LicensebyState

Colorado to California: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 14 sources

Colorado does not issue a statewide residential contractor license, so there is nothing to transfer. Here is California's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Original B-2 application: out-of-state experience counts, both examinations required

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

CSLB publishes no trade examination waiver for the B-2 Residential Remodeling classification except for holders of a North Carolina Building Contractor license, so an applicant arriving from any other state files the Application for Original Contractor's License, pays the $450 processing fee and sits both the Law and Business examination and the B-2 trade examination through PSI. Work done in another state does count toward eligibility: the qualifying individual must show at least four years of experience within the past 10 years as a journeyperson, foreperson, supervising employee or contractor in the classification applied for, and Business and Professions Code section 7068(h) directs the registrar to review experience gained in other states and confirm it was gained lawfully there. Those claims go on a Certification of Work Experience form completed by someone with firsthand knowledge of the work, and CSLB may ask for documents to back them up. The NASCLA Commercial General Builders examination waiver that CSLB accepts from applicants in any state applies only to the CSLB General Building classification, not to B-2. Once CSLB accepts the application you have 18 months to pass both examinations, after which the application is void and you must file again with new fees.

California sets no net worth, working capital or financial statement requirement for a contractor license. The financial solvency section of the Contractors State License Law, Business and Professions Code section 7067.5, was repealed effective January 1, 2016 and the matching regulation on operating capital was repealed in 2016; the $25,000 contractor bond stands in its place. CSLB does not publish an end-to-end processing time from application to issued license, only the date each unit is currently working on, updated weekly on its Processing Times page. Questions about the B-2 classification or an application in progress go to the Licensing Information Center on (800) 321-CSLB (2752).

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • You must document at least 4 years of qualifying work experience.Journey-level means a worker who has completed an apprenticeship or is an experienced worker, not a trainee, and is fully qualified to perform the trade without supervision. Technical training, apprenticeship training or education can be credited in place of part of the four years, but at least one year must be practical experience and the training or education must be documented with apprenticeship certificates or college transcripts. The experience section of the application must be completed even by applicants who expect an examination waiver.
  • Experience earned outside California counts. Business and Professions Code section 7068(h) requires the registrar to review experience gained by applicants from other states and to determine that all of it was gained in a lawful manner in that state, so work performed where a license was required but not held may be rejected.
  • The qualifying individual is at least 18 years old and has a Social Security number or an Individual Taxpayer Identification Number. A qualifying individual may not hold another active contractor's license while acting as qualifier, except as allowed by Business and Professions Code section 7068.1.

