Pennsylvania to Arizona: general contractor license reciprocity
Pennsylvania does not issue a statewide general contractor license, so there is nothing to transfer. Here is Arizona's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
NASCLA exam or out-of-state waiver of the trade examination (every origin state)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Arizona has no reciprocity agreement with any state, so every inbound applicant follows the same route and no origin state is treated better than another. The Registrar's own words are: "Arizona does not have direct reciprocity with any state; however, the Registrar does offer out of state applicants the opportunity to request a waiver of the required trade exam and experience, if the qualifying party has held a comparable license in another state within the past 5 years of the application date and the license was obtained by a trade examination." There are two ways past the Arizona trade exam at this level. The first is the NASCLA Accredited Examination for Commercial General Building Contractors, which the Registrar accepts in place of its own trade exam for the B-1, B-2, KB-1 and KB-2 classifications; you may sit it in any participating jurisdiction and buy a transcript from NASCLA so the Registrar can see the result. The second is the out-of-state waiver on Form RC-L-200G: you fill in your side, send it to the agency that issued your license so it can verify your license history, exams and years of experience and stamp it with a state seal, then enclose the returned form with your Arizona application in place of a trade exam result. That waiver is discretionary and is not pre-approved. The Arizona Statutes and Rules Exam is never waived on either route for an out-of-state applicant. Four years of trade experience, a license bond, background checks for every person named on the application, entity registration and the fees all still apply.
The rule behind the waiver is A.A.C. R4-9-106(E)(1): the Registrar "may waive the trade examination requirement if records reflect that the qualifying party is currently or has previously been a qualifying party for a licensee in the other state in the same classification, or in a comparable classification, within the preceding five years." Because it is written as "may waive", it is a case-by-case decision rather than an entitlement, and comparability of your out-of-state classification to the Arizona B-1 or B-2 classification is the Registrar's call. Form RC-L-200G also cites A.R.S. 32-1122(A)(4), A.R.S. 32-1122(E)(1) and A.R.S. 32-4302 and says a qualifying applicant may see "the waiver of the examination requirements, experience requirements, or both." A.R.S. 32-4302 is Arizona's universal licensing recognition statute: it requires a Title 32 license to be issued to a person who establishes residence in Arizona and who has held a good-standing license in another state at the same practice level for at least a year, obtained by examination where the other state required one, with no discipline or pending investigation; subsection (C) preserves the state-laws exam, so the Arizona Statutes and Rules Exam still applies. The Registrar's Service Members and Veterans page publishes the no-examination version of that statute for the spouse of an active-duty member accompanying the member to an Arizona duty station. One origin state is named in the Registrar's out-of-state paperwork, and it is a scope question rather than an advantage: Form RC-L-200G tells California applicants that "Arizona's Engineering classifications may differ in scope from California's" and asks anyone applying for the Arizona A General Engineering license to email a scope letter to [email protected] describing the work they will perform in Arizona before submitting the application. That instruction concerns the A engineering classification rather than the B-1 or B-2 building classifications, and it waives nothing. Separately, A.A.C. R4-9-106(F) lets the Registrar waive the experience requirement in whole or in part on the strength of an appropriate trade examination passed within the past two years or a valid nationally recognized certification. The Registrar publishes no processing time for application review or approval; ask at [email protected], 602-542-1525 or 877-692-9762.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must have passed a licensing exam in Pennsylvania that the destination considers comparable.The Registrar's licensing-fees page names "KB-1/B-1 Commercial or Dual Building Contractor and KB-2/B-2 Small commercial or Dual Residential and Small Commercial", and its License Classification Requirements page adds that "A Qualifying Party who has already taken the NASCLA exams for the B1, B2, CR-11 and C and R 11 Electrical may submit those scores with their applications", so an existing NASCLA pass travels with you. The NASCLA exam is an exam credential rather than a license or an agreement between states: anyone may sit it in any participating jurisdiction, and holding a license in a NASCLA state is not itself an Arizona advantage. It waives nothing else, including the Arizona Statutes and Rules Exam, the four years of experience, the bond, the background checks or any fee. You must buy a transcript from NASCLA so the Registrar can view your result.
