Pennsylvania to South Carolina: general contractor license reciprocity
South Carolina applies a specific rule to Pennsylvania general contractors.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Pennsylvania licensees: no building-classification waiver
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
The only Pennsylvania entry on South Carolina’s Technical Exam Waiver Agreements list is the Mechanical/Electrical examination administered by the City of Reading, which maps to the Electrical classification of the separate Mechanical Contractor license. No Pennsylvania examination is listed against the Building, Limited Building or Unlimited Building classifications, and no statewide Pennsylvania credential appears on the chart at all. The Board states that if your state is listed but your trade or classification is not listed, you are not eligible to apply by waiver or reciprocity. A general building contractor arriving from this state therefore uses the default route: pass the South Carolina Limited Building or Unlimited Building technical examination through PSI, or bring the NASCLA Accredited Examination for Commercial General Building Contractors, and pass the South Carolina Business Management & Law for Commercial Contractors examination either way.
The exam-waiver list does carry Pennsylvania entries for the separate Mechanical Contractor license, so a mechanical or electrical contractor from Pennsylvania may still qualify by waiver in those classifications. This rule is about the General Contractor building classifications only.
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
- Agreement
- Active
What you must already have
No eligibility conditions beyond holding the license are published for this path.
What you'll do to get licensed in South Carolina
No specific steps are published beyond the application itself.
How South Carolina licenses general contractors
South Carolina general contractor · “General Contractor license, Building classification (Limited Building or Unlimited Building), Group 1-5”
Statewide license
Issued by South Carolina Contractor’s Licensing Board (SC LLR)
Commercial and unlimited building work in South Carolina runs through the Contractor’s Licensing Board, which licenses General Contractors for any general contracting where the total cost of construction is more than $10,000. The license belongs to the business, not to the person: an individual, corporation, LLC or partnership holds it and must designate a Primary Qualifying Party for each classification, an individual in a management role who personally passes the examinations, so an inbound contractor applies as or for the entity that will sign contracts and pull permits. The Building classification covers commercial, industrial, institutional, modular and all other building construction including residential structures, and carries the Wood Frame Structures, Nonstructural Renovation, Masonry, Pre-engineered Metal Buildings, Roofing, Structural Framing and Miscellaneous Metals subclassifications. Every license also carries a group limit driven by money rather than skill: Group 1 bids and jobs up to $100,000 through to Group 5 with no cap, each set by working capital, net worth or a surety bond. The qualifying party for a Group 1, 2 or 3 license passes either the limited building contractor examination or the unlimited general contractor examination, while Groups 4 and 5 require the unlimited examination, and structures built under a limited building examination are restricted to three stories.
Why Pennsylvania has nothing to transfer
Pennsylvania general contractor · “General Contractor License / Contractor License (city-issued)”
Licensed by cities and counties
Issued by No state contractor authority; city building and licensing departments
Pennsylvania issues no general, commercial or building contractor license, and the Department of Labor and Industry says so on its own contractor licensing page: "The Commonwealth of Pennsylvania currently has no licensure or certification requirements for most construction contractors (or their employees)." The statewide registration that does exist, the Home Improvement Contractor registration with the Office of Attorney General, is no help on commercial work, because the Home Improvement Consumer Protection Act reaches only private residences of one or two units and expressly excludes the construction of a new home, services for commercial or business use performed away from a private residence, and the conversion of commercial buildings to residential use. What Pennsylvania licenses at state level is a short list of specific activities: crane operators through the State Board of Crane Operators, asbestos and lead removal through Labor and Industry, and manufactured housing installers through the Manufactured Housing Improvement Act. Commercial building is controlled by the city instead. Philadelphia requires a Contractor License of any business doing construction, demolition or repair that does not need a specialized trade license, Pittsburgh requires a General Contractor License for all work under a Commercial Building Development Application, and Scranton requires a General Contractor License for multi-family residential of three or more units, commercial, demolition and industrial work. Because there is no state contractor examination, there is nothing for the NASCLA Accredited Examination to stand in place of: no Pennsylvania authority publishes acceptance of it, and none of the three city programs mentions it. There is likewise no reciprocity anywhere in Pennsylvania at this level, so a commercial contractor moving here applies city by city and carries the insurance each city demands.
How local licensing works in Pennsylvania
How it works in Pennsylvania. No state board licenses, examines or qualifies building contractors, so there is no qualifying party, no state trade or business-law exam, no state bond, no financial-responsibility test and no state credential for another state's license to convert into. Cities that license do it under their own ordinances through a licenses and inspections department, and their credentials are valid only inside their own boundaries. Two of the three largest programs test nothing at all: they turn on insurance, tax compliance, identification and, in one case, a federal lead-safety certification. Only Scranton asks for a passing score, and even that has an experience-and-references alternative.
Philadelphia. A Contractor License from the Department of Licenses and Inspections "is required for any business doing work that: Involves construction, demolition, or repair [and] Does not require a specialized company license." Complete demolition, electrical, fire suppression and plumbing each need their own specialized license instead. The company must hold a Business Income and Receipts Tax ID and a Commercial Activity License, be current on all City taxes, and file a Certificate of Insurance showing general liability of $500,000 per occurrence, automobile liability of $300,000 and workers' compensation of $100,000 per accident, $100,000 per employee and a $500,000 policy limit. The one competency element is safety training: "You must identify the supervisors responsible for construction projects. A supervisor can only be employed by one company. They must also show proof of completion of an approved OSHA 30 safety training course taken within five years of application date." The license fee is $126 and the renewal fee is $126, with a non-refundable $20 application fee applied to the license fee and the balance due on approval; renewing more than 60 days late costs 1.5% of the license fee for every month since expiry. Renewal keeps the same conditions, except that a supervisor whose OSHA 30 certificate L&I has already accepted may take 30 hours of construction or demolition safety continuing education instead of retaking the course. Apply through eCLIPSE or at the Permit and License Center, 1401 John F. Kennedy Blvd.; applications are reviewed within five business days. The governing ordinance is Philadelphia Code Title 9-1004.
