Ohio to Georgia: general contractor license reciprocity
Ohio does not issue a statewide general contractor license, so there is nothing to transfer. Here is Georgia's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Licensure using the NASCLA Accredited Examination (any state, no agreement needed)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Georgia's own trade examination for the General Contractor and General Contractor Limited Tier licenses is the NASCLA Accredited Examination for Commercial General Building Contractors, so a contractor arriving from any state who has already passed it does not sit a separate Georgia trade examination. You release your NASCLA transcript to the Board with the application and, once the Board approves you, take the Georgia Business and Law examination through PSI; that examination is never waived. If you have not taken the NASCLA examination, it is the examination you will be approved to sit, and it is available to candidates in any participating state. Everything outside the trade examination still has to be met on its own: the Board's experience routes, a minimum net worth of $150,000 for the standard tier or $25,000 for the Limited Tier, $500,000 per occurrence of general liability insurance, workers compensation once the business has three or more employees in Georgia, and Georgia Corporations Division registration if the license will be held by a company. Out-of-state experience counts toward eligibility; the Board does not require the work or the supporting commercial project to have been performed in Georgia.
This is the NASCLA pathway, and in Georgia it is the ordinary pathway rather than an alternative one: the Board's licensure comparison chart lists the NASCLA Accredited Examination and the Georgia Business and Law examination as the examination requirements for both general tiers, and every General Contractor application checklist asks for NASCLA transcripts. The Board accepts NASCLA in the General Contractor Division only; the residential classifications have their own Georgia examinations. Applications are filed in the GOALS portal and generally processed within 20 business days, with a deficiency letter restarting the count and a 60-day cure window. Exam approval letters are valid for one year and allow three sittings; the old examination-exemption or grandfathering route has closed. General contractor licenses renew by 30 June of even-numbered years and carry no continuing education requirement.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
- Typical processing
- About 20 days
What you must already have
- You must have passed a licensing exam in Ohio that the destination considers comparable.The Board's licensure comparison chart names the NASCLA Accredited Examination for Commercial General Building Contractors as the examination requirement for both the General Contractor and the General Contractor Limited Tier license, alongside the Georgia Business and Law examination. A NASCLA certificate earned while licensed in another participating state therefore satisfies Georgia's trade examination outright; you release the NASCLA transcript to the Board with the application. The NASCLA examination is origin-independent and is not a reciprocal agreement with any state, and it does not waive the Georgia Business and Law examination or any application, experience, net worth or insurance requirement.
- At least 21 years old.
- One of the Board's three experience routes: a four-year degree in engineering, architecture, construction management, building construction or a related field acceptable to the Division, plus one year working as or for a general contractor; accredited college coursework plus practical experience totaling four years; or at least four years of active construction experience, of which two were as or for a general contractor and one in estimating, engineering, supervision or project management.
- At least one commercial project, within five years of the application, on which you had general oversight and primary management responsibility as supervisor for its successful performance and completion. The Board does not require the project to have been in Georgia.
What you'll do to get licensed in Georgia
- 1Law / code exam. Pass a law, rules, or code exam. Georgia Business and Law examination, taken through PSI after the Board approves the application. It is required of every general contractor applicant, including NASCLA holders and reciprocity applicants, and is never waived..
- 2Trade exam. Pass the destination's trade exam (if applicable). NASCLA Accredited Examination for Commercial General Building Contractors. Shown as optional because applicants who already hold it simply release the transcript to the Board; applicants who do not will be approved to sit it, and it is administered by NASCLA rather than by Georgia, so it can be taken in any participating state before or after applying here..
- 3Application fee. Pay the application fee. A non-refundable application fee is due with the online application. The Board does not print the amount on its how-to guides; the current amount is on the fee schedule in the GOALS portal at https://goals.sos.ga.gov/, and the Board can be reached at (404) 424-9966..
- 4Exam fee. Pay the exam fee. Examination fees paid to the testing organization when each examination is scheduled: PSI for the Georgia Business and Law examination and NASCLA for the accredited examination and its transcript. The Board does not publish either fee..
- 5Financial responsibility. Show financial responsibility of at least $150,000. An affirmed minimum net worth of $150,000 for a General Contractor license, or $25,000 for the General Contractor Limited Tier, supported by the net worth affirmation or financial documents the application asks for. If you are applying as a qualifying agent the net worth must be the business organization's, not yours. Unlike the residential division, the general division does not offer a surety bond, line of credit or letter of credit as a substitute for the net worth affirmation..