What you'll do to get licensed in California

  1. 1Application fee. Pay the application fee ($450). Non-refundable original application fee of $450, covering one classification, payable with the Application for Original Contractor's License. Adding a second classification on the same original application costs $150..
  2. 2License fee. Pay the license or certificate fee ($200). Initial license fee of $200 for a sole owner, or $350 for a non-sole owner, paid after the examinations are passed and the remaining issuance documents are filed. It buys a two-year license. CSLB's own worked total for one classification is $650 for a sole owner and $800 for a non-sole owner, application fee included..
  3. 3Trade exam. Pass the destination's trade exam. B-2 Residential Remodeling trade examination, administered for CSLB by PSI Exams. It is not waived on this path. You have 18 months after CSLB accepts the application to pass it and the Law and Business examination; passing scores stay good for five years..
  4. 4Law / code exam. Pass a law, rules, or code exam. CSLB Law and Business examination, administered by PSI Exams. Every original applicant takes it, including anyone whose trade examination is waived by reciprocity..
  5. 5Exam fee. Pay the exam fee. Rescheduling and re-examination fees are paid directly to PSI each time. CSLB does not publish the amounts on its fee list; they are in the Candidate Information Bulletin PSI sends with the Notice to Schedule an Examination, or ask CSLB on (800) 321-CSLB (2752)..
  6. 6Background check. Complete a background check. Mandatory criminal background check by Live Scan fingerprinting after CSLB accepts the application. Paid to the Live Scan operator: $32 to the Department of Justice and $17 to the Federal Bureau of Investigation, plus a rolling fee that each site sets for itself and CSLB does not set..
  7. 7Surety bond. Post a surety bond ($25,000). Contractor's bond of $25,000, required by Business and Professions Code section 7071.6 before CSLB can issue an active license. It must be written by a surety licensed through the California Department of Insurance on a form approved by the Attorney General's Office, must name the business exactly as CSLB records it, and must reach CSLB headquarters within 90 days of its effective date. A cashier's check may be filed instead..
  8. 8Surety bond. Post a surety bond ($25,000) (if applicable). Bond of Qualifying Individual, $25,000, required by Business and Professions Code section 7071.9 when the license is qualified by a responsible managing employee, or by a responsible managing officer who owns less than 10 percent of the corporation's voting stock. An RMO who owns 10 percent or more files a Bond of Qualifying Individual Exemption Certification instead. Each RME or RMO on a license must comply separately..
  9. 9Surety bond. Post a surety bond ($100,000) (if applicable). LLC employee/worker bond of $100,000, required by Business and Professions Code section 7071.6.5 only where the license is held by a limited liability company. It is in addition to the $25,000 contractor bond and protects employees against unpaid wages, interest on wages, fringe benefits and other contributions..
  10. 10Insurance. Carry the required insurance ($1,000,000) (if applicable). Liability insurance of at least $1,000,000 cumulative, required by Business and Professions Code section 7071.19 only where the license is held by a limited liability company with five or fewer people listed as personnel of record. Each additional member of the personnel of record adds $100,000, capped at $5,000,000. The policy must be written by an insurer licensed in California or an eligible surplus line insurer..
  11. 11Insurance. Carry the required insurance. Workers' compensation insurance, or a certificate of self-insurance from the Department of Industrial Relations, before CSLB will issue or activate the license if the business has employees. A business with no employees files an exemption instead, but CSLB will not accept an exemption where the license is qualified by a responsible managing employee, because an RME is an employee..
  12. 12Business license. Obtain a business license. The CSLB license is issued to a business entity: sole owner, partnership, corporation, limited liability company or joint venture. Form or register the entity first, since every officer, member, responsible manager or director must be listed as personnel of record. Cities and counties also require their own business tax registration or business license wherever you work, separately from the CSLB license..
  13. 13Other. Certification of Work Experience form for each period of experience claimed, completed by an employer, fellow employee, other journeyperson, contractor, union representative, building inspector, architect, engineer or client who observed the work. CSLB does not visit worksites and does not accept photographs as proof, and it randomly reviews a percentage of experience statements..

Published fees on this path total $650, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam
  • Law / code exam
  • Exam fee

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $25,000
  • Surety bond · $25,000 · if applicable
  • Surety bond · $100,000 · if applicable

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance · $1,000,000 · if applicable
  • Insurance

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How California licenses residential contractors

California residential contractor · “B-2 Residential Remodeling Contractor (Class B General Building also covers homes)

Statewide license

Verified September 17, 2026· 6 sources

Issued by Contractors State License Board

California licenses residential contractors statewide through the Contractors State License Board (CSLB), and the homes-only classification is B-2 Residential Remodeling Contractor, created by Business and Professions Code section 7057.5 and issued since January 1, 2021. A B-2 contractor improves an existing residential wood frame structure and may only take a contract that requires at least three unrelated building trades or crafts; it cannot make structural changes to load-bearing parts of a building such as footings, foundations, load-bearing walls or roof structures, and it cannot install, replace or extend electrical, mechanical or plumbing systems unless it holds the matching specialty classification or subcontracts that work. A Class B General Building license also covers houses, including new construction and structural remodeling, so many residential builders apply for B instead of or as well as B-2. CSLB issues the license to a business (sole owner, partnership, corporation, limited liability company or joint venture) and the person who meets the experience and examination requirements is named on it as the qualifying individual, a responsible managing employee (RME) or responsible managing officer (RMO), so the reader who is moving states applies as that qualifier. A contractor license from another state cannot be used in California, even as a subcontractor or for a single project, and any project worth $1,000 or more in labor and materials, or any project needing a permit or workers, requires a CSLB license. Cities and counties separately require a local business tax registration, which is an additional step and not a substitute for the state license.

