Pennsylvania to Washington: general contractor license reciprocity
Pennsylvania does not issue a statewide general contractor license, so there is nothing to transfer. Here is Washington's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Everyone registers the same way; an out-of-state contractor license transfers nothing
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
A commercial or general contractor licensed in another state gains nothing from that license in Washington and loses nothing by not having one. L&I does not evaluate out-of-state credentials for contractor registration, publishes no reciprocity or endorsement route, and has nothing to waive, because Washington holds no contractor examination and sets no experience requirement. Washington is not one of the state agencies that accept the NASCLA Accredited Examination for Commercial General Building Contractors, for the same reason. An arriving contractor therefore follows the ordinary route: file a Business License Application with the Department of Revenue for a UBI (after filing with the Secretary of State if the business is a corporation, LLP or LLC, including one formed in another state), file a continuous $30,000 contractor surety bond or an assigned savings account for that amount with the State of Washington as obligee, file a certificate of general liability insurance naming L&I as certificate holder, submit the notarized Application for Construction Contractor Registration (F625-001-000) with a notarized affidavit from every principal, and pay $150.20 for a two-year registration. The business name must match exactly across the application, the bond and the insurance certificate. Applications mailed to Olympia take about three to four weeks to process; applications completed at a local L&I office are handled at the counter, and the registration card arrives about two weeks later.
An out-of-state business should also contact L&I's extraterritorial specialists at [email protected] or 360-902-4817 about reporting hours worked in Washington: L&I has workers' compensation reciprocal agreements with several neighboring states, but those agreements are about industrial insurance rather than licensing, and the construction industry is carved out of some of them. The statutory bond is a consumer-protection device, not a measure of capacity, so a large commercial contractor may still need far higher bonds by contract or under the public works statutes; the figures here are only what registration requires. Public agencies may not contract with an unregistered contractor (RCW 18.27.111).
At a glance
- Trade exam
- Waived
- Law / code exam
- Not required
- Out-of-state hours
- Do not count
- Typical processing
- About 28 days
What you must already have
- Every owner, member, partner and corporate officer must be at least 18 and provide a Social Security number or individual taxpayer identification number, a government-issued photo ID number and a residential address, and must sign the application before a notary public.RCW 18.27.030(1)(a) and (g), with the age and notarization requirements stated in the instructions to form F625-001-000.
- The application is denied if a principal has an unsatisfied final judgment for work subject to chapter 18.27 RCW or owes certain unpaid debts to L&I, or if the business is a successor operating with all or part of the assets of a previously registered entity under substantially common ownership, management or control that has such a judgment or debt.
- No examination result, trade experience, education, apprenticeship or financial statement is asked for at any point, so an out-of-state license, a NASCLA examination transcript and documented years in business are all equally irrelevant to the decision.
What you'll do to get licensed in Washington
- 1Application fee. Pay the application fee ($150.20). Contractor registration issuance fee (WAC 296-200A-900(1)). The registration is valid for two years from issuance and renews for the same $150.20; reinstatement after a suspension costs $70.90 and a duplicate certificate costs $16.50. L&I mails a renewal notice no more than 45 days before expiry, and it is the contractor's duty to notify the department in writing within ten days of any change of address..
- 2Surety bond. Post a surety bond ($30,000). Continuous Contractor's Surety Bond (F625-003-000) in the sum of $30,000 for a general contractor, issued by a surety insurer meeting chapter 48.28 RCW and naming the State of Washington as obligee. The original, uncorrected bond must be filed with L&I with the bonding company's seal, or filed electronically by the surety, and it must carry the exact business name on file. An assigned savings account for the same amount (form F625-008-000) held at a bank, savings and loan or credit union with a Washington branch may be posted instead. The bond answers claims by workers, the state for taxes and contributions, suppliers and customers; cancellation suspends the registration automatically, and a contractor that switches from a general to a specialty registration may not reduce the bond amount for two years..
- 3Insurance. Carry the required insurance ($250,000). General liability insurance of $200,000 public liability and $50,000 property damage, or a $250,000 combined single limit policy, written in the exact business name with L&I named as certificate holder. The statute states it as $50,000 for property damage, $100,000 for injury or death to any one person and $200,000 for injury or death to more than one person. Certificates reach L&I by mail, through the designated insurance agent portal or in person, never by email or fax, and an assigned account in the statutory amounts may be filed instead as proof of financial responsibility. Cancellation or expiry automatically suspends the registration..
