Oklahoma to Florida: general contractor license reciprocity
Oklahoma does not issue a statewide general contractor license, so there is nothing to transfer. Here is Florida's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Certification by endorsement, including the NASCLA Accredited Examination route
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Florida accepts the NASCLA Accredited Examination for Commercial General Building Contractors in place of its own trade knowledge parts. The Board's reciprocity notice states that the NASCLA General Contractors Exam from 2009 forward 'is substantially similar to all Florida Division 1 license trade knowledge exams', and Form DBPR CILB 10 tells NASCLA applicants to apply under Option A, where the official score report and the Examination Evaluation Questionnaire are not required; the NASCLA transcript is released to the Board instead. NASCLA applicants must still pass the Florida Business and Finance examination, attest to having passed an examination covering the Florida Building Code, and complete the experience section of the application. An applicant without the NASCLA credential uses the same $350 form under Option A with another examination the Board finds substantially equivalent (a comparison the form calls 'very stringent and rarely approved'), Option B for a license whose issuance criteria were substantially equivalent, or Option C for the same or a similar license held at least 10 years and active now or within the last 2 years, which adds a board-approved 2-hour Florida Building Code course. Applicants who are not approved for a waiver register with Professional Testing and sit the three Division 1 parts through Pearson VUE.
The trade parts are waived on the NASCLA route, on an accepted equivalence under Option A or B, and under the 10-year provision in Option C; applicants outside those routes sit the Florida Contract Administration and Project Management examinations. The Business and Finance exam is never waived. The Board does not publish a processing time for endorsement applications; the Customer Contact Center is 850-487-1395.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must have passed a licensing exam in Oklahoma that the destination considers comparable.The NASCLA Accredited Examination for Commercial General Building Contractors (NASCLA General Contractors Exam, 2009 forward) is the route the Board names: applicants select Option A on Form DBPR CILB 10, skip the score report and Examination Evaluation Questionnaire, and have the NASCLA transcript released to the Board. The same option is open to any other national, regional, state or territorial licensing examination the Board finds substantially equivalent, evidenced by an official score report and an Examination Evaluation Questionnaire completed by the origin exam provider.
- Your Oklahoma license must be active and in good standing.
- You must have held your Oklahoma license for at least 10 years.Option C only: the same or a similar contracting license held for at least 10 years before the date of application, currently active or active within the last 2 years
- Experience under s. 489.111(2): four years as a worker or foreman with at least one year as a foreman, or a four-year construction-related degree plus one year, or the published college-credit combinationsCertified General Contractor applicants must additionally show experience in four or more of the listed experience areas and at least one year of experience on the construction of structures four stories or higher, under Rule 61G4-15.001(2). Experience earned in another state counts and is documented with a full employment and project history.
What you'll do to get licensed in Florida
- 1Application fee. Pay the application fee ($350). Form DBPR CILB 10 certification by endorsement application fee.
- 2Law / code exam. Pass a law, rules, or code exam. Florida Business and Finance examination through Pearson VUE; it is not waived on any endorsement option, including the NASCLA route.
- 3Trade exam. Pass the destination's trade exam (if applicable). Florida Division 1 Contract Administration and Project Management examinations, required only for applicants who do not qualify through the NASCLA examination, an accepted equivalence or the 10-year provision.
- 4Other. Examination covering the Florida Building Code: NASCLA applicants attest on the application to having passed one, and applicants using the 10-year endorsement option provide proof of a board-approved 2-hour Florida Building Code course including wind mitigation techniques.
- 5Exam fee. Pay the exam fee ($135). Professional Testing, Inc. registration fee, charged each time a registration is made for any exam part.
- 6Exam fee. Pay the exam fee ($80). Pearson VUE administration fee for the Business and Finance computer-based test (Contract Administration and Project Management are $40 each).
- 7License fee. Pay the license or certificate fee ($200). Initial certification fee under Rule 61G4-12.009, reduced to $100 if the application is submitted in the second year of the biennium; biennial renewal is also $200.
- 8Business license. Obtain a business license ($50) (if applicable). Application or renewal fee for each business organization the certificate holder qualifies, filed on Form CILB 6-A.
- 9Background check. Complete a background check. Electronic fingerprints for the criminal history check required by s. 489.115, F.S..
- 10Financial responsibility. Show financial responsibility. A credit report from a nationally recognized agency showing a FICO-derived score and a public records statement checked at local, state and federal levels, with no unsatisfied judgments or liens; a score below 660 must be offset with a Board-approved 14-hour financial responsibility course. A business credit report is required as well when qualifying a business. The Board publishes no minimum net worth or working capital figure: Rule 61G4-15.006 sets none, and s. 489.115(5)(b) only caps what the Board could require at $20,000 for Division I. Ask the Customer Contact Center at 850-487-1395 before assuming a dollar threshold applies..
