Wyoming to Arkansas: general contractor license reciprocity

How it works in Wyoming. No Wyoming agency issues a general, commercial, building or unlimited contractor license, and there is no state qualifying party, business-and-law examination or financial responsibility test. Cities and towns run the licensing, and the qualification is usually an ICC contractor examination plus documented experience. W.S. 16-6-1101 then makes those licenses portable within the state: 'each county, city, town and other government entity that issues licenses to contractors shall recognize a license issued to a contractor by another county, city, town or other government entity in Wyoming', provided the license is active, the contractor is in good standing with the issuing jurisdiction and supplies any required proof of financial assurance, and provided the contractor produces 'proof of the successful completion of the international code council examination for contractor, plumbing, mechanical or another appropriate examination, or an equivalent'; on that proof, 'no contractor shall be required to complete any testing in the accepting jurisdiction for recognition of the license.' Recognition is owed only for a license 'of a similar type or class', a jurisdiction may still require its own application, testing and fees for work beyond the scope of the original license or not at an equivalent level of competency, and it may deny a contractor whose license it has previously revoked or suspended. Nothing in the statute reaches a license issued outside Wyoming.

Cheyenne. The Class A General Contractor license 'entitles the holder to apply for permits for the construction, alteration, or repair of any type or size of structure, provided he/she employs properly licensed sub-contractors for all trades' - electrical, plumbing, refrigeration, HVAC and fire suppression must be subcontracted to their own licensees. The license is held by the company and qualified by a Class A qualified supervisor employed full time, who needs 'seven (7) years with fourteen thousand (14,000) hours comprehensive experience and/or education acceptable to the Board' and must pass an examination from the Board's list, administered by the ICC, NICET, NASCLA or another approved testing agency; the Board may also approve tests that exceed its published list for an applicant who holds an equivalent current license in another jurisdiction. A qualified supervisor may represent only one contractor, and a company that loses theirs has thirty days to register a replacement. Class A insurance is $1,000,000 per occurrence and $2,000,000 aggregate with the City of Cheyenne as certificate holder, plus Wyoming workers' compensation where required. Fees are $50 application, $600 initial and $200 renewal, with no credit for fees paid on a lower class when upgrading. Temporary work authorizations are available while an examination is pending. The Board's rules record that the Wyoming reciprocity statute covers 'jurisdictions in Wyoming ONLY' and that it evaluates such licenses case by case.

Casper. Community Development issues General and Sub Contractor licenses, and the filing is the application, notarized experience affidavits and proof of testing, with a certificate of insurance and the fee due before issue; the city points applicants to ICC testing. Its reciprocal contractor license explicitly covers General Contracting 'under the License Classification that the applicant currently holds within another Wyoming Jurisdiction', on documentation that the other Wyoming license is current and in good standing and proof of testing comparable to what Casper requires. Only Wyoming jurisdictions count. Insurance minimums quoted for the affected classifications are $250,000 per person, $500,000 aggregate and $250,000 property damage. The mechanical and plumbing licenses that sit under a general contractor each require a full-time master with ICC testing and cost $300 new and $150 to renew. Confirm general-contractor class letters, experience thresholds and fees with the Chief Building Official on (307) 235-8254 or [email protected].

Laramie. 'All general contractors working in Laramie are required to be licensed', and the electrical, mechanical, plumbing, lawn sprinkler, fire protection, gas service, water and sewer, refrigeration and petroleum piping trades are separately licensed down to apprentice level. The city uses a General Contractor Verification of Experience form and follows ICC standards, on the 2024 ICC code cycle since 1 September 2024. 'All required permits and licenses must be obtained before any work begins', and every contractor license expires on December 31, with renewals opening on November 15. Insurance limits, bond amounts and fees are not published on the licensing page; ask Code Administration.

Gillette. The Class A General Contractor license 'may construct, alter, add to, repair, or demolish any type or size of structure permitted by the adopted codes', and Class B stops at four-family dwellings of three stories or less and commercial buildings up to 5,000 square feet. Licensing applies whatever the size or duration of the job and whether or not a permit is needed. The company designates a Master of Record who is an owner or full-time employee and who 'shall be tested and certified through ICC and hold the appropriate certificate for the class of license', with sixty days to replace one who leaves. The Class A application fee is $500, licenses run one year, Class A liability insurance is $1,000,000 per occurrence and $2,000,000 aggregate, and an original license and permit bond of at least $5,000 naming the City of Gillette as obligee must stay in force for the term. Wyoming corporate registration in active and good standing is required of Wyoming and out-of-state contractors alike, along with Wyoming workers' compensation and unemployment insurance. Applications go before a Board of Examiners on published meeting dates; Building Inspection is on (307) 686-5260.

Sheridan. The Commercial Contractor license, $200 a year, allows the holder to 'construct, alter, remodel, repair any commercial, residential, or other building within the City of Sheridan' plus excavation work, and 'a Commercial Contractor shall not be limited to any building type.' Qualifications are the 2018 G11(A) or G12(B) ICC examination, a four-year journeyman carpenter verification, a two-year project verification, a $1,000,000 liability insurance certificate and a $25,000 license and permit bond. Subcontractors must be licensed in their own trades, with $1,000,000 liability and a $10,000 bond each; plumbing and HVAC companies also carry a Master of Record, and electrical contractors must hold the state license. Renewal is annual from the issue date, with a $100 delinquency fee and re-application, including examination, after a year lapsed. Note the tension worth raising before you apply: the city's packet says it 'does not accept licensing from other cities, towns, counties, or states as a means to obtain licensing locally', while W.S. 16-6-1101 requires Wyoming jurisdictions to recognize another Wyoming jurisdiction's active license on proof of the ICC or an equivalent examination. Ask the Building Division how it applies the statute.

Jackson and Teton County. The Town of Jackson's General Contractor (Class A) license covers 'construction, alteration or repair of any type or size of structure' and calls for '8 years of extensive commercial work', including three buildings 'at least two stories in height', with the ICC National Contractor/Trades examination on the 2018 I-Codes; the Class B license covers commercial and residential buildings not exceeding three stories on four years of experience including three buildings over 5,000 square feet. Licenses expire annually on December 31 and are handled in the SmartGov portal, where insurance and bond documents are uploaded, and the town publishes no bond form of its own. Jackson offers reciprocity to a contractor 'currently licensed and in good standing in a Wyoming jurisdiction that meets our licensing requirements.' In unincorporated Teton County there is no county license: the building codes resolution requires that 'contractors performing work requiring a permit under this code shall be required to be licensed and have in their possession a contractor's license issued by the Town of Jackson, Wyoming.' County permits and inspections are handled by Planning & Building Services on (307) 733-3959.

Everywhere else. Other Wyoming cities and towns set their own classes and thresholds, and some smaller jurisdictions require only a permit. Ask each building department which class covers the work, and where you already hold a Wyoming license, ask about recognition under W.S. 16-6-1101 before paying for another examination.