- 6Insurance. Carry the required insurance ($500,000). General liability insurance of at least $500,000 per occurrence for both general tiers, evidenced by a signed current certificate of insurance naming the State Licensing Board for Residential and General Contractors, 237 Coliseum Drive, Macon, GA 31217 as certificate holder. Binders, information pages, policies and declaration pages are not accepted. An individual applicant must be the named insured; a qualifying agent's coverage must be in the company's name. Workers compensation insurance is required once the business has three or more employees in Georgia..
- 7Business license. Obtain a business license. If the license will be held by a company rather than by you personally, that business organization must be registered with the Georgia Corporations Division and, if formed outside Georgia, hold a Certificate of Authority to transact business here; you then apply as its qualifying agent. An individual license does not let you perform work on behalf of any LLC or corporation, even one you own outright..
- 8Contractor license. Hold or obtain a contractor license (if applicable). A general contractor license does not authorize electrical, plumbing, conditioned air, low voltage or utility work. Under O.C.G.A. 43-41-2(5) that work must be performed by someone licensed for it under Title 43 Chapter 14, whether a subcontractor or a separately licensed member of your own organization..
- 9Other. Supporting documents filed with the application: the work experience record and employment affidavit, a project reference affidavit for the qualifying commercial project, an official college transcript, diploma or certificate where you are qualifying on education, a Secure and Verifiable Document such as a driver license or passport with an affidavit of lawful presence under O.C.G.A. 50-36-1, a list of affiliations, bankruptcy documents if applicable, and disclosure of any disciplinary action or sanctions with supporting court documents and a letter of explanation..
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam · if applicable
- Exam fee
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · $500,000
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Georgia licenses general contractors
Georgia general contractor · “General Contractor (also General Contractor Limited Tier, capped at $1,000,000 per contract)”
Statewide license
Georgia licenses commercial general contractors statewide through the General Contractor Division of the State Licensing Board for Residential and General Contractors, part of the Secretary of State's Professional Licensing Boards Division. A General Contractor license is unlimited as to the type of work and carries no financial limit on any project; the General Contractor Limited Tier is the same license capped at contracts of no more than $1,000,000. Neither license covers electrical, plumbing, conditioned air, low voltage or utility work, which must be performed by contractors licensed under O.C.G.A. Title 43 Chapter 14. As in the residential division the credential is usually entity-held: an individual license only covers work in your own name or as a sole proprietorship, and to contract through a company you apply as its qualifying agent, the person with final approval authority over its construction work, contracts and related financial affairs, with the financial and insurance proofs in the company's name. What makes Georgia unusual for an inbound contractor is the examination: the Board's own trade examination for both general tiers is the NASCLA Accredited Examination for Commercial General Building Contractors, so a NASCLA certificate earned in another state already satisfies it. The Georgia Business and Law examination is always separate and is never waived, including for reciprocity applicants.
Why Ohio has nothing to transfer
Ohio general contractor · “General / building contractor registration (city-issued)”
Licensed by cities and counties
Issued by No state authority; cities and counties register commercial building contractors
Ohio has no statewide general, commercial or unlimited building contractor license, so there is nothing at state level for an out-of-state general contractor's license to transfer into and no NASCLA route to take. The Ohio Construction Industry Licensing Board licenses individual contractors in five specialty trades only - electrical, HVAC, refrigeration, plumbing and hydronics - under R.C. Chapter 4740, and its board has an electrical section, a plumbing and hydronics section and an HVAC and refrigeration section but no building section. Those five licenses are also the only ones Ohio's reciprocity agreements reach: OCILB's published partner list names Alabama, Arkansas, Kentucky, Louisiana, Mississippi, North Carolina, South Carolina, Tennessee, Texas, Virginia and West Virginia, and every entry is scoped to one or more of the five trades. Commercial building is instead controlled through city permitting, and the requirements are administrative rather than technical: Columbus registers a General Contractor on a $25,000 bond and a liability certificate with no exam, Cincinnati registers a Building Construction Contractor on insurance and workers' compensation for $131.25 a year, Cleveland requires general contractors to be bonded, insured and registered under Chapter 3107 of its Codified Ordinances, and Akron requires anyone whose work needs a permit to register. Toledo and Dayton license only the trades and have no commercial building contractor license at all, and Summit County, which issues Akron's building permits, replaced annual contractor registration with a permit-based process in 2024. None of these registrations involves a trade or business-law exam, a qualifying party, a financial statement or an experience review, and none of them recognizes another state's license, so a general contractor arriving in Ohio registers jurisdiction by jurisdiction and makes sure the electrical, HVAC, refrigeration, plumbing and hydronics scope is performed under the correct OCILB state licenses.