- 11Insurance. Carry the required insurance. Public liability insurance of $300,000 and property damage insurance of $50,000 for General and Building Contractors, plus workers' compensation coverage or a filed exemption.
- 12Continuing education. Complete continuing education (if applicable). 14 hours of continuing education each renewal cycle, with mandatory hours in workplace safety, workers' compensation, business practices, building code and laws and rules. Certified licenses expire August 31 of every even-numbered year..
Published fees on this path total $765, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam · if applicable
- Exam fee · $135
- Exam fee · $80
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Other
- Continuing education · if applicable
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license · $50 · if applicable
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
How Florida licenses general contractors
Florida general contractor · “Certified General Contractor (CG)”
State license plus local requirements
Issued by Florida Construction Industry Licensing Board (Department of Business and Professional Regulation)
Florida's unlimited tier is the Certified General Contractor (occupation code CG), issued by the Construction Industry Licensing Board within DBPR. Section 489.105(3)(a), F.S. describes it as a contractor 'whose services are unlimited as to the type of work which he or she may do', subject only to the trade-license carve-outs in s. 489.113. Between residential and general sits the Certified Building Contractor (CB), limited to commercial buildings and residential buildings of not more than three stories, plus remodeling of any size building where the work does not affect structural members; General, Building and Residential together make up the Board's Division I. As at every level, a certified contractor holds a department certificate of competency good in any Florida jurisdiction, while a registered contractor (RG) has satisfied a county or city competency board and may contract only in those jurisdictions. The license is held by the individual who qualifies on experience and examination; qualifying a business organization is a separate application, so a contractor moving to Florida is licensed personally first. The practical difference between the General and Building classes for an arriving applicant is the four-story rule: a Certified General Contractor must document at least one year of experience on the construction of structures at least four stories in height.
How local licensing works in Florida
Why this level is Hybrid. Sections 489.105(8) and (10), F.S. create two tracks that both run through DBPR: state certification, valid statewide, and state registration of contractors who met a local jurisdiction's competency requirements, valid only in those jurisdictions. That is why the Board's application list pairs CG with RG, CB with RB and CR with RR. An arriving contractor who obtains the certified license never needs a local competency card, though local building departments still issue permits and may require registration of the state license.
Miami-Dade County. The Construction Trades Qualifying Board licenses Building and Building Specialties contractors, among other trades, under Chapter 10 of the county code. It reciprocates only with Broward and Palm Beach counties in specific trade categories (75 percent on journeyman exams, 70 percent on other reciprocal category exams) and offers state-certified contractors a voluntary registration that speeds permitting in unincorporated Miami-Dade by pre-verifying license status and insurance.
Broward County. The Building Code Division's Central Examining Boards issue Certificates of Competency; the applications, the examining board calendar and the list of mandatory and voluntary certifications are published in the county's contractor packet (954-765-4400 x9876).
Out-of-state applicants. The county programs reviewed publish no rule recognizing an out-of-state contractor license. The state routes, Form CILB 32 for reciprocity and Form CILB 10 for endorsement, are the ones that produce a statewide license.
Why Oklahoma has nothing to transfer
Oklahoma general contractor · “General or commercial building contractor license or registration (city-issued)”
Licensed by cities and counties
Issued by No state authority for building contractors; cities register general and commercial builders
Oklahoma has no statewide general, commercial or unlimited building contractor license, and the Construction Industries Board publishes that finding itself: "General Contractors are not currently required to have a state license in Oklahoma for general contracting", with the rider that trade licenses and registrations are still required for licensed trade work and that local jurisdictions should be contacted for local requirements. The CIB regulates plumbing, electrical, mechanical, roofing, building and construction inspectors, and home inspectors, and nothing else; the Oklahoma Uniform Building Code Commission adopts the statewide building codes that local departments enforce. The one statewide credential a general contractor may still need in its own right is the CIB roofing contractor registration, which reaches resident and non-resident contractors alike and carries a commercial endorsement with a PSI examination, a $230 initial fee and $1,000,000 of liability insurance for commercial roofing. Commercial building itself is a city matter and the requirements are administrative. Edmond states that "a general building contractor's license is required for permit submittal" and issues one on an email filing, Broken Arrow registers general contractors on a $50,000 liability certificate and a workers' compensation filing, and Tulsa registers contractor accounts by trade with an insurance undertaking. Oklahoma City is the notable gap: its only building category is Building Contractor (Residential Only), so a commercial builder there registers no general credential at all, and Norman licenses only trade, sign and structure moving contractors. None of these carries a trade or business-law exam, a bond, a qualifying party or a financial statement, and there is no NASCLA route because Oklahoma has no state board to accept one.
