Pennsylvania to Georgia: general contractor license reciprocity
Pennsylvania does not issue a statewide general contractor license, so there is nothing to transfer. Here is Georgia's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Licensure using the NASCLA Accredited Examination (any state, no agreement needed)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Georgia's own trade examination for the General Contractor and General Contractor Limited Tier licenses is the NASCLA Accredited Examination for Commercial General Building Contractors, so a contractor arriving from any state who has already passed it does not sit a separate Georgia trade examination. You release your NASCLA transcript to the Board with the application and, once the Board approves you, take the Georgia Business and Law examination through PSI; that examination is never waived. If you have not taken the NASCLA examination, it is the examination you will be approved to sit, and it is available to candidates in any participating state. Everything outside the trade examination still has to be met on its own: the Board's experience routes, a minimum net worth of $150,000 for the standard tier or $25,000 for the Limited Tier, $500,000 per occurrence of general liability insurance, workers compensation once the business has three or more employees in Georgia, and Georgia Corporations Division registration if the license will be held by a company. Out-of-state experience counts toward eligibility; the Board does not require the work or the supporting commercial project to have been performed in Georgia.
This is the NASCLA pathway, and in Georgia it is the ordinary pathway rather than an alternative one: the Board's licensure comparison chart lists the NASCLA Accredited Examination and the Georgia Business and Law examination as the examination requirements for both general tiers, and every General Contractor application checklist asks for NASCLA transcripts. The Board accepts NASCLA in the General Contractor Division only; the residential classifications have their own Georgia examinations. Applications are filed in the GOALS portal and generally processed within 20 business days, with a deficiency letter restarting the count and a 60-day cure window. Exam approval letters are valid for one year and allow three sittings; the old examination-exemption or grandfathering route has closed. General contractor licenses renew by 30 June of even-numbered years and carry no continuing education requirement.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
- Typical processing
- About 20 days
What you must already have
- You must have passed a licensing exam in Pennsylvania that the destination considers comparable.The Board's licensure comparison chart names the NASCLA Accredited Examination for Commercial General Building Contractors as the examination requirement for both the General Contractor and the General Contractor Limited Tier license, alongside the Georgia Business and Law examination. A NASCLA certificate earned while licensed in another participating state therefore satisfies Georgia's trade examination outright; you release the NASCLA transcript to the Board with the application. The NASCLA examination is origin-independent and is not a reciprocal agreement with any state, and it does not waive the Georgia Business and Law examination or any application, experience, net worth or insurance requirement.
- At least 21 years old.
- One of the Board's three experience routes: a four-year degree in engineering, architecture, construction management, building construction or a related field acceptable to the Division, plus one year working as or for a general contractor; accredited college coursework plus practical experience totaling four years; or at least four years of active construction experience, of which two were as or for a general contractor and one in estimating, engineering, supervision or project management.
- At least one commercial project, within five years of the application, on which you had general oversight and primary management responsibility as supervisor for its successful performance and completion. The Board does not require the project to have been in Georgia.
What you'll do to get licensed in Georgia
- 1Law / code exam. Pass a law, rules, or code exam. Georgia Business and Law examination, taken through PSI after the Board approves the application. It is required of every general contractor applicant, including NASCLA holders and reciprocity applicants, and is never waived..
- 2Trade exam. Pass the destination's trade exam (if applicable). NASCLA Accredited Examination for Commercial General Building Contractors. Shown as optional because applicants who already hold it simply release the transcript to the Board; applicants who do not will be approved to sit it, and it is administered by NASCLA rather than by Georgia, so it can be taken in any participating state before or after applying here..
- 3Application fee. Pay the application fee. A non-refundable application fee is due with the online application. The Board does not print the amount on its how-to guides; the current amount is on the fee schedule in the GOALS portal at https://goals.sos.ga.gov/, and the Board can be reached at (404) 424-9966..
- 4Exam fee. Pay the exam fee. Examination fees paid to the testing organization when each examination is scheduled: PSI for the Georgia Business and Law examination and NASCLA for the accredited examination and its transcript. The Board does not publish either fee..
