Colorado to Hawaii: residential contractor license reciprocity
Colorado does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Hawaii's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Out-of-state experience credited toward the four years, full Hawaii examination (every state)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
The Board answers the question directly in its own FAQ: Hawaii has no reciprocity agreements with other states, and all applicants meet the same licensing and examination requirements. There is no verification-of-licensure form, no examination waiver and no NASCLA route, and a license held elsewhere is never exchanged for a Hawaii one. What an out-of-state builder does carry across is the work behind the license. The qualifying person must show four full years of supervisory experience within the past ten years in the classification applied for, and years spent supervising under another state's license count in full: the Board asks for proof of licensure, and an out-of-state contractor who held a license in that state is one of the people who may sign an experience certificate. The paperwork is the same for everyone. At least three notarized experience certificates, at least one for each classification and no two in a classification from the same person, plus a Chronological History of Projects listing every job, the trades subcontracted and the actual on-site supervision time. The Board reviews complete applications at its monthly meeting, then approves the applicant to sit the Hawaii examinations, which must be passed within six months.
Both examination parts are taken for the Class B general building classification: part I on Hawaii building, safety, health, labor and lien law and the administrative principles of contracting, part II on trade knowledge in the classification. Seventy-five percent is the pass mark for each part. The Board's examination page says the examinations moved to PSI Services LLC in January 2023, while the October 2025 requirement sheets still name Prometric; the examination approval letter names the testing agency, the examinations the applicant is eligible for and the date they must be passed by. HAR 16-77-41 excuses an examination only where the applicant previously qualified by written examination within four years and is applying in the same classification, which is about a lapsed Hawaii credential rather than an out-of-state one. Applying for the Class B license at the same time as a Class C specialty license needs a separate part II examination and a separate project list for each classification.
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- Four full years of supervisory experience within the ten years immediately before the application, in the classification applied for, at the level of journeyman, foreman, supervisor or contractor, counting only time actually spent on site supervising and directing employees.HRS 444-11(a)(2) lets the Board accept experience acquired on a self-employed or unlicensed basis where it can be verified. Technical training may be approved as acceptable experience but never counts for more than one year. Design time, ordering materials and scheduling around rain-outs or deliveries do not count.
- Supervisory years worked under another state's contractor license count toward the four years. The Board asks an applicant with licensed experience elsewhere to provide proof of licensure, and an out-of-state contractor who held a license in that state may sign an experience certificate. The proof of licensure does not replace the certificates or the project list.
- You must have no disciplinary action or unresolved complaints on your record.
- The qualifying person must be at least eighteen and, unless applying as a sole proprietor, must be employed by the licensed contracting entity as its Responsible Managing Employee. The principal RME must be in residence in Hawaii while the entity's license is in effect or a project is under construction, and a licensee must keep a physical place of business in the State; a post office box is not accepted.
What you'll do to get licensed in Hawaii
- 1Law / code exam. Pass a law, rules, or code exam. Part I of the contractor examination: the building, safety, health, labor and lien laws of Hawaii and the basic administrative principles of the contracting business. Seventy-five percent is needed to pass. It is never waived for an out-of-state applicant. The Board strongly recommends obtaining a copy of the contractor licensing law and rules before sitting it..
- 2Trade exam. Pass the destination's trade exam. Part II of the contractor examination: trade knowledge in the classification requested, here Class B general building. Seventy-five percent is needed to pass. The applicant registers with the testing agency only after the Board approves the application and issues an examination approval letter, and must pass both parts within six months or file a new application and fee. A failed part may be retaken for a further fee inside that six-month window..
- 3Application fee. Pay the application fee ($50). $50 nonrefundable application fee for each application filed, payable to Commerce and Consumer Affairs. More than one classification may be requested on a single application, but a contracting entity and its Responsible Managing Employee file separate applications and pay the fee separately, so an inbound company and its qualifying person pay $50 each. A further $10 contractors education fund fee accompanies every application, and a dishonored payment carries a $25 service charge..