How local licensing works in Oklahoma
How local licensing works. No Oklahoma agency licenses general or commercial building contractors, so there is no state application to file, no state qualifying party and no state examination. The Construction Industries Board's own FAQ puts it plainly - "General Contractors are not currently required to have a state license in Oklahoma" - and directs contractors to check "the jurisdiction in which you are interested in performing construction related work", noting that other agencies such as the Corporation Commission, the Oklahoma Department of Labor and the Oklahoma Liquefied Petroleum Gas Board license other construction-related areas. Statewide commercial and residential building codes come from the Oklahoma Uniform Building Code Commission and are enforced locally.
Roofing, and only roofing, is a statewide registration. A commercial builder self-performing roofing needs a CIB roofing contractor registration plus a commercial endorsement. The registration is $75 initially and annually, needs at least $500,000 of general liability insurance naming the board as certificate holder, workers' compensation coverage or exemption, Secretary of State business-name registration, entity documents and an affidavit of lawful presence, and runs through a qualifying party who is an owner, officer, member or general partner actively engaged in the work. The commercial endorsement costs $230 initially and $100 to renew, requires a roofing registration in good standing first, raises the liability minimum to $1,000,000, and requires a PSI examination once the application is approved. Commercial roofers also complete four hours of approved continuing education every 36 months. Registration is non-transferable and applies to non-resident contractors as much as to Oklahoma firms.
Oklahoma City. There is no general or commercial building registration. The city's contractor registration categories are Boiler, Building Contractor (Residential Only), Electrical, Fence, House Moving, Insulation, Mechanical, Plumbing, Prequalified Contractor and Sidewalk Contractor (both through Public Works), and Sign. A commercial builder pulls permits without a city contractor credential, while the electrical, mechanical and plumbing scope goes to contractors registered on current CIB state licenses and boiler work to a contractor licensed by the Oklahoma Department of Labor. Prequalification through Public Works is a procurement matter for city contracts rather than a building credential. Development Services, 420 W. Main St., (405) 297-2525.
Tulsa. The Permit Center "registers the licenses of trade contractors" and issues trade permits; the city's guide to doing business states that "in Oklahoma there is no general license required to start or own a business or to operate as a general contractor" and that the state-licensed trades - electrical, fire, mechanical and plumbing - "must then register with the City of Tulsa." Registration is an account filing on the Account Information and Contractor Registration form, whose trade checkboxes include Building alongside the state-licensed trades, demolition, house moving, fire protection systems, and sidewalk, driveway and paving cut work; the last of those "requires an Annual Contractor's Contract with City of Tulsa." The state control number is requested only "if applicable", and the substantive undertaking is to carry general liability insurance naming the City of Tulsa as an additional insured with 30 days' written notice of cancellation. Stationary engineers are the one credential Tulsa tests itself, on a certificate of competency. Pre-development meetings cost $350 for the Infrastructure Development Process route and $350 for the Code Compliance route, each credited against later fees. Permit Center, 175 E. 2nd Street, 4th Floor, (918) 596-9456; fee ordinance Title 49.
Norman. Norman licenses trade contractors, sign contractors and structure movers and nothing else. A Trade Contractor license for electrical, mechanical or plumbing work requires a current active CIB state license, shown active on the CIB website, plus photo ID, renewed annually by 31 March. A Sign Contractor license requires a $2,000 surety bond or certificate of deposit on the city's bond form. A Structure Moving license requires casualty insurance of at least $100,000 and proof of unified carrier registration or an intrastate license. There is no general or commercial building contractor license, so a commercial builder works through the online permitting portal and the licensed trades. Development Services, (405) 366-5339.
Broken Arrow. The Community Permitting and Licensing Division issues residential and commercial building permits and registers contractors through the Citizen Self Service portal. The General Contractor Registration form requires only a current general liability insurance certificate with the business name and address, the City of Broken Arrow named as certificate holder and minimum $50,000 coverage; a current workers' compensation certificate or an Affidavit of Exemption from the Oklahoma Workers' Compensation Commission; the city named as certificate holder on every certificate; and a copy of the contractor's driver's license. No exam, bond, experience or state license is required, and no fee is printed on the form, so confirm the amount with the division. 220 S. First Street, 918-259-2400 ext. 2359.
