Ohio to Mississippi: general contractor license reciprocity
Mississippi applies a specific rule to Ohio general contractors.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Ohio agreement does not reach Building Construction
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Mississippi's agreement with the Ohio Construction Industry Licensing Board waives examinations only for the Electrical, HVAC, Plumbing and Refrigeration classifications. It does not reach Building Construction, so an Ohio commercial contractor gets no trade-examination credit at this level and sits the Mississippi Building Construction examination, or the NASCLA Accredited Examination in its place, like any other applicant. An Ohio applicant who establishes residency in Mississippi may still be able to use the Universal Recognition of Occupational Licenses Act route described on the main pathway.
Authored because the Mississippi board publishes an explicit classification scope for Ohio that excludes building work. Ohio's own state contractor licensing covers the mechanical, electrical, plumbing, refrigeration and hydronics trades, which is why the agreement is drawn that way.
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Do not count
- Agreement
- Active
What you must already have
No eligibility conditions beyond holding the license are published for this path.
What you'll do to get licensed in Mississippi
- 1Law / code exam. Pass a law, rules, or code exam. Mississippi Law and Business Management examination through PSI: 50 questions, 2 hours, 70% to pass, open book. Every applicant for a Mississippi contractor license takes it, and no exam waiver agreement, NASCLA credential or universal-recognition waiver removes it..
- 2Trade exam. Pass the destination's trade exam. Mississippi Building Construction examination through PSI: 80 questions, 3 hours, 70% to pass, open book. An applicant may instead sit the NASCLA Accredited Examination for Commercial General Building Contractors, which Mississippi accepts for this classification..
- 3Application fee. Pay the application fee ($400). Commercial application fee of $400, which includes one trade classification. Each additional classification requested costs a further $100. Fees are not refundable and must be paid by check or money order. The annual renewal fee is also $400..
- 4Exam fee. Pay the exam fee ($120). PSI registration fee: $120 for one examination portion, $240 for two. The fee is charged for each registration, whether the examination is a first attempt or a repeat, and is not refundable or transferable..
- 5Financial responsibility. Show financial responsibility of at least $50,000. Reviewed or audited financial statement prepared and signed by a certified public accountant within the last twelve months, showing a net worth of at least $50,000 for a major classification such as Building Construction, or at least $20,000 for a specialty classification. A compilation is not accepted and the board states the requirement cannot be waived or substituted; there is no bond alternative, because Mississippi issues only an unlimited commercial license rather than monetary limitation tiers. The figure shown is the major-classification minimum..
- 6Insurance. Carry the required insurance. Certificate of general liability insurance showing at least $300,000 per occurrence and $600,000 aggregate, with the Mississippi State Board of Contractors named as certificate holder so it is notified if coverage is cancelled. The name insured must match the name the license is issued in. A workers compensation certificate is also required if the applicant has five or more employees..
- 7Business license. Obtain a business license. The certificate of responsibility is issued to a legal entity, so a corporation, LLC, LLP or limited partnership must be registered with the Mississippi Secretary of State and show proof of good standing before the license issues, and a company domiciled outside Mississippi must first qualify to do business in the State. Commercial applicants must also supply a Mississippi sales tax or use tax number and a Mississippi income tax or federal tax identification number..
- 8Other. Three reference letters, one of which must come from the applicant's bank or financial institution; a list of at least three completed jobs in the classification being applied for, which may be work done outside Mississippi; and proof that the qualifying party is employed by the applicant, by check stub, W-2 or a Secretary of State officer listing..
