Pennsylvania to Mississippi: general contractor license reciprocity
Pennsylvania does not issue a statewide general contractor license, so there is nothing to transfer. Here is Mississippi's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Building Construction license using the NASCLA Accredited Examination or the Universal Recognition of Occupational Licenses Act
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Mississippi accepts the NASCLA Accredited Examination for Commercial General Building Contractors in place of its own Building Construction trade examination, so an out-of-state contractor from any state can avoid the Mississippi-specific trade test. The board's classifications page marks Building Construction "(Trade or NASCLA accredited exam accepted)", its commercial application tells applicants for that major classification that they "may choose to take the Mississippi state exam or the NASCLA national accredited exam", and the PSI candidate bulletin carries both side by side: the Mississippi Building Construction examination is 80 questions in 3 hours at 70% to pass, the NASCLA examination 115 questions in 330 minutes with a minimum score of 81. Separately, an individual who establishes residency in Mississippi and holds a current license of similar scope in another state, held for at least one year, may file Form UROL with the application under the Universal Recognition of Occupational Licenses Act (Miss. Code Ann. 73-50-2) and have the trade examination waived outright; the same form covers an applicant who worked in a similar scope of practice for at least three years in a state that does not regulate construction at state level. Neither route touches the Mississippi Law and Business Management examination, the $400 application fee, the CPA-reviewed financial statement, the insurance certificate or the board's review of the application. An applicant who uses neither route simply sits the Mississippi Building Construction examination.
The NASCLA examination is booked through PSI on the Mississippi eligibility like any other portion, and passing candidates can release their transcript to other jurisdictions through NASCLA's National Examination Database. It is an exam credential rather than a license, and Mississippi does not carry it across to the residential level. Board Rule Part 802 Ch. 1, R. 1.1(2)(o) separately lets the Executive Director adopt as the required standardized examination any comparable examination passed by an applicant who holds a license in good standing in a comparable classification in a recognized reciprocity state, which is the authority behind the named-state agreements listed on this page. Once the file is complete the board reviews applications weekly, submitting them on Fridays and issuing approved licenses the following Wednesday, so the seven working days shown is board review time and not the whole process, and an application left incomplete for 180 days is destroyed. Eligibility to test lasts six months with unlimited retakes inside that window. Ask a licensing agent at (601) 354-6161 or (800) 880-6161 which examinations you owe before registering with PSI.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
- Typical processing
- About 7 days
What you must already have
- You must have passed a licensing exam in Pennsylvania that the destination considers comparable.The examination is 115 questions over 330 minutes with a minimum passing score of 81, and it is origin-independent: any candidate may sit it, and holding a license in another NASCLA state is not what makes it count. Mississippi names it on its classifications page, its reciprocity page, its FAQ, its Testing page and in the commercial application, and the PSI bulletin lets a Mississippi candidate elect it instead of the state-specific exam. It does not waive the Mississippi Law and Business Management examination. Mississippi accepts it for Building Construction and, in the electrical trade, accepts the NASCLA Accredited Electrical Examination for Master Electrical; it accepts no NASCLA examination for any residential classification.
- The qualifying party must be an owner, officer or responsible managing employee who is genuinely employed by the applicant, actively engaged in the licensed work and able to supervise or perform it, and may qualify no more than three companies without the board's permission. Mississippi sets no minimum apprenticeship or trade hours for a commercial certificate.
- Your Pennsylvania license must be active and in good standing.The alternative on Form UROL is three years of work in a similar scope of practice in a state that does not regulate construction at state level, supported by references naming three completed jobs.
- You must have held your Pennsylvania license for at least 1 year.Universal Recognition route only: Form UROL requires the out-of-state license to have been held for at least one year.
- Universal Recognition route only: proof of Mississippi residency, by state identification card, a current Mississippi residential utility bill, ownership or lease of a Mississippi residence, documentation of in-state employment or a notarized promise of employment for the applicant or spouse, or other verifiable documentation.The board's 2026 application packets state that the Act applies to individuals who establish residence in Mississippi after July 1, 2021, and that filing the form does not by itself guarantee licensure.
What you'll do to get licensed in Mississippi
- 1Law / code exam. Pass a law, rules, or code exam. Mississippi Law and Business Management examination through PSI: 50 questions, 2 hours, 70% to pass, open book. Every applicant for a Mississippi contractor license takes it, and no exam waiver agreement, NASCLA credential or universal-recognition waiver removes it..
