contractor License, which "does not allow for plumbing, heating, cooling or electrical work", and working without one is an unclassified misdemeanor carrying up to $1,000 or 60 days. At this tier the categories are General Contractor — "Companies with extensive experience in major construction work will qualify. To perform construction of new residential and commercial structures without limitations", including infrastructure — New Housing Contractor (new residential and commercial structures up to three stories plus remodeling, excluding infrastructure), Light Commercial Contractor (repairs, remodeling, alterations, conversions and modernization of commercial property, plus additions and new accessory structures up to three stories), Construction Manager (oversight and scheduling only, cannot perform construction work) and Demolition Grades 1 through 4. Minimum general liability aggregates are $2,000,000 for General Contractor and every demolition grade, $500,000 for Light Commercial, Specialty, Subcontractor and New Housing, and $50,000 for Handyman and Construction Manager, with the Office of Licenses at 301 City Hall as certificate holder and no PO Box addresses accepted. Demolition Grades 2 and 3 need reference letters from two townships where demolition work was performed, waivable with a resume showing ten years of demolition experience; Grade 4 needs a New York State explosives license held by a major corporate officer. New Housing applicants file copies of the warranties given to new home buyers. Asbestos abatement requires the firm's New York State Department of Labor Asbestos License, lead abatement requires EPA firm certification, and fire suppression system installation requires approval from the Chief of Fire Prevention. Applications must arrive at least seven days before the monthly Construction & Home Improvement Advisory Board meeting, and "attendance at the meeting is mandatory for the applicant" unless a notarized letter authorizes a representative. The fee is not printed on the application packet; ask the Office of Licenses on (716) 851-6583.
The counties stop below this tier. Nassau, Suffolk, Westchester, Rockland and Putnam license home improvement, not building. Suffolk's Chapter 563 definition expressly excludes "the construction of a new home", and the Westchester law states that it "shall not apply to ... the construction of a new home building", along with plumbing work, electrical work and architectural services. A builder putting up new houses in those counties may therefore need no county license at all, while the same builder's remodeling arm does — and both still answer to the town or village building department. Check the scope with the county before assuming either way.
Yonkers and Rochester. Yonkers licenses home improvement contractors who "renovate existing dwellings of 1 to 3 families" and does not issue a commercial builder license; new and commercial construction is handled through the Department of Housing and Buildings permit process. Rochester licenses only electricians, plumbers and stationary engineers / refrigeration operators, and holds the permit applicant responsible for making sure "all required contractors are licensed, proof of insurance is filed and the project complies with the permit".
Everywhere else. Outside the jurisdictions above, commercial construction in New York is governed by the Uniform Code and the local building department, and in most towns and villages a general contractor needs no license — only permits, insurance and licensed trades. Confirm with the building department for the job site, and where the project involves residential property anywhere in the state, General Business Law Article 36-A's written-contract and deposit-escrow rules still apply.
- New York City (Department of Buildings — General Contractor Registration for 1-, 2- and 3-family New Building permits)
- New York City (Department of Buildings — Construction Superintendent registration, nine stories and below)
- Buffalo (Office of Licenses — General Contractor, New Housing, Light Commercial, Construction Manager and Demolition licenses)
- Suffolk County (home improvement license excludes the construction of a new home)
- Westchester County (home improvement license does not apply to the construction of a new home building)
- Yonkers (Consumer Protection Bureau licenses 1-3 family renovation only; no commercial builder license)
- Rochester (Licensed Trades — electrical, plumbing and SE/RO only; no builder license)
Common questions
- Do I have to take the Tennessee general contractor exam if I'm licensed in New York?
- The trade exam is waived, but Tennessee requires a law or code exam.
- What does it cost to get a Tennessee general contractor license from New York?
- Published fees on this path total $250, not counting exam vendor fees or bonds.
- Do my New York work hours count in Tennessee?
- Yes. Documented out-of-state experience counts toward Tennessee's eligibility requirements.
- Does it work the other way, from Tennessee to New York?
- Not necessarily. Reciprocity is directed. Going from Tennessee to New York, the mechanism is not applicable.
Sources
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- Tennessee Board for Licensing Contractors - Contractor License Application Package and Instructions · T.C.A. Sections 62-6-111, 62-6-120 · Tennessee Board for Licensing Contractors · Form · verified September 17, 2026
- Tennessee Board for Licensing Contractors - Classification Outline · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
- Tennessee Board for Licensing Contractors - Exam Information · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
- Tennessee Board for Licensing Contractors - Fees · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
- Tennessee Board for Licensing Contractors - Get a Contractor License · T.C.A. Title 62, Chapter 6 · Tennessee Department of Commerce and Insurance · Agency Page · verified September 17, 2026
- Trade Exam Waiver (Reciprocity) with Tennessee and Request for Contractor License Verification (Rev. 06/2026) · Tennessee Board for Licensing Contractors · Agreement Document · verified September 17, 2026
- Tennessee Board for Licensing Contractors - Candidate Information Bulletin · PSI Services LLC for the Tennessee Board for Licensing Contractors · Other · verified September 17, 2026
- Rules of the Tennessee Board for Licensing Contractors, Chapter 0680-01 Licensing (November 2025 revision) · Tenn. Comp. R. & Regs. 0680-01-.02, -.12, -.13, -.16, -.20, -.29, -.30, -.32 · Tennessee Secretary of State, Division of Publications · Admin Rule · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.