How local licensing works in Ohio
How local licensing works. No Ohio agency issues a general, commercial, building or unlimited contractor license, and there is no Ohio equivalent of a qualifying party, a NASCLA route or a state business-and-law exam for builders. Ohio has around 800 certified building departments, each with its own contractor rules, so identify the department with jurisdiction over the site - the Board of Building Standards map at com.ohio.gov/JurisdictionMap does this by address - and register there before bidding. One statewide rule shapes what those departments ask for: R.C. 4740.12 provides that "no political subdivision, district, or agency of the state may adopt an ordinance or rule that requires contractor registration and the assessment of a registration or license fee unless that ordinance or rule also requires any contractor who registers and pays the registration or license fee to be licensed in the contractor's trade pursuant to this chapter", which OCILB describes as requiring building and health departments with a registration program to demand the state license before issuing commercial permits.
Columbus. Building and Zoning Services registers a General Contractor under Chapter 4114 of the Columbus Building Code. The registration "can be associated with all permits to build new 1, 2, or 3 family, multi-family (4 or more dwelling units), and commercial structures, as well as alter or add to existing multi-family and commercial structures." The filing is a notarized application, "a Bond in the amount of $25,000" on the city's own bond form under C.C. 4114.515, and a certificate of liability insurance with "limits of liability no less than $300,000.00 for damages to a single person and $500,000.00 for one occurrence", naming Building and Zoning Services as certificate holder. There is no exam, experience, reference or financial requirement, and no board hearing - the General Contractor registration is one of the few Columbus categories that does not go before a review board. The 2026 fee schedule sets a $350 annual contractor license and registration fee, with $100 for a change of assignment or elective suspension; the registration runs to "the end of the twelfth month from the date of issuance." 111 North Front Street, (614) 645-7433, [email protected].
Cleveland. The Department of Building & Housing requires that contractors "must be bonded, insured, and registered" and that "contractors must be registered with the City of Cleveland within their trade in order to obtain permits. Separate permits are required for each separate trade, i.e. general, plumbing, HVAC, electrical, and elevator." Registration sits in Chapter 3107 of the Codified Ordinances, Registration of Contractors, which provides for a Certificate of Registration and a Limited Certificate of Registration with separate qualifications for each. A General Contractor Registration Application package is published in the Contractor Packages section of the city's construction permitting resources page, and the bond, insurance and fee figures are stated in that package and in Chapter 3107 rather than on the department's web pages - confirm them with Building & Housing on 216-664-2910 before filing. Registration status is verified on 216-664-2884, and electrical, plumbing and HVAC registrations require the OCILB state license first.
Cincinnati. Buildings & Inspections registers contractors under Chapter 1106 of the Municipal Code, and commercial builders fall in the Building Construction Contractor class, the catch-all that "will apply to all other contractors that are not addressed in the two previous descriptions" and covers specialties such as crane operations, demolition, carpentry, masonry and glazing alongside new one-, two- and three-family construction. Electrical, plumbing, HVAC, hydronic and refrigeration firms register in the separate OCILB Licensed Specialty Contractor class on their state licenses, and that city registration runs to the state license's expiry date. The filing is the signed application, liability insurance with "minimum liability limits of one hundred thousand dollars ($100,000) for damages to a single person, and three hundred thousand dollars ($300,000) for one (1) occurrence" (crane operators carry $1,000,000 per occurrence, $2,000,000 aggregate and a $4,000,000 or $10,000,000 umbrella depending on lift capacity), proof of Ohio workers' compensation, an assignment form listing everyone authorized to sign permit applications, and a federal tax ID. The fee is $125.00 plus surcharges, $131.25 a year, for up to three years; same-day processing is $208 extra. There is no exam and no bond. A company operating under more than one business name needs a separate registration for each legal entity, and where a company holds several OCILB licenses through different people, each license holder registers separately. 805 Central Avenue, Suite 500, (513) 352-3271.
Akron and Summit County. Akron requires "all contractors regardless of trade to register as a contractor if the work they are performing requires a permit to do the work", on a contractor registration application with an Akron Tax Registration Number, a certificate of liability insurance, state licenses where the trade needs one, and workers' compensation coverage unless there are no employees. No exam or fee is published. Ohio Building Code permits for Akron projects come from the Summit County Department of Building Standards, which since March 2024 has run "a permit-based process" in place of annual contractor registration: "the $135 annual fee for contractors and the requirement for a $10,000 bond are now eliminated", while "contractors will still be required to provide liability insurance, State license if applicable, and a Tax ID Number", and commercial application fees rose by $10. Akron Plans & Permits, 1030 E. Tallmadge Ave., 330-375-2010; Summit County Building Standards, same address, 330-630-7280.
