LicensebyState

Pennsylvania to New Mexico: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 12 sources

Pennsylvania does not issue a statewide general contractor license, so there is nothing to transfer. Here is New Mexico's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

GB-98 trade exam waived on the NASCLA Accredited Examination (every state)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

New Mexico runs no named-state contractor reciprocity: the only reciprocity the Construction Industries Division publishes is for the EE-98J electrical journeyman certificate, and holding another state's general contractor license is worth nothing on its own here. What CID does accept, from an applicant in any state, is the NASCLA Accredited Examination. Under 14.6.3.8(G)(2)(f) NMAC the bureau chief may waive the state-specific written trade exam for a Qualifying Party who passed the NASCLA general construction accredited examination, and CID's own Qualifying Party application limits that waiver to the GB-98 and EE-98 classifications, so at this level a NASCLA pass replaces the two-part GB-98 exam. Three things come with it: the candidate must have used the NASCLA scores to obtain a license in another state and held that license for at least a year, must attach a letter of good standing from that state, and must release the NASCLA transcript to New Mexico from the NASCLA website rather than sending a copy. Nothing else is waived. The four years (8,000 hours) of foreman-level experience, at least two of them commercial, must still be documented on notarized affidavits, the Business and Law exam or approved course still applies, and the company still files the bond, the tax registration certificate and the entity paperwork. An applicant without a NASCLA pass simply sits the GB-98 exam.

The rule says the bureau chief 'may waive' the trade exam, and CID verifies the NASCLA transcript itself after PSI accepts the application and the experience; if CID denies the waiver the applicant is contacted and registered for the full exam sequence, so do not stop studying while the transcript is being checked. The NASCLA waiver is not open at the GB-2 residential level. Out-of-state experience counts in full toward the 8,000 hours where it was gained working for a contractor licensed in the trade or was legal work in the state where it was performed, and an out-of-state contractor signing the affidavit attaches a copy of their current state license; accredited training counts at one-half year per year up to half the requirement, and estimating, project management and supervision do not count as hands-on. Once PSI approves the application, all remaining requirements must be met within six months or the fees are forfeited, exam scores are good for one year, and the trade and Business and Law results must be within a year of each other. NMSA 60-13-14(C) allows the division, with the commission's consent, to enter reciprocal licensing agreements with states having equivalent requirements; no such agreement covering a building classification has been published, so ask the Construction Industries Division before assuming one exists.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • You must have passed a licensing exam in Pennsylvania that the destination considers comparable.14.6.3.8(G)(2)(f) NMAC lets the bureau chief waive the state-specific written trade exam for a Qualifying Party who passed the NASCLA general construction accredited examination at the passing score, and CID's Qualifying Party application states the waiver is 'Applicable for Qualifying Party's applying for GB98 & EE98 ONLY' and that it 'removes the trade exam requirement ONLY'. The transcript must be released to New Mexico through the NASCLA website; CID verifies it directly. NASCLA is an exam credential rather than a license or an agreement between states, so it is available to a candidate from any state, and it waives no fee, bond, insurance, entity or experience requirement.
  • You must have held your Pennsylvania license for at least 1 year.CID's Qualifying Party application requires that the candidate 'must have taken the exam, used scores to obtain a license in another state, and held that license for a minimum of one year'. A NASCLA pass that was never used to obtain a license, or a license held for less than a year, does not support the waiver.
  • Your Pennsylvania license must be active and in good standing.
  • You must document at least 8,000 hours of qualifying work experience.Four years (8,000 hours) of foreman-level practical or related trade experience within the ten years immediately before application, of which at least two years must be commercial experience (14.6.6.9(B)(2) NMAC; NMSA 60-13-14(B)(8)). It is documented on notarized General Building Work Experience Verification affidavits, one per employer or affiant, completed by an employer, supervisor, foreman or other contractor, and the affidavit must say whether the experience was residential or commercial. The NASCLA waiver does not reduce it.
  • Experience must have been gained while employed by a contractor licensed in the trade being applied for, or be work that was legal in the state where it was performed. An out-of-state contractor certifying the experience attaches a copy of their current state license to the affidavit; where that state does not license the trade, proof that the company was active and valid is attached instead.

