LicensebyState

Oklahoma to New Mexico: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 12 sources

Oklahoma does not issue a statewide general contractor license, so there is nothing to transfer. Here is New Mexico's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

GB-98 trade exam waived on the NASCLA Accredited Examination (every state)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

New Mexico runs no named-state contractor reciprocity: the only reciprocity the Construction Industries Division publishes is for the EE-98J electrical journeyman certificate, and holding another state's general contractor license is worth nothing on its own here. What CID does accept, from an applicant in any state, is the NASCLA Accredited Examination. Under 14.6.3.8(G)(2)(f) NMAC the bureau chief may waive the state-specific written trade exam for a Qualifying Party who passed the NASCLA general construction accredited examination, and CID's own Qualifying Party application limits that waiver to the GB-98 and EE-98 classifications, so at this level a NASCLA pass replaces the two-part GB-98 exam. Three things come with it: the candidate must have used the NASCLA scores to obtain a license in another state and held that license for at least a year, must attach a letter of good standing from that state, and must release the NASCLA transcript to New Mexico from the NASCLA website rather than sending a copy. Nothing else is waived. The four years (8,000 hours) of foreman-level experience, at least two of them commercial, must still be documented on notarized affidavits, the Business and Law exam or approved course still applies, and the company still files the bond, the tax registration certificate and the entity paperwork. An applicant without a NASCLA pass simply sits the GB-98 exam.

The rule says the bureau chief 'may waive' the trade exam, and CID verifies the NASCLA transcript itself after PSI accepts the application and the experience; if CID denies the waiver the applicant is contacted and registered for the full exam sequence, so do not stop studying while the transcript is being checked. The NASCLA waiver is not open at the GB-2 residential level. Out-of-state experience counts in full toward the 8,000 hours where it was gained working for a contractor licensed in the trade or was legal work in the state where it was performed, and an out-of-state contractor signing the affidavit attaches a copy of their current state license; accredited training counts at one-half year per year up to half the requirement, and estimating, project management and supervision do not count as hands-on. Once PSI approves the application, all remaining requirements must be met within six months or the fees are forfeited, exam scores are good for one year, and the trade and Business and Law results must be within a year of each other. NMSA 60-13-14(C) allows the division, with the commission's consent, to enter reciprocal licensing agreements with states having equivalent requirements; no such agreement covering a building classification has been published, so ask the Construction Industries Division before assuming one exists.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • You must have passed a licensing exam in Oklahoma that the destination considers comparable.14.6.3.8(G)(2)(f) NMAC lets the bureau chief waive the state-specific written trade exam for a Qualifying Party who passed the NASCLA general construction accredited examination at the passing score, and CID's Qualifying Party application states the waiver is 'Applicable for Qualifying Party's applying for GB98 & EE98 ONLY' and that it 'removes the trade exam requirement ONLY'. The transcript must be released to New Mexico through the NASCLA website; CID verifies it directly. NASCLA is an exam credential rather than a license or an agreement between states, so it is available to a candidate from any state, and it waives no fee, bond, insurance, entity or experience requirement.
  • You must have held your Oklahoma license for at least 1 year.CID's Qualifying Party application requires that the candidate 'must have taken the exam, used scores to obtain a license in another state, and held that license for a minimum of one year'. A NASCLA pass that was never used to obtain a license, or a license held for less than a year, does not support the waiver.
  • Your Oklahoma license must be active and in good standing.
  • You must document at least 8,000 hours of qualifying work experience.Four years (8,000 hours) of foreman-level practical or related trade experience within the ten years immediately before application, of which at least two years must be commercial experience (14.6.6.9(B)(2) NMAC; NMSA 60-13-14(B)(8)). It is documented on notarized General Building Work Experience Verification affidavits, one per employer or affiant, completed by an employer, supervisor, foreman or other contractor, and the affidavit must say whether the experience was residential or commercial. The NASCLA waiver does not reduce it.
  • Experience must have been gained while employed by a contractor licensed in the trade being applied for, or be work that was legal in the state where it was performed. An out-of-state contractor certifying the experience attaches a copy of their current state license to the affidavit; where that state does not license the trade, proof that the company was active and valid is attached instead.