- Alternatively: you are currently, or have been within the preceding five years, the qualifying party for a licensed contractor in another state in the same classification or in a classification the Registrar finds comparable to the Arizona B-1 or B-2 classification.A.A.C. R4-9-106(E)(1)(b). The Registrar's applying page states the same test as having "held a comparable license in another state within the past 5 years of the application date". Comparability is decided by the Registrar; there is no published list of equivalent out-of-state classifications and no pre-approval, so the decision is made when the completed application is reviewed. The verification is done by the issuing agency on Form RC-L-200G, which asks it for your current license status, the date you were first named on the license, the number of years of experience it can verify, the exams you took and the name and date of the passing exam, under the agency's state seal.
- Your Pennsylvania license must have been obtained by examination, not by reciprocity or grandfathering.
- Four years of practical or management trade experience in commercial building construction, at least two of them within the last ten years. Accredited college, university or manufacturer training may substitute for up to two of the four years. Experience earned in other states counts.A.R.S. 32-1122(E)(1) and the Registrar's License Classification Requirements, which set four years for the B-1, B-2, KB-1 and KB-2 classifications and state that the years "must be hands-on and/or managerial experience". A.A.C. R4-9-119 requires the Registrar to accept military service or training, diplomas or transcripts from accredited training programs, and completion certificates from an apprenticeship approved by the US Department of Labor or a state apprenticeship agency, and to accept experience regardless of whether you were licensed or working for a licensed entity at the time. The Registrar may also reduce the four-year requirement where custom and usage in the craft shows it to be excessive, and under A.A.C. R4-9-106(F) may waive experience in whole or in part on the strength of a trade exam passed within the past two years or a valid nationally recognized certification. Form RC-L-200G can waive the experience requirement as well as the exam when the out-of-state agency verifies your years.
- You must have no disciplinary action or unresolved complaints on your record.A.R.S. 32-1122(C) and (D). The Registrar may find the circumstances behind a denial, refusal or revocation excusable if your actions did not result in an unremedied hardship, danger or loss to the public. Prior-license, felony and unlicensed-activity disclosure forms go in with the application where they apply.
What you'll do to get licensed in Arizona
- 1Law / code exam. Pass a law, rules, or code exam. Arizona Statutes and Rules Training Course and Exam (SRE), a computer-based open-book course and exam offered only online through Gmetrix. It covers the building, safety, health and lien laws of the state, the administrative principles of the contracting business and the Registrar's rules, and a grade of at least 70 percent is required. It cannot be waived unless the qualifying party has been the qualifying party on an Arizona contractor's license within the past five years, so an out-of-state applicant always takes it, whether or not the trade exam is waived..
- 2Exam fee. Pay the exam fee ($61). Examination fee for the online Arizona Statutes and Rules Training Course and Exam, paid directly to Gmetrix..
- 3Trade exam. Pass the destination's trade exam (if applicable). Trade exam for the commercial and dual general building classifications. You may satisfy it in one of three ways: pass the NASCLA Accredited Examination for Commercial General Building Contractors, pass the AZ ROC general commercial exam through PSI Services, or obtain an out-of-state waiver on Form RC-L-200G. A passing grade of at least 70 percent is required and an Arizona exam must have been taken not more than two years before you apply. The Registrar has combined the B-1, B-2, KB-1 and KB-2 exams into a single exam, so one sitting covers whichever of those four classifications you apply for. After a failure you wait 30 days to retake, and 90 days after a third or later failure..
- 4Exam fee. Pay the exam fee ($66) (if applicable). Examination fee for the AZ ROC trade-specific exam, taken either online or at a testing center, paid directly to PSI. Payable only if you sit the Arizona trade exam rather than using the NASCLA exam or obtaining a waiver..