Published fees on this path total $520, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam
- Exam fee · $120
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Mississippi licenses general contractors
Mississippi general contractor · “Certificate of Responsibility, Building Construction classification”
Statewide license
Issued by Mississippi State Board of Contractors (MSBOC)
Mississippi's unlimited tier is the Certificate of Responsibility issued by the Mississippi State Board of Contractors in the Building Construction major classification. A commercial license is required of every contractor and subcontractor of any tier on a public or private project of $50,000 or more (Miss. Code Ann. 31-3-1), and Building Construction covers the construction of commercial buildings and single- or multiple-dwelling residential structures, together with additions, alterations, conversions, expansions, reconstruction, renovations and the associated landscaping, earthwork, parking areas, driveways and sidewalks. Holding the major classification entitles the licensee to perform every specialty classification listed beneath it; one classification is included in the application fee and each further one costs $100. The board states that it offers only an unlimited license, so there are no monetary limitation bands: instead every commercial applicant proves financial responsibility with a CPA-reviewed or audited statement showing a net worth of at least $50,000 for a major classification, or $20,000 for a specialty, with no bond substitute. The certificate belongs to the business and is qualified by a named person - an owner, officer or responsible managing employee who takes the examinations, must be genuinely employed by the certificate holder, and may qualify no more than three companies at once - so a contractor moving to Mississippi applies as or for the entity that will bid the work.
Why Ohio has nothing to transfer
Ohio general contractor · “General / building contractor registration (city-issued)”
Licensed by cities and counties
Issued by No state authority; cities and counties register commercial building contractors
Ohio has no statewide general, commercial or unlimited building contractor license, so there is nothing at state level for an out-of-state general contractor's license to transfer into and no NASCLA route to take. The Ohio Construction Industry Licensing Board licenses individual contractors in five specialty trades only - electrical, HVAC, refrigeration, plumbing and hydronics - under R.C. Chapter 4740, and its board has an electrical section, a plumbing and hydronics section and an HVAC and refrigeration section but no building section. Those five licenses are also the only ones Ohio's reciprocity agreements reach: OCILB's published partner list names Alabama, Arkansas, Kentucky, Louisiana, Mississippi, North Carolina, South Carolina, Tennessee, Texas, Virginia and West Virginia, and every entry is scoped to one or more of the five trades. Commercial building is instead controlled through city permitting, and the requirements are administrative rather than technical: Columbus registers a General Contractor on a $25,000 bond and a liability certificate with no exam, Cincinnati registers a Building Construction Contractor on insurance and workers' compensation for $131.25 a year, Cleveland requires general contractors to be bonded, insured and registered under Chapter 3107 of its Codified Ordinances, and Akron requires anyone whose work needs a permit to register. Toledo and Dayton license only the trades and have no commercial building contractor license at all, and Summit County, which issues Akron's building permits, replaced annual contractor registration with a permit-based process in 2024. None of these registrations involves a trade or business-law exam, a qualifying party, a financial statement or an experience review, and none of them recognizes another state's license, so a general contractor arriving in Ohio registers jurisdiction by jurisdiction and makes sure the electrical, HVAC, refrigeration, plumbing and hydronics scope is performed under the correct OCILB state licenses.
How local licensing works in Ohio
How local licensing works. No Ohio agency issues a general, commercial, building or unlimited contractor license, and there is no Ohio equivalent of a qualifying party, a NASCLA route or a state business-and-law exam for builders. Ohio has around 800 certified building departments, each with its own contractor rules, so identify the department with jurisdiction over the site - the Board of Building Standards map at com.ohio.gov/JurisdictionMap does this by address - and register there before bidding. One statewide rule shapes what those departments ask for: R.C. 4740.12 provides that "no political subdivision, district, or agency of the state may adopt an ordinance or rule that requires contractor registration and the assessment of a registration or license fee unless that ordinance or rule also requires any contractor who registers and pays the registration or license fee to be licensed in the contractor's trade pursuant to this chapter", which OCILB describes as requiring building and health departments with a registration program to demand the state license before issuing commercial permits.
Columbus. Building and Zoning Services registers a General Contractor under Chapter 4114 of the Columbus Building Code. The registration "can be associated with all permits to build new 1, 2, or 3 family, multi-family (4 or more dwelling units), and commercial structures, as well as alter or add to existing multi-family and commercial structures." The filing is a notarized application, "a Bond in the amount of $25,000" on the city's own bond form under C.C. 4114.515, and a certificate of liability insurance with "limits of liability no less than $300,000.00 for damages to a single person and $500,000.00 for one occurrence", naming Building and Zoning Services as certificate holder. There is no exam, experience, reference or financial requirement, and no board hearing - the General Contractor registration is one of the few Columbus categories that does not go before a review board. The 2026 fee schedule sets a $350 annual contractor license and registration fee, with $100 for a change of assignment or elective suspension; the registration runs to "the end of the twelfth month from the date of issuance." 111 North Front Street, (614) 645-7433, [email protected].
