Pennsylvania to Utah: general contractor license reciprocity
Pennsylvania does not issue a statewide general contractor license, so there is nothing to transfer. Here is Utah's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Applicants from jurisdictions DOPL has not determined equivalent, including the NASCLA examination route (all other states)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
An applicant whose home jurisdiction is not shown in green on DOPL’s Endorsement to Utah: Contractor map takes the ordinary route, which for B100 involves no trade examination at all. The qualifier completes an approved 25-hour pre-licensure course plus the five-hour Business and Law course, passes the Utah Contractor Business and Law examination through Prov, and shows two years, meaning 4,000 hours, of paid work experience in the construction industry. That experience travels freely: it counts wherever it was earned, whether the qualifier was paid as a W-2 employee or as an owner and whether the work was licensed or exempt, and it is self-certified on the application rather than verified by an employer, so out-of-state years are not lost. A qualifier who has passed the NASCLA Accredited Examination for Commercial General Building Contractors does not have to document the two years at all: Utah Admin. Code R156-55a-302b(2)(b)(i) accepts a passing NASCLA score in place of the experience requirement for every general classification, B100 included, and the application has a box for it. A Construction Management degree or an active Utah professional engineer license does the same. NASCLA does not remove the Business and Law examination or the pre-licensure courses. Where the origin jurisdiction issues no equivalent state-wide license, DOPL will still look at a city or county license, or a non-equivalent state license, as evidence towards Utah’s qualifications if the applicant files a verification showing the hours, examinations and other qualifications behind it.
Two things on DOPL’s published materials do not line up, and both are worth a phone call to the Division on (801) 530-6628 before paying any fee. First, the Apply for a General Contractor License page lists, as an alternative to the Business and Law examination, "One (1) year of licensed experience working in another State, District or Territory of the U.S. in the similar scope of practice sought in Utah if the license is currently active and in good standing", with no mention of an equivalency list, while Utah Admin. Code R156-55a-302a(3) waives that examination only "for an applicant for licensure by endorsement under Section 58-1-302" and the application checklist limits endorsement to "a jurisdiction determined equivalent to Utah" on a map last updated 21 September 2020. Second, the current rule and both apply pages set general liability cover at $1,000,000 each incident and $2,000,000 in total, while the March 2026 application form prints a $3,000,000 aggregate. On the map itself, the jurisdictions shaded yellow as "Limited to Specific Classifications" (Colorado, Connecticut, Delaware, Idaho, Illinois, Indiana, Iowa, Kentucky, Maine, Missouri, Montana, Nebraska, New Hampshire, New Jersey, Ohio, Oklahoma, Texas, Vermont, Washington, Wisconsin, Wyoming and the District of Columbia) are ones DOPL says do not license contractors generally but may license a specific specialty such as electrical, plumbing, HVAC or elevator work, which is not an equivalent to a B100 license; the jurisdictions shaded grey as having no equivalent license are Kansas, New York, North Dakota, Pennsylvania, South Dakota, Puerto Rico and the Northern Mariana Islands. Utah Code 58-1-302(2) is written state-neutrally and turns on scope of practice rather than on any named partner, and the map ends by inviting applicants to contact the Division if licensure laws have changed, so an applicant from a yellow or grey jurisdiction holding a license of genuinely similar scope can ask DOPL to look again.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must document at least 4,000 hours of qualifying work experience.Utah Admin. Code R156-55a-302b(1) reads the requirement broadly: experience counts whether the qualifier was paid as a W-2 employee or as an owner and whether the work was licensed or exempt, and it includes construction work done in the military or for a railroad corporation and work done under a construction trades instructor as part of an educational program. It need not be supervisory and need not match the classification sought. An applicant who is a building inspector may substitute two years as a building inspector including one year as a licensed combination inspector, and an E100 applicant needs four years instead.
- You must have passed a licensing exam in Pennsylvania that the destination considers comparable.Utah Admin. Code R156-55a-302b(2)(b)(i) states that a passing NASCLA score satisfies the experience requirement in Utah Code 58-55-302(1)(e)(ii)(A), and DOPL’s contracting FAQ repeats it in the same words. The rule is written for the general classifications as a group rather than for B100 alone, and both the apply page and the qualifier affidavit offer the NASCLA box to every general classification applicant, so it is available at this general level too. NASCLA is an examination credential, not a license and not an interstate agreement, so any applicant may use it whatever state they come from. It waives nothing else: the pre-licensure courses, the Utah Contractor Business and Law examination, insurance, financial responsibility, registration, background checks and fees all still apply.