- 4Exam fee. Pay the exam fee. Examination fees are paid directly to the testing agency when the approved applicant registers, and are charged for each part taken. The Board's published FAQ lists $75 per part, with most classifications taking both parts, but that document dates from before the examinations moved to PSI Services LLC, so confirm the current amount with PSI on (833) 333-4754 before registering. An interpreter, if the Board approves one, adds $100 to the examination fee..
- 5License fee. Pay the license or certificate fee. The Board assesses the license fee after the application is approved and the examinations are passed, telling the applicant the exact amount at that point. Its published FAQ gives $663 for a contracting entity or sole proprietor licensed in the first year of the two-year cycle and $494 in the second, and $438 or $334 on the same split for a Responsible Managing Employee, so budget for both. Licenses run to September 30 of the next even-numbered year whatever date they were issued. On-time renewal currently costs $338 for an entity or sole proprietor, $208 for an RME and $160 for an inactive license, plus $5 education fund and $10 recovery fund fees..
- 6Financial responsibility. Show financial responsibility. A current financial statement, dated within one year, that is compiled, reviewed or audited and accompanied by an independent accountant's report from a CPA or public accountant holding a current permit to practice; an accountant licensed in another state attaches a copy of that license. For compiled and reviewed statements the applicant also signs the Board's own Financial Statement form CT-02 whether or not the accountant used it. The Board publishes no minimum net worth or working capital figure: it weighs the statement together with the credit reports and the tax clearance to decide whether the applicant has financial integrity, and whether to impose a bond. RMEs do not file a financial statement; the entity or sole proprietor does..
- 7Surety bond. Post a surety bond (if applicable). A surety bond is not automatic in Hawaii. The Board may require one as proof of financial integrity, and sets the amount case by case; the bond form leaves the penal sum blank. Where one is imposed, it runs to the State of Hawaii on form CT-09, is conditioned on compliance with HRS chapter 444 and on paying employees' wages, is continuous, and can be canceled by the surety only on thirty days' written notice. Both the applicant and the surety notarize it. After a licensee has maintained the bond for at least a year it may ask the Board to waive it on proof of financial integrity, supported by current credit reports, financial statements and a tax clearance..
- 8Insurance. Carry the required insurance. A certificate of comprehensive liability and property damage insurance with minimum limits of $100,000 bodily injury each person, $300,000 bodily injury each occurrence and $50,000 property damage each occurrence, plus a workers' compensation certificate from a carrier authorized in Hawaii or proof of self-insurance or exclusion. An out-of-state contractor may use a non-admitted carrier where the producer qualifies for an exemption under HRS 431:9A-104(b)(6). Coverage must be continuous for the life of the license: a lapse forfeits both the entity and the RME license automatically, and if it is not restored within sixty days both must apply as new applicants. Certificates are filed fastest through the Board's online insurance submittal system..
- 9Business license. Obtain a business license. The contracting entity must be registered with the DCCA Business Registration Division before it can be licensed: a Hawaii corporation or LLC files a stamped copy of its articles, a foreign corporation its certificate of authority and a partnership its registration statement, and an entity registered for more than a year attaches a Certificate of Good Standing issued within the past year. Any trade name must be separately registered and a filed-stamped copy supplied. A current Hawaii tax clearance, issued within six months, is filed with the application and again at every renewal, and the name on it must match the license name exactly..
- 10Background check. Complete a background check. A current and complete credit report for each officer, partner, manager or member, issued not more than six months earlier and covering at least the previous five years, showing each current and past debt, its status and any public records; a summary or a bare credit score is not accepted. Where a partner or member is itself a business, the credit reports of its officers or a comprehensive business credit report are filed instead. The RME files a credit report with the RME application as well..
- 11Continuing education. Complete continuing education (if applicable). Hawaii imposes no continuing education requirement on contractors. Renewal by September 30 of each even-numbered year instead turns on continued financial integrity: a current tax clearance or payment arrangement, a statement about any liens, undisputed debts or judgments, proof that workers' compensation and liability coverage have been maintained without a break, and proof that any bond the Board imposed is current..