- 5Exam fee. Pay the exam fee ($106) (if applicable). Examination fee for the NASCLA Commercial General Building exam, paid to PSI Exams Online, if you take the NASCLA route instead of the AZ ROC trade exam. A separate NASCLA transcript purchase is also payable directly to NASCLA online and is required before the Registrar can view your result; the Registrar's applying page and its licensing-fees page give different amounts for that second charge, so confirm the current figure with NASCLA or ask the Registrar at [email protected] before you pay..
- 6Application fee. Pay the application fee ($200). Application fee for a General Commercial classification (A, B-1, B-2) or a General Dual classification (KA, KB-1, KB-2). The Registrar waives the initial application fee for a first-time sole proprietor applicant who is the spouse of an active-duty service member, or a veteran discharged not more than two years before the application date; residential and dual applicants still pay the Residential Recovery Fund assessment..
- 7License fee. Pay the license or certificate fee ($580). License fee for a General Commercial classification, making $780 in total with the application fee; there is no recovery fund assessment on a commercial-only license. A General Dual license (KA, KB-1, KB-2) costs $480 in license fee plus a $370 Residential Recovery Fund assessment, or $1,050 in total, because it carries residential scope. Renewal is $580 for General Commercial and $480 plus a $270 recovery fund assessment, or $750, for General Dual..
- 8Surety bond. Post a surety bond ($5,000). Contractor's license bond on the Registrar's bond form, sized by classification and by the gross volume of work you expect to do in Arizona. For Class A and B general commercial building contractors the bands are $5,000 for $150,000 or less, $15,000 for more than $150,000 up to $500,000, $25,000 for more than $500,000 up to one million, $50,000 for more than one million up to five million, $75,000 for more than five million up to ten million, and $100,000 over ten million. A dual license such as KB-1 or KB-2 combines the commercial amount with the residential amount ($9,000 under $750,000 of residential volume, $15,000 at or above it) and the penal sum must be split on the bond between the two figures. A surety bond, cash, or a certificate of deposit from a bank operating in Arizona is accepted. The effective date cannot be in the future and must be within six months of submission, and the bond company's seal and a notarized attorney-in-fact signature are required..
- 9Other. Residential Recovery Fund assessment. It is not charged on a commercial-only B-1 or B-2 license, but every applicant for a dual classification such as KB-1 or KB-2 pays it, even if a license fee waiver is approved. The alternative to the assessment is posting a surety or cash bond of $200,000 to the license. ($370) (if applicable).
- 10Insurance. Carry the required insurance. Attestation that you have complied with the statutes and rules governing workers' compensation insurance. If the business is required to carry workers' compensation under Arizona law, the attestation must give the policy number or be accompanied by proof of self-insurance..
- 11Background check. Complete a background check. A background check for every person named on the license application, obtained through the Registrar's background check vendor. A completed check expires 90 days from its completion date. Anyone who has had an international address must submit an international and domestic check and list every foreign and domestic address where they have lived..
- 12Business license. Obtain a business license. Entity registration. A limited liability company or corporation must be registered with the Arizona Corporation Commission and in good standing with it before the license application is submitted, and must stay in good standing to renew. A partnership registers with the Arizona Secretary of State. A sole proprietorship needs no entity filing. You may only contract and advertise under the entity name the Registrar has licensed, so any trade name you want to use must be entered on the application as a DBA; filing the trade name with the Secretary of State is recommended but not required..
- 13Other. A legible copy of a government-issued photo identification, such as a valid driver's license or passport, for every individual named in the Persons section of the license application. Applications are filed through the ROC Online Customer Portal, or mailed to Registrar of Contractors, P.O. Box 6748, Phoenix, AZ 85005-6748, or delivered to 1700 W. Washington Street, Suite 105, Phoenix, AZ 85007-2812..
