Tennessee to South Carolina: general contractor license reciprocity
South Carolina has a reciprocity agreement with Tennessee: a Tennessee general contractor can get a South Carolina license without retaking the trade exam.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Technical exam waiver for Tennessee licensees (Limited Building and Unlimited Building)
A signed state-to-state agreement. The trade exam is waived; you apply, prove your history, and pay the fee.
South Carolina’s Technical Exam Waiver Agreements list accepts Tennessee’s BC-b, BC-C and BC-A/b examinations in place of the South Carolina Limited Building examination, and Tennessee’s BC, BC-B, BC-BC and BC-A/B examinations in place of the Unlimited Building examination. Which one you are credited with matters: a qualifying party who holds only the limited building credit can qualify a Group 1, 2 or 3 license and the structures built under it are restricted to three stories in height, while Groups 4 and 5 need the unlimited credit. The waiver covers the technical examination only. The qualifying party still passes the South Carolina Business Management & Law for Commercial Contractors examination through PSI, and the business still files the General and Mechanical Contractor application (Doc. 165) with the $350 licensure fee, proof it may conduct business in South Carolina, and a financial statement or surety bond supporting the license group it wants. Have the origin board complete the SC Examination Waiver form and mail it in with the qualifying party application; copies of a license or of exam results are not accepted, and a license obtained by waiver or grandfathering does not qualify.
The Board’s licensure page says the two years of work experience it otherwise requires is not asked of waiver and reciprocity applicants, while S.C. Code Section 40-11-230(B)(2) requires two years of full-time experience within the previous five years to be designated a primary qualifying party. Ask the Board which applies to you before filing. The Technical Exam Waiver Agreements list is revised periodically, so confirm your exact classification is still on it before paying any fee.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
- Agreement
- Active
What you must already have
- Your Tennessee license must be active and in good standing.
- Your Tennessee license must have been obtained by examination, not by reciprocity or grandfathering.The Tennessee row of the Board’s Technical Exam Waiver Agreements chart, revised May 2026, also lists CMC, CMC-A, CMC-C and CE examinations, which map to the separate Mechanical Contractor license.
What you'll do to get licensed in South Carolina
- 1Law / code exam. Pass a law, rules, or code exam. South Carolina Business Management & Law for Commercial Contractors examination, administered by PSI. Every individual must pass it before the Board will certify them as a qualifying party, no matter which route they use to satisfy the technical examination. Register at https://test-takers.psiexams.com/sccon. S.C. Code Section 40-11-230 requires a grade of 70 percent or better, and an individual may sit a given examination only twice in a twelve-month period and once every six months after that..
- 2Other. SC Examination Waiver form, completed and returned by the Tennessee licensing board and mailed in with the Doc. 168 application. Copies of your license or of your examination results are not accepted in its place..
- 3Exam fee. Pay the exam fee. PSI examination fees are paid directly to PSI when the examination is scheduled. The Board does not publish the amounts; the current fees are in PSI’s South Carolina candidate information bulletin at https://test-takers.psiexams.com/sccon, or call PSI at (855) 746-8173..
- 4License fee. Pay the license or certificate fee ($350). Non-refundable $350 licensure fee, paid by check or money order to SCCLB with the General and Mechanical Contractor Application for Licensure (Doc. 165). No cash is accepted and a returned-check fee of up to $30 may be charged. General Contractor licenses expire on October 31 in even-numbered years..
- 5Financial responsibility. Show financial responsibility of at least $10,000. Financial statement for the entity that will hold the license, sized by the license group it wants, with a balance sheet dated no more than twelve months before the application. For General Contractors the groups are: Group 1, bids and jobs up to $100,000, working capital $10,000 or net worth $20,000; Group 2, up to $400,000, $40,000 or $60,000; Group 3, up to $1,000,000, $100,000 or $150,000; Group 4, up to $3,000,000, $175,000 or $250,000; Group 5, unlimited, $250,000 or $350,000. Only one of working capital or net worth has to be met. Groups 1 and 2 may file the owner-prepared statement with an affidavit of accuracy (Doc. 172); Groups 3 and 4 need a statement compiled by a licensed CPA in accordance with GAAP; Group 5 needs an audited balance sheet from a licensed CPA. The figure shown is the Group 1 working capital minimum (S.C. Code Section 40-11-260)..
