LicensebyState

Oklahoma to South Carolina: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 7 sources

Oklahoma does not issue a statewide general contractor license, so there is nothing to transfer. Here is South Carolina's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Qualifying party certification by NASCLA examination or by South Carolina examination (states without a waiver agreement)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

South Carolina accepts the NASCLA Accredited Examination for Commercial General Building Contractors in place of its own building technical examination. The Board is a participating agency in the NASCLA program, its Technical Exam Waiver Agreements chart maps the NASCLA Commercial General Building Contractors exam to the South Carolina Unlimited Building classification, and it says it accepts all states administering that exam; the candidate has NASCLA send the transcript directly to the Board. NASCLA does not waive the South Carolina Business Management & Law for Commercial Contractors examination, which every qualifying party must pass. An applicant without the NASCLA credential sits the South Carolina Limited Building or Unlimited Building technical examination through PSI instead. On either route the qualifying party files Doc. 168 with at least two years of full-time work experience performed within the past five years in the classification applied for, primarily commercial, documented on the Work Experience Affidavit (Doc. 167); experience earned in other states counts. The business then files Doc. 165 with the $350 licensure fee, its Secretary of State verification and a financial statement or surety bond for the group limit it wants.

S.C. Code Section 40-11-290 also allows the Board to exempt the technical examination for an applicant who can verify passing an examination in another state that is essentially the same as South Carolina’s, even without a reciprocal agreement, but the Board publishes no separate procedure for that outside the Technical Exam Waiver Agreements list and the NASCLA route. The examination score needed is 70 percent, an individual may sit a given examination twice in a twelve-month period and once every six months after that, and a certification left inactive four or more years has to be re-examined. Successful completion of a PHCC Academy of North Carolina apprenticeship is listed on Doc. 168 as an alternative to the two-year work experience affidavit. The Board publishes no processing time and no PSI fee amounts; contact it at [email protected] or (803) 896-4686.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • You must have passed a licensing exam in Oklahoma that the destination considers comparable.The Board’s licensure page lists "NASCLA: Contact NASCLA to have your transcripts sent directly to the Board" as a method of qualifying by examination, its NASCLA program handout states that the Board "is a participating state agency in administering the National Commercial Building Contractor exam, and the NASCLA Accredited Trade Examination for Electrical Contractors through the testing provider, PSI Exams", and the Technical Exam Waiver Agreements chart maps the NASCLA Commercial General Building Contractors exam to the Unlimited Building classification while accepting all states that administer it. The NASCLA exam is an examination credential rather than a license or a state-to-state agreement, so any candidate may sit it in any participating jurisdiction. It does not waive the South Carolina Business Management & Law for Commercial Contractors examination, the work experience requirement, the licensure fee or the financial responsibility requirement.
  • At least two years of full-time work experience performed within the past five years in the license classification or subclassification applied for, primarily commercial. Experience earned in other states counts and is documented on the Work Experience Affidavit (Doc. 167) by former or current employers.S.C. Code Section 40-11-230(B)(2) states the requirement for designation as a primary qualifying party and allows the Board to accept other proof of employment experience. Doc. 168 also accepts a Certificate of Achievement from a PHCC Academy of North Carolina apprenticeship in Heating, Air Conditioning and Plumbing in place of the affidavit, which matters for mechanical rather than building classifications.
  • The primary qualifying party must serve in a management capacity for the licensee, be actively involved in its management, supervision and operations, and may not take other employment that conflicts with those duties (S.C. Code Section 40-11-230(B)(3)).

