LicensebyState

Ohio to North Dakota: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 4 sources

Ohio does not issue a statewide general contractor license, so there is nothing to transfer. Here is North Dakota's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Contractor license for every applicant, wherever they come from (all states)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

An unlimited or general contractor license from another state gives an applicant no advantage in North Dakota, and none is needed. Whatever the size of the project, North Dakota asks for a sworn application naming the class of license sought, a signed statement of the applicant's experience and qualifications, a certificate of liability insurance with the Secretary of State named as certificate holder, a Workforce Safety and Insurance certificate of payment or letter of good standing, and the class fee, which is $450 for class A with no limit on project value. Because there is no trade examination, no business and law examination, no experience threshold, no bond and no financial responsibility test, there is nothing for an out-of-state credential to be measured against or to replace. A contractor based in another state applies on the same terms as a resident and does not have to move here, but a nonresident appoints the registrar as their agent for service of process by signing the application unless they are already registered here as a foreign corporation, limited liability company or partnership with a registered agent on file. The Secretary of State publishes no reciprocity agreement and no endorsement route for the contractor license.

The class letters are a contract-value cap and not a skill grading, so they are chosen rather than earned: class A is unlimited, class B stops at $500,000, class C at $300,000 and class D at $100,000 for any single contract project, and a contractor may renew under a different class by paying that class's issue fee. On public work the class matters at the bid: a contract may not be awarded unless the contractor holds a license in the class the project's value falls within, the license must have been held at least ten days before the date set for receiving bids, and a copy of the license or current-year certificate goes in the bid bond envelope or the bid is returned unread. Bids to the Department of Transportation and the Public Service Commission, and federal-aid highway work, are outside that rule, and a public contract also needs a tax commissioner certificate showing no delinquent income, sales or use taxes. Two apparent routes are dead ends. The word reciprocal appears once in the contractor chapter, at NDCC 43-07-22, and it lets the labor commissioner make arrangements with another state about the North Dakota resident hiring preference on public construction contracts, not about licensure. And North Dakota does not accept the NASCLA Accredited Examination for Commercial General Building Contractors and is not among the participating agencies, which follows from there being no North Dakota contractor examination for it to replace.

At a glance

Trade exam
Waived
Law / code exam
Not required
Out-of-state hours
Do not count

What you must already have

  • No examination, minimum experience, work history review, education, continuing education, financial statement or qualifying party is required, however large the project. The class letter caps the value of a single contract project and is chosen on the application; class A carries no limit at all.NDCC 43-07-04(1) sets out the complete application contents and NDCC 43-07-07(1) sets the class limits. The Secretary of State's contractor page prints the same list and adds no examination, bond, net worth figure or responsible managing individual. The old classes-of-licenses section, 43-07-05, was repealed in 2015.
  • The applicant must be eighteen or older and must sign the application under oath, including a statement of their own experience and qualifications as a contractor and the class of license sought. North Dakota sets no threshold for that experience and does not check it against another state's license or classification.NDCC 43-07-04(1). Out-of-state experience is described in that statement like any other experience; the registrar may deny a license where an application contains false or misleading information, so it should be described accurately.
  • You must have no disciplinary action or unresolved complaints on your record.NDCC 43-07-04.1, with the rehabilitation test in NDCC 12.1-33-02.1 and a right of appeal to district court. Discipline under NDCC 43-07-15 runs to a civil penalty of up to $1,000, restitution of up to $5,000 and suspension of up to sixty months, and any penalty or restitution must be paid before a license is renewed, reinstated or newly issued.