What you'll do to get licensed in New Mexico

  1. 1Application fee. Pay the application fee ($30). Non-refundable Qualifying Party application fee, paid to PSI with the notarized application, the work-experience affidavits and, for a NASCLA waiver, the letter of good standing from the licensing state. Complete packets go to the PSI Albuquerque office by hand or mail; faxed and emailed forms are not accepted..
  2. 2Other. Qualifying Party certificate fee, charged for each classification on the application (14.5.5.14(A) NMAC). With the $30 application fee this is the $36 the Construction Industries Division quotes for a single-classification Qualifying Party filing. ($6).
  3. 3Trade exam. Pass the destination's trade exam (if applicable). GB-98 General Building Contractor exam, required only where the NASCLA waiver is not used or is not granted. It is a two-part test administered by PSI: Part 1 is the GB-2 Residential Building Contractor paper, 80 questions in 225 minutes, and Part 2 is the commercial paper, 100 questions in 310 minutes, both open book and both needing 75% to pass. Part 2 covers sitework, concrete, masonry, carpentry, metals, roofing, associated trades, general code, plan reading and estimating, and OSHA safety against the 2021 New Mexico Commercial Building Code (14.7.2 NMAC) and the 2021 International Building Code. Both parts must be passed; a candidate who fails one part retakes only that part..
  4. 4Exam fee. Pay the exam fee ($269.06). PSI fee for the two-part GB-98 exam taken as a combination, which includes the GB-2 paper. A single part costs $134.53 as a retake. A candidate whose NASCLA waiver is approved pays no trade exam fee..
  5. 5Law / code exam. Pass a law, rules, or code exam. Contractor's Business and Law exam, required of all new Qualifying Party candidates and never waived by the NASCLA route: 50 questions, 130 minutes, open book, 75% (38 points) to pass, covering licensing requirements, estimating and bidding, business organization and financial management, tax and labor law, project management and lien law, contracts, risk management, and environment and safety. An approved Business and Law course taken with a CID-approved vendor may be completed in place of the exam, and an individual who is already an active Qualifying Party does not repeat it when adding a classification..
  6. 6Exam fee. Pay the exam fee ($68.88). PSI fee for the Business and Law exam..
  7. 7Contractor license. Hold or obtain a contractor license ($30). Non-refundable contractor license application fee paid to PSI by the business, filed with the notarized Contractor License Application, a copy of the Qualifying Party's certificate or passing score reports, and the Business and Law score or course certificate. A $6 certificate fee covering the license certificate and two wallet cards is charged with it..
  8. 8License fee. Pay the license or certificate fee ($300). Classification fee for GB-98, covering the full three-year license term on PSI's current schedule. Adding a GS specialty classification alongside it does not raise the total above $300 for the category. Late renewal costs $1 a day for the first 30 days and the equivalent of one year's fee from 30 to 90 days; after 90 days the license is cancelled and the business must reapply..
  9. 9Surety bond. Post a surety bond ($10,000). $10,000 code bond from a corporate surety authorized to transact business in New Mexico, issued in the exact name shown on the application and effective for the entire three-year license period. It is the statutory proof of responsibility, may be drawn on only to cure division-certified code violations the licensee has not corrected, and must be kept in force for the whole term; claims are limited to two years after final inspection or issuance of a certificate of occupancy. New Mexico sets no net worth, working capital or financial statement test for a contractor license..
  10. 10Insurance. Carry the required insurance. Workers' compensation coverage is required of every licensed entity, and failure to maintain it is cause for revocation of the license. A sole proprietor with no employees may be exempt; the Workers' Compensation Administration can confirm. An application is placed on hold while the applicant is out of compliance. CID does not require a general liability policy for the license itself, though owners and general contractors normally require one by contract..
  11. 11Business license. Obtain a business license. A registration certificate issued within the last twelve months by the New Mexico Taxation and Revenue Department in the exact name on the license application, plus proof of registration with the New Mexico Public Regulation Commission for a corporation or LLC, or with the Secretary of State for a limited liability partnership or limited partnership. A corporation, LLC, LP or LLP must be legally authorized to do business in New Mexico before the license issues, the proposed name must be cleared with PSI first, and each member of a joint venture must itself hold a New Mexico license..
  12. 12Background check. Complete a background check. CID reviews the application against the disqualifying felony convictions listed in 14.6.3.8(F) NMAC and may deny a license or certificate on that basis; sealed, dismissed, expunged or pardoned convictions and juvenile adjudications are not used. An application is also held where there are pending CID disciplinary actions, a workers' compensation compliance problem, a child support delinquency for the proposed Qualifying Party, or an open unlicensed-activity investigation..