- 6Surety bond. Post a surety bond ($20,000) (if applicable). Optional alternative to the financial statement under S.C. Code Section 40-11-262: a surety bond in the same amount as the net worth required for the license group, so $20,000 for Group 1, $60,000 for Group 2, $150,000 for Group 3, $250,000 for Group 4 and $350,000 for Group 5. The surety must be authorized to transact surety business in South Carolina, the bond is continuous, lists the State of South Carolina as obligee, and stays in force until the licensee files a financial statement meeting its group. The original must carry the surety’s signature, the principal’s signature, a visible surety company seal and the attached power of attorney; DocuSign is not accepted, and a bond payable to the Residential Builders Commission is not accepted by this Board. The figure shown is the Group 1 bond..
- 7Business license. Obtain a business license. The license is issued to the business, so the entity must be able to conduct business in South Carolina. Attach a Certificate of Existence (or Good Standing) from the SC Secretary of State if the company was incorporated in South Carolina, or a Certificate of Authority if it was incorporated in another state, together with the articles of incorporation or organization and documentation of each owner’s percentage. This is not required for a sole proprietorship..
- 8Other. Primary Qualifying Party / Qualifying Party Initial Application (Doc. 168) for each qualifying party who is not already certified or has been inactive more than four years, with a copy of a driver’s license, state-issued ID, passport or military ID, a copy of the Social Security card, a notarized Verification of Lawful Presence form, the PQP/QP Company Acknowledgement Affidavit (Doc. 190), examination score sheets, and official license verifications from every other state where you are or have been licensed..
Published fees on this path total $350, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Exam fee
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $20,000 · if applicable
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How South Carolina licenses general contractors
South Carolina general contractor · “General Contractor license, Building classification (Limited Building or Unlimited Building), Group 1-5”
Statewide license
Issued by South Carolina Contractor’s Licensing Board (SC LLR)
Commercial and unlimited building work in South Carolina runs through the Contractor’s Licensing Board, which licenses General Contractors for any general contracting where the total cost of construction is more than $10,000. The license belongs to the business, not to the person: an individual, corporation, LLC or partnership holds it and must designate a Primary Qualifying Party for each classification, an individual in a management role who personally passes the examinations, so an inbound contractor applies as or for the entity that will sign contracts and pull permits. The Building classification covers commercial, industrial, institutional, modular and all other building construction including residential structures, and carries the Wood Frame Structures, Nonstructural Renovation, Masonry, Pre-engineered Metal Buildings, Roofing, Structural Framing and Miscellaneous Metals subclassifications. Every license also carries a group limit driven by money rather than skill: Group 1 bids and jobs up to $100,000 through to Group 5 with no cap, each set by working capital, net worth or a surety bond. The qualifying party for a Group 1, 2 or 3 license passes either the limited building contractor examination or the unlimited general contractor examination, while Groups 4 and 5 require the unlimited examination, and structures built under a limited building examination are restricted to three stories.
Common questions
- Do I have to take the South Carolina general contractor exam if I'm licensed in Tennessee?
- The trade exam is waived, but South Carolina requires a law or code exam.
- What does it cost to get a South Carolina general contractor license from Tennessee?
- Published fees on this path total $350, not counting exam vendor fees or bonds.
- Do my Tennessee work hours count in South Carolina?
- Yes. Documented out-of-state experience counts toward South Carolina's eligibility requirements.
Sources
- S.C. Code of Laws Title 40, Chapter 11 - Contractors · S.C. Code Ann. Sections 40-11-30, 40-11-230, 40-11-260, 40-11-262, 40-11-290, 40-11-410 · South Carolina Legislature · Statute · verified September 17, 2026
- General and Mechanical Contractor Application for Licensure and Instructions (Doc. 165, 12/22/2025 v2.2) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Form · verified September 17, 2026
- General and Mechanical Contractors - Primary Qualifying Party (PQP) and Qualifying Party (QP) Initial Application (Doc. 168, 12/19/2025 v2.1) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Form · verified September 17, 2026
- SC Contractor’s Licensing Board - Licensure with the Board (application, qualifying parties, exams, group limits, financial statements, bonds) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agency Page · verified September 17, 2026
- SC Contractor’s Licensing Board - Technical Exam Waiver Agreements (as of May 2026, Revised 5/2026) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agreement Document · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.