Colorado to Florida: residential contractor license reciprocity

Why this level is Hybrid. Under s. 489.105(8) and (10), F.S., DBPR both certifies contractors statewide and registers contractors who qualified through a local licensing board, and a registered contractor 'may contract only in such jurisdictions'. The board's own application list therefore carries paired occupation codes for every Division I class: CR and RR for residential, CB/RB for building, CG/RG for general. The local route exists in the larger counties, and a state certificate makes it unnecessary.

Miami-Dade County. The Construction Trades Qualifying Board licenses Building, Building Specialties, Electrical, Maintenance, Mechanical and Plumbing contractors under Chapter 10 of the county code. It reciprocates only with Broward and Palm Beach counties in specific trade categories, and requires at least 75 percent on journeyman exams and 70 percent on other reciprocal category exams. Separately, Miami-Dade offers state-certified contractors a voluntary registration that speeds up permit applications in unincorporated Miami-Dade by pre-verifying license status and insurance.

Broward County. The Building Code Division's Central Examining Boards issue county Certificates of Competency; the applications, examining board calendar and descriptions of mandatory and voluntary certifications are published in the county's contractor packet (954-765-4400 x9876).

Out-of-state applicants. No county program reviewed publishes a rule that recognizes an out-of-state contractor license. Reciprocity and endorsement are state routes on Forms CILB 32 and CILB 10, and the license they produce is valid in every Florida jurisdiction.

How local licensing works. There is no state contractor board, so each city, county or regional building department writes its own contractor ordinance under its building code. Class letters mean different things in different places, and holding a license in one Colorado jurisdiction does not let you pull permits in the next one. Most jurisdictions build the residential tier around the ICC National Standard Residential Building Contractor (C) examination, which is open book, multiple choice and delivered by Pearson VUE; the same exam appears under different ICC exam IDs (W13, F13, G13) because each jurisdiction adopts a different edition of the building code and requires a current one. Passing an ICC exam is not itself a license - it is a credential you then present to each building department, which also verifies your experience.

Denver. Licensing is two steps. The individual first earns a Residential Contractor Class C supervisor certificate, which covers erecting, adding to, altering or repairing one- and two-family dwellings, U occupancy buildings and attached single-unit dwellings (IRC townhouses). It requires two years of field work as a journeyman carpenter or construction foreman with foundation, framing and roofing experience, documented with notarized letters, plus ICC exam #F13 National Standard Residential Building Contractor C. The certificate costs $60 and renews every three years. The business then applies for the Residential Contractor Class C license, $250 for three years. Denver states that it "does not accept or reciprocate contractor licenses and/or certificates from other counties or states."

Colorado Springs, El Paso County and nearby towns (Pikes Peak Regional Building Department). PPRBD licenses for unincorporated El Paso County, Colorado Springs, Fountain, Manitou Springs, Green Mountain Falls, Monument, Palmer Lake, Calhan and Woodland Park. Building Contractor C (Home Builder) covers one- and two-family dwellings up to three stories plus accessory structures, and R-2 buildings of up to eight units and two stories; the license fee is $150 with a $50 non-refundable application fee. Building Contractor E covers residential accessory structures and interior nonstructural remodeling, $75. Applicants file three reference forms documenting experience, a liability insurance certificate naming PPRBD, a workers' compensation certificate or rejection of coverage, a Colorado certificate of good standing and a name-based judicial record check; the Licensing Committee and Board of Review act on each file. PPRBD accepts ICC National Standardized or ICC Colorado Standard exams passed on or after January 1, 2016 and states that "no out-of-state exams will be accepted."

Aurora. Residential Building Contractor "Requires ICC Residential Building Contractor 'C' Certification"; the supervisor license fee is $131 and the license fee is $235, and registration plus three job references are also required. Remodeling contractors register with three years of documented experience instead of taking an exam.

Fort Collins. The residential-only classes are D1 (single-family attached and detached, no more than two dwelling units, townhouses), D2 (detached garages and Group U Division 1 occupancies up to 1,000 sq ft), E(R) nonstructural residential alterations and MM. All of them require ICC exam G13, plus three project verifications, each with the permit and the final inspection or certificate of occupancy, signed by someone unconnected to the applicant's company. General liability of $1,000,000 per person and $2,000,000 per accident and aggregate is required. A new license with supervisor certificate is $300 for two years, including a $75 non-refundable application fee.

Boulder. Class C covers construction, alteration, wrecking or repair of any detached one- and two-family dwelling or townhome and requires the ICC C Contractors certificate. Boulder states that it "does not accept reciprocal licenses from other jurisdictions," and its license covers work inside city limits only. Fee amounts are published in Boulder's contractor license application and schedule of fees.

Jefferson County. For unincorporated Jefferson County, a Class C license (labeled 2018 G13) covers one- and two-family dwellings and accessory buildings. The county accepts "proof that you have passed an appropriate ICC exam within the last 3 years or ... a copy of a valid license issued from an ICC participating jurisdiction." The fee is $50 and the license renews annually.

Arapahoe County. Building Contractor Class C (residential) costs $180 and requires an ICC Class "C" certification or an equivalent certification from a recognized state or national certification entity. General liability of $1,000,000 per occurrence and $2,000,000 aggregate must name the county.

Lakewood. Contractors register with Public Works; class A-3 Residential covers new construction and remodeling. The registration page does not impose an exam on general contractors but asks A-1 and A-2 applicants to attach any ICC certifications held. The fee is $150 for the first probationary year and $400 for each subsequent three-year renewal.

Douglas County. Unincorporated Douglas County requires registration rather than a license and states that it "has no testing requirements." Registrants file the application, workers' compensation proof or an exemption statement and business liability insurance naming the Building Division; registration fees are currently waived and applications are processed in about two business days.

Out-of-state holders. No Colorado jurisdiction reviewed grants a residential contractor license on the strength of another state's license. Denver and Boulder say so expressly, and PPRBD will not accept out-of-state exam results. The practical route is to pass the ICC National Standard Residential Building Contractor (C) exam on a code edition the jurisdiction currently accepts, gather documented project experience and references, and then apply separately in each city or county where you intend to build. Jefferson County is the clearest exception: it will take a current license from another ICC participating jurisdiction in place of the exam. Confirm the class, exam code year and fee with the building department before applying, because these change independently in every jurisdiction.