- 2Trade exam. Pass the destination's trade exam. Mississippi Building Construction examination through PSI: 80 questions, 3 hours, 70% to pass, open book. An applicant may instead sit the NASCLA Accredited Examination for Commercial General Building Contractors, which Mississippi accepts for this classification..
- 3Application fee. Pay the application fee ($400). Commercial application fee of $400, which includes one trade classification. Each additional classification requested costs a further $100. Fees are not refundable and must be paid by check or money order. The annual renewal fee is also $400..
- 4Exam fee. Pay the exam fee ($120). PSI registration fee: $120 for one examination portion, $240 for two. The fee is charged for each registration, whether the examination is a first attempt or a repeat, and is not refundable or transferable..
- 5Financial responsibility. Show financial responsibility of at least $50,000. Reviewed or audited financial statement prepared and signed by a certified public accountant within the last twelve months, showing a net worth of at least $50,000 for a major classification such as Building Construction, or at least $20,000 for a specialty classification. A compilation is not accepted and the board states the requirement cannot be waived or substituted; there is no bond alternative, because Mississippi issues only an unlimited commercial license rather than monetary limitation tiers. The figure shown is the major-classification minimum..
- 6Insurance. Carry the required insurance. Certificate of general liability insurance showing at least $300,000 per occurrence and $600,000 aggregate, with the Mississippi State Board of Contractors named as certificate holder so it is notified if coverage is cancelled. The name insured must match the name the license is issued in. A workers compensation certificate is also required if the applicant has five or more employees..
- 7Business license. Obtain a business license. The certificate of responsibility is issued to a legal entity, so a corporation, LLC, LLP or limited partnership must be registered with the Mississippi Secretary of State and show proof of good standing before the license issues, and a company domiciled outside Mississippi must first qualify to do business in the State. Commercial applicants must also supply a Mississippi sales tax or use tax number and a Mississippi income tax or federal tax identification number..
- 8Other. Three reference letters, one of which must come from the applicant's bank or financial institution; a list of at least three completed jobs in the classification being applied for, which may be work done outside Mississippi; and proof that the qualifying party is employed by the applicant, by check stub, W-2 or a Secretary of State officer listing..
Published fees on this path total $520, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam
- Exam fee · $120
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Mississippi licenses general contractors
Mississippi general contractor · “Certificate of Responsibility, Building Construction classification”
Statewide license
Issued by Mississippi State Board of Contractors (MSBOC)
Mississippi's unlimited tier is the Certificate of Responsibility issued by the Mississippi State Board of Contractors in the Building Construction major classification. A commercial license is required of every contractor and subcontractor of any tier on a public or private project of $50,000 or more (Miss. Code Ann. 31-3-1), and Building Construction covers the construction of commercial buildings and single- or multiple-dwelling residential structures, together with additions, alterations, conversions, expansions, reconstruction, renovations and the associated landscaping, earthwork, parking areas, driveways and sidewalks. Holding the major classification entitles the licensee to perform every specialty classification listed beneath it; one classification is included in the application fee and each further one costs $100. The board states that it offers only an unlimited license, so there are no monetary limitation bands: instead every commercial applicant proves financial responsibility with a CPA-reviewed or audited statement showing a net worth of at least $50,000 for a major classification, or $20,000 for a specialty, with no bond substitute. The certificate belongs to the business and is qualified by a named person - an owner, officer or responsible managing employee who takes the examinations, must be genuinely employed by the certificate holder, and may qualify no more than three companies at once - so a contractor moving to Mississippi applies as or for the entity that will bid the work.
Why Pennsylvania has nothing to transfer
Pennsylvania general contractor · “General Contractor License / Contractor License (city-issued)”
Licensed by cities and counties
Issued by No state contractor authority; city building and licensing departments
Pennsylvania issues no general, commercial or building contractor license, and the Department of Labor and Industry says so on its own contractor licensing page: "The Commonwealth of Pennsylvania currently has no licensure or certification requirements for most construction contractors (or their employees)." The statewide registration that does exist, the Home Improvement Contractor registration with the Office of Attorney General, is no help on commercial work, because the Home Improvement Consumer Protection Act reaches only private residences of one or two units and expressly excludes the construction of a new home, services for commercial or business use performed away from a private residence, and the conversion of commercial buildings to residential use. What Pennsylvania licenses at state level is a short list of specific activities: crane operators through the State Board of Crane Operators, asbestos and lead removal through Labor and Industry, and manufactured housing installers through the Manufactured Housing Improvement Act. Commercial building is controlled by the city instead. Philadelphia requires a Contractor License of any business doing construction, demolition or repair that does not need a specialized trade license, Pittsburgh requires a General Contractor License for all work under a Commercial Building Development Application, and Scranton requires a General Contractor License for multi-family residential of three or more units, commercial, demolition and industrial work. Because there is no state contractor examination, there is nothing for the NASCLA Accredited Examination to stand in place of: no Pennsylvania authority publishes acceptance of it, and none of the three city programs mentions it. There is likewise no reciprocity anywhere in Pennsylvania at this level, so a commercial contractor moving here applies city by city and carries the insurance each city demands.