- 5Financial responsibility. Show financial responsibility of at least $150,000. An affirmed minimum net worth of $150,000 for a General Contractor license, or $25,000 for the General Contractor Limited Tier, supported by the net worth affirmation or financial documents the application asks for. If you are applying as a qualifying agent the net worth must be the business organization's, not yours. Unlike the residential division, the general division does not offer a surety bond, line of credit or letter of credit as a substitute for the net worth affirmation..
- 6Insurance. Carry the required insurance ($500,000). General liability insurance of at least $500,000 per occurrence for both general tiers, evidenced by a signed current certificate of insurance naming the State Licensing Board for Residential and General Contractors, 237 Coliseum Drive, Macon, GA 31217 as certificate holder. Binders, information pages, policies and declaration pages are not accepted. An individual applicant must be the named insured; a qualifying agent's coverage must be in the company's name. Workers compensation insurance is required once the business has three or more employees in Georgia..
- 7Business license. Obtain a business license. If the license will be held by a company rather than by you personally, that business organization must be registered with the Georgia Corporations Division and, if formed outside Georgia, hold a Certificate of Authority to transact business here; you then apply as its qualifying agent. An individual license does not let you perform work on behalf of any LLC or corporation, even one you own outright..
- 8Contractor license. Hold or obtain a contractor license (if applicable). A general contractor license does not authorize electrical, plumbing, conditioned air, low voltage or utility work. Under O.C.G.A. 43-41-2(5) that work must be performed by someone licensed for it under Title 43 Chapter 14, whether a subcontractor or a separately licensed member of your own organization..
- 9Other. Supporting documents filed with the application: the work experience record and employment affidavit, a project reference affidavit for the qualifying commercial project, an official college transcript, diploma or certificate where you are qualifying on education, a Secure and Verifiable Document such as a driver license or passport with an affidavit of lawful presence under O.C.G.A. 50-36-1, a list of affiliations, bankruptcy documents if applicable, and disclosure of any disciplinary action or sanctions with supporting court documents and a letter of explanation..
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam · if applicable
- Exam fee
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · $500,000
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Georgia licenses general contractors
Georgia general contractor · “General Contractor (also General Contractor Limited Tier, capped at $1,000,000 per contract)”
Statewide license
Georgia licenses commercial general contractors statewide through the General Contractor Division of the State Licensing Board for Residential and General Contractors, part of the Secretary of State's Professional Licensing Boards Division. A General Contractor license is unlimited as to the type of work and carries no financial limit on any project; the General Contractor Limited Tier is the same license capped at contracts of no more than $1,000,000. Neither license covers electrical, plumbing, conditioned air, low voltage or utility work, which must be performed by contractors licensed under O.C.G.A. Title 43 Chapter 14. As in the residential division the credential is usually entity-held: an individual license only covers work in your own name or as a sole proprietorship, and to contract through a company you apply as its qualifying agent, the person with final approval authority over its construction work, contracts and related financial affairs, with the financial and insurance proofs in the company's name. What makes Georgia unusual for an inbound contractor is the examination: the Board's own trade examination for both general tiers is the NASCLA Accredited Examination for Commercial General Building Contractors, so a NASCLA certificate earned in another state already satisfies it. The Georgia Business and Law examination is always separate and is never waived, including for reciprocity applicants.