What you'll do to get licensed in South Carolina

  1. 1Trade exam. Pass the destination's trade exam (if applicable). South Carolina Limited Building or Unlimited Building technical examination through PSI, registered at https://test-takers.psiexams.com/sccon. It is required unless the qualifying party brings the NASCLA Accredited Examination for Commercial General Building Contractors or an accepted examination from a jurisdiction on the Technical Exam Waiver Agreements list. The limited building contractor examination or the unlimited general contractor examination qualifies a Group 1, 2 or 3 license and the unlimited examination is required for Groups 4 and 5; structures built under a limited building examination are restricted to three stories in height..
  2. 2Law / code exam. Pass a law, rules, or code exam. South Carolina Business Management & Law for Commercial Contractors examination, administered by PSI. Every individual must pass it before the Board will certify them as a qualifying party, no matter which route they use to satisfy the technical examination. Register at https://test-takers.psiexams.com/sccon. S.C. Code Section 40-11-230 requires a grade of 70 percent or better, and an individual may sit a given examination only twice in a twelve-month period and once every six months after that..
  3. 3Exam fee. Pay the exam fee. PSI examination fees are paid directly to PSI when the examination is scheduled. The Board does not publish the amounts; the current fees are in PSI’s South Carolina candidate information bulletin at https://test-takers.psiexams.com/sccon, or call PSI at (855) 746-8173..
  4. 4License fee. Pay the license or certificate fee ($350). Non-refundable $350 licensure fee, paid by check or money order to SCCLB with the General and Mechanical Contractor Application for Licensure (Doc. 165). No cash is accepted and a returned-check fee of up to $30 may be charged. General Contractor licenses expire on October 31 in even-numbered years..
  5. 5Financial responsibility. Show financial responsibility of at least $10,000. Financial statement for the entity that will hold the license, sized by the license group it wants, with a balance sheet dated no more than twelve months before the application. For General Contractors the groups are: Group 1, bids and jobs up to $100,000, working capital $10,000 or net worth $20,000; Group 2, up to $400,000, $40,000 or $60,000; Group 3, up to $1,000,000, $100,000 or $150,000; Group 4, up to $3,000,000, $175,000 or $250,000; Group 5, unlimited, $250,000 or $350,000. Only one of working capital or net worth has to be met. Groups 1 and 2 may file the owner-prepared statement with an affidavit of accuracy (Doc. 172); Groups 3 and 4 need a statement compiled by a licensed CPA in accordance with GAAP; Group 5 needs an audited balance sheet from a licensed CPA. The figure shown is the Group 1 working capital minimum (S.C. Code Section 40-11-260)..
  6. 6Surety bond. Post a surety bond ($20,000) (if applicable). Optional alternative to the financial statement under S.C. Code Section 40-11-262: a surety bond in the same amount as the net worth required for the license group, so $20,000 for Group 1, $60,000 for Group 2, $150,000 for Group 3, $250,000 for Group 4 and $350,000 for Group 5. The surety must be authorized to transact surety business in South Carolina, the bond is continuous, lists the State of South Carolina as obligee, and stays in force until the licensee files a financial statement meeting its group. The original must carry the surety’s signature, the principal’s signature, a visible surety company seal and the attached power of attorney; DocuSign is not accepted, and a bond payable to the Residential Builders Commission is not accepted by this Board. The figure shown is the Group 1 bond..
  7. 7Business license. Obtain a business license. The license is issued to the business, so the entity must be able to conduct business in South Carolina. Attach a Certificate of Existence (or Good Standing) from the SC Secretary of State if the company was incorporated in South Carolina, or a Certificate of Authority if it was incorporated in another state, together with the articles of incorporation or organization and documentation of each owner’s percentage. This is not required for a sole proprietorship..
  8. 8Other. Primary Qualifying Party / Qualifying Party Initial Application (Doc. 168) for each qualifying party who is not already certified or has been inactive more than four years, with a copy of a driver’s license, state-issued ID, passport or military ID, a copy of the Social Security card, a notarized Verification of Lawful Presence form, the PQP/QP Company Acknowledgement Affidavit (Doc. 190), examination score sheets, and official license verifications from every other state where you are or have been licensed..

Published fees on this path total $350, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam · if applicable
  • Law / code exam
  • Exam fee

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $20,000 · if applicable

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How South Carolina licenses general contractors

South Carolina general contractor · “General Contractor license, Building classification (Limited Building or Unlimited Building), Group 1-5

Statewide license

Verified September 17, 2026· 5 sources

Issued by South Carolina Contractor’s Licensing Board (SC LLR)

Commercial and unlimited building work in South Carolina runs through the Contractor’s Licensing Board, which licenses General Contractors for any general contracting where the total cost of construction is more than $10,000. The license belongs to the business, not to the person: an individual, corporation, LLC or partnership holds it and must designate a Primary Qualifying Party for each classification, an individual in a management role who personally passes the examinations, so an inbound contractor applies as or for the entity that will sign contracts and pull permits. The Building classification covers commercial, industrial, institutional, modular and all other building construction including residential structures, and carries the Wood Frame Structures, Nonstructural Renovation, Masonry, Pre-engineered Metal Buildings, Roofing, Structural Framing and Miscellaneous Metals subclassifications. Every license also carries a group limit driven by money rather than skill: Group 1 bids and jobs up to $100,000 through to Group 5 with no cap, each set by working capital, net worth or a surety bond. The qualifying party for a Group 1, 2 or 3 license passes either the limited building contractor examination or the unlimited general contractor examination, while Groups 4 and 5 require the unlimited examination, and structures built under a limited building examination are restricted to three stories.