- 4Business license. Obtain a business license. A Washington Business License Application filed with the Department of Revenue Business Licensing Service, producing the nine-digit Uniform Business Identifier (UBI) required on the registration application and required to stay active and valid throughout. A corporation, limited partnership, LLP or LLC formed in another state registers with the Washington Secretary of State first, and a copy of the Secretary of State certificate is filed with L&I. L&I will not process the registration until it verifies that the business license application has been filed and an excise tax account is open. The Department of Revenue's application fee varies with the endorsements the business needs and is not published as a single figure; see dor.wa.gov for the current processing fee..
- 5Other. Notarized Application for Construction Contractor Registration (F625-001-000), with an individually notarized affidavit of signature from each owner, member, partner and corporate officer. All signatures must be original, so a copy or an emailed application is not accepted; file it in person at a local L&I office or mail it to Contractor Registration, PO Box 44450, Olympia WA 98504-4450 with the bond, the insurance certificate and the fee..
- 6Other. Workers' compensation coverage and an employment security department number if the business will have employees in Washington; a business with no Washington employees may substitute its UBI account number. An applicant domiciled in a state or Canadian province covered by an extraterritorial workers' compensation agreement may file that jurisdiction's certificate of coverage instead of opening a Washington industrial insurance account (RCW 18.27.030(1)(c)(iii)). An employer identification number is needed from the IRS unless the applicant is a sole proprietor with no employees..
- 7Other. Model Disclosure Statement, Notice to Customer (F625-030-000), required on every residential job of $1,000 or more and on commercial projects of $1,000 to $60,000; failing to give it can cost the contractor its lien rights. The registration number must appear on all business communications, including advertising, bids, estimates and business cards, and a city, town or county may not issue a building permit without verifying that the contractor is registered..
- 8Other. Separate trade licensing where the work calls for it. Contractor registration does not authorize plumbing, electrical, elevator, boiler, asbestos or mobile home installation work; each carries its own education, examination and licensing requirements, and electrical contracting is licensed under chapter 19.28 RCW rather than as a registration specialty. A general contractor may meet these by subcontracting to, or employing, the appropriately licensed firm or certified tradesperson. (if applicable).
Published fees on this path total $150.20, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $30,000
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · $250,000
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How Washington licenses general contractors
Washington general contractor · “General Contractor Registration”
Statewide license
Issued by Washington State Department of Labor & Industries, Contractor Registration
Washington's unlimited tier is the General contractor registration issued by the Department of Labor & Industries, and it is the same credential described at the residential level: one registration covers both house and commercial work, because Washington draws no residential/commercial line. A general contractor is defined by trade breadth rather than by market or contract value: it is a contractor 'whose business operations require the use of more than one building trade or craft upon a single job or project or under a single building permit', including anyone who superintends or consults on such work, while a specialty contractor is limited to one of 63 named trades and may subcontract only work incidental to that trade. There is no dollar cap, no classification letter and no project-size tier on a general registration. Washington does not examine contractors at all: chapter 18.27 RCW and chapter 296-200A WAC contain no trade exam, no business-and-law exam, no experience requirement, no net worth or financial statement test and no qualifying party, and L&I's application asks for none of them. What the state requires is a registered business with money behind it, which the department verifies rather than judges: a Uniform Business Identifier from the Department of Revenue, a continuous $30,000 surety bond (or an assigned savings account for the same amount), general liability insurance of $200,000 public liability and $50,000 property damage or $250,000 combined single limit, a notarized application signed by every owner, member, partner and officer, and $150.20 for two years. Registration is required of every contractor with almost no threshold: the only general exemption is work on a single project whose total price for labor, materials and everything else is under $500, and even that is lost if the person advertises as a contractor. Registration is statewide and exclusive; RCW 18.27.130 bars any city or county from issuing its own contractor registration, license or bond, though a city may still charge a general business license fee and a gross receipts tax, and a building department must verify a contractor's registration before it issues a permit.