What you'll do to get licensed in New Mexico

  1. 1Application fee. Pay the application fee ($30). Non-refundable Qualifying Party application fee, paid to PSI with the notarized application, the work-experience affidavits and, for a NASCLA waiver, the letter of good standing from the licensing state. Complete packets go to the PSI Albuquerque office by hand or mail; faxed and emailed forms are not accepted..
  2. 2Other. Qualifying Party certificate fee, charged for each classification on the application (14.5.5.14(A) NMAC). With the $30 application fee this is the $36 the Construction Industries Division quotes for a single-classification Qualifying Party filing. ($6).
  3. 3Trade exam. Pass the destination's trade exam (if applicable). GB-98 General Building Contractor exam, required only where the NASCLA waiver is not used or is not granted. It is a two-part test administered by PSI: Part 1 is the GB-2 Residential Building Contractor paper, 80 questions in 225 minutes, and Part 2 is the commercial paper, 100 questions in 310 minutes, both open book and both needing 75% to pass. Part 2 covers sitework, concrete, masonry, carpentry, metals, roofing, associated trades, general code, plan reading and estimating, and OSHA safety against the 2021 New Mexico Commercial Building Code (14.7.2 NMAC) and the 2021 International Building Code. Both parts must be passed; a candidate who fails one part retakes only that part..
  4. 4Exam fee. Pay the exam fee ($269.06). PSI fee for the two-part GB-98 exam taken as a combination, which includes the GB-2 paper. A single part costs $134.53 as a retake. A candidate whose NASCLA waiver is approved pays no trade exam fee..
  5. 5Law / code exam. Pass a law, rules, or code exam. Contractor's Business and Law exam, required of all new Qualifying Party candidates and never waived by the NASCLA route: 50 questions, 130 minutes, open book, 75% (38 points) to pass, covering licensing requirements, estimating and bidding, business organization and financial management, tax and labor law, project management and lien law, contracts, risk management, and environment and safety. An approved Business and Law course taken with a CID-approved vendor may be completed in place of the exam, and an individual who is already an active Qualifying Party does not repeat it when adding a classification..
  6. 6Exam fee. Pay the exam fee ($68.88). PSI fee for the Business and Law exam..
  7. 7Contractor license. Hold or obtain a contractor license ($30). Non-refundable contractor license application fee paid to PSI by the business, filed with the notarized Contractor License Application, a copy of the Qualifying Party's certificate or passing score reports, and the Business and Law score or course certificate. A $6 certificate fee covering the license certificate and two wallet cards is charged with it..
  8. 8License fee. Pay the license or certificate fee ($300). Classification fee for GB-98, covering the full three-year license term on PSI's current schedule. Adding a GS specialty classification alongside it does not raise the total above $300 for the category. Late renewal costs $1 a day for the first 30 days and the equivalent of one year's fee from 30 to 90 days; after 90 days the license is cancelled and the business must reapply..
  9. 9Surety bond. Post a surety bond ($10,000). $10,000 code bond from a corporate surety authorized to transact business in New Mexico, issued in the exact name shown on the application and effective for the entire three-year license period. It is the statutory proof of responsibility, may be drawn on only to cure division-certified code violations the licensee has not corrected, and must be kept in force for the whole term; claims are limited to two years after final inspection or issuance of a certificate of occupancy. New Mexico sets no net worth, working capital or financial statement test for a contractor license..
  10. 10Insurance. Carry the required insurance. Workers' compensation coverage is required of every licensed entity, and failure to maintain it is cause for revocation of the license. A sole proprietor with no employees may be exempt; the Workers' Compensation Administration can confirm. An application is placed on hold while the applicant is out of compliance. CID does not require a general liability policy for the license itself, though owners and general contractors normally require one by contract..
  11. 11Business license. Obtain a business license. A registration certificate issued within the last twelve months by the New Mexico Taxation and Revenue Department in the exact name on the license application, plus proof of registration with the New Mexico Public Regulation Commission for a corporation or LLC, or with the Secretary of State for a limited liability partnership or limited partnership. A corporation, LLC, LP or LLP must be legally authorized to do business in New Mexico before the license issues, the proposed name must be cleared with PSI first, and each member of a joint venture must itself hold a New Mexico license..
  12. 12Background check. Complete a background check. CID reviews the application against the disqualifying felony convictions listed in 14.6.3.8(F) NMAC and may deny a license or certificate on that basis; sealed, dismissed, expunged or pardoned convictions and juvenile adjudications are not used. An application is also held where there are pending CID disciplinary actions, a workers' compensation compliance problem, a child support delinquency for the proposed Qualifying Party, or an open unlicensed-activity investigation..