Published fees on this path total $667.94, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam · if applicable
  • Exam fee · $269.06
  • Law / code exam
  • Exam fee · $68.88

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $10,000

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How New Mexico licenses general contractors

New Mexico general contractor · “GB-98 General Building Contractor

Statewide license

Verified September 17, 2026· 6 sources

Issued by New Mexico Regulation and Licensing Department, Construction Industries Division (CID), General Construction Bureau; licensing paperwork and exams handled by PSI

New Mexico's unlimited building tier is the GB-98 General Building classification issued by the Construction Industries Division: erect, alter, repair or demolish residential and commercial buildings and certain structures, including everything the GB-2 residential classification and the GF-5, GF-7 and GS specialty classifications cover, plus seal coating and striping of driveways and parking lots. There is no dollar cap on a GB-98 license, but it is a building classification rather than a universal one, so it excludes structures covered by the electrical (EE), mechanical and plumbing (MM), asphalt and concrete (GA) and fixed works (GF) classifications; the separate GA classifications run from GA-1, streets, roads and highways, through GA-98, and a GB-98 contractor may not prime a project whose major portion by dollar value falls in a GA classification or in most GF classifications. The license belongs to a business that employs or is owned by a Qualifying Party, and that individual is the one who documents the experience, passes the exams and holds a personal certificate of qualification. A GB-98 Qualifying Party needs four years (8,000 hours) of foreman-level experience within the last ten years, of which at least two years must be commercial, and must pass the two-part GB-98 exam and the Contractor's Business and Law exam or an approved course in its place. The entity files a $10,000 code bond and carries workers' compensation, and the license runs three years.

Moving to New MexicoLeaving New Mexico

Why Oklahoma has nothing to transfer

Oklahoma general contractor · “General or commercial building contractor license or registration (city-issued)

Licensed by cities and counties

Verified September 17, 2026· 14 sources

Issued by No state authority for building contractors; cities register general and commercial builders

Oklahoma has no statewide general, commercial or unlimited building contractor license, and the Construction Industries Board publishes that finding itself: "General Contractors are not currently required to have a state license in Oklahoma for general contracting", with the rider that trade licenses and registrations are still required for licensed trade work and that local jurisdictions should be contacted for local requirements. The CIB regulates plumbing, electrical, mechanical, roofing, building and construction inspectors, and home inspectors, and nothing else; the Oklahoma Uniform Building Code Commission adopts the statewide building codes that local departments enforce. The one statewide credential a general contractor may still need in its own right is the CIB roofing contractor registration, which reaches resident and non-resident contractors alike and carries a commercial endorsement with a PSI examination, a $230 initial fee and $1,000,000 of liability insurance for commercial roofing. Commercial building itself is a city matter and the requirements are administrative. Edmond states that "a general building contractor's license is required for permit submittal" and issues one on an email filing, Broken Arrow registers general contractors on a $50,000 liability certificate and a workers' compensation filing, and Tulsa registers contractor accounts by trade with an insurance undertaking. Oklahoma City is the notable gap: its only building category is Building Contractor (Residential Only), so a commercial builder there registers no general credential at all, and Norman licenses only trade, sign and structure moving contractors. None of these carries a trade or business-law exam, a bond, a qualifying party or a financial statement, and there is no NASCLA route because Oklahoma has no state board to accept one.

