Oklahoma to North Dakota: general contractor license reciprocity
Oklahoma does not issue a statewide general contractor license, so there is nothing to transfer. Here is North Dakota's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Contractor license for every applicant, wherever they come from (all states)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
An unlimited or general contractor license from another state gives an applicant no advantage in North Dakota, and none is needed. Whatever the size of the project, North Dakota asks for a sworn application naming the class of license sought, a signed statement of the applicant's experience and qualifications, a certificate of liability insurance with the Secretary of State named as certificate holder, a Workforce Safety and Insurance certificate of payment or letter of good standing, and the class fee, which is $450 for class A with no limit on project value. Because there is no trade examination, no business and law examination, no experience threshold, no bond and no financial responsibility test, there is nothing for an out-of-state credential to be measured against or to replace. A contractor based in another state applies on the same terms as a resident and does not have to move here, but a nonresident appoints the registrar as their agent for service of process by signing the application unless they are already registered here as a foreign corporation, limited liability company or partnership with a registered agent on file. The Secretary of State publishes no reciprocity agreement and no endorsement route for the contractor license.
The class letters are a contract-value cap and not a skill grading, so they are chosen rather than earned: class A is unlimited, class B stops at $500,000, class C at $300,000 and class D at $100,000 for any single contract project, and a contractor may renew under a different class by paying that class's issue fee. On public work the class matters at the bid: a contract may not be awarded unless the contractor holds a license in the class the project's value falls within, the license must have been held at least ten days before the date set for receiving bids, and a copy of the license or current-year certificate goes in the bid bond envelope or the bid is returned unread. Bids to the Department of Transportation and the Public Service Commission, and federal-aid highway work, are outside that rule, and a public contract also needs a tax commissioner certificate showing no delinquent income, sales or use taxes. Two apparent routes are dead ends. The word reciprocal appears once in the contractor chapter, at NDCC 43-07-22, and it lets the labor commissioner make arrangements with another state about the North Dakota resident hiring preference on public construction contracts, not about licensure. And North Dakota does not accept the NASCLA Accredited Examination for Commercial General Building Contractors and is not among the participating agencies, which follows from there being no North Dakota contractor examination for it to replace.
At a glance
- Trade exam
- Waived
- Law / code exam
- Not required
- Out-of-state hours
- Do not count
What you must already have
- No examination, minimum experience, work history review, education, continuing education, financial statement or qualifying party is required, however large the project. The class letter caps the value of a single contract project and is chosen on the application; class A carries no limit at all.NDCC 43-07-04(1) sets out the complete application contents and NDCC 43-07-07(1) sets the class limits. The Secretary of State's contractor page prints the same list and adds no examination, bond, net worth figure or responsible managing individual. The old classes-of-licenses section, 43-07-05, was repealed in 2015.
- The applicant must be eighteen or older and must sign the application under oath, including a statement of their own experience and qualifications as a contractor and the class of license sought. North Dakota sets no threshold for that experience and does not check it against another state's license or classification.NDCC 43-07-04(1). Out-of-state experience is described in that statement like any other experience; the registrar may deny a license where an application contains false or misleading information, so it should be described accurately.
- You must have no disciplinary action or unresolved complaints on your record.NDCC 43-07-04.1, with the rehabilitation test in NDCC 12.1-33-02.1 and a right of appeal to district court. Discipline under NDCC 43-07-15 runs to a civil penalty of up to $1,000, restitution of up to $5,000 and suspension of up to sixty months, and any penalty or restitution must be paid before a license is renewed, reinstated or newly issued.
What you'll do to get licensed in North Dakota
- 1Application fee. Pay the application fee ($450). License fee for a class A license, which carries no limitation on the value of any single contract project. The other classes are cheaper because they are capped: class B $300 up to $500,000 per job, class C $225 up to $300,000 per job and class D $100 up to $100,000 per job. Renewal is $90 for class A and $60, $45 or $30 for classes B, C and D. A contractor may apply at renewal for a different class than the one previously held by paying the issue fee for the new class. A name change costs $10 and must be reported to the registrar within ten days..
- 2Insurance. Carry the required insurance. Certificate of liability insurance filed with the application, issued in the same name the contractor license is requested in and listing the North Dakota Secretary of State, 600 E Boulevard Ave, Dept 108, Bismarck, ND 58505, as the certificate holder. No minimum policy limit is set in the statute or published on the Secretary of State's page, so the state does not publish one; ask the Secretary of State on 701-328-2900 or 800-352-0867 what its reviewers accept, and expect owners, lenders and construction managers on commercial work to require far higher limits by contract. Coverage must be maintained and refiled at renewal; failing to maintain it puts the license out of good standing and leads to revocation if it is not cured within thirty days..