Published fees on this path total $667.94, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam · if applicable
  • Exam fee · $269.06
  • Law / code exam
  • Exam fee · $68.88

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $10,000

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How New Mexico licenses general contractors

New Mexico general contractor · “GB-98 General Building Contractor

Statewide license

Verified September 17, 2026· 6 sources

Issued by New Mexico Regulation and Licensing Department, Construction Industries Division (CID), General Construction Bureau; licensing paperwork and exams handled by PSI

New Mexico's unlimited building tier is the GB-98 General Building classification issued by the Construction Industries Division: erect, alter, repair or demolish residential and commercial buildings and certain structures, including everything the GB-2 residential classification and the GF-5, GF-7 and GS specialty classifications cover, plus seal coating and striping of driveways and parking lots. There is no dollar cap on a GB-98 license, but it is a building classification rather than a universal one, so it excludes structures covered by the electrical (EE), mechanical and plumbing (MM), asphalt and concrete (GA) and fixed works (GF) classifications; the separate GA classifications run from GA-1, streets, roads and highways, through GA-98, and a GB-98 contractor may not prime a project whose major portion by dollar value falls in a GA classification or in most GF classifications. The license belongs to a business that employs or is owned by a Qualifying Party, and that individual is the one who documents the experience, passes the exams and holds a personal certificate of qualification. A GB-98 Qualifying Party needs four years (8,000 hours) of foreman-level experience within the last ten years, of which at least two years must be commercial, and must pass the two-part GB-98 exam and the Contractor's Business and Law exam or an approved course in its place. The entity files a $10,000 code bond and carries workers' compensation, and the license runs three years.

Moving to New MexicoLeaving New Mexico

Why Pennsylvania has nothing to transfer

Pennsylvania general contractor · “General Contractor License / Contractor License (city-issued)

Licensed by cities and counties

Verified September 17, 2026· 10 sources

Issued by No state contractor authority; city building and licensing departments

Pennsylvania issues no general, commercial or building contractor license, and the Department of Labor and Industry says so on its own contractor licensing page: "The Commonwealth of Pennsylvania currently has no licensure or certification requirements for most construction contractors (or their employees)." The statewide registration that does exist, the Home Improvement Contractor registration with the Office of Attorney General, is no help on commercial work, because the Home Improvement Consumer Protection Act reaches only private residences of one or two units and expressly excludes the construction of a new home, services for commercial or business use performed away from a private residence, and the conversion of commercial buildings to residential use. What Pennsylvania licenses at state level is a short list of specific activities: crane operators through the State Board of Crane Operators, asbestos and lead removal through Labor and Industry, and manufactured housing installers through the Manufactured Housing Improvement Act. Commercial building is controlled by the city instead. Philadelphia requires a Contractor License of any business doing construction, demolition or repair that does not need a specialized trade license, Pittsburgh requires a General Contractor License for all work under a Commercial Building Development Application, and Scranton requires a General Contractor License for multi-family residential of three or more units, commercial, demolition and industrial work. Because there is no state contractor examination, there is nothing for the NASCLA Accredited Examination to stand in place of: no Pennsylvania authority publishes acceptance of it, and none of the three city programs mentions it. There is likewise no reciprocity anywhere in Pennsylvania at this level, so a commercial contractor moving here applies city by city and carries the insurance each city demands.