Pittsburgh. The Department of Permits, Licenses and Inspections issues just two contractor licenses, General Contractor and Sign Contractor, and they do not overlap. A General Contractor License is required for all work performed under a Commercial Building Development Application, for new one- or two-family dwellings, for renovations and additions to rental or investment residential properties, and for commercial and residential demolition permits. Bring a valid photo ID, a general liability certificate of at least $1,000,000 each occurrence and $2,000,000 general aggregate, a workers' compensation certificate, a Tax Compliance Letter from the City's Department of Finance, and an EPA Renovation, Repair and Painting certification in lead-safe construction practices, which lasts five years. The 2026 fee schedule prices the General Contractor license at $90.00 for the initial application and $90.00 for each annual renewal, with a $50.00 late fee. Licenses expire 365 days from the date of issuance, with a 60-day grace period and late fees from day 31, after which the license lapses and you start again. Applications are handled entirely through OneStopPGH; PLI is at 412 Boulevard of the Allies, 412-255-2175.
Scranton. Code Enforcement requires a General Contractor License for "any other work done on a multi-family residential (3+ units), commercial, demolition, industrial, et. al." The license is issued to a named individual rather than a company, runs the calendar year, and takes two possible routes. Option A is the minimum paperwork plus "Exam Results demonstrating a passing score on a UCC exam or ICC exam in the relevant subject" - for a builder, the ICC General Construction Contractor category - and costs $225.00. Option B replaces the exam with four years of practical experience documented by W-2s or 1099s (or two years plus four years of relevant post-secondary education, counting each year of education as half a year of experience) and three reference letters: one from a contractor who employed the applicant, one from an ICC- or UCC-certified inspector who has inspected the applicant's work, and one from a licensed design professional. Option B costs $250.00. Renewal is $175.00 with a $50.00 late fee, due before your first permit of the calendar year or by March 31, whichever comes first. Everyone files identification, an indemnification statement, a disclosure statement covering litigation and any license revocation or suspension "by the City or any other jurisdiction," general liability, property damage and public liability insurance of $500,000 per person and $1,000,000 per occurrence, workers' compensation or an affidavit of no employees, an unsworn affidavit under 18 Pa.C.S. § 4904, and a Single Tax Office registration number. Scranton enforces the 2018 ICC series.
Allegheny County. The county licenses no contractors. Its permits and licenses are road and bridge, dog, food facility, lead and asbestos abatement, marriage, passports, plumbing, swimming pool and facility rentals, so outside Pittsburgh city limits a commercial contractor deals with the municipality's own code office.
Everywhere else. Most Pennsylvania municipalities enforce the Uniform Construction Code through permits, plan review and third-party inspection agencies without licensing contractors at all, and the Act allows them to charge a reasonable fee for that. Check each municipality's code office before bidding.
Arriving from another state. Nothing transfers. There is no state application to file, no endorsement or reciprocity route to ask about, and no Pennsylvania authority that accepts the NASCLA Accredited Examination or any other out-of-state contractor examination in place of a requirement, because the Commonwealth sets no examination requirement at all. The practical work is registering the business in Pennsylvania, buying the liability and workers' compensation cover each city specifies, getting the supervisor's OSHA 30 card for Philadelphia and the EPA lead-safe certification for Pittsburgh, and applying separately in every city where you will pull permits. If you also do home improvement work on one- and two-unit homes, register with the Office of Attorney General as well; that requirement is described at the residential level.
Common questions
- Do I have to take the South Carolina general contractor exam if I'm licensed in Pennsylvania?
- Yes. South Carolina requires the trade exam on this path, plus a law or code exam.
- Do my Pennsylvania work hours count in South Carolina?
- Yes. Documented out-of-state experience counts toward South Carolina's eligibility requirements.
- Does it work the other way, from South Carolina to Pennsylvania?
- Not necessarily. Reciprocity is directed. Going from South Carolina to Pennsylvania, the mechanism is not applicable.
Sources
- S.C. Code of Laws Title 40, Chapter 11 - Contractors · S.C. Code Ann. Sections 40-11-30, 40-11-230, 40-11-260, 40-11-262, 40-11-290, 40-11-410 · South Carolina Legislature · Statute · verified September 17, 2026
- General and Mechanical Contractor Application for Licensure and Instructions (Doc. 165, 12/22/2025 v2.2) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Form · verified September 17, 2026
- General and Mechanical Contractors - Primary Qualifying Party (PQP) and Qualifying Party (QP) Initial Application (Doc. 168, 12/19/2025 v2.1) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Form · verified September 17, 2026
- SC Contractor’s Licensing Board - Licensure with the Board (application, qualifying parties, exams, group limits, financial statements, bonds) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agency Page · verified September 17, 2026
- SC Contractor’s Licensing Board - Technical Exam Waiver Agreements (as of May 2026, Revised 5/2026) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agreement Document · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.