Moving to South CarolinaLeaving South Carolina

Why Oklahoma has nothing to transfer

Oklahoma general contractor · “General or commercial building contractor license or registration (city-issued)

Licensed by cities and counties

Verified September 17, 2026· 14 sources

Issued by No state authority for building contractors; cities register general and commercial builders

Oklahoma has no statewide general, commercial or unlimited building contractor license, and the Construction Industries Board publishes that finding itself: "General Contractors are not currently required to have a state license in Oklahoma for general contracting", with the rider that trade licenses and registrations are still required for licensed trade work and that local jurisdictions should be contacted for local requirements. The CIB regulates plumbing, electrical, mechanical, roofing, building and construction inspectors, and home inspectors, and nothing else; the Oklahoma Uniform Building Code Commission adopts the statewide building codes that local departments enforce. The one statewide credential a general contractor may still need in its own right is the CIB roofing contractor registration, which reaches resident and non-resident contractors alike and carries a commercial endorsement with a PSI examination, a $230 initial fee and $1,000,000 of liability insurance for commercial roofing. Commercial building itself is a city matter and the requirements are administrative. Edmond states that "a general building contractor's license is required for permit submittal" and issues one on an email filing, Broken Arrow registers general contractors on a $50,000 liability certificate and a workers' compensation filing, and Tulsa registers contractor accounts by trade with an insurance undertaking. Oklahoma City is the notable gap: its only building category is Building Contractor (Residential Only), so a commercial builder there registers no general credential at all, and Norman licenses only trade, sign and structure moving contractors. None of these carries a trade or business-law exam, a bond, a qualifying party or a financial statement, and there is no NASCLA route because Oklahoma has no state board to accept one.

How local licensing works in Oklahoma

How local licensing works. No Oklahoma agency licenses general or commercial building contractors, so there is no state application to file, no state qualifying party and no state examination. The Construction Industries Board's own FAQ puts it plainly - "General Contractors are not currently required to have a state license in Oklahoma" - and directs contractors to check "the jurisdiction in which you are interested in performing construction related work", noting that other agencies such as the Corporation Commission, the Oklahoma Department of Labor and the Oklahoma Liquefied Petroleum Gas Board license other construction-related areas. Statewide commercial and residential building codes come from the Oklahoma Uniform Building Code Commission and are enforced locally.

Roofing, and only roofing, is a statewide registration. A commercial builder self-performing roofing needs a CIB roofing contractor registration plus a commercial endorsement. The registration is $75 initially and annually, needs at least $500,000 of general liability insurance naming the board as certificate holder, workers' compensation coverage or exemption, Secretary of State business-name registration, entity documents and an affidavit of lawful presence, and runs through a qualifying party who is an owner, officer, member or general partner actively engaged in the work. The commercial endorsement costs $230 initially and $100 to renew, requires a roofing registration in good standing first, raises the liability minimum to $1,000,000, and requires a PSI examination once the application is approved. Commercial roofers also complete four hours of approved continuing education every 36 months. Registration is non-transferable and applies to non-resident contractors as much as to Oklahoma firms.

Oklahoma City. There is no general or commercial building registration. The city's contractor registration categories are Boiler, Building Contractor (Residential Only), Electrical, Fence, House Moving, Insulation, Mechanical, Plumbing, Prequalified Contractor and Sidewalk Contractor (both through Public Works), and Sign. A commercial builder pulls permits without a city contractor credential, while the electrical, mechanical and plumbing scope goes to contractors registered on current CIB state licenses and boiler work to a contractor licensed by the Oklahoma Department of Labor. Prequalification through Public Works is a procurement matter for city contracts rather than a building credential. Development Services, 420 W. Main St., (405) 297-2525.

Tulsa. The Permit Center "registers the licenses of trade contractors" and issues trade permits; the city's guide to doing business states that "in Oklahoma there is no general license required to start or own a business or to operate as a general contractor" and that the state-licensed trades - electrical, fire, mechanical and plumbing - "must then register with the City of Tulsa." Registration is an account filing on the Account Information and Contractor Registration form, whose trade checkboxes include Building alongside the state-licensed trades, demolition, house moving, fire protection systems, and sidewalk, driveway and paving cut work; the last of those "requires an Annual Contractor's Contract with City of Tulsa." The state control number is requested only "if applicable", and the substantive undertaking is to carry general liability insurance naming the City of Tulsa as an additional insured with 30 days' written notice of cancellation. Stationary engineers are the one credential Tulsa tests itself, on a certificate of competency. Pre-development meetings cost $350 for the Infrastructure Development Process route and $350 for the Code Compliance route, each credited against later fees. Permit Center, 175 E. 2nd Street, 4th Floor, (918) 596-9456; fee ordinance Title 49.