How local licensing works in Pennsylvania

How it works in Pennsylvania. No state board licenses, examines or qualifies building contractors, so there is no qualifying party, no state trade or business-law exam, no state bond, no financial-responsibility test and no state credential for another state's license to convert into. Cities that license do it under their own ordinances through a licenses and inspections department, and their credentials are valid only inside their own boundaries. Two of the three largest programs test nothing at all: they turn on insurance, tax compliance, identification and, in one case, a federal lead-safety certification. Only Scranton asks for a passing score, and even that has an experience-and-references alternative.

Philadelphia. A Contractor License from the Department of Licenses and Inspections "is required for any business doing work that: Involves construction, demolition, or repair [and] Does not require a specialized company license." Complete demolition, electrical, fire suppression and plumbing each need their own specialized license instead. The company must hold a Business Income and Receipts Tax ID and a Commercial Activity License, be current on all City taxes, and file a Certificate of Insurance showing general liability of $500,000 per occurrence, automobile liability of $300,000 and workers' compensation of $100,000 per accident, $100,000 per employee and a $500,000 policy limit. The one competency element is safety training: "You must identify the supervisors responsible for construction projects. A supervisor can only be employed by one company. They must also show proof of completion of an approved OSHA 30 safety training course taken within five years of application date." The license fee is $126 and the renewal fee is $126, with a non-refundable $20 application fee applied to the license fee and the balance due on approval; renewing more than 60 days late costs 1.5% of the license fee for every month since expiry. Renewal keeps the same conditions, except that a supervisor whose OSHA 30 certificate L&I has already accepted may take 30 hours of construction or demolition safety continuing education instead of retaking the course. Apply through eCLIPSE or at the Permit and License Center, 1401 John F. Kennedy Blvd.; applications are reviewed within five business days. The governing ordinance is Philadelphia Code Title 9-1004.

Pittsburgh. The Department of Permits, Licenses and Inspections issues just two contractor licenses, General Contractor and Sign Contractor, and they do not overlap. A General Contractor License is required for all work performed under a Commercial Building Development Application, for new one- or two-family dwellings, for renovations and additions to rental or investment residential properties, and for commercial and residential demolition permits. Bring a valid photo ID, a general liability certificate of at least $1,000,000 each occurrence and $2,000,000 general aggregate, a workers' compensation certificate, a Tax Compliance Letter from the City's Department of Finance, and an EPA Renovation, Repair and Painting certification in lead-safe construction practices, which lasts five years. The 2026 fee schedule prices the General Contractor license at $90.00 for the initial application and $90.00 for each annual renewal, with a $50.00 late fee. Licenses expire 365 days from the date of issuance, with a 60-day grace period and late fees from day 31, after which the license lapses and you start again. Applications are handled entirely through OneStopPGH; PLI is at 412 Boulevard of the Allies, 412-255-2175.

Scranton. Code Enforcement requires a General Contractor License for "any other work done on a multi-family residential (3+ units), commercial, demolition, industrial, et. al." The license is issued to a named individual rather than a company, runs the calendar year, and takes two possible routes. Option A is the minimum paperwork plus "Exam Results demonstrating a passing score on a UCC exam or ICC exam in the relevant subject" - for a builder, the ICC General Construction Contractor category - and costs $225.00. Option B replaces the exam with four years of practical experience documented by W-2s or 1099s (or two years plus four years of relevant post-secondary education, counting each year of education as half a year of experience) and three reference letters: one from a contractor who employed the applicant, one from an ICC- or UCC-certified inspector who has inspected the applicant's work, and one from a licensed design professional. Option B costs $250.00. Renewal is $175.00 with a $50.00 late fee, due before your first permit of the calendar year or by March 31, whichever comes first. Everyone files identification, an indemnification statement, a disclosure statement covering litigation and any license revocation or suspension "by the City or any other jurisdiction," general liability, property damage and public liability insurance of $500,000 per person and $1,000,000 per occurrence, workers' compensation or an affidavit of no employees, an unsworn affidavit under 18 Pa.C.S. § 4904, and a Single Tax Office registration number. Scranton enforces the 2018 ICC series.