What you'll do to get licensed in North Dakota

  1. 1Application fee. Pay the application fee ($450). License fee for a class A license, which carries no limitation on the value of any single contract project. The other classes are cheaper because they are capped: class B $300 up to $500,000 per job, class C $225 up to $300,000 per job and class D $100 up to $100,000 per job. Renewal is $90 for class A and $60, $45 or $30 for classes B, C and D. A contractor may apply at renewal for a different class than the one previously held by paying the issue fee for the new class. A name change costs $10 and must be reported to the registrar within ten days..
  2. 2Insurance. Carry the required insurance. Certificate of liability insurance filed with the application, issued in the same name the contractor license is requested in and listing the North Dakota Secretary of State, 600 E Boulevard Ave, Dept 108, Bismarck, ND 58505, as the certificate holder. No minimum policy limit is set in the statute or published on the Secretary of State's page, so the state does not publish one; ask the Secretary of State on 701-328-2900 or 800-352-0867 what its reviewers accept, and expect owners, lenders and construction managers on commercial work to require far higher limits by contract. Coverage must be maintained and refiled at renewal; failing to maintain it puts the license out of good standing and leads to revocation if it is not cured within thirty days..
  3. 3Insurance. Carry the required insurance. Workforce Safety and Insurance coverage, evidenced by a statement from WSI that coverage satisfactory to WSI has been secured. A contractor with employees residing in North Dakota files a current WSI certificate of payment; a contractor with no North Dakota resident employees who does not meet the tests of significant contact files a WSI letter of good standing instead. At renewal the contractor certifies that all payroll taxes, including North Dakota income tax, WSI premiums and unemployment insurance premiums due at the time of renewal have been submitted..
  4. 4Business license. Obtain a business license. Business registration with the Secretary of State, completed before the license application because the name on the application must match the business registration. A corporation, limited liability company or other entity must register, an out-of-state company registers as a foreign corporation, LLC, LLP or limited partnership, and a sole proprietor or general partnership may need a trade name or fictitious partnership name registration. Letting any of those registrations lapse is a listed ground for the registrar to classify the contractor license as not in good standing, which requires the contractor to stop soliciting or entering new projects and leads to revocation if it is not cured within thirty days..
  5. 5Financial responsibility. Show financial responsibility (if applicable). North Dakota requires no financial statement, net worth figure, working capital figure or credit report for a contractor license at any class, including class A. The class letter is a cap on the value of a single contract project that the applicant selects and pays for, not a financial qualification the registrar assesses. Public owners may impose their own financial and prequalification conditions on top of the license: any administrative or governing body with power to enter public contracts may set reasonable additional requirements as a condition of awarding a public works contract..
  6. 6Background check. Complete a background check (if applicable). Not part of the standard filing. The registrar may require any other information needed to determine eligibility to act as a contractor, expressly including criminal history record information about the applicant or the officers, members or partners of a business applicant, held by the North Dakota Bureau of Criminal Investigation or a similar agency in another state, at the applicant's expense. Failing or refusing to authorize or pay for that information is a ground to refuse the license..
  7. 7Surety bond. Post a surety bond (if applicable). No surety bond is required for the contractor license itself; the bond section of the contractor statute was repealed in 1995. Bonding is still a fact of commercial life in North Dakota: a bid for a public contract project must enclose a copy of the license in the bid bond envelope, public owners may impose their own bonding conditions, and private owners and lenders commonly require performance and payment bonds by contract..
  8. 8Other. Ongoing obligations once licensed. The license number must be supplied to the permit-issuing official on every building permit application. A public contract with the state or any political subdivision additionally requires a certificate from the tax commissioner showing no delinquent income, sales or use taxes. The license runs to the end of the contractor year on March 1 and is renewed by filing a list of every project, contract or subcontract over $50,000 completed in North Dakota in the preceding calendar year, the nature of that work, a current liability insurance certificate and the payroll tax certification, with the renewal fee; that project list is forwarded to the state tax commissioner. Missing the March 1 deadline leaves the contractor unlicensed until they renew, which is possible until June 1 on payment of a $50 penalty plus the renewal fee, after which the license is expired..

Published fees on this path total $450, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance
  • Insurance

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · if applicable

How North Dakota licenses general contractors

North Dakota general contractor · “Contractor License, class A (no limit on project value) through class D

Statewide license

Verified September 17, 2026· 3 sources

Issued by North Dakota Secretary of State (Registrar of Contractors)

North Dakota has one contractor license for every kind of building work, issued by the Secretary of State as registrar of contractors, and it is the same license a homebuilder holds: the difference between a commercial general contractor and a residential builder here is the class letter they choose, not a different credential. A license is required of anyone whose job exceeds $4,000 in cost, value or price, including subcontractors, public contractors and nonresident contractors, and an unlicensed contractor cannot maintain a claim or lawsuit in a North Dakota court over the contracting business. The class letter caps the value of a single contract project: class A carries no limit, class B stops at $500,000, class C at $300,000 and class D at $100,000, so an unlimited or commercial builder applies for class A, and on a public contract the license must be in the class the project's value falls within and must have been held at least ten days before the bid date. There is no examination, no experience or work history review, no bond, no financial statement, no net worth or working capital test and no qualifying party or responsible managing individual: the license is issued to the individual or business that contracts, on proof of liability insurance and Workforce Safety and Insurance coverage. Electrical and plumbing work are licensed separately by the North Dakota State Electrical Board and the North Dakota State Plumbing Board, so any of that scope must be performed under the right board license.