Why Pennsylvania has nothing to transfer
Pennsylvania general contractor · “General Contractor License / Contractor License (city-issued)”
Licensed by cities and counties
Issued by No state contractor authority; city building and licensing departments
Pennsylvania issues no general, commercial or building contractor license, and the Department of Labor and Industry says so on its own contractor licensing page: "The Commonwealth of Pennsylvania currently has no licensure or certification requirements for most construction contractors (or their employees)." The statewide registration that does exist, the Home Improvement Contractor registration with the Office of Attorney General, is no help on commercial work, because the Home Improvement Consumer Protection Act reaches only private residences of one or two units and expressly excludes the construction of a new home, services for commercial or business use performed away from a private residence, and the conversion of commercial buildings to residential use. What Pennsylvania licenses at state level is a short list of specific activities: crane operators through the State Board of Crane Operators, asbestos and lead removal through Labor and Industry, and manufactured housing installers through the Manufactured Housing Improvement Act. Commercial building is controlled by the city instead. Philadelphia requires a Contractor License of any business doing construction, demolition or repair that does not need a specialized trade license, Pittsburgh requires a General Contractor License for all work under a Commercial Building Development Application, and Scranton requires a General Contractor License for multi-family residential of three or more units, commercial, demolition and industrial work. Because there is no state contractor examination, there is nothing for the NASCLA Accredited Examination to stand in place of: no Pennsylvania authority publishes acceptance of it, and none of the three city programs mentions it. There is likewise no reciprocity anywhere in Pennsylvania at this level, so a commercial contractor moving here applies city by city and carries the insurance each city demands.
How local licensing works in Pennsylvania
How it works in Pennsylvania. No state board licenses, examines or qualifies building contractors, so there is no qualifying party, no state trade or business-law exam, no state bond, no financial-responsibility test and no state credential for another state's license to convert into. Cities that license do it under their own ordinances through a licenses and inspections department, and their credentials are valid only inside their own boundaries. Two of the three largest programs test nothing at all: they turn on insurance, tax compliance, identification and, in one case, a federal lead-safety certification. Only Scranton asks for a passing score, and even that has an experience-and-references alternative.
Philadelphia. A Contractor License from the Department of Licenses and Inspections "is required for any business doing work that: Involves construction, demolition, or repair [and] Does not require a specialized company license." Complete demolition, electrical, fire suppression and plumbing each need their own specialized license instead. The company must hold a Business Income and Receipts Tax ID and a Commercial Activity License, be current on all City taxes, and file a Certificate of Insurance showing general liability of $500,000 per occurrence, automobile liability of $300,000 and workers' compensation of $100,000 per accident, $100,000 per employee and a $500,000 policy limit. The one competency element is safety training: "You must identify the supervisors responsible for construction projects. A supervisor can only be employed by one company. They must also show proof of completion of an approved OSHA 30 safety training course taken within five years of application date." The license fee is $126 and the renewal fee is $126, with a non-refundable $20 application fee applied to the license fee and the balance due on approval; renewing more than 60 days late costs 1.5% of the license fee for every month since expiry. Renewal keeps the same conditions, except that a supervisor whose OSHA 30 certificate L&I has already accepted may take 30 hours of construction or demolition safety continuing education instead of retaking the course. Apply through eCLIPSE or at the Permit and License Center, 1401 John F. Kennedy Blvd.; applications are reviewed within five business days. The governing ordinance is Philadelphia Code Title 9-1004.
Pittsburgh. The Department of Permits, Licenses and Inspections issues just two contractor licenses, General Contractor and Sign Contractor, and they do not overlap. A General Contractor License is required for all work performed under a Commercial Building Development Application, for new one- or two-family dwellings, for renovations and additions to rental or investment residential properties, and for commercial and residential demolition permits. Bring a valid photo ID, a general liability certificate of at least $1,000,000 each occurrence and $2,000,000 general aggregate, a workers' compensation certificate, a Tax Compliance Letter from the City's Department of Finance, and an EPA Renovation, Repair and Painting certification in lead-safe construction practices, which lasts five years. The 2026 fee schedule prices the General Contractor license at $90.00 for the initial application and $90.00 for each annual renewal, with a $50.00 late fee. Licenses expire 365 days from the date of issuance, with a 60-day grace period and late fees from day 31, after which the license lapses and you start again. Applications are handled entirely through OneStopPGH; PLI is at 412 Boulevard of the Allies, 412-255-2175.
