Pennsylvania to California: general contractor license reciprocity
Pennsylvania does not issue a statewide general contractor license, so there is nothing to transfer. Here is California's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
NASCLA Commercial General Builders examination waiver, accepted from any state for the General Building classification
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
CSLB waives the General Building trade examination for a contractor who has passed the NASCLA Accredited Examination for Commercial General Building Contractors, whatever state they are licensed in. CSLB limits this route to its General Building classification and also requires that you have held a general building contractor license, or a similar title, in good standing for the previous five years. You file the Application for Original Contractor's License with the $450 processing fee, enclose a signed and dated statement asking for the NASCLA Commercial General Builders examination waiver, have your current licensing agency complete CSLB's License Verification Request and return it to you sealed, and use your NASCLA account to ask that your examination results be shared with California. The Law and Business examination is never waived, and the four years of experience, the Certification of Work Experience, fingerprinting, the $25,000 contractor bond, workers' compensation or an exemption and all fees apply in full. An applicant who does not hold the NASCLA credential and is not covered by one of the five named-state agreements sits both examinations through PSI, but documented out-of-state work still counts toward the experience requirement.
The NASCLA examination is an examination credential, not a license and not an agreement between two states: anyone may sit it in any participating jurisdiction, which is why it is published here rather than as a state-by-state rule. CSLB's Reciprocity Requirements page states the acceptance in its own words, so it does not rest on NASCLA's list alone. CSLB names no other national examination and sets no net worth, working capital or financial statement requirement: the financial solvency section of the Contractors State License Law, Business and Professions Code section 7067.5, was repealed effective January 1, 2016 and the $25,000 contractor bond stands in its place. CSLB publishes no end-to-end processing time, only the date each unit is currently working on, updated weekly on its Processing Times page. Licensing Information Center: (800) 321-CSLB (2752).
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must have passed a licensing exam in Pennsylvania that the destination considers comparable.CSLB's Reciprocity Requirements page sets out this route under the heading "Contractors, Regardless of State, Who Have Passed the NASCLA Commercial General Builders Examination" and limits it to applicants applying for the CSLB General Building classification. The waiver does not extend to B-2 Residential Remodeling, to Class A General Engineering or to any C-series specialty classification. It does not waive the Law and Business examination, the experience requirement, the bond, the insurance requirements or any fee. Results reach CSLB through your NASCLA account, which you use to ask that they be shared with California.
- You must have held your Pennsylvania license for at least 5 years.
- Your Pennsylvania license must be active and in good standing.
- You must document at least 4 years of qualifying work experience.The experience section of the application must be completed even where the trade examination is waived. Technical training, apprenticeship training or education can be credited in place of part of the four years, but at least one year must be practical experience and the training must be documented. Business and Professions Code section 7068(h) requires the registrar to review experience gained in other states and confirm it was gained lawfully there. For the B classification CSLB expects proof of building and rebuilding work on a daily basis rather than occasional repairs.
- The qualifying individual is at least 18 years old and has a Social Security number or an Individual Taxpayer Identification Number. A qualifying individual may not hold another active contractor's license while acting as qualifier, except as allowed by Business and Professions Code section 7068.1.
What you'll do to get licensed in California
- 1Application fee. Pay the application fee ($450). Non-refundable original application fee of $450, covering one classification, payable with the Application for Original Contractor's License whether the application is by examination or by waiver. Adding a second classification on the same original application costs $150..
- 2License fee. Pay the license or certificate fee ($200). Initial license fee of $200 for a sole owner, or $350 for a non-sole owner, paid after the examination requirements are met and the remaining issuance documents are filed. It buys a two-year license. CSLB's own worked total for one classification is $650 for a sole owner and $800 for a non-sole owner, application fee included..
- 3Law / code exam. Pass a law, rules, or code exam. CSLB Law and Business examination, administered by PSI Exams. Every original applicant takes it, including anyone holding the NASCLA credential or applying under a named-state agreement..
- 4Trade exam. Pass the destination's trade exam (if applicable). B General Building trade examination, administered by PSI Exams. It is waived for a qualifying NASCLA holder, but CSLB retains the right to require the trade examination in any case where a waiver is granted. Where it is required, you have 18 months after CSLB accepts the application to pass both examinations; passing scores stay good for five years..
- 5Exam fee. Pay the exam fee. Rescheduling and re-examination fees are paid directly to PSI each time. CSLB does not publish the amounts on its fee list; they are in the Candidate Information Bulletin PSI sends with the Notice to Schedule an Examination, or ask CSLB on (800) 321-CSLB (2752). NASCLA sets its own fees for its examination and for sharing results..
