LicensebyState

South Dakota to Alabama: general contractor license reciprocity

No credit· Start overVerified September 17, 2026· 8 sources

South Dakota does not issue a statewide general contractor license, so there is nothing to transfer. Here is Alabama's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Prime contractor license, including the NASCLA Accredited Examination route (states without a reciprocity agreement)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Alabama uses the NASCLA Accredited Examination for Commercial General Building Contractors as its own trade examination for the Building Construction (Commercial) classification: the Board's official PSI candidate bulletin states that for that examination PSI administers the NASCLA Accredited Examination, and prints the NASCLA content outline (115 questions, 330 minutes, 81 to pass, open book) as the Alabama commercial building trade exam. A contractor who already holds the NASCLA credential can release the transcript from NASCLA's National Examination Database instead of sitting the trade exam again; a contractor without it sits it through PSI like anyone else, and other classifications each have their own Alabama PSI trade exam. Nothing else is waived. Every applicant must pass the Alabama Business and Law examination, file the $300 prime application with a Qualifying Party Form, show a minimum net worth and working capital of $10,000 in an accountant-prepared financial statement, file proof of general liability insurance, register the entity with the Alabama Secretary of State, supply three commercial or industrial work references for each classification requested plus an organizational chart, and prove citizenship or lawful presence. The application must be complete and on file 30 days before one of the Board's quarterly meetings, and no one may book an examination until it is.

The trade examination is shown as waivable because Alabama's own commercial building trade exam is the NASCLA Accredited Examination; an applicant who has not passed it, or who wants a classification other than Building Construction (Commercial), still sits the relevant PSI trade examination, which is why it stays on the requirements list. Out-of-state experience is not converted into hours or years, because the Board sets no hour requirement; it counts through the work-experience section and the three reference forms, which the Board reviews to decide which classifications to grant. The Board does not publish a processing time or a bid-limit dollar table; ask the Board at (334) 272-5030. Licenses renew annually in a month set by the first letter of the company name, at $200 for a prime license and $100 for a subcontractor license, and a license left unrenewed for a year past its expiration date means a new application and retaking both the trade and business and law examinations. Amending a license to add a classification also requires that classification's trade examination.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • You must have passed a licensing exam in South Dakota that the destination considers comparable.The NASCLA Accredited Examination for Commercial General Building Contractors is the examination Alabama itself uses for the Building Construction (Commercial) classification: the Board's PSI candidate bulletin says that for the Building Construction Examination (Commercial), PSI administers the NASCLA Accredited Examination, and prints its content outline as the Alabama exam. Candidates who have already passed it can send their transcript from NASCLA's National Examination Database at https://ned.nascla.org rather than repeating the exam. It is an examination credential and not a license: it waives no fee, no financial statement, no insurance, no reference and never the Alabama Business and Law examination. Because the Board does not publish a NASCLA policy statement of its own, confirm with the Board at (334) 272-5030 that a transcript will be accepted for the classification you want before relying on it.
  • Documented commercial or industrial work experience in each classification requested, evidenced by three completed projects and three reference forms. The Board sets no minimum number of years or hours.

What you'll do to get licensed in Alabama

  1. 1Law / code exam. Pass a law, rules, or code exam. Alabama Business and Law examination (formerly the General Contractor examination) through PSI: 50 questions, 120 minutes, 70% to pass, open book against the NASCLA Contractors Guide to Business Law and Project Management, Alabama General edition. It is required of all general contractors and the Board says it is never waived, including on reciprocity..
  2. 2Trade exam. Pass the destination's trade exam. One PSI trade examination for each classification requested. For Building Construction (Commercial), PSI administers the NASCLA Accredited Examination for Commercial General Building Contractors as the Alabama trade exam: 115 questions, 330 minutes, 81 to pass, open book. An applicant who has already passed the NASCLA Accredited Examination elsewhere can release the transcript from NASCLA's National Examination Database rather than sitting it again. Other classifications have their own Alabama PSI trade examinations, and a complete application must be on file before anyone may register to test..
  3. 3Exam fee. Pay the exam fee ($96). $96 for each PSI examination, rising to $106 for AL Building Construction (Commercial), AL Highways and Streets Contractor, AL Municipal and Utility Contractor and AL Heavy Railroad Construction. Paid to PSI when the examination is booked, after the Board determines eligibility..
  4. 4Application fee. Pay the application fee ($300). Prime contractor application fee of $300, paid by cashier's check or money order only; personal and company checks are returned and Alabama law does not allow refunds. A subcontractor application is $150. The fee gives the applicant one year from the date the Board receives it to complete the requirements..
  5. 5Financial responsibility. Show financial responsibility of at least $10,000. Minimum net worth and working capital of $10,000, shown in an audited, reviewed or compiled financial statement prepared under generally accepted accounting principles by a CPA or a licensed public accountant approved by the Board, dated no more than one year before submission. The Alabama Department of Transportation booklet is also accepted. Cash-basis and tax-basis statements are not accepted and deficits are not accepted. The figures submitted set the license's bid limit; a bank line of credit can raise working capital to the level of net worth, and a personal or parent-company statement plus the Board's Guaranty Agreement can raise the bid limit one step. The Board does not publish the dollar table that converts financial figures into bid limits..
  6. 6Insurance. Carry the required insurance. Proof of current general liability insurance filed with the application, in the exact name of the applicant, showing the Alabama Licensing Board for General Contractors at 445 Dexter Ave, Suite 3060, Montgomery, AL 36104 as certificate holder..
  7. 7Business license. Obtain a business license. The license is issued to a legal entity, so every entity, Alabama or out-of-state, must be registered with the Alabama Secretary of State before the license issues, and a dated print screen of the Entity Details record goes in the application. Individuals and general partnerships are exempt from this step. The state and county privilege license is a separate obligation from the Board's license..
  8. 8Other. Qualifying Party Form for each named qualifier, three work or job reference forms from three separate licensed general contractors, registered architects, registered professional engineers or Board-qualified persons covering commercial or industrial projects in each classification requested, a Principal Individual Questionnaire for anyone whose experience is being counted, an organizational chart for the applicant entity, a notarized affidavit, and proof of United States citizenship or lawful presence..