How local licensing works in Oklahoma

How local licensing works. No Oklahoma agency licenses general or commercial building contractors, so there is no state application to file, no state qualifying party and no state examination. The Construction Industries Board's own FAQ puts it plainly - "General Contractors are not currently required to have a state license in Oklahoma" - and directs contractors to check "the jurisdiction in which you are interested in performing construction related work", noting that other agencies such as the Corporation Commission, the Oklahoma Department of Labor and the Oklahoma Liquefied Petroleum Gas Board license other construction-related areas. Statewide commercial and residential building codes come from the Oklahoma Uniform Building Code Commission and are enforced locally.

Roofing, and only roofing, is a statewide registration. A commercial builder self-performing roofing needs a CIB roofing contractor registration plus a commercial endorsement. The registration is $75 initially and annually, needs at least $500,000 of general liability insurance naming the board as certificate holder, workers' compensation coverage or exemption, Secretary of State business-name registration, entity documents and an affidavit of lawful presence, and runs through a qualifying party who is an owner, officer, member or general partner actively engaged in the work. The commercial endorsement costs $230 initially and $100 to renew, requires a roofing registration in good standing first, raises the liability minimum to $1,000,000, and requires a PSI examination once the application is approved. Commercial roofers also complete four hours of approved continuing education every 36 months. Registration is non-transferable and applies to non-resident contractors as much as to Oklahoma firms.

Oklahoma City. There is no general or commercial building registration. The city's contractor registration categories are Boiler, Building Contractor (Residential Only), Electrical, Fence, House Moving, Insulation, Mechanical, Plumbing, Prequalified Contractor and Sidewalk Contractor (both through Public Works), and Sign. A commercial builder pulls permits without a city contractor credential, while the electrical, mechanical and plumbing scope goes to contractors registered on current CIB state licenses and boiler work to a contractor licensed by the Oklahoma Department of Labor. Prequalification through Public Works is a procurement matter for city contracts rather than a building credential. Development Services, 420 W. Main St., (405) 297-2525.

Tulsa. The Permit Center "registers the licenses of trade contractors" and issues trade permits; the city's guide to doing business states that "in Oklahoma there is no general license required to start or own a business or to operate as a general contractor" and that the state-licensed trades - electrical, fire, mechanical and plumbing - "must then register with the City of Tulsa." Registration is an account filing on the Account Information and Contractor Registration form, whose trade checkboxes include Building alongside the state-licensed trades, demolition, house moving, fire protection systems, and sidewalk, driveway and paving cut work; the last of those "requires an Annual Contractor's Contract with City of Tulsa." The state control number is requested only "if applicable", and the substantive undertaking is to carry general liability insurance naming the City of Tulsa as an additional insured with 30 days' written notice of cancellation. Stationary engineers are the one credential Tulsa tests itself, on a certificate of competency. Pre-development meetings cost $350 for the Infrastructure Development Process route and $350 for the Code Compliance route, each credited against later fees. Permit Center, 175 E. 2nd Street, 4th Floor, (918) 596-9456; fee ordinance Title 49.

Norman. Norman licenses trade contractors, sign contractors and structure movers and nothing else. A Trade Contractor license for electrical, mechanical or plumbing work requires a current active CIB state license, shown active on the CIB website, plus photo ID, renewed annually by 31 March. A Sign Contractor license requires a $2,000 surety bond or certificate of deposit on the city's bond form. A Structure Moving license requires casualty insurance of at least $100,000 and proof of unified carrier registration or an intrastate license. There is no general or commercial building contractor license, so a commercial builder works through the online permitting portal and the licensed trades. Development Services, (405) 366-5339.

Broken Arrow. The Community Permitting and Licensing Division issues residential and commercial building permits and registers contractors through the Citizen Self Service portal. The General Contractor Registration form requires only a current general liability insurance certificate with the business name and address, the City of Broken Arrow named as certificate holder and minimum $50,000 coverage; a current workers' compensation certificate or an Affidavit of Exemption from the Oklahoma Workers' Compensation Commission; the city named as certificate holder on every certificate; and a copy of the contractor's driver's license. No exam, bond, experience or state license is required, and no fee is printed on the form, so confirm the amount with the division. 220 S. First Street, 918-259-2400 ext. 2359.