- 6Background check. Complete a background check. Mandatory criminal background check by Live Scan fingerprinting after CSLB accepts the application. Paid to the Live Scan operator: $32 to the Department of Justice and $17 to the Federal Bureau of Investigation, plus a rolling fee that each site sets for itself and CSLB does not set..
- 7Surety bond. Post a surety bond ($25,000). Contractor's bond of $25,000, required by Business and Professions Code section 7071.6 before CSLB can issue an active license. It must be written by a surety licensed through the California Department of Insurance on a form approved by the Attorney General's Office, must name the business exactly as CSLB records it, and must reach CSLB headquarters within 90 days of its effective date. A cashier's check may be filed instead..
- 8Surety bond. Post a surety bond ($25,000) (if applicable). Bond of Qualifying Individual, $25,000, required by Business and Professions Code section 7071.9 when the license is qualified by a responsible managing employee, or by a responsible managing officer who owns less than 10 percent of the corporation's voting stock. An RMO who owns 10 percent or more files a Bond of Qualifying Individual Exemption Certification instead. Each RME or RMO on a license must comply separately..
- 9Surety bond. Post a surety bond ($100,000) (if applicable). LLC employee/worker bond of $100,000, required by Business and Professions Code section 7071.6.5 only where the license is held by a limited liability company. It is in addition to the $25,000 contractor bond and protects employees against unpaid wages, interest on wages, fringe benefits and other contributions..
- 10Insurance. Carry the required insurance ($1,000,000) (if applicable). Liability insurance of at least $1,000,000 cumulative, required by Business and Professions Code section 7071.19 only where the license is held by a limited liability company with five or fewer people listed as personnel of record. Each additional member of the personnel of record adds $100,000, capped at $5,000,000. The policy must be written by an insurer licensed in California or an eligible surplus line insurer..
- 11Insurance. Carry the required insurance. Workers' compensation insurance, or a certificate of self-insurance from the Department of Industrial Relations, before CSLB will issue or activate the license if the business has employees. A business with no employees files an exemption instead, but CSLB will not accept an exemption where the license is qualified by a responsible managing employee, because an RME is an employee..
- 12Business license. Obtain a business license. The CSLB license is issued to a business entity: sole owner, partnership, corporation, limited liability company or joint venture. Form or register the entity first, since every officer, member, responsible manager or director must be listed as personnel of record. Cities and counties also require their own business tax registration or business license wherever you work, separately from the CSLB license..
- 13Other. Certification of Work Experience form for each period of experience claimed, completed by someone with firsthand knowledge of the work, plus the signed and dated statement requesting the NASCLA Commercial General Builders examination waiver and the sealed License Verification Request from your current licensing agency..
Published fees on this path total $650, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam · if applicable
- Exam fee
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $25,000
- Surety bond · $25,000 · if applicable
- Surety bond · $100,000 · if applicable
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · $1,000,000 · if applicable
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How California licenses general contractors
California general contractor · “B - General Building Contractor (Class A General Engineering is the separate fixed-works license)”
Statewide license
Issued by Contractors State License Board
California's unlimited building credential is the Class B General Building Contractor license from the Contractors State License Board (CSLB), and there is no dollar limit or tier system above it. Under Business and Professions Code section 7057 a general building contractor's principal business is structures requiring at least two unrelated building trades or crafts; a B contractor may not take a prime contract on a project involving other trades unless the contract needs at least two unrelated trades besides framing and carpentry, or it holds the relevant specialty classification, or it subcontracts to a licensed specialty contractor, and fire protection (C-16) and well drilling (C-57) always need the specialty license or a subcontractor. Class A General Engineering is a parallel classification rather than a grade above B: it covers fixed works requiring specialized engineering knowledge such as highways, bridges, tunnels, dams, pipelines, sewers, grading and earthmoving, and a contractor who does both kinds of work holds both classifications. Below B sits B-2 Residential Remodeling, limited to existing residential wood frame structures and contracts using three unrelated trades. CSLB issues the license to a business entity and the person who meets the experience and examination requirements is named on it as the qualifying individual, a responsible managing employee (RME) or responsible managing officer (RMO), so an out-of-state general contractor moving to California applies as that qualifier. A license from another state cannot be used here even as a subcontractor or for a single project, and cities and counties additionally require a local business tax registration that does not replace the state license.