Moving to North DakotaLeaving North Dakota

Why Ohio has nothing to transfer

Ohio general contractor · “General / building contractor registration (city-issued)

Licensed by cities and counties

Verified September 17, 2026· 20 sources

Issued by No state authority; cities and counties register commercial building contractors

Ohio has no statewide general, commercial or unlimited building contractor license, so there is nothing at state level for an out-of-state general contractor's license to transfer into and no NASCLA route to take. The Ohio Construction Industry Licensing Board licenses individual contractors in five specialty trades only - electrical, HVAC, refrigeration, plumbing and hydronics - under R.C. Chapter 4740, and its board has an electrical section, a plumbing and hydronics section and an HVAC and refrigeration section but no building section. Those five licenses are also the only ones Ohio's reciprocity agreements reach: OCILB's published partner list names Alabama, Arkansas, Kentucky, Louisiana, Mississippi, North Carolina, South Carolina, Tennessee, Texas, Virginia and West Virginia, and every entry is scoped to one or more of the five trades. Commercial building is instead controlled through city permitting, and the requirements are administrative rather than technical: Columbus registers a General Contractor on a $25,000 bond and a liability certificate with no exam, Cincinnati registers a Building Construction Contractor on insurance and workers' compensation for $131.25 a year, Cleveland requires general contractors to be bonded, insured and registered under Chapter 3107 of its Codified Ordinances, and Akron requires anyone whose work needs a permit to register. Toledo and Dayton license only the trades and have no commercial building contractor license at all, and Summit County, which issues Akron's building permits, replaced annual contractor registration with a permit-based process in 2024. None of these registrations involves a trade or business-law exam, a qualifying party, a financial statement or an experience review, and none of them recognizes another state's license, so a general contractor arriving in Ohio registers jurisdiction by jurisdiction and makes sure the electrical, HVAC, refrigeration, plumbing and hydronics scope is performed under the correct OCILB state licenses.

How local licensing works in Ohio

How local licensing works. No Ohio agency issues a general, commercial, building or unlimited contractor license, and there is no Ohio equivalent of a qualifying party, a NASCLA route or a state business-and-law exam for builders. Ohio has around 800 certified building departments, each with its own contractor rules, so identify the department with jurisdiction over the site - the Board of Building Standards map at com.ohio.gov/JurisdictionMap does this by address - and register there before bidding. One statewide rule shapes what those departments ask for: R.C. 4740.12 provides that "no political subdivision, district, or agency of the state may adopt an ordinance or rule that requires contractor registration and the assessment of a registration or license fee unless that ordinance or rule also requires any contractor who registers and pays the registration or license fee to be licensed in the contractor's trade pursuant to this chapter", which OCILB describes as requiring building and health departments with a registration program to demand the state license before issuing commercial permits.

Columbus. Building and Zoning Services registers a General Contractor under Chapter 4114 of the Columbus Building Code. The registration "can be associated with all permits to build new 1, 2, or 3 family, multi-family (4 or more dwelling units), and commercial structures, as well as alter or add to existing multi-family and commercial structures." The filing is a notarized application, "a Bond in the amount of $25,000" on the city's own bond form under C.C. 4114.515, and a certificate of liability insurance with "limits of liability no less than $300,000.00 for damages to a single person and $500,000.00 for one occurrence", naming Building and Zoning Services as certificate holder. There is no exam, experience, reference or financial requirement, and no board hearing - the General Contractor registration is one of the few Columbus categories that does not go before a review board. The 2026 fee schedule sets a $350 annual contractor license and registration fee, with $100 for a change of assignment or elective suspension; the registration runs to "the end of the twelfth month from the date of issuance." 111 North Front Street, (614) 645-7433, [email protected].

Cleveland. The Department of Building & Housing requires that contractors "must be bonded, insured, and registered" and that "contractors must be registered with the City of Cleveland within their trade in order to obtain permits. Separate permits are required for each separate trade, i.e. general, plumbing, HVAC, electrical, and elevator." Registration sits in Chapter 3107 of the Codified Ordinances, Registration of Contractors, which provides for a Certificate of Registration and a Limited Certificate of Registration with separate qualifications for each. A General Contractor Registration Application package is published in the Contractor Packages section of the city's construction permitting resources page, and the bond, insurance and fee figures are stated in that package and in Chapter 3107 rather than on the department's web pages - confirm them with Building & Housing on 216-664-2910 before filing. Registration status is verified on 216-664-2884, and electrical, plumbing and HVAC registrations require the OCILB state license first.