Edmond. Building & Fire Code Services states that "a general building contractor's license is required for permit submittal" and opens a new one on an email giving the company name, mailing address, contact phone number and portal email. Residential building contractors hold a separate license and "must maintain current general liability and workman's compensation for permit submittal." Trade contractors "are required to hold active city and state licenses" and file their CIB license and driver's license; trade licenses expire 31 July, renew through the portal from July through August, and lapse on 1 September if unpaid. No exam, bond, experience requirement or fee is published for the general building license, so confirm what is payable before submitting. 22 E. Main Street, Edmond, (405) 359-4780, permits.edmondok.gov.

What does and does not travel. An out-of-state general contractor license, a NASCLA Accredited Examination and out-of-state project experience carry no weight anywhere in Oklahoma, because no Oklahoma authority tests or qualifies commercial builders and Oklahoma is not a NASCLA participating state. What does travel is the CIB credential set: the roofing contractor registration, which the Roofing Contractor Registration Act applies to non-resident contractors by name, and the plumbing, electrical and mechanical licenses that several of the cities above demand before they will register a trade contractor. Those routes, including the board's published arrangements with other states, belong on this site's plumbing, electrical and HVAC pages rather than here.

Moving to OklahomaLeaving Oklahoma

Common questions

Do I have to take the New Mexico general contractor exam if I'm licensed in Oklahoma?
The trade exam is waived, but New Mexico requires a law or code exam.
How long do I need to have held my Oklahoma license?
At least 1 year before applying.
What does it cost to get a New Mexico general contractor license from Oklahoma?
Published fees on this path total $667.94, not counting exam vendor fees or bonds.
Do my Oklahoma work hours count in New Mexico?
Yes. Documented out-of-state experience counts toward New Mexico's eligibility requirements.
Does it work the other way, from New Mexico to Oklahoma?
Not necessarily. Reciprocity is directed. Going from New Mexico to Oklahoma, the mechanism is not applicable.

Sources

  1. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
  2. Construction Industries Licensing Act, NMSA 1978 Chapter 60, Article 13 (RLD compilation as of July 1, 2021) · NMSA 1978 §§ 60-13-3, 60-13-14, 60-13-14.1, 60-13-23, 60-13-49 · New Mexico Regulation and Licensing Department · Statute · verified September 17, 2026
  3. 14.5.5 NMAC - Construction Industries General Provisions: Fees · 14.5.5.8 and 14.5.5.14 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
  4. 14.6.3 NMAC - Construction Industries Licensing: Contractor's License Requirements · 14.6.3.8 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
  5. 14.6.6 NMAC - Construction Industries Licensing: Classifications and Scopes of Work · 14.6.6.8 and 14.6.6.9 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
  6. NM CID - How to Obtain a Contractor License and Contractor License Application (updated October 2023) · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
  7. State of New Mexico Contractor (Qualifying Party) Examinations Candidate Information Bulletin (PSI) · PSI Services for the NM Construction Industries Division · Other · verified September 17, 2026
  8. New Mexico Contractor Licensing - Frequently Asked Questions (CID / PSI) · PSI Services for the New Mexico Construction Industries Division · Faq · verified September 17, 2026
  9. PSI General Building Work Experience Verification - New Mexico Contractor Licensing Service · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
  10. New Mexico Licensing Fees (CID contractor, qualifying party and journeyman fee schedule) · PSI Services for the New Mexico Construction Industries Division · Other · verified September 17, 2026
  11. NM CID Qualifying Party Certificate Application and Instructions (instructions updated May 2025, form updated August 2025) · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
  12. NM Regulation and Licensing Department - Apply for a Construction Industries License · New Mexico Regulation and Licensing Department, Construction Industries Division · Agency Page · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related