Why Pennsylvania has nothing to transfer
Pennsylvania general contractor · “General Contractor License / Contractor License (city-issued)”
Licensed by cities and counties
Issued by No state contractor authority; city building and licensing departments
Pennsylvania issues no general, commercial or building contractor license, and the Department of Labor and Industry says so on its own contractor licensing page: "The Commonwealth of Pennsylvania currently has no licensure or certification requirements for most construction contractors (or their employees)." The statewide registration that does exist, the Home Improvement Contractor registration with the Office of Attorney General, is no help on commercial work, because the Home Improvement Consumer Protection Act reaches only private residences of one or two units and expressly excludes the construction of a new home, services for commercial or business use performed away from a private residence, and the conversion of commercial buildings to residential use. What Pennsylvania licenses at state level is a short list of specific activities: crane operators through the State Board of Crane Operators, asbestos and lead removal through Labor and Industry, and manufactured housing installers through the Manufactured Housing Improvement Act. Commercial building is controlled by the city instead. Philadelphia requires a Contractor License of any business doing construction, demolition or repair that does not need a specialized trade license, Pittsburgh requires a General Contractor License for all work under a Commercial Building Development Application, and Scranton requires a General Contractor License for multi-family residential of three or more units, commercial, demolition and industrial work. Because there is no state contractor examination, there is nothing for the NASCLA Accredited Examination to stand in place of: no Pennsylvania authority publishes acceptance of it, and none of the three city programs mentions it. There is likewise no reciprocity anywhere in Pennsylvania at this level, so a commercial contractor moving here applies city by city and carries the insurance each city demands.
How local licensing works in Pennsylvania
How it works in Pennsylvania. No state board licenses, examines or qualifies building contractors, so there is no qualifying party, no state trade or business-law exam, no state bond, no financial-responsibility test and no state credential for another state's license to convert into. Cities that license do it under their own ordinances through a licenses and inspections department, and their credentials are valid only inside their own boundaries. Two of the three largest programs test nothing at all: they turn on insurance, tax compliance, identification and, in one case, a federal lead-safety certification. Only Scranton asks for a passing score, and even that has an experience-and-references alternative.
Philadelphia. A Contractor License from the Department of Licenses and Inspections "is required for any business doing work that: Involves construction, demolition, or repair [and] Does not require a specialized company license." Complete demolition, electrical, fire suppression and plumbing each need their own specialized license instead. The company must hold a Business Income and Receipts Tax ID and a Commercial Activity License, be current on all City taxes, and file a Certificate of Insurance showing general liability of $500,000 per occurrence, automobile liability of $300,000 and workers' compensation of $100,000 per accident, $100,000 per employee and a $500,000 policy limit. The one competency element is safety training: "You must identify the supervisors responsible for construction projects. A supervisor can only be employed by one company. They must also show proof of completion of an approved OSHA 30 safety training course taken within five years of application date." The license fee is $126 and the renewal fee is $126, with a non-refundable $20 application fee applied to the license fee and the balance due on approval; renewing more than 60 days late costs 1.5% of the license fee for every month since expiry. Renewal keeps the same conditions, except that a supervisor whose OSHA 30 certificate L&I has already accepted may take 30 hours of construction or demolition safety continuing education instead of retaking the course. Apply through eCLIPSE or at the Permit and License Center, 1401 John F. Kennedy Blvd.; applications are reviewed within five business days. The governing ordinance is Philadelphia Code Title 9-1004.
Pittsburgh. The Department of Permits, Licenses and Inspections issues just two contractor licenses, General Contractor and Sign Contractor, and they do not overlap. A General Contractor License is required for all work performed under a Commercial Building Development Application, for new one- or two-family dwellings, for renovations and additions to rental or investment residential properties, and for commercial and residential demolition permits. Bring a valid photo ID, a general liability certificate of at least $1,000,000 each occurrence and $2,000,000 general aggregate, a workers' compensation certificate, a Tax Compliance Letter from the City's Department of Finance, and an EPA Renovation, Repair and Painting certification in lead-safe construction practices, which lasts five years. The 2026 fee schedule prices the General Contractor license at $90.00 for the initial application and $90.00 for each annual renewal, with a $50.00 late fee. Licenses expire 365 days from the date of issuance, with a 60-day grace period and late fees from day 31, after which the license lapses and you start again. Applications are handled entirely through OneStopPGH; PLI is at 412 Boulevard of the Allies, 412-255-2175.
Scranton. Code Enforcement requires a General Contractor License for "any other work done on a multi-family residential (3+ units), commercial, demolition, industrial, et. al." The license is issued to a named individual rather than a company, runs the calendar year, and takes two possible routes. Option A is the minimum paperwork plus "Exam Results demonstrating a passing score on a UCC exam or ICC exam in the relevant subject" - for a builder, the ICC General Construction Contractor category - and costs $225.00. Option B replaces the exam with four years of practical experience documented by W-2s or 1099s (or two years plus four years of relevant post-secondary education, counting each year of education as half a year of experience) and three reference letters: one from a contractor who employed the applicant, one from an ICC- or UCC-certified inspector who has inspected the applicant's work, and one from a licensed design professional. Option B costs $250.00. Renewal is $175.00 with a $50.00 late fee, due before your first permit of the calendar year or by March 31, whichever comes first. Everyone files identification, an indemnification statement, a disclosure statement covering litigation and any license revocation or suspension "by the City or any other jurisdiction," general liability, property damage and public liability insurance of $500,000 per person and $1,000,000 per occurrence, workers' compensation or an affidavit of no employees, an unsworn affidavit under 18 Pa.C.S. § 4904, and a Single Tax Office registration number. Scranton enforces the 2018 ICC series.