- The qualifier must be either an owner of at least 20 per cent of the licensee or a W-2 employee in a management position, and must be paid for at least 12 hours of work a week for the licensee. A qualifier may not qualify more than three licensees at one time without the written approval of the Commission and the Division.
What you'll do to get licensed in Utah
- 1Other. Approved pre-licensure education completed by the qualifier before applying: a 25-hour pre-licensure course plus the five-hour Business and Law course, 30 hours in total for a general classification. DOPL accepts the course only from Associated Builders and Contractors (ABC), the Utah Home Builders Association (UHBA) or the Associated General Contractors of Utah (AGC); a qualifier who completed the 25-hour course before 1 October 2019 does not need the extra five hours. The Division does not publish the providers’ course prices, so ask the provider..
- 2Law / code exam. Pass a law, rules, or code exam. Utah Contractor Business and Law examination, taken by the qualifier through Prov either at one of 21 Utah test centers or remotely through Prov’s Examroom service. It is 60 questions in two hours, open reference, and the cut score is 70 per cent; the subject areas are business organization, licensing, estimating and bidding, contract management, project management, labor laws, lien laws, financial management, risk management, tax laws and safety. No DOPL pre-approval is needed to sit it, and a failed attempt may be retaken after 30 days for each of the first three failures and after six months for any failure after that. Pass before submitting the application..
- 3Exam fee. Pay the exam fee ($85). Prov examination fee for the Utah Contractor Business and Law exam, paid to Prov and charged again for each retake..
- 4Application fee. Pay the application fee ($175). Non-refundable DOPL application processing fee of $175 for each classification requested (application version v20260327). A contractor asking for more than one classification pays it more than once..
- 5Application fee. Pay the application fee ($50). Non-refundable DOPL application processing fee of $50 for each qualifier named on the application..
- 6Application fee. Pay the application fee ($1). Electronic Reference Library surcharge of $1, collected on every application to fund licensee access to national, state and local building codes and standards. An unincorporated applicant also pays $20 for each owner holding less than 8 per cent, filed with the Appendix F Owner-Worker Status Report..
- 7Insurance. Carry the required insurance ($1,000,000). General liability insurance certificate naming DOPL as certificate holder, covering the whole scope of work on the license and in force for the entire duration of active licensure. Utah Admin. Code R156-55a-302d and both DOPL apply pages set the minimum at $1,000,000 for each incident and $2,000,000 in total; the March 2026 application form prints $3,000,000 as the aggregate, so confirm the figure with the Division on (801) 530-6628 before binding cover. The cover must be kept up even while the contractor is not working, unless the license is placed on inactive status..
- 8Insurance. Carry the required insurance. Workers’ compensation insurance naming DOPL as certificate holder if the applicant has employees or owner-workers holding less than 8 per cent, together with a Utah State Tax Commission withholding account number and a Department of Workforce Services unemployment registration number, or a signed contract with an approved Professional Employer Organization. An applicant with no employees files a Workers’ Compensation Coverage Waiver from the Utah Labor Commission instead and must tell DOPL in writing before any employee starts work..
- 9Financial responsibility. Show financial responsibility. Satisfactory evidence of financial responsibility. Utah Code 58-55-306 lets this be shown by completing and signing the Division’s financial responsibility questionnaire, which asks about judgments, liens, tax liens and child support delinquencies in the past eight years and bankruptcy in the past seven, or by posting a bond. DOPL publishes no minimum net worth, working capital or credit score, and it may audit at random or on reasonable need, weighing judgments, restitution orders, collection actions, bankruptcy schedules, late payment history, financial statements, tax returns and a current credit report. For an unincorporated applicant the Division considers each owner’s personal finances..
- 10Surety bond. Post a surety bond ($50,000) (if applicable). License bond, required only where the Division is not satisfied that financial responsibility has been demonstrated. Under Utah Admin. Code R156-55a-602 the minimum is then the greater of 30 per cent of the cumulative outstanding debts, judgments, liens and obligations of the entity, its owners and qualifiers, or $50,000 for any general contractor classification other than R100. A bankruptcy filed, pending or discharged within three years instead sets it at 30 per cent of the total liabilities scheduled with the bankruptcy court. The surety must appear in Treasury Circular 570, the bond runs until DOPL gives written permission to drop it, and the Commission may set a higher or, on clear and convincing evidence, a lower amount..