Edmond. Building & Fire Code Services states that "a general building contractor's license is required for permit submittal" and opens a new one on an email giving the company name, mailing address, contact phone number and portal email. Residential building contractors hold a separate license and "must maintain current general liability and workman's compensation for permit submittal." Trade contractors "are required to hold active city and state licenses" and file their CIB license and driver's license; trade licenses expire 31 July, renew through the portal from July through August, and lapse on 1 September if unpaid. No exam, bond, experience requirement or fee is published for the general building license, so confirm what is payable before submitting. 22 E. Main Street, Edmond, (405) 359-4780, permits.edmondok.gov.
What does and does not travel. An out-of-state general contractor license, a NASCLA Accredited Examination and out-of-state project experience carry no weight anywhere in Oklahoma, because no Oklahoma authority tests or qualifies commercial builders and Oklahoma is not a NASCLA participating state. What does travel is the CIB credential set: the roofing contractor registration, which the Roofing Contractor Registration Act applies to non-resident contractors by name, and the plumbing, electrical and mechanical licenses that several of the cities above demand before they will register a trade contractor. Those routes, including the board's published arrangements with other states, belong on this site's plumbing, electrical and HVAC pages rather than here.
- Oklahoma City (Development Services - residential-only building registration; no general or commercial category)
- Tulsa (Development Services Permit Center - contractor account and trade registration)
- Norman (Development Services - trade, sign and structure moving licenses only)
- Broken Arrow (Community Permitting and Licensing - General Contractor Registration)
- Edmond (Building & Fire Code Services - general building contractor license)
Common questions
- Do I have to take the Florida general contractor exam if I'm licensed in Oklahoma?
- The trade exam is waived, but Florida requires a law or code exam.
- How long do I need to have held my Oklahoma license?
- At least 10 years before applying.
- What does it cost to get a Florida general contractor license from Oklahoma?
- Published fees on this path total $765, not counting exam vendor fees or bonds.
- Do my Oklahoma work hours count in Florida?
- Yes. Documented out-of-state experience counts toward Florida's eligibility requirements.
- Does it work the other way, from Florida to Oklahoma?
- Not necessarily. Reciprocity is directed. Going from Florida to Oklahoma, the mechanism is not applicable.
Sources
- Broward County Building Code Division - Get a License (Central Examining Boards) · Broward County Building Code Division · Agency Page · verified September 17, 2026
- DBPR Construction Industry - Frequently Asked Questions · Florida Department of Business and Professional Regulation · Faq · verified September 17, 2026
- DBPR - Construction Industry Licensing Board (CILB) home page · Florida Department of Business and Professional Regulation · Agency Page · verified September 17, 2026
- CILB Reciprocity list (states with reciprocal licensing agreements) · Fla. Stat. § 489.115(3)(c) · Florida Construction Industry Licensing Board · Agreement Document · verified September 17, 2026
- Form DBPR CILB 10 - Application for Certification by Endorsement (Eff. June 2024) · Fla. Stat. § 489.115(3); Rule 61-35.010, F.A.C. · Florida Department of Business and Professional Regulation · Form · verified September 17, 2026
- Form DBPR CILB 32 - Application for Certification by Reciprocity (Eff. July 2024) · Fla. Stat. § 489.115(3)(c); Rule 61-35.010, F.A.C. · Florida Department of Business and Professional Regulation · Form · verified September 17, 2026
- DBPR Bureau of Education & Testing - Florida State Construction Examination Registration Instructions and Application 2026 (Professional Testing, Inc.) · Rule 61G4-16, F.A.C. · Florida Department of Business and Professional Regulation / Professional Testing, Inc. · Form · verified September 17, 2026
- Miami-Dade County - Contractors & Building Trades (Construction Trades Qualifying Board) · Miami-Dade County Department of Regulatory and Economic Resources · Agency Page · verified September 17, 2026
- Rule 61G4-12.009, F.A.C. - Fees · Rule 61G4-12.009, F.A.C. · Florida Construction Industry Licensing Board · Admin Rule · verified September 17, 2026
- Rule 61G4-15.006, F.A.C. - Financial Responsibility and Financial Stability, Grounds for Denial · Rule 61G4-15.006, F.A.C. · Florida Construction Industry Licensing Board · Admin Rule · verified September 17, 2026
- Florida Statutes s. 489.105 - Definitions (Part I, Construction Contracting) · Fla. Stat. § 489.105(3)(a)-(c), (8), (10) · Florida Legislature · Statute · verified September 17, 2026
- Florida Statutes s. 489.111 - Licensure by examination · Fla. Stat. § 489.111(2) · Florida Legislature · Statute · verified September 17, 2026
- Florida Statutes s. 489.115 - Certification and registration; endorsement; reciprocity · Fla. Stat. § 489.115(3), (5) · Florida Legislature · Statute · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.