- 3Insurance. Carry the required insurance. Workforce Safety and Insurance coverage, evidenced by a statement from WSI that coverage satisfactory to WSI has been secured. A contractor with employees residing in North Dakota files a current WSI certificate of payment; a contractor with no North Dakota resident employees who does not meet the tests of significant contact files a WSI letter of good standing instead. At renewal the contractor certifies that all payroll taxes, including North Dakota income tax, WSI premiums and unemployment insurance premiums due at the time of renewal have been submitted..
- 4Business license. Obtain a business license. Business registration with the Secretary of State, completed before the license application because the name on the application must match the business registration. A corporation, limited liability company or other entity must register, an out-of-state company registers as a foreign corporation, LLC, LLP or limited partnership, and a sole proprietor or general partnership may need a trade name or fictitious partnership name registration. Letting any of those registrations lapse is a listed ground for the registrar to classify the contractor license as not in good standing, which requires the contractor to stop soliciting or entering new projects and leads to revocation if it is not cured within thirty days..
- 5Financial responsibility. Show financial responsibility (if applicable). North Dakota requires no financial statement, net worth figure, working capital figure or credit report for a contractor license at any class, including class A. The class letter is a cap on the value of a single contract project that the applicant selects and pays for, not a financial qualification the registrar assesses. Public owners may impose their own financial and prequalification conditions on top of the license: any administrative or governing body with power to enter public contracts may set reasonable additional requirements as a condition of awarding a public works contract..
- 6Background check. Complete a background check (if applicable). Not part of the standard filing. The registrar may require any other information needed to determine eligibility to act as a contractor, expressly including criminal history record information about the applicant or the officers, members or partners of a business applicant, held by the North Dakota Bureau of Criminal Investigation or a similar agency in another state, at the applicant's expense. Failing or refusing to authorize or pay for that information is a ground to refuse the license..
- 7Surety bond. Post a surety bond (if applicable). No surety bond is required for the contractor license itself; the bond section of the contractor statute was repealed in 1995. Bonding is still a fact of commercial life in North Dakota: a bid for a public contract project must enclose a copy of the license in the bid bond envelope, public owners may impose their own bonding conditions, and private owners and lenders commonly require performance and payment bonds by contract..
- 8Other. Ongoing obligations once licensed. The license number must be supplied to the permit-issuing official on every building permit application. A public contract with the state or any political subdivision additionally requires a certificate from the tax commissioner showing no delinquent income, sales or use taxes. The license runs to the end of the contractor year on March 1 and is renewed by filing a list of every project, contract or subcontract over $50,000 completed in North Dakota in the preceding calendar year, the nature of that work, a current liability insurance certificate and the payroll tax certification, with the renewal fee; that project list is forwarded to the state tax commissioner. Missing the March 1 deadline leaves the contractor unlicensed until they renew, which is possible until June 1 on payment of a $50 penalty plus the renewal fee, after which the license is expired..
Published fees on this path total $450, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · if applicable
How North Dakota licenses general contractors
North Dakota general contractor · “Contractor License, class A (no limit on project value) through class D”
Statewide license
Issued by North Dakota Secretary of State (Registrar of Contractors)
North Dakota has one contractor license for every kind of building work, issued by the Secretary of State as registrar of contractors, and it is the same license a homebuilder holds: the difference between a commercial general contractor and a residential builder here is the class letter they choose, not a different credential. A license is required of anyone whose job exceeds $4,000 in cost, value or price, including subcontractors, public contractors and nonresident contractors, and an unlicensed contractor cannot maintain a claim or lawsuit in a North Dakota court over the contracting business. The class letter caps the value of a single contract project: class A carries no limit, class B stops at $500,000, class C at $300,000 and class D at $100,000, so an unlimited or commercial builder applies for class A, and on a public contract the license must be in the class the project's value falls within and must have been held at least ten days before the bid date. There is no examination, no experience or work history review, no bond, no financial statement, no net worth or working capital test and no qualifying party or responsible managing individual: the license is issued to the individual or business that contracts, on proof of liability insurance and Workforce Safety and Insurance coverage. Electrical and plumbing work are licensed separately by the North Dakota State Electrical Board and the North Dakota State Plumbing Board, so any of that scope must be performed under the right board license.