Allegheny County. The county licenses no contractors. Its permits and licenses are road and bridge, dog, food facility, lead and asbestos abatement, marriage, passports, plumbing, swimming pool and facility rentals, so outside Pittsburgh city limits a commercial contractor deals with the municipality's own code office.
Everywhere else. Most Pennsylvania municipalities enforce the Uniform Construction Code through permits, plan review and third-party inspection agencies without licensing contractors at all, and the Act allows them to charge a reasonable fee for that. Check each municipality's code office before bidding.
Arriving from another state. Nothing transfers. There is no state application to file, no endorsement or reciprocity route to ask about, and no Pennsylvania authority that accepts the NASCLA Accredited Examination or any other out-of-state contractor examination in place of a requirement, because the Commonwealth sets no examination requirement at all. The practical work is registering the business in Pennsylvania, buying the liability and workers' compensation cover each city specifies, getting the supervisor's OSHA 30 card for Philadelphia and the EPA lead-safe certification for Pittsburgh, and applying separately in every city where you will pull permits. If you also do home improvement work on one- and two-unit homes, register with the Office of Attorney General as well; that requirement is described at the residential level.
Common questions
- Do I have to take the Washington general contractor exam if I'm licensed in Pennsylvania?
- No. The trade exam is waived on this path.
- What does it cost to get a Washington general contractor license from Pennsylvania?
- Published fees on this path total $150.20, not counting exam vendor fees or bonds.
- Do my Pennsylvania work hours count in Washington?
- No. Washington does not credit out-of-state hours on this path.
- How long does the application take?
- The board's published or typical processing time is about 28 days.
- Does it work the other way, from Washington to Pennsylvania?
- Not necessarily. Reciprocity is directed. Going from Washington to Pennsylvania, the mechanism is not applicable.
Sources
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- NASCLA Commercial Exam - Participating State Agencies · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- Washington Department of Revenue - Apply for a business license (UBI number) · Washington State Department of Revenue, Business Licensing Service · Agency Page · verified September 17, 2026
- L&I Form F625-001-000 - Application for Construction Contractor Registration (rev. 07-2026) · Washington State Department of Labor & Industries · Form · verified September 17, 2026
- L&I - Register as a Contractor · Washington State Department of Labor & Industries · Agency Page · verified September 17, 2026
- RCW 18.27.010 - Definitions (contractor, general contractor, specialty contractor) · RCW 18.27.010 · Washington State Legislature · Statute · verified September 17, 2026
- RCW 18.27.030 - Application for registration - Grounds for denial and suspension · RCW 18.27.030 · Washington State Legislature · Statute · verified September 17, 2026
- RCW 18.27.040 - Bond or other security required · RCW 18.27.040 · Washington State Legislature · Statute · verified September 17, 2026
- RCW 18.27.050 - Insurance or financial responsibility required · RCW 18.27.050 · Washington State Legislature · Statute · verified September 17, 2026
- RCW 18.27.060 - Certificate of registration - Issuance, duration, renewal - Suspension · RCW 18.27.060 · Washington State Legislature · Statute · verified September 17, 2026
- Chapter 18.27 RCW - Registration of Contractors (full chapter text) · Chapter 18.27 RCW · Washington State Legislature · Statute · verified September 17, 2026
- WAC 296-200A-016 - Definitions of the specialty contractor classifications for the purpose of contractor registration only · WAC 296-200A-016; WAC 296-200A-015 · Washington State Legislature · Admin Rule · verified September 17, 2026
- WAC 296-200A-025 - How does a contractor register, renew, reregister or reinstate its registration? · WAC 296-200A-025 · Washington State Legislature · Admin Rule · verified September 17, 2026
- WAC 296-200A-030 - How much are the surety bond or savings account amounts? · WAC 296-200A-030 · Washington State Legislature · Admin Rule · verified September 17, 2026
- WAC 296-200A-900 - What fees does the department charge contractors for issuance, renewal, reregistration, and reinstatement of certificates of registration? · WAC 296-200A-900 · Washington State Legislature · Admin Rule · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.