Allegheny County. The county licenses no contractors. Its permits and licenses are road and bridge, dog, food facility, lead and asbestos abatement, marriage, passports, plumbing, swimming pool and facility rentals, so outside Pittsburgh city limits a commercial contractor deals with the municipality's own code office.

Everywhere else. Most Pennsylvania municipalities enforce the Uniform Construction Code through permits, plan review and third-party inspection agencies without licensing contractors at all, and the Act allows them to charge a reasonable fee for that. Check each municipality's code office before bidding.

Arriving from another state. Nothing transfers. There is no state application to file, no endorsement or reciprocity route to ask about, and no Pennsylvania authority that accepts the NASCLA Accredited Examination or any other out-of-state contractor examination in place of a requirement, because the Commonwealth sets no examination requirement at all. The practical work is registering the business in Pennsylvania, buying the liability and workers' compensation cover each city specifies, getting the supervisor's OSHA 30 card for Philadelphia and the EPA lead-safe certification for Pittsburgh, and applying separately in every city where you will pull permits. If you also do home improvement work on one- and two-unit homes, register with the Office of Attorney General as well; that requirement is described at the residential level.

Moving to PennsylvaniaLeaving Pennsylvania

Common questions

Do I have to take the New Mexico general contractor exam if I'm licensed in Pennsylvania?
The trade exam is waived, but New Mexico requires a law or code exam.
How long do I need to have held my Pennsylvania license?
At least 1 year before applying.
What does it cost to get a New Mexico general contractor license from Pennsylvania?
Published fees on this path total $667.94, not counting exam vendor fees or bonds.
Do my Pennsylvania work hours count in New Mexico?
Yes. Documented out-of-state experience counts toward New Mexico's eligibility requirements.
Does it work the other way, from New Mexico to Pennsylvania?
Not necessarily. Reciprocity is directed. Going from New Mexico to Pennsylvania, the mechanism is not applicable.

Sources

  1. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
  2. Construction Industries Licensing Act, NMSA 1978 Chapter 60, Article 13 (RLD compilation as of July 1, 2021) · NMSA 1978 §§ 60-13-3, 60-13-14, 60-13-14.1, 60-13-23, 60-13-49 · New Mexico Regulation and Licensing Department · Statute · verified September 17, 2026
  3. 14.5.5 NMAC - Construction Industries General Provisions: Fees · 14.5.5.8 and 14.5.5.14 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
  4. 14.6.3 NMAC - Construction Industries Licensing: Contractor's License Requirements · 14.6.3.8 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
  5. 14.6.6 NMAC - Construction Industries Licensing: Classifications and Scopes of Work · 14.6.6.8 and 14.6.6.9 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
  6. NM CID - How to Obtain a Contractor License and Contractor License Application (updated October 2023) · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
  7. State of New Mexico Contractor (Qualifying Party) Examinations Candidate Information Bulletin (PSI) · PSI Services for the NM Construction Industries Division · Other · verified September 17, 2026
  8. New Mexico Contractor Licensing - Frequently Asked Questions (CID / PSI) · PSI Services for the New Mexico Construction Industries Division · Faq · verified September 17, 2026
  9. PSI General Building Work Experience Verification - New Mexico Contractor Licensing Service · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
  10. New Mexico Licensing Fees (CID contractor, qualifying party and journeyman fee schedule) · PSI Services for the New Mexico Construction Industries Division · Other · verified September 17, 2026
  11. NM CID Qualifying Party Certificate Application and Instructions (instructions updated May 2025, form updated August 2025) · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
  12. NM Regulation and Licensing Department - Apply for a Construction Industries License · New Mexico Regulation and Licensing Department, Construction Industries Division · Agency Page · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related