Why Oklahoma has nothing to transfer
Oklahoma general contractor · “General or commercial building contractor license or registration (city-issued)”
Licensed by cities and counties
Issued by No state authority for building contractors; cities register general and commercial builders
Oklahoma has no statewide general, commercial or unlimited building contractor license, and the Construction Industries Board publishes that finding itself: "General Contractors are not currently required to have a state license in Oklahoma for general contracting", with the rider that trade licenses and registrations are still required for licensed trade work and that local jurisdictions should be contacted for local requirements. The CIB regulates plumbing, electrical, mechanical, roofing, building and construction inspectors, and home inspectors, and nothing else; the Oklahoma Uniform Building Code Commission adopts the statewide building codes that local departments enforce. The one statewide credential a general contractor may still need in its own right is the CIB roofing contractor registration, which reaches resident and non-resident contractors alike and carries a commercial endorsement with a PSI examination, a $230 initial fee and $1,000,000 of liability insurance for commercial roofing. Commercial building itself is a city matter and the requirements are administrative. Edmond states that "a general building contractor's license is required for permit submittal" and issues one on an email filing, Broken Arrow registers general contractors on a $50,000 liability certificate and a workers' compensation filing, and Tulsa registers contractor accounts by trade with an insurance undertaking. Oklahoma City is the notable gap: its only building category is Building Contractor (Residential Only), so a commercial builder there registers no general credential at all, and Norman licenses only trade, sign and structure moving contractors. None of these carries a trade or business-law exam, a bond, a qualifying party or a financial statement, and there is no NASCLA route because Oklahoma has no state board to accept one.
How local licensing works in Oklahoma
How local licensing works. No Oklahoma agency licenses general or commercial building contractors, so there is no state application to file, no state qualifying party and no state examination. The Construction Industries Board's own FAQ puts it plainly - "General Contractors are not currently required to have a state license in Oklahoma" - and directs contractors to check "the jurisdiction in which you are interested in performing construction related work", noting that other agencies such as the Corporation Commission, the Oklahoma Department of Labor and the Oklahoma Liquefied Petroleum Gas Board license other construction-related areas. Statewide commercial and residential building codes come from the Oklahoma Uniform Building Code Commission and are enforced locally.
Roofing, and only roofing, is a statewide registration. A commercial builder self-performing roofing needs a CIB roofing contractor registration plus a commercial endorsement. The registration is $75 initially and annually, needs at least $500,000 of general liability insurance naming the board as certificate holder, workers' compensation coverage or exemption, Secretary of State business-name registration, entity documents and an affidavit of lawful presence, and runs through a qualifying party who is an owner, officer, member or general partner actively engaged in the work. The commercial endorsement costs $230 initially and $100 to renew, requires a roofing registration in good standing first, raises the liability minimum to $1,000,000, and requires a PSI examination once the application is approved. Commercial roofers also complete four hours of approved continuing education every 36 months. Registration is non-transferable and applies to non-resident contractors as much as to Oklahoma firms.
Oklahoma City. There is no general or commercial building registration. The city's contractor registration categories are Boiler, Building Contractor (Residential Only), Electrical, Fence, House Moving, Insulation, Mechanical, Plumbing, Prequalified Contractor and Sidewalk Contractor (both through Public Works), and Sign. A commercial builder pulls permits without a city contractor credential, while the electrical, mechanical and plumbing scope goes to contractors registered on current CIB state licenses and boiler work to a contractor licensed by the Oklahoma Department of Labor. Prequalification through Public Works is a procurement matter for city contracts rather than a building credential. Development Services, 420 W. Main St., (405) 297-2525.
Tulsa. The Permit Center "registers the licenses of trade contractors" and issues trade permits; the city's guide to doing business states that "in Oklahoma there is no general license required to start or own a business or to operate as a general contractor" and that the state-licensed trades - electrical, fire, mechanical and plumbing - "must then register with the City of Tulsa." Registration is an account filing on the Account Information and Contractor Registration form, whose trade checkboxes include Building alongside the state-licensed trades, demolition, house moving, fire protection systems, and sidewalk, driveway and paving cut work; the last of those "requires an Annual Contractor's Contract with City of Tulsa." The state control number is requested only "if applicable", and the substantive undertaking is to carry general liability insurance naming the City of Tulsa as an additional insured with 30 days' written notice of cancellation. Stationary engineers are the one credential Tulsa tests itself, on a certificate of competency. Pre-development meetings cost $350 for the Infrastructure Development Process route and $350 for the Code Compliance route, each credited against later fees. Permit Center, 175 E. 2nd Street, 4th Floor, (918) 596-9456; fee ordinance Title 49.