Published fees on this path total $841, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Exam fee · $61
- Trade exam · if applicable
- Exam fee · $66 · if applicable
- Exam fee · $106 · if applicable
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $5,000
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Arizona licenses general contractors
Arizona general contractor · “B-1 General Commercial Contractor; B-2 General Small Commercial; KB-1 or KB-2 dual”
Statewide license
Issued by Arizona Registrar of Contractors (AZ ROC)
Arizona's unlimited general building license is the B-1 General Commercial Contractor classification, issued statewide by the Registrar of Contractors (AZ ROC). It allows the licensee to construct, alter and repair any structure built for the support, shelter and enclosure of persons, animals or movable property, including the management and direct or indirect supervision of the work; electrical, plumbing, air conditioning, boiler, swimming pool, spa and water well work must be subcontracted to an appropriately licensed contractor. B-2 General Small Commercial Contractor is the same commercial scope capped at projects of $2,000,000 or less including labor and materials. Neither commercial classification covers residential work: the Registrar separates its markets by prefix, with B-1 and B-2 commercial general building, plain B residential general building, C- and R- commercial and residential specialty trades, CR- specialty dual, and K codes general dual. To hold both sides on one license you take a dual classification: KB-1 Dual Building Contractor covers the B-1 and B scopes together, and KB-2 Dual Residential and Small Commercial covers the B-2 and B scopes together. The license is held by a business, not by a person: it may be issued to a sole proprietorship, partnership, limited liability company or corporation, and the Registrar states that "the license belongs to the business and not to the qualifying party." The reader of this page is the qualifying party, the regularly employed person who supplies the four years of experience and passes the exams on the business's behalf.
Why Pennsylvania has nothing to transfer
Pennsylvania general contractor · “General Contractor License / Contractor License (city-issued)”
Licensed by cities and counties
Issued by No state contractor authority; city building and licensing departments
Pennsylvania issues no general, commercial or building contractor license, and the Department of Labor and Industry says so on its own contractor licensing page: "The Commonwealth of Pennsylvania currently has no licensure or certification requirements for most construction contractors (or their employees)." The statewide registration that does exist, the Home Improvement Contractor registration with the Office of Attorney General, is no help on commercial work, because the Home Improvement Consumer Protection Act reaches only private residences of one or two units and expressly excludes the construction of a new home, services for commercial or business use performed away from a private residence, and the conversion of commercial buildings to residential use. What Pennsylvania licenses at state level is a short list of specific activities: crane operators through the State Board of Crane Operators, asbestos and lead removal through Labor and Industry, and manufactured housing installers through the Manufactured Housing Improvement Act. Commercial building is controlled by the city instead. Philadelphia requires a Contractor License of any business doing construction, demolition or repair that does not need a specialized trade license, Pittsburgh requires a General Contractor License for all work under a Commercial Building Development Application, and Scranton requires a General Contractor License for multi-family residential of three or more units, commercial, demolition and industrial work. Because there is no state contractor examination, there is nothing for the NASCLA Accredited Examination to stand in place of: no Pennsylvania authority publishes acceptance of it, and none of the three city programs mentions it. There is likewise no reciprocity anywhere in Pennsylvania at this level, so a commercial contractor moving here applies city by city and carries the insurance each city demands.
How local licensing works in Pennsylvania
How it works in Pennsylvania. No state board licenses, examines or qualifies building contractors, so there is no qualifying party, no state trade or business-law exam, no state bond, no financial-responsibility test and no state credential for another state's license to convert into. Cities that license do it under their own ordinances through a licenses and inspections department, and their credentials are valid only inside their own boundaries. Two of the three largest programs test nothing at all: they turn on insurance, tax compliance, identification and, in one case, a federal lead-safety certification. Only Scranton asks for a passing score, and even that has an experience-and-references alternative.