Norman. Norman licenses trade contractors, sign contractors and structure movers and nothing else. A Trade Contractor license for electrical, mechanical or plumbing work requires a current active CIB state license, shown active on the CIB website, plus photo ID, renewed annually by 31 March. A Sign Contractor license requires a $2,000 surety bond or certificate of deposit on the city's bond form. A Structure Moving license requires casualty insurance of at least $100,000 and proof of unified carrier registration or an intrastate license. There is no general or commercial building contractor license, so a commercial builder works through the online permitting portal and the licensed trades. Development Services, (405) 366-5339.

Broken Arrow. The Community Permitting and Licensing Division issues residential and commercial building permits and registers contractors through the Citizen Self Service portal. The General Contractor Registration form requires only a current general liability insurance certificate with the business name and address, the City of Broken Arrow named as certificate holder and minimum $50,000 coverage; a current workers' compensation certificate or an Affidavit of Exemption from the Oklahoma Workers' Compensation Commission; the city named as certificate holder on every certificate; and a copy of the contractor's driver's license. No exam, bond, experience or state license is required, and no fee is printed on the form, so confirm the amount with the division. 220 S. First Street, 918-259-2400 ext. 2359.

Edmond. Building & Fire Code Services states that "a general building contractor's license is required for permit submittal" and opens a new one on an email giving the company name, mailing address, contact phone number and portal email. Residential building contractors hold a separate license and "must maintain current general liability and workman's compensation for permit submittal." Trade contractors "are required to hold active city and state licenses" and file their CIB license and driver's license; trade licenses expire 31 July, renew through the portal from July through August, and lapse on 1 September if unpaid. No exam, bond, experience requirement or fee is published for the general building license, so confirm what is payable before submitting. 22 E. Main Street, Edmond, (405) 359-4780, permits.edmondok.gov.

What does and does not travel. An out-of-state general contractor license, a NASCLA Accredited Examination and out-of-state project experience carry no weight anywhere in Oklahoma, because no Oklahoma authority tests or qualifies commercial builders and Oklahoma is not a NASCLA participating state. What does travel is the CIB credential set: the roofing contractor registration, which the Roofing Contractor Registration Act applies to non-resident contractors by name, and the plumbing, electrical and mechanical licenses that several of the cities above demand before they will register a trade contractor. Those routes, including the board's published arrangements with other states, belong on this site's plumbing, electrical and HVAC pages rather than here.

Moving to OklahomaLeaving Oklahoma

Common questions

Do I have to take the South Carolina general contractor exam if I'm licensed in Oklahoma?
The trade exam is waived, but South Carolina requires a law or code exam.
What does it cost to get a South Carolina general contractor license from Oklahoma?
Published fees on this path total $350, not counting exam vendor fees or bonds.
Do my Oklahoma work hours count in South Carolina?
Yes. Documented out-of-state experience counts toward South Carolina's eligibility requirements.
Does it work the other way, from South Carolina to Oklahoma?
Not necessarily. Reciprocity is directed. Going from South Carolina to Oklahoma, the mechanism is not applicable.

Sources

  1. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
  2. S.C. Code of Laws Title 40, Chapter 11 - Contractors · S.C. Code Ann. Sections 40-11-30, 40-11-230, 40-11-260, 40-11-262, 40-11-290, 40-11-410 · South Carolina Legislature · Statute · verified September 17, 2026
  3. General and Mechanical Contractor Application for Licensure and Instructions (Doc. 165, 12/22/2025 v2.2) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Form · verified September 17, 2026
  4. General and Mechanical Contractors - Primary Qualifying Party (PQP) and Qualifying Party (QP) Initial Application (Doc. 168, 12/19/2025 v2.1) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Form · verified September 17, 2026
  5. SC Contractor’s Licensing Board - Licensure with the Board (application, qualifying parties, exams, group limits, financial statements, bonds) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agency Page · verified September 17, 2026
  6. SC Contractor’s Licensing Board - NASCLA Accredited Examination Program (board handout) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agency Page · verified September 17, 2026
  7. SC Contractor’s Licensing Board - Technical Exam Waiver Agreements (as of May 2026, Revised 5/2026) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agreement Document · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related