Published fees on this path total $396, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam
  • Trade exam
  • Exam fee · $96

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How Alabama licenses general contractors

Alabama general contractor · “General Contractor (Prime) license, by major classification such as Building Construction (BC)

Statewide license

Verified September 17, 2026· 5 sources

Issued by Alabama Licensing Board for General Contractors

Alabama licenses commercial and public general contracting statewide through the Alabama Licensing Board for General Contractors in Montgomery; residential homebuilding is licensed separately by the Home Builders Licensure Board. A license is required for any undertaking, including labor and materials, costing $100,000 or more, and for swimming pool construction of $5,000 or more; subcontractors working under a licensed prime at or above those figures must also be licensed, and an awarding authority must confirm licensure before accepting a bid. The license belongs to the business rather than the person: it is issued to an individual, partnership, corporation, LLC or LLP and is qualified by a named qualifying party on the Board's Qualifying Party Form, so an inbound contractor applies as or for the entity that will sign contracts. Licenses are granted by classification, with major classifications including Building Construction, Building Construction Under Four Stories, Highways and Streets, Municipal and Utility, Heavy and Railroad, Mechanical and Electrical, each with named subclassifications, and at least three completed projects must be documented for every classification requested. Every license also carries a bid limit set by the financial statement the applicant files rather than by skill. The Board names five states whose licensees may have the trade examination waived; the business law examination is never waived.

Moving to AlabamaLeaving Alabama

Why South Dakota has nothing to transfer

South Dakota general contractor

Licensed by cities and counties

Verified September 17, 2026· 10 sources

South Dakota has no state general, commercial or building contractor license and no state board that examines or qualifies builders, so there is nothing at state level for an out-of-state general contractor's license to transfer into. The Department of Labor and Regulation's occupational licensing list has an Electrical Commission, a Plumbing Commission and a Board of Technical Professions for architects and engineers, and no contractor board, so the credentials that matter at state level are the electrical and plumbing licenses held by the subcontractors and the design professionals who stamp the drawings. Commercial building is governed locally, and most of the state's larger cities license less at this level than at the residential one: Sioux Falls states that it 'does not require Commercial Building Contractors to be licensed at this time', Aberdeen says commercial contractors are not required to be licensed through the city because commercial projects are designed and overseen by architects and engineers, and Brookings publishes a residential contractor license and no commercial equivalent. Rapid City is the exception, licensing a Class A general contractor for construction of all types of structures on the ICC National Standard General Building Contractor (A) examination. Every contractor, commercial included, must hold a free contractor's excise tax license from the Department of Revenue before starting work anywhere in the state, and the 2% contractor's excise tax falls on the prime contractor's gross receipts.

How local licensing works in South Dakota

How it works in South Dakota. No South Dakota agency issues a general, commercial, building or unlimited contractor license, and there is no state qualifying party, business-and-law examination or financial responsibility test. Commercial construction is controlled through the building permit and the plan review, and by the state's requirement that commercial projects be designed and overseen by licensed architects and engineers. The one thing the state does require of every commercial contractor is a contractor's excise tax license from the Department of Revenue: 'an individual must be licensed before starting work in South Dakota. All contractors must be licensed regardless of the amount of the receipts they have or the amount of tax due.' It is free, it is applied for online, and the 2% contractor's excise tax is imposed on the gross receipts of the prime contractor. Get it first; cities ask for the card.