Toledo. Toledo licenses Electrical, Mechanical, Plumbing, Fire, Home Improvement and Remodeling, Sign and Sidewalk contractors, plus journeymen and apprentices in the electrical, HVAC, plumbing and refrigeration trades. There is no commercial or general building contractor license, so a commercial builder in Toledo pulls permits without a city contractor credential while the trades hold theirs. All Toledo licenses renew annually and expire December 31. Division of Building Inspection, One Government Center, Suite 1600, 419-245-1220.
Dayton. The Division of Building Inspection publishes registration and bond forms only for electrical, plumbing, warm air heating and pipe-laying contractors. Dayton has no general or building contractor registration; a commercial builder works through the registered trades. Building Inspection, 937-333-3979; One Stop Center, 371 West Second Street, 937-333-3883.
Cuyahoga County. A Division of Building Standards was created in 2025 to serve partner communities with contractor registration, plan review, permitting and inspections, with registration "completed through a secure online portal" on its site. The partner community list is still being announced and "an approved fee schedule will be released by December 1, 2026", so check the state's building department look-up tool for a specific address before assuming which department has jurisdiction. [email protected].
What does and does not travel. An out-of-state general contractor license, a NASCLA Accredited Examination and out-of-state project experience carry no weight in any of these jurisdictions, because none of them tests or qualifies commercial builders at all. What does matter is holding, or employing someone who holds, the OCILB license for each of the five state-licensed trades in scope, then registering that license with the city as well. OCILB's own reciprocity list is the only place an out-of-state license shortens the path, and every entry on it - Alabama, Arkansas, Kentucky, Louisiana, Mississippi, North Carolina, South Carolina, Tennessee, Texas, Virginia and West Virginia - is scoped to the electrical, HVAC, refrigeration, plumbing or hydronics trades, so those routes belong on this site's electrical, HVAC and plumbing pages rather than here.
- Columbus (Building and Zoning Services - General Contractor registration, $25,000 bond)
- Cleveland (Department of Building & Housing - general contractor registration under Codified Ordinances ch. 3107)
- Cincinnati (Buildings & Inspections - Building Construction Contractor registration)
- Akron (Engineering Bureau - contractor registration for any permitted work)
- Summit County (Department of Building Standards - permit-based contractor process; issues Akron's building permits)
- Toledo (Division of Building Inspection - trade and remodeling licenses only; no general building contractor license)
- Dayton (Division of Building Inspection - trade contractor registration only)
- Cuyahoga County (Division of Building Standards - contractor registration for partner communities)
Common questions
- Do I have to take the Georgia general contractor exam if I'm licensed in Ohio?
- The trade exam is waived, but Georgia requires a law or code exam.
- Do my Ohio work hours count in Georgia?
- Yes. Documented out-of-state experience counts toward Georgia's eligibility requirements.
- How long does the application take?
- The board's published or typical processing time is about 20 days.
- Does it work the other way, from Georgia to Ohio?
- Not necessarily. Reciprocity is directed. Going from Georgia to Ohio, the mechanism is not applicable.
Sources
- O.C.G.A. Title 43, Chapter 41 - Residential and General Contractors (Board law as published by the Board) · O.C.G.A. 43-41-2, 43-41-5(b), 43-41-6, 43-41-7(2), 43-41-8(a)(3), 43-41-9, 43-41-17 · Georgia Secretary of State, State Licensing Board for Residential and General Contractors · Statute · verified September 17, 2026
- Ga. Comp. R. & Regs. Chapter 553-4 - Qualifications for Licensure, General Contractor Division · Ga. Comp. R. & Regs. 553-4-.01 through 553-4-.07 · Georgia Secretary of State, Rules and Regulations of the State of Georgia · Admin Rule · verified September 17, 2026
- State Licensing Board for Residential and Commercial General Contractors · Georgia Secretary of State, Professional Licensing Boards Division · Agency Page · verified September 17, 2026
- Licensure Comparison Chart - State Licensing Board for Residential and General Contractors (Revised 02/25) · O.C.G.A. 43-41-2(5), (9), (10), (11); 43-41-17 · Georgia Secretary of State, State Licensing Board for Residential and General Contractors · Other · verified September 17, 2026
- Residential and Commercial General Contractors - Frequently Asked Questions · Georgia Secretary of State, Professional Licensing Boards Division · Faq · verified September 17, 2026
- General Contractors: How to Guide (all General Contractor application types) · Georgia Secretary of State, Professional Licensing Boards Division · Agency Page · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.