Norman. Norman licenses trade contractors, sign contractors and structure movers and nothing else. A Trade Contractor license for electrical, mechanical or plumbing work requires a current active CIB state license, shown active on the CIB website, plus photo ID, renewed annually by 31 March. A Sign Contractor license requires a $2,000 surety bond or certificate of deposit on the city's bond form. A Structure Moving license requires casualty insurance of at least $100,000 and proof of unified carrier registration or an intrastate license. There is no general or commercial building contractor license, so a commercial builder works through the online permitting portal and the licensed trades. Development Services, (405) 366-5339.
Broken Arrow. The Community Permitting and Licensing Division issues residential and commercial building permits and registers contractors through the Citizen Self Service portal. The General Contractor Registration form requires only a current general liability insurance certificate with the business name and address, the City of Broken Arrow named as certificate holder and minimum $50,000 coverage; a current workers' compensation certificate or an Affidavit of Exemption from the Oklahoma Workers' Compensation Commission; the city named as certificate holder on every certificate; and a copy of the contractor's driver's license. No exam, bond, experience or state license is required, and no fee is printed on the form, so confirm the amount with the division. 220 S. First Street, 918-259-2400 ext. 2359.
Edmond. Building & Fire Code Services states that "a general building contractor's license is required for permit submittal" and opens a new one on an email giving the company name, mailing address, contact phone number and portal email. Residential building contractors hold a separate license and "must maintain current general liability and workman's compensation for permit submittal." Trade contractors "are required to hold active city and state licenses" and file their CIB license and driver's license; trade licenses expire 31 July, renew through the portal from July through August, and lapse on 1 September if unpaid. No exam, bond, experience requirement or fee is published for the general building license, so confirm what is payable before submitting. 22 E. Main Street, Edmond, (405) 359-4780, permits.edmondok.gov.
What does and does not travel. An out-of-state general contractor license, a NASCLA Accredited Examination and out-of-state project experience carry no weight anywhere in Oklahoma, because no Oklahoma authority tests or qualifies commercial builders and Oklahoma is not a NASCLA participating state. What does travel is the CIB credential set: the roofing contractor registration, which the Roofing Contractor Registration Act applies to non-resident contractors by name, and the plumbing, electrical and mechanical licenses that several of the cities above demand before they will register a trade contractor. Those routes, including the board's published arrangements with other states, belong on this site's plumbing, electrical and HVAC pages rather than here.
- Oklahoma City (Development Services - residential-only building registration; no general or commercial category)
- Tulsa (Development Services Permit Center - contractor account and trade registration)
- Norman (Development Services - trade, sign and structure moving licenses only)
- Broken Arrow (Community Permitting and Licensing - General Contractor Registration)
- Edmond (Building & Fire Code Services - general building contractor license)
Common questions
- Do I have to take the North Dakota general contractor exam if I'm licensed in Oklahoma?
- No. The trade exam is waived on this path.
- What does it cost to get a North Dakota general contractor license from Oklahoma?
- Published fees on this path total $450, not counting exam vendor fees or bonds.
- Do my Oklahoma work hours count in North Dakota?
- No. North Dakota does not credit out-of-state hours on this path.
- Does it work the other way, from North Dakota to Oklahoma?
- Not necessarily. Reciprocity is directed. Going from North Dakota to Oklahoma, the mechanism is not applicable.
Sources
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- North Dakota Century Code Chapter 43-07 - Contractors · NDCC 43-07-01, 43-07-02, 43-07-04, 43-07-04.1, 43-07-07, 43-07-08, 43-07-09, 43-07-10, 43-07-11, 43-07-12, 43-07-19, 43-07-22, 43-07-24 · North Dakota Legislative Branch · Statute · verified September 17, 2026
- North Dakota State Electrical Board - Home (license types and reciprocal license agreements) · North Dakota State Electrical Board · Agency Page · verified September 17, 2026
- North Dakota Secretary of State - Contractors (licensing, classes, fees and renewal) · NDCC ch. 43-07 · North Dakota Secretary of State · Agency Page · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.