Cincinnati. Buildings & Inspections registers contractors under Chapter 1106 of the Municipal Code, and commercial builders fall in the Building Construction Contractor class, the catch-all that "will apply to all other contractors that are not addressed in the two previous descriptions" and covers specialties such as crane operations, demolition, carpentry, masonry and glazing alongside new one-, two- and three-family construction. Electrical, plumbing, HVAC, hydronic and refrigeration firms register in the separate OCILB Licensed Specialty Contractor class on their state licenses, and that city registration runs to the state license's expiry date. The filing is the signed application, liability insurance with "minimum liability limits of one hundred thousand dollars ($100,000) for damages to a single person, and three hundred thousand dollars ($300,000) for one (1) occurrence" (crane operators carry $1,000,000 per occurrence, $2,000,000 aggregate and a $4,000,000 or $10,000,000 umbrella depending on lift capacity), proof of Ohio workers' compensation, an assignment form listing everyone authorized to sign permit applications, and a federal tax ID. The fee is $125.00 plus surcharges, $131.25 a year, for up to three years; same-day processing is $208 extra. There is no exam and no bond. A company operating under more than one business name needs a separate registration for each legal entity, and where a company holds several OCILB licenses through different people, each license holder registers separately. 805 Central Avenue, Suite 500, (513) 352-3271.

Akron and Summit County. Akron requires "all contractors regardless of trade to register as a contractor if the work they are performing requires a permit to do the work", on a contractor registration application with an Akron Tax Registration Number, a certificate of liability insurance, state licenses where the trade needs one, and workers' compensation coverage unless there are no employees. No exam or fee is published. Ohio Building Code permits for Akron projects come from the Summit County Department of Building Standards, which since March 2024 has run "a permit-based process" in place of annual contractor registration: "the $135 annual fee for contractors and the requirement for a $10,000 bond are now eliminated", while "contractors will still be required to provide liability insurance, State license if applicable, and a Tax ID Number", and commercial application fees rose by $10. Akron Plans & Permits, 1030 E. Tallmadge Ave., 330-375-2010; Summit County Building Standards, same address, 330-630-7280.

Toledo. Toledo licenses Electrical, Mechanical, Plumbing, Fire, Home Improvement and Remodeling, Sign and Sidewalk contractors, plus journeymen and apprentices in the electrical, HVAC, plumbing and refrigeration trades. There is no commercial or general building contractor license, so a commercial builder in Toledo pulls permits without a city contractor credential while the trades hold theirs. All Toledo licenses renew annually and expire December 31. Division of Building Inspection, One Government Center, Suite 1600, 419-245-1220.

Dayton. The Division of Building Inspection publishes registration and bond forms only for electrical, plumbing, warm air heating and pipe-laying contractors. Dayton has no general or building contractor registration; a commercial builder works through the registered trades. Building Inspection, 937-333-3979; One Stop Center, 371 West Second Street, 937-333-3883.

Cuyahoga County. A Division of Building Standards was created in 2025 to serve partner communities with contractor registration, plan review, permitting and inspections, with registration "completed through a secure online portal" on its site. The partner community list is still being announced and "an approved fee schedule will be released by December 1, 2026", so check the state's building department look-up tool for a specific address before assuming which department has jurisdiction. [email protected].

What does and does not travel. An out-of-state general contractor license, a NASCLA Accredited Examination and out-of-state project experience carry no weight in any of these jurisdictions, because none of them tests or qualifies commercial builders at all. What does matter is holding, or employing someone who holds, the OCILB license for each of the five state-licensed trades in scope, then registering that license with the city as well. OCILB's own reciprocity list is the only place an out-of-state license shortens the path, and every entry on it - Alabama, Arkansas, Kentucky, Louisiana, Mississippi, North Carolina, South Carolina, Tennessee, Texas, Virginia and West Virginia - is scoped to the electrical, HVAC, refrigeration, plumbing or hydronics trades, so those routes belong on this site's electrical, HVAC and plumbing pages rather than here.

Moving to OhioLeaving Ohio

Common questions

Do I have to take the North Dakota general contractor exam if I'm licensed in Ohio?
No. The trade exam is waived on this path.
What does it cost to get a North Dakota general contractor license from Ohio?
Published fees on this path total $450, not counting exam vendor fees or bonds.
Do my Ohio work hours count in North Dakota?
No. North Dakota does not credit out-of-state hours on this path.
Does it work the other way, from North Dakota to Ohio?
Not necessarily. Reciprocity is directed. Going from North Dakota to Ohio, the mechanism is not applicable.

Sources

  1. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
  2. North Dakota Century Code Chapter 43-07 - Contractors · NDCC 43-07-01, 43-07-02, 43-07-04, 43-07-04.1, 43-07-07, 43-07-08, 43-07-09, 43-07-10, 43-07-11, 43-07-12, 43-07-19, 43-07-22, 43-07-24 · North Dakota Legislative Branch · Statute · verified September 17, 2026
  3. North Dakota State Electrical Board - Home (license types and reciprocal license agreements) · North Dakota State Electrical Board · Agency Page · verified September 17, 2026
  4. North Dakota Secretary of State - Contractors (licensing, classes, fees and renewal) · NDCC ch. 43-07 · North Dakota Secretary of State · Agency Page · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related