How local licensing works in Pennsylvania
How it works in Pennsylvania. No state board licenses, examines or qualifies building contractors, so there is no qualifying party, no state trade or business-law exam, no state bond, no financial-responsibility test and no state credential for another state's license to convert into. Cities that license do it under their own ordinances through a licenses and inspections department, and their credentials are valid only inside their own boundaries. Two of the three largest programs test nothing at all: they turn on insurance, tax compliance, identification and, in one case, a federal lead-safety certification. Only Scranton asks for a passing score, and even that has an experience-and-references alternative.
Philadelphia. A Contractor License from the Department of Licenses and Inspections "is required for any business doing work that: Involves construction, demolition, or repair [and] Does not require a specialized company license." Complete demolition, electrical, fire suppression and plumbing each need their own specialized license instead. The company must hold a Business Income and Receipts Tax ID and a Commercial Activity License, be current on all City taxes, and file a Certificate of Insurance showing general liability of $500,000 per occurrence, automobile liability of $300,000 and workers' compensation of $100,000 per accident, $100,000 per employee and a $500,000 policy limit. The one competency element is safety training: "You must identify the supervisors responsible for construction projects. A supervisor can only be employed by one company. They must also show proof of completion of an approved OSHA 30 safety training course taken within five years of application date." The license fee is $126 and the renewal fee is $126, with a non-refundable $20 application fee applied to the license fee and the balance due on approval; renewing more than 60 days late costs 1.5% of the license fee for every month since expiry. Renewal keeps the same conditions, except that a supervisor whose OSHA 30 certificate L&I has already accepted may take 30 hours of construction or demolition safety continuing education instead of retaking the course. Apply through eCLIPSE or at the Permit and License Center, 1401 John F. Kennedy Blvd.; applications are reviewed within five business days. The governing ordinance is Philadelphia Code Title 9-1004.
Pittsburgh. The Department of Permits, Licenses and Inspections issues just two contractor licenses, General Contractor and Sign Contractor, and they do not overlap. A General Contractor License is required for all work performed under a Commercial Building Development Application, for new one- or two-family dwellings, for renovations and additions to rental or investment residential properties, and for commercial and residential demolition permits. Bring a valid photo ID, a general liability certificate of at least $1,000,000 each occurrence and $2,000,000 general aggregate, a workers' compensation certificate, a Tax Compliance Letter from the City's Department of Finance, and an EPA Renovation, Repair and Painting certification in lead-safe construction practices, which lasts five years. The 2026 fee schedule prices the General Contractor license at $90.00 for the initial application and $90.00 for each annual renewal, with a $50.00 late fee. Licenses expire 365 days from the date of issuance, with a 60-day grace period and late fees from day 31, after which the license lapses and you start again. Applications are handled entirely through OneStopPGH; PLI is at 412 Boulevard of the Allies, 412-255-2175.
Scranton. Code Enforcement requires a General Contractor License for "any other work done on a multi-family residential (3+ units), commercial, demolition, industrial, et. al." The license is issued to a named individual rather than a company, runs the calendar year, and takes two possible routes. Option A is the minimum paperwork plus "Exam Results demonstrating a passing score on a UCC exam or ICC exam in the relevant subject" - for a builder, the ICC General Construction Contractor category - and costs $225.00. Option B replaces the exam with four years of practical experience documented by W-2s or 1099s (or two years plus four years of relevant post-secondary education, counting each year of education as half a year of experience) and three reference letters: one from a contractor who employed the applicant, one from an ICC- or UCC-certified inspector who has inspected the applicant's work, and one from a licensed design professional. Option B costs $250.00. Renewal is $175.00 with a $50.00 late fee, due before your first permit of the calendar year or by March 31, whichever comes first. Everyone files identification, an indemnification statement, a disclosure statement covering litigation and any license revocation or suspension "by the City or any other jurisdiction," general liability, property damage and public liability insurance of $500,000 per person and $1,000,000 per occurrence, workers' compensation or an affidavit of no employees, an unsworn affidavit under 18 Pa.C.S. § 4904, and a Single Tax Office registration number. Scranton enforces the 2018 ICC series.