Moving to CaliforniaLeaving California

Why Colorado has nothing to transfer

Colorado residential contractor · “Residential / Home Builder contractor license (Class C in most jurisdictions)

Licensed by cities and counties

Verified September 17, 2026· 18 sources

Colorado issues no statewide residential or home builder contractor license. DORA's consumer page says plainly that general contractors are not licensed at the state level and tells consumers to check with their city, and the Pikes Peak Regional Building Department's exam notice states that "Colorado does NOT have a state license for the building or mechanical trades." Homebuilding is licensed instead by each city, county or regional building department, most of which use a Class C tier for one- and two-family dwellings; Denver calls it Residential Contractor Class C, Colorado Springs calls it Building Contractor C (Home Builder), Fort Collins splits it into Classes D1 and D2, and Aurora calls it Residential Building Contractor. The license is normally issued to the contracting business and is qualified by a named individual who holds the supervisor certificate, so an arriving builder usually applies for the personal certificate first and the company license second. Almost every licensing jurisdiction accepts the same underlying credential - the ICC National Standard Residential Building Contractor (C) examination - which makes the exam, rather than an out-of-state license, the thing that actually travels. A license must be obtained in each jurisdiction where the builder will pull permits, and a few places, such as unincorporated Douglas County, require only registration and no exam at all.

How local licensing works in Colorado

How local licensing works. There is no state contractor board, so each city, county or regional building department writes its own contractor ordinance under its building code. Class letters mean different things in different places, and holding a license in one Colorado jurisdiction does not let you pull permits in the next one. Most jurisdictions build the residential tier around the ICC National Standard Residential Building Contractor (C) examination, which is open book, multiple choice and delivered by Pearson VUE; the same exam appears under different ICC exam IDs (W13, F13, G13) because each jurisdiction adopts a different edition of the building code and requires a current one. Passing an ICC exam is not itself a license - it is a credential you then present to each building department, which also verifies your experience.

Denver. Licensing is two steps. The individual first earns a Residential Contractor Class C supervisor certificate, which covers erecting, adding to, altering or repairing one- and two-family dwellings, U occupancy buildings and attached single-unit dwellings (IRC townhouses). It requires two years of field work as a journeyman carpenter or construction foreman with foundation, framing and roofing experience, documented with notarized letters, plus ICC exam #F13 National Standard Residential Building Contractor C. The certificate costs $60 and renews every three years. The business then applies for the Residential Contractor Class C license, $250 for three years. Denver states that it "does not accept or reciprocate contractor licenses and/or certificates from other counties or states."

Colorado Springs, El Paso County and nearby towns (Pikes Peak Regional Building Department). PPRBD licenses for unincorporated El Paso County, Colorado Springs, Fountain, Manitou Springs, Green Mountain Falls, Monument, Palmer Lake, Calhan and Woodland Park. Building Contractor C (Home Builder) covers one- and two-family dwellings up to three stories plus accessory structures, and R-2 buildings of up to eight units and two stories; the license fee is $150 with a $50 non-refundable application fee. Building Contractor E covers residential accessory structures and interior nonstructural remodeling, $75. Applicants file three reference forms documenting experience, a liability insurance certificate naming PPRBD, a workers' compensation certificate or rejection of coverage, a Colorado certificate of good standing and a name-based judicial record check; the Licensing Committee and Board of Review act on each file. PPRBD accepts ICC National Standardized or ICC Colorado Standard exams passed on or after January 1, 2016 and states that "no out-of-state exams will be accepted."

Aurora. Residential Building Contractor "Requires ICC Residential Building Contractor 'C' Certification"; the supervisor license fee is $131 and the license fee is $235, and registration plus three job references are also required. Remodeling contractors register with three years of documented experience instead of taking an exam.

Fort Collins. The residential-only classes are D1 (single-family attached and detached, no more than two dwelling units, townhouses), D2 (detached garages and Group U Division 1 occupancies up to 1,000 sq ft), E(R) nonstructural residential alterations and MM. All of them require ICC exam G13, plus three project verifications, each with the permit and the final inspection or certificate of occupancy, signed by someone unconnected to the applicant's company. General liability of $1,000,000 per person and $2,000,000 per accident and aggregate is required. A new license with supervisor certificate is $300 for two years, including a $75 non-refundable application fee.

Boulder. Class C covers construction, alteration, wrecking or repair of any detached one- and two-family dwelling or townhome and requires the ICC C Contractors certificate. Boulder states that it "does not accept reciprocal licenses from other jurisdictions," and its license covers work inside city limits only. Fee amounts are published in Boulder's contractor license application and schedule of fees.

Jefferson County. For unincorporated Jefferson County, a Class C license (labeled 2018 G13) covers one- and two-family dwellings and accessory buildings. The county accepts "proof that you have passed an appropriate ICC exam within the last 3 years or ... a copy of a valid license issued from an ICC participating jurisdiction." The fee is $50 and the license renews annually.