Cleveland. The Department of Building & Housing requires that contractors "must be bonded, insured, and registered" and that "contractors must be registered with the City of Cleveland within their trade in order to obtain permits. Separate permits are required for each separate trade, i.e. general, plumbing, HVAC, electrical, and elevator." Registration sits in Chapter 3107 of the Codified Ordinances, Registration of Contractors, which provides for a Certificate of Registration and a Limited Certificate of Registration with separate qualifications for each. A General Contractor Registration Application package is published in the Contractor Packages section of the city's construction permitting resources page, and the bond, insurance and fee figures are stated in that package and in Chapter 3107 rather than on the department's web pages - confirm them with Building & Housing on 216-664-2910 before filing. Registration status is verified on 216-664-2884, and electrical, plumbing and HVAC registrations require the OCILB state license first.
Cincinnati. Buildings & Inspections registers contractors under Chapter 1106 of the Municipal Code, and commercial builders fall in the Building Construction Contractor class, the catch-all that "will apply to all other contractors that are not addressed in the two previous descriptions" and covers specialties such as crane operations, demolition, carpentry, masonry and glazing alongside new one-, two- and three-family construction. Electrical, plumbing, HVAC, hydronic and refrigeration firms register in the separate OCILB Licensed Specialty Contractor class on their state licenses, and that city registration runs to the state license's expiry date. The filing is the signed application, liability insurance with "minimum liability limits of one hundred thousand dollars ($100,000) for damages to a single person, and three hundred thousand dollars ($300,000) for one (1) occurrence" (crane operators carry $1,000,000 per occurrence, $2,000,000 aggregate and a $4,000,000 or $10,000,000 umbrella depending on lift capacity), proof of Ohio workers' compensation, an assignment form listing everyone authorized to sign permit applications, and a federal tax ID. The fee is $125.00 plus surcharges, $131.25 a year, for up to three years; same-day processing is $208 extra. There is no exam and no bond. A company operating under more than one business name needs a separate registration for each legal entity, and where a company holds several OCILB licenses through different people, each license holder registers separately. 805 Central Avenue, Suite 500, (513) 352-3271.
Akron and Summit County. Akron requires "all contractors regardless of trade to register as a contractor if the work they are performing requires a permit to do the work", on a contractor registration application with an Akron Tax Registration Number, a certificate of liability insurance, state licenses where the trade needs one, and workers' compensation coverage unless there are no employees. No exam or fee is published. Ohio Building Code permits for Akron projects come from the Summit County Department of Building Standards, which since March 2024 has run "a permit-based process" in place of annual contractor registration: "the $135 annual fee for contractors and the requirement for a $10,000 bond are now eliminated", while "contractors will still be required to provide liability insurance, State license if applicable, and a Tax ID Number", and commercial application fees rose by $10. Akron Plans & Permits, 1030 E. Tallmadge Ave., 330-375-2010; Summit County Building Standards, same address, 330-630-7280.
Toledo. Toledo licenses Electrical, Mechanical, Plumbing, Fire, Home Improvement and Remodeling, Sign and Sidewalk contractors, plus journeymen and apprentices in the electrical, HVAC, plumbing and refrigeration trades. There is no commercial or general building contractor license, so a commercial builder in Toledo pulls permits without a city contractor credential while the trades hold theirs. All Toledo licenses renew annually and expire December 31. Division of Building Inspection, One Government Center, Suite 1600, 419-245-1220.
Dayton. The Division of Building Inspection publishes registration and bond forms only for electrical, plumbing, warm air heating and pipe-laying contractors. Dayton has no general or building contractor registration; a commercial builder works through the registered trades. Building Inspection, 937-333-3979; One Stop Center, 371 West Second Street, 937-333-3883.