Why Pennsylvania has nothing to transfer
Pennsylvania general contractor · “General Contractor License / Contractor License (city-issued)”
Licensed by cities and counties
Issued by No state contractor authority; city building and licensing departments
Pennsylvania issues no general, commercial or building contractor license, and the Department of Labor and Industry says so on its own contractor licensing page: "The Commonwealth of Pennsylvania currently has no licensure or certification requirements for most construction contractors (or their employees)." The statewide registration that does exist, the Home Improvement Contractor registration with the Office of Attorney General, is no help on commercial work, because the Home Improvement Consumer Protection Act reaches only private residences of one or two units and expressly excludes the construction of a new home, services for commercial or business use performed away from a private residence, and the conversion of commercial buildings to residential use. What Pennsylvania licenses at state level is a short list of specific activities: crane operators through the State Board of Crane Operators, asbestos and lead removal through Labor and Industry, and manufactured housing installers through the Manufactured Housing Improvement Act. Commercial building is controlled by the city instead. Philadelphia requires a Contractor License of any business doing construction, demolition or repair that does not need a specialized trade license, Pittsburgh requires a General Contractor License for all work under a Commercial Building Development Application, and Scranton requires a General Contractor License for multi-family residential of three or more units, commercial, demolition and industrial work. Because there is no state contractor examination, there is nothing for the NASCLA Accredited Examination to stand in place of: no Pennsylvania authority publishes acceptance of it, and none of the three city programs mentions it. There is likewise no reciprocity anywhere in Pennsylvania at this level, so a commercial contractor moving here applies city by city and carries the insurance each city demands.
How local licensing works in Pennsylvania
How it works in Pennsylvania. No state board licenses, examines or qualifies building contractors, so there is no qualifying party, no state trade or business-law exam, no state bond, no financial-responsibility test and no state credential for another state's license to convert into. Cities that license do it under their own ordinances through a licenses and inspections department, and their credentials are valid only inside their own boundaries. Two of the three largest programs test nothing at all: they turn on insurance, tax compliance, identification and, in one case, a federal lead-safety certification. Only Scranton asks for a passing score, and even that has an experience-and-references alternative.
Philadelphia. A Contractor License from the Department of Licenses and Inspections "is required for any business doing work that: Involves construction, demolition, or repair [and] Does not require a specialized company license." Complete demolition, electrical, fire suppression and plumbing each need their own specialized license instead. The company must hold a Business Income and Receipts Tax ID and a Commercial Activity License, be current on all City taxes, and file a Certificate of Insurance showing general liability of $500,000 per occurrence, automobile liability of $300,000 and workers' compensation of $100,000 per accident, $100,000 per employee and a $500,000 policy limit. The one competency element is safety training: "You must identify the supervisors responsible for construction projects. A supervisor can only be employed by one company. They must also show proof of completion of an approved OSHA 30 safety training course taken within five years of application date." The license fee is $126 and the renewal fee is $126, with a non-refundable $20 application fee applied to the license fee and the balance due on approval; renewing more than 60 days late costs 1.5% of the license fee for every month since expiry. Renewal keeps the same conditions, except that a supervisor whose OSHA 30 certificate L&I has already accepted may take 30 hours of construction or demolition safety continuing education instead of retaking the course. Apply through eCLIPSE or at the Permit and License Center, 1401 John F. Kennedy Blvd.; applications are reviewed within five business days. The governing ordinance is Philadelphia Code Title 9-1004.
Pittsburgh. The Department of Permits, Licenses and Inspections issues just two contractor licenses, General Contractor and Sign Contractor, and they do not overlap. A General Contractor License is required for all work performed under a Commercial Building Development Application, for new one- or two-family dwellings, for renovations and additions to rental or investment residential properties, and for commercial and residential demolition permits. Bring a valid photo ID, a general liability certificate of at least $1,000,000 each occurrence and $2,000,000 general aggregate, a workers' compensation certificate, a Tax Compliance Letter from the City's Department of Finance, and an EPA Renovation, Repair and Painting certification in lead-safe construction practices, which lasts five years. The 2026 fee schedule prices the General Contractor license at $90.00 for the initial application and $90.00 for each annual renewal, with a $50.00 late fee. Licenses expire 365 days from the date of issuance, with a 60-day grace period and late fees from day 31, after which the license lapses and you start again. Applications are handled entirely through OneStopPGH; PLI is at 412 Boulevard of the Allies, 412-255-2175.