- 11Business license. Obtain a business license. Registration with the Utah Division of Corporations and Commercial Code for any corporation, LLC, LLP or partnership, including an out-of-state entity, plus a federal Employer Identification Number; a sole proprietor may use a Social Security number and is licensed in their own given name. The license is issued in the registered legal name, business must be done in that name unless a DBA owned by the licensee is separately filed with DOPL, and if the corporate registration lapses the contractor license expires with it by statute..
- 12Background check. Complete a background check. Criminal background check under Utah Code 58-1-301.5 consented to and completed by the qualifier and by every individual holding at least a 10 per cent voting interest in the applicant, with disclosure of any criminal history the Division asks for. A yes answer on the qualifying questionnaire about discipline, pending criminal action, a misdemeanour in the past ten years or a felony at any time brings a requirement to file a personal account, police reports, court records and probation or parole reports for each incident..
- 13Continuing education. Complete continuing education. Six hours of approved continuing education in each two-year license term, of which at least three must be core education and at least three must be live in-class attendance, with no more than three hours online, and at least one hour in energy conservation. It is a condition of renewal rather than of getting the license. Licenses expire on 30 November of each odd-numbered year..
Published fees on this path total $311, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Other
- Law / code exam
- Exam fee · $85
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · $1,000,000
- Insurance
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $50,000 · if applicable
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education
How Utah licenses general contractors
Utah general contractor · “B100 General Building Contractor”
Statewide license
Issued by Utah Division of Professional Licensing (DOPL)
Utah licenses contractors statewide through the Division of Professional Licensing (DOPL) under the Utah Construction Trades Licensing Act, Utah Code 58-55, and Rule R156-55a, and it licenses by classification rather than by tier. The unlimited building classification is B100 General Building Contractor, which Utah Code 58-55-102(26)(a) defines as the construction of structures for the support, shelter and enclosure of persons, animals, chattels or movable property, and any component of that construction except plumbing, electrical, mechanical, elevator and manufactured housing work, for which a B100 must employ a contractor licensed in the specialty; a B100 building single-family or multifamily residences up to four units may do the mechanical work itself and employ a licensed plumber or electrician. A B100 license already carries every S-series specialty scope, so a general builder does not add S220 Carpentry and Flooring, S260 Asphalt and Concrete, S270 Drywall, Paint and Plastering, S280 Roofing, S310 Foundation, Excavation and Demolition, S330 Landscape and Recreation, S440 Sign Installation and the rest separately; it does not reach R200 Factory Built Housing, S700 Limited Scope, S510 Elevator or the E200, E201, P200, P201 and H100 trade classifications. Alongside B100 sit E100 General Engineering Contractor, for fixed works such as roads, bridges, dams and pipelines that need specialized engineering knowledge, and R100 Residential and Small Commercial Contractor, the homes-and-small-buildings classification. The license is issued to the business rather than to the person: the entity applies and names a qualifier, an owner of at least 20 per cent or a W-2 employee in a management position who is paid for at least 12 hours a week, and it is that qualifier who meets the course, experience and examination requirements and who may qualify no more than three licensees at once. There is no Utah trade examination for B100: the only DOPL examination is the Utah Contractor Business and Law exam. Licenses expire on 30 November of each odd-numbered year and renewal takes six hours of continuing education.
Why Pennsylvania has nothing to transfer
Pennsylvania general contractor · “General Contractor License / Contractor License (city-issued)”
Licensed by cities and counties
Issued by No state contractor authority; city building and licensing departments
Pennsylvania issues no general, commercial or building contractor license, and the Department of Labor and Industry says so on its own contractor licensing page: "The Commonwealth of Pennsylvania currently has no licensure or certification requirements for most construction contractors (or their employees)." The statewide registration that does exist, the Home Improvement Contractor registration with the Office of Attorney General, is no help on commercial work, because the Home Improvement Consumer Protection Act reaches only private residences of one or two units and expressly excludes the construction of a new home, services for commercial or business use performed away from a private residence, and the conversion of commercial buildings to residential use. What Pennsylvania licenses at state level is a short list of specific activities: crane operators through the State Board of Crane Operators, asbestos and lead removal through Labor and Industry, and manufactured housing installers through the Manufactured Housing Improvement Act. Commercial building is controlled by the city instead. Philadelphia requires a Contractor License of any business doing construction, demolition or repair that does not need a specialized trade license, Pittsburgh requires a General Contractor License for all work under a Commercial Building Development Application, and Scranton requires a General Contractor License for multi-family residential of three or more units, commercial, demolition and industrial work. Because there is no state contractor examination, there is nothing for the NASCLA Accredited Examination to stand in place of: no Pennsylvania authority publishes acceptance of it, and none of the three city programs mentions it. There is likewise no reciprocity anywhere in Pennsylvania at this level, so a commercial contractor moving here applies city by city and carries the insurance each city demands.