Rapid City. This is the one city of the four that licenses commercial builders, and its Class A license is the most demanding contractor credential in South Dakota. Class A is the 'General Contractor' class, 'for construction of any and All types of structures', and it is issued on the ICC National Standard General Building Contractor (A) examination, known as the G11, taken through Pearson VUE: 4.5 hours, 90 multiple-choice questions, open book, based on the 2018 International Building Code and the 2018 International Residential Code, with an examination fee of $115.00 and testing at the Career Learning Center, 730 E Watertown St. The license itself is $200 initially and $100 to renew, runs three years and carries six hours of continuing education per period. Every applicant files a certificate of insurance naming the City of Rapid City as certificate holder, and no other form is accepted, with minimum general aggregate liability of $1,000,000, $300,000 fire damage and $1,000,000 each occurrence, plus a workers' compensation certificate or a signed statement of non-participation. A copy of the South Dakota excise tax certificate is part of the packet, and an electrical contractor class separately requires proof of a South Dakota electrical contractor's license. No verifiable experience is required for Class A, and the packet offers no waiver, credit or reciprocity for a contractor license held in another city or another state: a licensee who lets the license lapse beyond the one-year grace period must reapply and pass the examination again. Building Services is on (605) 394-4120.

Sioux Falls. The city's position is one sentence long: 'The City of Sioux Falls does not require Commercial Building Contractors to be licensed at this time.' What it requires instead is that each individual project goes through plan review and obtains the proper permits. Note that apartment buildings count as commercial for construction purposes even though they are residential in use, so a multifamily builder falls outside the residential license as well. The electrical, mechanical, plumbing, refrigeration, sign and right-of-way trades are separately licensed by the city, and right-of-way contractors must be bonded and insured before working in a city right-of-way. Plans examiners are on 605-367-8248 and building inspectors on 605-367-8251.

Aberdeen. 'Because the majority of commercial construction projects are required to be designed and overseen by design professionals (i.e. Professional Architects and Professional Engineers), Commercial Contractors are not required to be licensed through the City of Aberdeen. Commercial Contractors are required to obtain a South Dakota Excise Tax License.' Electricians are licensed by the state, with state permits and state inspections in Aberdeen; plumbers are licensed by the state but permitted and inspected by city inspectors. Building Inspection is at City Hall, 123 South Lincoln Street, 3rd Floor, 605-626-7017.

Brookings. Community Development issues a residential contractor license, a plumber license, building permits and rental licenses, and publishes no commercial or general building contractor license; all work must conform to the International Building Code and electrical and plumbing work must be done by trades licensed by the state and the city. Because the city publishes no commercial contractor application, confirm what is expected of a commercial builder with Community Development on (605) 692-6629 before bidding. Building permits also apply on nonagricultural land in the joint jurisdictional area about three miles beyond the city.

Everywhere else. Other South Dakota cities set their own permit and licensing rules, and the further from the larger cities you go the more likely it is that a permit and proof of insurance are all that is asked. Check with each building official, and hold the state excise tax license wherever you work.

Moving to South DakotaLeaving South Dakota

Common questions

Do I have to take the Alabama general contractor exam if I'm licensed in South Dakota?
The trade exam is waived, but Alabama requires a law or code exam.
What does it cost to get a Alabama general contractor license from South Dakota?
Published fees on this path total $396, not counting exam vendor fees or bonds.
Do my South Dakota work hours count in Alabama?
Yes. Documented out-of-state experience counts toward Alabama's eligibility requirements.
Does it work the other way, from Alabama to South Dakota?
Not necessarily. Reciprocity is directed. Going from Alabama to South Dakota, the mechanism is not applicable.

Sources

  1. Alabama Licensing Board for General Contractors - How to Apply for a License (fees, reciprocity, references) · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  2. Alabama Licensing Board for General Contractors - Contractor Licensing Law (definition and thresholds) · Ala. Code §§ 34-8-1, 34-8-2, 34-8-7, 34-8-8, 34-8-9 · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  3. Prime Contractor Application and Instructions - Alabama Licensing Board for General Contractors (rev. 02/2022) · Ala. Admin. Code r. 230-X-1-.33; Ala. Code § 34-8-2(b) · Alabama Licensing Board for General Contractors · Form · verified September 17, 2026
  4. State of Alabama General Contractors - Candidate Information Bulletin (PSI, updated 1/23/26) · PSI Services LLC for the Alabama Licensing Board for General Contractors · Other · verified September 17, 2026
  5. Alabama Licensing Board for General Contractors - Reciprocity (reciprocal states and exam waiver) · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  6. Alabama Licensing Board for General Contractors - Renewal Information (staggered renewal months and fees) · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  7. Alabama Licensing Board for General Contractors - Testing (PSI bulletin and trade exam requirement) · Ala. Admin. Code r. 230-X-1-.27, 230-X-1-.34 · Alabama Licensing Board for General Contractors · Agency Page · verified September 17, 2026
  8. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related