Allegheny County. The county licenses no contractors. Its permits and licenses are road and bridge, dog, food facility, lead and asbestos abatement, marriage, passports, plumbing, swimming pool and facility rentals, so outside Pittsburgh city limits a commercial contractor deals with the municipality's own code office.
Everywhere else. Most Pennsylvania municipalities enforce the Uniform Construction Code through permits, plan review and third-party inspection agencies without licensing contractors at all, and the Act allows them to charge a reasonable fee for that. Check each municipality's code office before bidding.
Arriving from another state. Nothing transfers. There is no state application to file, no endorsement or reciprocity route to ask about, and no Pennsylvania authority that accepts the NASCLA Accredited Examination or any other out-of-state contractor examination in place of a requirement, because the Commonwealth sets no examination requirement at all. The practical work is registering the business in Pennsylvania, buying the liability and workers' compensation cover each city specifies, getting the supervisor's OSHA 30 card for Philadelphia and the EPA lead-safe certification for Pittsburgh, and applying separately in every city where you will pull permits. If you also do home improvement work on one- and two-unit homes, register with the Office of Attorney General as well; that requirement is described at the residential level.
Common questions
- Do I have to take the Mississippi general contractor exam if I'm licensed in Pennsylvania?
- The trade exam is waived, but Mississippi requires a law or code exam.
- How long do I need to have held my Pennsylvania license?
- At least 1 year before applying.
- What does it cost to get a Mississippi general contractor license from Pennsylvania?
- Published fees on this path total $520, not counting exam vendor fees or bonds.
- Do my Pennsylvania work hours count in Mississippi?
- Yes. Documented out-of-state experience counts toward Mississippi's eligibility requirements.
- How long does the application take?
- The board's published or typical processing time is about 7 days.
- Does it work the other way, from Mississippi to Pennsylvania?
- Not necessarily. Reciprocity is directed. Going from Mississippi to Pennsylvania, the mechanism is not applicable.
Sources
- Mississippi State Board of Contractors - Classifications (Building Construction; Residential Builder; Residential Remodeler) · Miss. Code Ann. 31-3-13(h) (cited on the page) · Mississippi State Board of Contractors · Agency Page · verified September 17, 2026
- MSBOC Commercial Application for a Certificate of Responsibility (2026 revision) · Mississippi State Board of Contractors · Form · verified September 17, 2026
- Mississippi Commercial Contractor Laws and Rules (Miss. Code Title 31 Chapter 3 and Board Rules Part 802) · Miss. Code Ann. 31-3-1, 31-3-13, 31-3-15, 31-3-17; 30 Miss. Admin. Code Pt. 802, R. 1.1 · Mississippi State Board of Contractors · Admin Rule · verified September 17, 2026
- Mississippi State Board of Contractors - Frequently Asked Questions · Mississippi State Board of Contractors · Faq · verified September 17, 2026
- MSBOC Fee Schedule effective January 1, 2016 · Mississippi State Board of Contractors · Form · verified September 17, 2026
- Mississippi State Board of Contractors - Apply for a License (commercial and residential) · Mississippi State Board of Contractors · Agency Page · verified September 17, 2026
- State of Mississippi Contractor Examinations - PSI Candidate Information Bulletin · PSI Services LLC for the Mississippi State Board of Contractors · Other · verified September 17, 2026
- Mississippi State Board of Contractors - Reciprocity (trade-exam waiver agreements by origin board) · Miss. Code Ann. 73-50-1 and 73-50-2 (referenced on the page) · Mississippi State Board of Contractors · Agency Page · verified September 17, 2026
- Mississippi State Board of Contractors - What You Need to Know About Testing · Mississippi State Board of Contractors · Agency Page · verified September 17, 2026
- MSBOC Form UROL - Waiver of Exam pursuant to the Universal Recognition of Occupational Licenses Act · Miss. Code Ann. 73-50-2 · Mississippi State Board of Contractors · Form · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.