How local licensing works in Pennsylvania
How it works in Pennsylvania. No state board licenses, examines or qualifies building contractors, so there is no qualifying party, no state trade or business-law exam, no state bond, no financial-responsibility test and no state credential for another state's license to convert into. Cities that license do it under their own ordinances through a licenses and inspections department, and their credentials are valid only inside their own boundaries. Two of the three largest programs test nothing at all: they turn on insurance, tax compliance, identification and, in one case, a federal lead-safety certification. Only Scranton asks for a passing score, and even that has an experience-and-references alternative.
Philadelphia. A Contractor License from the Department of Licenses and Inspections "is required for any business doing work that: Involves construction, demolition, or repair [and] Does not require a specialized company license." Complete demolition, electrical, fire suppression and plumbing each need their own specialized license instead. The company must hold a Business Income and Receipts Tax ID and a Commercial Activity License, be current on all City taxes, and file a Certificate of Insurance showing general liability of $500,000 per occurrence, automobile liability of $300,000 and workers' compensation of $100,000 per accident, $100,000 per employee and a $500,000 policy limit. The one competency element is safety training: "You must identify the supervisors responsible for construction projects. A supervisor can only be employed by one company. They must also show proof of completion of an approved OSHA 30 safety training course taken within five years of application date." The license fee is $126 and the renewal fee is $126, with a non-refundable $20 application fee applied to the license fee and the balance due on approval; renewing more than 60 days late costs 1.5% of the license fee for every month since expiry. Renewal keeps the same conditions, except that a supervisor whose OSHA 30 certificate L&I has already accepted may take 30 hours of construction or demolition safety continuing education instead of retaking the course. Apply through eCLIPSE or at the Permit and License Center, 1401 John F. Kennedy Blvd.; applications are reviewed within five business days. The governing ordinance is Philadelphia Code Title 9-1004.
Pittsburgh. The Department of Permits, Licenses and Inspections issues just two contractor licenses, General Contractor and Sign Contractor, and they do not overlap. A General Contractor License is required for all work performed under a Commercial Building Development Application, for new one- or two-family dwellings, for renovations and additions to rental or investment residential properties, and for commercial and residential demolition permits. Bring a valid photo ID, a general liability certificate of at least $1,000,000 each occurrence and $2,000,000 general aggregate, a workers' compensation certificate, a Tax Compliance Letter from the City's Department of Finance, and an EPA Renovation, Repair and Painting certification in lead-safe construction practices, which lasts five years. The 2026 fee schedule prices the General Contractor license at $90.00 for the initial application and $90.00 for each annual renewal, with a $50.00 late fee. Licenses expire 365 days from the date of issuance, with a 60-day grace period and late fees from day 31, after which the license lapses and you start again. Applications are handled entirely through OneStopPGH; PLI is at 412 Boulevard of the Allies, 412-255-2175.
Scranton. Code Enforcement requires a General Contractor License for "any other work done on a multi-family residential (3+ units), commercial, demolition, industrial, et. al." The license is issued to a named individual rather than a company, runs the calendar year, and takes two possible routes. Option A is the minimum paperwork plus "Exam Results demonstrating a passing score on a UCC exam or ICC exam in the relevant subject" - for a builder, the ICC General Construction Contractor category - and costs $225.00. Option B replaces the exam with four years of practical experience documented by W-2s or 1099s (or two years plus four years of relevant post-secondary education, counting each year of education as half a year of experience) and three reference letters: one from a contractor who employed the applicant, one from an ICC- or UCC-certified inspector who has inspected the applicant's work, and one from a licensed design professional. Option B costs $250.00. Renewal is $175.00 with a $50.00 late fee, due before your first permit of the calendar year or by March 31, whichever comes first. Everyone files identification, an indemnification statement, a disclosure statement covering litigation and any license revocation or suspension "by the City or any other jurisdiction," general liability, property damage and public liability insurance of $500,000 per person and $1,000,000 per occurrence, workers' compensation or an affidavit of no employees, an unsworn affidavit under 18 Pa.C.S. § 4904, and a Single Tax Office registration number. Scranton enforces the 2018 ICC series.