Scranton. Code Enforcement requires a General Contractor License for "any other work done on a multi-family residential (3+ units), commercial, demolition, industrial, et. al." The license is issued to a named individual rather than a company, runs the calendar year, and takes two possible routes. Option A is the minimum paperwork plus "Exam Results demonstrating a passing score on a UCC exam or ICC exam in the relevant subject" - for a builder, the ICC General Construction Contractor category - and costs $225.00. Option B replaces the exam with four years of practical experience documented by W-2s or 1099s (or two years plus four years of relevant post-secondary education, counting each year of education as half a year of experience) and three reference letters: one from a contractor who employed the applicant, one from an ICC- or UCC-certified inspector who has inspected the applicant's work, and one from a licensed design professional. Option B costs $250.00. Renewal is $175.00 with a $50.00 late fee, due before your first permit of the calendar year or by March 31, whichever comes first. Everyone files identification, an indemnification statement, a disclosure statement covering litigation and any license revocation or suspension "by the City or any other jurisdiction," general liability, property damage and public liability insurance of $500,000 per person and $1,000,000 per occurrence, workers' compensation or an affidavit of no employees, an unsworn affidavit under 18 Pa.C.S. § 4904, and a Single Tax Office registration number. Scranton enforces the 2018 ICC series.
Allegheny County. The county licenses no contractors. Its permits and licenses are road and bridge, dog, food facility, lead and asbestos abatement, marriage, passports, plumbing, swimming pool and facility rentals, so outside Pittsburgh city limits a commercial contractor deals with the municipality's own code office.
Everywhere else. Most Pennsylvania municipalities enforce the Uniform Construction Code through permits, plan review and third-party inspection agencies without licensing contractors at all, and the Act allows them to charge a reasonable fee for that. Check each municipality's code office before bidding.
Arriving from another state. Nothing transfers. There is no state application to file, no endorsement or reciprocity route to ask about, and no Pennsylvania authority that accepts the NASCLA Accredited Examination or any other out-of-state contractor examination in place of a requirement, because the Commonwealth sets no examination requirement at all. The practical work is registering the business in Pennsylvania, buying the liability and workers' compensation cover each city specifies, getting the supervisor's OSHA 30 card for Philadelphia and the EPA lead-safe certification for Pittsburgh, and applying separately in every city where you will pull permits. If you also do home improvement work on one- and two-unit homes, register with the Office of Attorney General as well; that requirement is described at the residential level.
Common questions
- Do I have to take the Georgia general contractor exam if I'm licensed in Pennsylvania?
- The trade exam is waived, but Georgia requires a law or code exam.
- Do my Pennsylvania work hours count in Georgia?
- Yes. Documented out-of-state experience counts toward Georgia's eligibility requirements.
- How long does the application take?
- The board's published or typical processing time is about 20 days.
- Does it work the other way, from Georgia to Pennsylvania?
- Not necessarily. Reciprocity is directed. Going from Georgia to Pennsylvania, the mechanism is not applicable.
Sources
- O.C.G.A. Title 43, Chapter 41 - Residential and General Contractors (Board law as published by the Board) · O.C.G.A. 43-41-2, 43-41-5(b), 43-41-6, 43-41-7(2), 43-41-8(a)(3), 43-41-9, 43-41-17 · Georgia Secretary of State, State Licensing Board for Residential and General Contractors · Statute · verified September 17, 2026
- Ga. Comp. R. & Regs. Chapter 553-4 - Qualifications for Licensure, General Contractor Division · Ga. Comp. R. & Regs. 553-4-.01 through 553-4-.07 · Georgia Secretary of State, Rules and Regulations of the State of Georgia · Admin Rule · verified September 17, 2026
- State Licensing Board for Residential and Commercial General Contractors · Georgia Secretary of State, Professional Licensing Boards Division · Agency Page · verified September 17, 2026
- Licensure Comparison Chart - State Licensing Board for Residential and General Contractors (Revised 02/25) · O.C.G.A. 43-41-2(5), (9), (10), (11); 43-41-17 · Georgia Secretary of State, State Licensing Board for Residential and General Contractors · Other · verified September 17, 2026
- Residential and Commercial General Contractors - Frequently Asked Questions · Georgia Secretary of State, Professional Licensing Boards Division · Faq · verified September 17, 2026
- General Contractors: How to Guide (all General Contractor application types) · Georgia Secretary of State, Professional Licensing Boards Division · Agency Page · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.