Arapahoe County. Building Contractor Class C (residential) costs $180 and requires an ICC Class "C" certification or an equivalent certification from a recognized state or national certification entity. General liability of $1,000,000 per occurrence and $2,000,000 aggregate must name the county.

Lakewood. Contractors register with Public Works; class A-3 Residential covers new construction and remodeling. The registration page does not impose an exam on general contractors but asks A-1 and A-2 applicants to attach any ICC certifications held. The fee is $150 for the first probationary year and $400 for each subsequent three-year renewal.

Douglas County. Unincorporated Douglas County requires registration rather than a license and states that it "has no testing requirements." Registrants file the application, workers' compensation proof or an exemption statement and business liability insurance naming the Building Division; registration fees are currently waived and applications are processed in about two business days.

Out-of-state holders. No Colorado jurisdiction reviewed grants a residential contractor license on the strength of another state's license. Denver and Boulder say so expressly, and PPRBD will not accept out-of-state exam results. The practical route is to pass the ICC National Standard Residential Building Contractor (C) exam on a code edition the jurisdiction currently accepts, gather documented project experience and references, and then apply separately in each city or county where you intend to build. Jefferson County is the clearest exception: it will take a current license from another ICC participating jurisdiction in place of the exam. Confirm the class, exam code year and fee with the building department before applying, because these change independently in every jurisdiction.

Moving to ColoradoLeaving Colorado

Common questions

Do I have to take the California residential contractor exam if I'm licensed in Colorado?
Yes. California requires the trade exam on this path, plus a law or code exam.
What does it cost to get a California residential contractor license from Colorado?
Published fees on this path total $650, not counting exam vendor fees or bonds.
Do my Colorado work hours count in California?
Yes. Documented out-of-state experience counts toward California's eligibility requirements.
Does it work the other way, from California to Colorado?
Not necessarily. Reciprocity is directed. Going from California to Colorado, the mechanism is not applicable.

Sources

  1. California Business and Professions Code Sec. 7068 - Qualification of applicants; responsible managing employee; out-of-state experience · Cal. Bus. & Prof. Code Sec. 7068 · California Legislative Information (Office of Legislative Counsel) · Statute · verified September 17, 2026
  2. CSLB - Application for Original Contractors License · Cal. Bus. & Prof. Code Sec. 7065, 7065.1, 7065.2 · Contractors State License Board · Agency Page · verified September 17, 2026
  3. CSLB - Bond Requirements · Cal. Bus. & Prof. Code Sec. 7071.6, 7071.8, 7071.9 · Contractors State License Board · Agency Page · verified September 17, 2026
  4. CSLB - B General Building Contractor classification · Cal. Bus. & Prof. Code Sec. 7057 · Contractors State License Board · Agency Page · verified September 17, 2026
  5. CSLB - B-2 Residential Remodeling Contractor classification · Cal. Bus. & Prof. Code Sec. 7057.5 · Contractors State License Board · Agency Page · verified September 17, 2026
  6. CSLB - List of All CSLB Fees · Contractors State License Board · Agency Page · verified September 17, 2026
  7. CSLB - Get Licensed to Build: A Guide to Becoming a Licensed Contractor (May 2025) · Contractors State License Board · Other · verified September 17, 2026
  8. CSLB - Frequently Asked Questions About Journey-level Experience · Contractors State License Board · Faq · verified September 17, 2026
  9. Contractors State License Law - 2026 CSLB Law Book (B&P Code Division 3, Chapter 9 and 16 CCR Division 8) · Cal. Bus. & Prof. Code Sec. 7065.4, 7068; former Sec. 7067.5 (repealed 2016); 16 CCR Div. 8 · Contractors State License Board · Statute · verified September 17, 2026
  10. CSLB - Licenses for Limited Liability Companies (LLC) · Cal. Bus. & Prof. Code Sec. 7065, 7071.6.5, 7071.19, 7076.2 · Contractors State License Board · Agency Page · verified September 17, 2026
  11. CSLB - If You Already Have a Contractors License From Another State or Country · Contractors State License Board · Agency Page · verified September 17, 2026
  12. CSLB - Processing Times · Contractors State License Board · Agency Page · verified September 17, 2026
  13. CSLB - Reciprocal Classifications List · Contractors State License Board · Agency Page · verified September 17, 2026
  14. CSLB - Reciprocity Requirements · Contractors State License Board · Agency Page · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related