Philadelphia. A Contractor License from the Department of Licenses and Inspections "is required for any business doing work that: Involves construction, demolition, or repair [and] Does not require a specialized company license." Complete demolition, electrical, fire suppression and plumbing each need their own specialized license instead. The company must hold a Business Income and Receipts Tax ID and a Commercial Activity License, be current on all City taxes, and file a Certificate of Insurance showing general liability of $500,000 per occurrence, automobile liability of $300,000 and workers' compensation of $100,000 per accident, $100,000 per employee and a $500,000 policy limit. The one competency element is safety training: "You must identify the supervisors responsible for construction projects. A supervisor can only be employed by one company. They must also show proof of completion of an approved OSHA 30 safety training course taken within five years of application date." The license fee is $126 and the renewal fee is $126, with a non-refundable $20 application fee applied to the license fee and the balance due on approval; renewing more than 60 days late costs 1.5% of the license fee for every month since expiry. Renewal keeps the same conditions, except that a supervisor whose OSHA 30 certificate L&I has already accepted may take 30 hours of construction or demolition safety continuing education instead of retaking the course. Apply through eCLIPSE or at the Permit and License Center, 1401 John F. Kennedy Blvd.; applications are reviewed within five business days. The governing ordinance is Philadelphia Code Title 9-1004.
Pittsburgh. The Department of Permits, Licenses and Inspections issues just two contractor licenses, General Contractor and Sign Contractor, and they do not overlap. A General Contractor License is required for all work performed under a Commercial Building Development Application, for new one- or two-family dwellings, for renovations and additions to rental or investment residential properties, and for commercial and residential demolition permits. Bring a valid photo ID, a general liability certificate of at least $1,000,000 each occurrence and $2,000,000 general aggregate, a workers' compensation certificate, a Tax Compliance Letter from the City's Department of Finance, and an EPA Renovation, Repair and Painting certification in lead-safe construction practices, which lasts five years. The 2026 fee schedule prices the General Contractor license at $90.00 for the initial application and $90.00 for each annual renewal, with a $50.00 late fee. Licenses expire 365 days from the date of issuance, with a 60-day grace period and late fees from day 31, after which the license lapses and you start again. Applications are handled entirely through OneStopPGH; PLI is at 412 Boulevard of the Allies, 412-255-2175.
Scranton. Code Enforcement requires a General Contractor License for "any other work done on a multi-family residential (3+ units), commercial, demolition, industrial, et. al." The license is issued to a named individual rather than a company, runs the calendar year, and takes two possible routes. Option A is the minimum paperwork plus "Exam Results demonstrating a passing score on a UCC exam or ICC exam in the relevant subject" - for a builder, the ICC General Construction Contractor category - and costs $225.00. Option B replaces the exam with four years of practical experience documented by W-2s or 1099s (or two years plus four years of relevant post-secondary education, counting each year of education as half a year of experience) and three reference letters: one from a contractor who employed the applicant, one from an ICC- or UCC-certified inspector who has inspected the applicant's work, and one from a licensed design professional. Option B costs $250.00. Renewal is $175.00 with a $50.00 late fee, due before your first permit of the calendar year or by March 31, whichever comes first. Everyone files identification, an indemnification statement, a disclosure statement covering litigation and any license revocation or suspension "by the City or any other jurisdiction," general liability, property damage and public liability insurance of $500,000 per person and $1,000,000 per occurrence, workers' compensation or an affidavit of no employees, an unsworn affidavit under 18 Pa.C.S. § 4904, and a Single Tax Office registration number. Scranton enforces the 2018 ICC series.
Allegheny County. The county licenses no contractors. Its permits and licenses are road and bridge, dog, food facility, lead and asbestos abatement, marriage, passports, plumbing, swimming pool and facility rentals, so outside Pittsburgh city limits a commercial contractor deals with the municipality's own code office.
Everywhere else. Most Pennsylvania municipalities enforce the Uniform Construction Code through permits, plan review and third-party inspection agencies without licensing contractors at all, and the Act allows them to charge a reasonable fee for that. Check each municipality's code office before bidding.