Allegheny County. The county licenses no contractors. Its permits and licenses are road and bridge, dog, food facility, lead and asbestos abatement, marriage, passports, plumbing, swimming pool and facility rentals, so outside Pittsburgh city limits a commercial contractor deals with the municipality's own code office.
Everywhere else. Most Pennsylvania municipalities enforce the Uniform Construction Code through permits, plan review and third-party inspection agencies without licensing contractors at all, and the Act allows them to charge a reasonable fee for that. Check each municipality's code office before bidding.
Arriving from another state. Nothing transfers. There is no state application to file, no endorsement or reciprocity route to ask about, and no Pennsylvania authority that accepts the NASCLA Accredited Examination or any other out-of-state contractor examination in place of a requirement, because the Commonwealth sets no examination requirement at all. The practical work is registering the business in Pennsylvania, buying the liability and workers' compensation cover each city specifies, getting the supervisor's OSHA 30 card for Philadelphia and the EPA lead-safe certification for Pittsburgh, and applying separately in every city where you will pull permits. If you also do home improvement work on one- and two-unit homes, register with the Office of Attorney General as well; that requirement is described at the residential level.
Common questions
- Do I have to take the Utah general contractor exam if I'm licensed in Pennsylvania?
- The trade exam is waived, but Utah requires a law or code exam.
- What does it cost to get a Utah general contractor license from Pennsylvania?
- Published fees on this path total $311, not counting exam vendor fees or bonds.
- Do my Pennsylvania work hours count in Utah?
- Yes. Documented out-of-state experience counts toward Utah's eligibility requirements.
- Does it work the other way, from Utah to Pennsylvania?
- Not necessarily. Reciprocity is directed. Going from Utah to Pennsylvania, the mechanism is not applicable.
Sources
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- Utah Code 58-1-302 - License by endorsement · Utah Code 58-1-302(2) · Utah State Legislature · Statute · verified September 17, 2026
- Utah Code 58-55-102 - Definitions (Utah Construction Trades Licensing Act) · Utah Code 58-55-102(20), (26), (42) · Utah State Legislature · Statute · verified September 17, 2026
- Utah Code 58-55-302 - Qualifications for licensure · Utah Code 58-55-302(1)(c)(ii), (1)(e)(ii), (1)(e)(iii), (1)(e)(iv), (1)(e)(vii), (2)(b) · Utah State Legislature · Statute · verified September 17, 2026
- Utah Code 58-55-306 - Financial responsibility · Utah Code 58-55-306 · Utah State Legislature · Statute · verified September 17, 2026
- Utah Contractor Application - All Classifications (with qualifier affidavit, checklist and fee table) · Utah Code 58-55-306; Utah Admin. Code R156-1-301, R156-55a-602 · Utah Division of Professional Licensing (DOPL) · Form · verified September 17, 2026
- Endorsement to Utah: Contractor (state-by-state equivalency map) · Utah Code 58-55; 58-1-302 · Utah Division of Professional Licensing (DOPL) · Other · verified September 17, 2026
- Utah DOPL - Contracting licensing home page · Utah Division of Professional Licensing (DOPL) · Agency Page · verified September 17, 2026
- Utah DOPL - Contracting Continuing Education · Utah Division of Professional Licensing (DOPL) · Agency Page · verified September 17, 2026
- Utah DOPL - Contracting Exam Information · Utah Division of Professional Licensing (DOPL) · Agency Page · verified September 17, 2026
- Contracting Frequently Asked Questions (DOPL) · Utah Division of Professional Licensing (DOPL) · Faq · verified September 17, 2026
- Apply for a General Contractor License (DOPL) · Utah Division of Professional Licensing (DOPL) · Agency Page · verified September 17, 2026
- Apply for a Specialty Contractor License (DOPL) · Utah Division of Professional Licensing (DOPL) · Agency Page · verified September 17, 2026
- State of Utah Contracting Exam - Examination Handbook (Prov, for DOPL) · Prov, Inc., examination administrator for the Utah Division of Professional Licensing · Other · verified September 17, 2026
- Utah Admin. Code R156-55a - Utah Construction Trades Licensing Act Rule · Utah Admin. Code R156-55a-301c, -301h, -302a, -302b, -302d, -302f, -303a, -303b, -304, -306, -602 · Utah Office of Administrative Rules · Admin Rule · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.