Cuyahoga County. A Division of Building Standards was created in 2025 to serve partner communities with contractor registration, plan review, permitting and inspections, with registration "completed through a secure online portal" on its site. The partner community list is still being announced and "an approved fee schedule will be released by December 1, 2026", so check the state's building department look-up tool for a specific address before assuming which department has jurisdiction. [email protected].
What does and does not travel. An out-of-state general contractor license, a NASCLA Accredited Examination and out-of-state project experience carry no weight in any of these jurisdictions, because none of them tests or qualifies commercial builders at all. What does matter is holding, or employing someone who holds, the OCILB license for each of the five state-licensed trades in scope, then registering that license with the city as well. OCILB's own reciprocity list is the only place an out-of-state license shortens the path, and every entry on it - Alabama, Arkansas, Kentucky, Louisiana, Mississippi, North Carolina, South Carolina, Tennessee, Texas, Virginia and West Virginia - is scoped to the electrical, HVAC, refrigeration, plumbing or hydronics trades, so those routes belong on this site's electrical, HVAC and plumbing pages rather than here.
- Columbus (Building and Zoning Services - General Contractor registration, $25,000 bond)
- Cleveland (Department of Building & Housing - general contractor registration under Codified Ordinances ch. 3107)
- Cincinnati (Buildings & Inspections - Building Construction Contractor registration)
- Akron (Engineering Bureau - contractor registration for any permitted work)
- Summit County (Department of Building Standards - permit-based contractor process; issues Akron's building permits)
- Toledo (Division of Building Inspection - trade and remodeling licenses only; no general building contractor license)
- Dayton (Division of Building Inspection - trade contractor registration only)
- Cuyahoga County (Division of Building Standards - contractor registration for partner communities)
Common questions
- Do I have to take the Mississippi general contractor exam if I'm licensed in Ohio?
- Yes. Mississippi requires the trade exam on this path, plus a law or code exam.
- What does it cost to get a Mississippi general contractor license from Ohio?
- Published fees on this path total $520, not counting exam vendor fees or bonds.
- Do my Ohio work hours count in Mississippi?
- No. Mississippi does not credit out-of-state hours on this path.
- Does it work the other way, from Mississippi to Ohio?
- Not necessarily. Reciprocity is directed. Going from Mississippi to Ohio, the mechanism is not applicable.
Sources
- Mississippi State Board of Contractors - Classifications (Building Construction; Residential Builder; Residential Remodeler) · Miss. Code Ann. 31-3-13(h) (cited on the page) · Mississippi State Board of Contractors · Agency Page · verified September 17, 2026
- MSBOC Commercial Application for a Certificate of Responsibility (2026 revision) · Mississippi State Board of Contractors · Form · verified September 17, 2026
- Mississippi Commercial Contractor Laws and Rules (Miss. Code Title 31 Chapter 3 and Board Rules Part 802) · Miss. Code Ann. 31-3-1, 31-3-13, 31-3-15, 31-3-17; 30 Miss. Admin. Code Pt. 802, R. 1.1 · Mississippi State Board of Contractors · Admin Rule · verified September 17, 2026
- Mississippi State Board of Contractors - Frequently Asked Questions · Mississippi State Board of Contractors · Faq · verified September 17, 2026
- MSBOC Fee Schedule effective January 1, 2016 · Mississippi State Board of Contractors · Form · verified September 17, 2026
- Mississippi State Board of Contractors - Apply for a License (commercial and residential) · Mississippi State Board of Contractors · Agency Page · verified September 17, 2026
- State of Mississippi Contractor Examinations - PSI Candidate Information Bulletin · PSI Services LLC for the Mississippi State Board of Contractors · Other · verified September 17, 2026
- MSBOC Reciprocity Information and Verification of Licensure form (revised 07/2025) · Mississippi State Board of Contractors · Agreement Document · verified September 17, 2026
- Mississippi State Board of Contractors - Reciprocity (trade-exam waiver agreements by origin board) · Miss. Code Ann. 73-50-1 and 73-50-2 (referenced on the page) · Mississippi State Board of Contractors · Agency Page · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.