Arriving from another state. Nothing transfers. There is no state application to file, no endorsement or reciprocity route to ask about, and no Pennsylvania authority that accepts the NASCLA Accredited Examination or any other out-of-state contractor examination in place of a requirement, because the Commonwealth sets no examination requirement at all. The practical work is registering the business in Pennsylvania, buying the liability and workers' compensation cover each city specifies, getting the supervisor's OSHA 30 card for Philadelphia and the EPA lead-safe certification for Pittsburgh, and applying separately in every city where you will pull permits. If you also do home improvement work on one- and two-unit homes, register with the Office of Attorney General as well; that requirement is described at the residential level.
Common questions
- Do I have to take the Arizona general contractor exam if I'm licensed in Pennsylvania?
- The trade exam is waived, but Arizona requires a law or code exam.
- What does it cost to get a Arizona general contractor license from Pennsylvania?
- Published fees on this path total $841, not counting exam vendor fees or bonds.
- Do my Pennsylvania work hours count in Arizona?
- Yes. Documented out-of-state experience counts toward Arizona's eligibility requirements.
- Does it work the other way, from Arizona to Pennsylvania?
- Not necessarily. Reciprocity is directed. Going from Arizona to Pennsylvania, the mechanism is not applicable.
Sources
- Arizona Administrative Code Title 4, Chapter 9 - Registrar of Contractors (R4-9-106 Examinations; R4-9-119 Minimum Trade Experience) · A.A.C. R4-9-106(C)-(F); R4-9-119 · Arizona Secretary of State · Admin Rule · verified September 17, 2026
- A.R.S. 32-1122 - Qualifications for license (qualifying party experience, examination, bond, workers' compensation attestation) · A.R.S. 32-1122(B)-(F) · Arizona State Legislature · Statute · verified September 17, 2026
- A.R.S. 32-4302 - Out-of-state applicants; residents; military spouses; licensure; certification; exceptions; notice · A.R.S. 32-4302(A)-(C), (G) · Arizona State Legislature · Statute · verified September 17, 2026
- Arizona Registrar of Contractors - Applying for a License (qualifying party, examinations, NASCLA, out-of-state applicants, trade-exam waiver) · A.A.C. R4-9-106(E); A.R.S. 32-1122(E) · Arizona Registrar of Contractors · Agency Page · verified September 17, 2026
- Arizona Registrar of Contractors - Bond Information (license bond amounts by classification and contemplated gross volume) · Arizona Registrar of Contractors · Agency Page · verified September 17, 2026
- Arizona Registrar of Contractors - Instructions for License Bonds and bond schedules (Form RC-L-220/I, Rev. 02/23) · Arizona Registrar of Contractors · Form · verified September 17, 2026
- Arizona Registrar of Contractors - Applying for a License checklist (LLC or corporation applicants) · Arizona Registrar of Contractors · Form · verified September 17, 2026
- Arizona Registrar of Contractors - License Classification Requirements (note on submitting prior NASCLA scores) · Arizona Registrar of Contractors · Agency Page · verified September 17, 2026
- Arizona Registrar of Contractors - License Classification Requirements (minimum years of experience and exams by classification) · A.R.S. 32-1122(E) · Arizona Registrar of Contractors · Form · verified September 17, 2026
- Arizona Registrar of Contractors - License Classifications (B, B-1, B-2, B-3, KB-1, KB-2 general building scopes) · Arizona Registrar of Contractors · Agency Page · verified September 17, 2026
- Arizona Registrar of Contractors - License and Renewal Fees (general commercial, general residential and general dual) · A.R.S. 32-1152 · Arizona Registrar of Contractors · Agency Page · verified September 17, 2026
- Arizona Registrar of Contractors - Service Members and Veterans (licensure without examination, fee waiver, military experience) · A.R.S. 32-4301, 32-4302, 32-4303; A.A.C. R4-9-119 · Arizona Registrar of Contractors · Agency Page · verified September 17, 2026
- Arizona Registrar of Contractors - Out-of-State Waiver Request Form (Form RC-L-200G, Rev. 02/23) · A.R.S. 32-1122(A)(4), 32-1122(E)(1), 32-4302; A.A.C. R4-9-106, R4-9-119 · Arizona Registrar of Contractors · Form · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.