Scranton. Code Enforcement requires a General Contractor License for "any other work done on a multi-family residential (3+ units), commercial, demolition, industrial, et. al." The license is issued to a named individual rather than a company, runs the calendar year, and takes two possible routes. Option A is the minimum paperwork plus "Exam Results demonstrating a passing score on a UCC exam or ICC exam in the relevant subject" - for a builder, the ICC General Construction Contractor category - and costs $225.00. Option B replaces the exam with four years of practical experience documented by W-2s or 1099s (or two years plus four years of relevant post-secondary education, counting each year of education as half a year of experience) and three reference letters: one from a contractor who employed the applicant, one from an ICC- or UCC-certified inspector who has inspected the applicant's work, and one from a licensed design professional. Option B costs $250.00. Renewal is $175.00 with a $50.00 late fee, due before your first permit of the calendar year or by March 31, whichever comes first. Everyone files identification, an indemnification statement, a disclosure statement covering litigation and any license revocation or suspension "by the City or any other jurisdiction," general liability, property damage and public liability insurance of $500,000 per person and $1,000,000 per occurrence, workers' compensation or an affidavit of no employees, an unsworn affidavit under 18 Pa.C.S. § 4904, and a Single Tax Office registration number. Scranton enforces the 2018 ICC series.
Allegheny County. The county licenses no contractors. Its permits and licenses are road and bridge, dog, food facility, lead and asbestos abatement, marriage, passports, plumbing, swimming pool and facility rentals, so outside Pittsburgh city limits a commercial contractor deals with the municipality's own code office.
Everywhere else. Most Pennsylvania municipalities enforce the Uniform Construction Code through permits, plan review and third-party inspection agencies without licensing contractors at all, and the Act allows them to charge a reasonable fee for that. Check each municipality's code office before bidding.
Arriving from another state. Nothing transfers. There is no state application to file, no endorsement or reciprocity route to ask about, and no Pennsylvania authority that accepts the NASCLA Accredited Examination or any other out-of-state contractor examination in place of a requirement, because the Commonwealth sets no examination requirement at all. The practical work is registering the business in Pennsylvania, buying the liability and workers' compensation cover each city specifies, getting the supervisor's OSHA 30 card for Philadelphia and the EPA lead-safe certification for Pittsburgh, and applying separately in every city where you will pull permits. If you also do home improvement work on one- and two-unit homes, register with the Office of Attorney General as well; that requirement is described at the residential level.
Common questions
- Do I have to take the California general contractor exam if I'm licensed in Pennsylvania?
- The trade exam is waived, but California requires a law or code exam.
- How long do I need to have held my Pennsylvania license?
- At least 5 years before applying.
- What does it cost to get a California general contractor license from Pennsylvania?
- Published fees on this path total $650, not counting exam vendor fees or bonds.
- Do my Pennsylvania work hours count in California?
- Yes. Documented out-of-state experience counts toward California's eligibility requirements.
- Does it work the other way, from California to Pennsylvania?
- Not necessarily. Reciprocity is directed. Going from California to Pennsylvania, the mechanism is not applicable.
Sources
- California Business and Professions Code Sec. 7068 - Qualification of applicants; responsible managing employee; out-of-state experience · Cal. Bus. & Prof. Code Sec. 7068 · California Legislative Information (Office of Legislative Counsel) · Statute · verified September 17, 2026
- CSLB - Bond Requirements · Cal. Bus. & Prof. Code Sec. 7071.6, 7071.8, 7071.9 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - A General Engineering Contractor classification · Cal. Bus. & Prof. Code Sec. 7056 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - B General Building Contractor classification · Cal. Bus. & Prof. Code Sec. 7057 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - B-2 Residential Remodeling Contractor classification · Cal. Bus. & Prof. Code Sec. 7057.5 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - List of All CSLB Fees · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - Get Licensed to Build: A Guide to Becoming a Licensed Contractor (May 2025) · Contractors State License Board · Other · verified September 17, 2026
- CSLB - Frequently Asked Questions About Journey-level Experience · Contractors State License Board · Faq · verified September 17, 2026
- Contractors State License Law - 2026 CSLB Law Book (B&P Code Division 3, Chapter 9 and 16 CCR Division 8) · Cal. Bus. & Prof. Code Sec. 7065.4, 7068; former Sec. 7067.5 (repealed 2016); 16 CCR Div. 8 · Contractors State License Board · Statute · verified September 17, 2026
- CSLB - Licenses for Limited Liability Companies (LLC) · Cal. Bus. & Prof. Code Sec. 7065, 7071.6.5, 7071.19, 7076.2 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - If You Already Have a Contractors License From Another State or Country · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - Processing Times · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - Reciprocity Requirements · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - License Verification Request (reciprocity) · Contractors State License Board · Form · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.