- 12Other. The application, fee and every supporting document must reach the Board's Honolulu office on or before the first Tuesday of the month before the meeting at which it will be considered; the Board meets monthly except in December, and faxed or emailed copies are not accepted. An application is abandoned if licensure is not completed within a year of filing or the examinations are not passed after eligibility, and the Board keeps a denied application for two years. A Social Security number must be given or the application is treated as deficient..
Published fees on this path total $50, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam
- Exam fee
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · if applicable
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education · if applicable
How Hawaii licenses residential contractors
Hawaii residential contractor · “Class B General Building Contractor (no separate residential class)”
Statewide license
Issued by Hawaii Contractors License Board (DCCA Professional and Vocational Licensing Division)
Hawaii has no residential contractor license. The Contractors License Board, in the Department of Commerce and Consumer Affairs, classifies every contractor into exactly three branches under HRS 444-7: Class A general engineering, Class B general building and Class C specialty. Houses fall inside Class B, which covers any structure built for the support, shelter and enclosure of persons or property whose construction uses more than two unrelated building trades, so a homebuilder in Hawaii holds the same license as a commercial builder and this page points at Class B for both levels. Two limits are worth knowing. A Class B license does not let the holder take a contract that needs only one or two unrelated trades unless the holder also carries the matching Class C specialty license, and it never covers electrical or plumbing work, which needs both the C-13 or C-37 classification and an individually licensed electrician or plumber. The license is entity-held and qualified by a named person: a corporation, partnership, joint venture, LLC or LLP is licensed only while it employs a licensed Responsible Managing Employee, the RME sits the examinations and proves the experience, and the two file separate applications and pay separate fees. An individual who will trade in their own name applies instead as a licensed sole proprietor.
Why Colorado has nothing to transfer
Colorado residential contractor · “Residential / Home Builder contractor license (Class C in most jurisdictions)”
Licensed by cities and counties
Colorado issues no statewide residential or home builder contractor license. DORA's consumer page says plainly that general contractors are not licensed at the state level and tells consumers to check with their city, and the Pikes Peak Regional Building Department's exam notice states that "Colorado does NOT have a state license for the building or mechanical trades." Homebuilding is licensed instead by each city, county or regional building department, most of which use a Class C tier for one- and two-family dwellings; Denver calls it Residential Contractor Class C, Colorado Springs calls it Building Contractor C (Home Builder), Fort Collins splits it into Classes D1 and D2, and Aurora calls it Residential Building Contractor. The license is normally issued to the contracting business and is qualified by a named individual who holds the supervisor certificate, so an arriving builder usually applies for the personal certificate first and the company license second. Almost every licensing jurisdiction accepts the same underlying credential - the ICC National Standard Residential Building Contractor (C) examination - which makes the exam, rather than an out-of-state license, the thing that actually travels. A license must be obtained in each jurisdiction where the builder will pull permits, and a few places, such as unincorporated Douglas County, require only registration and no exam at all.
How local licensing works in Colorado
How local licensing works. There is no state contractor board, so each city, county or regional building department writes its own contractor ordinance under its building code. Class letters mean different things in different places, and holding a license in one Colorado jurisdiction does not let you pull permits in the next one. Most jurisdictions build the residential tier around the ICC National Standard Residential Building Contractor (C) examination, which is open book, multiple choice and delivered by Pearson VUE; the same exam appears under different ICC exam IDs (W13, F13, G13) because each jurisdiction adopts a different edition of the building code and requires a current one. Passing an ICC exam is not itself a license - it is a credential you then present to each building department, which also verifies your experience.
Denver. Licensing is two steps. The individual first earns a Residential Contractor Class C supervisor certificate, which covers erecting, adding to, altering or repairing one- and two-family dwellings, U occupancy buildings and attached single-unit dwellings (IRC townhouses). It requires two years of field work as a journeyman carpenter or construction foreman with foundation, framing and roofing experience, documented with notarized letters, plus ICC exam #F13 National Standard Residential Building Contractor C. The certificate costs $60 and renews every three years. The business then applies for the Residential Contractor Class C license, $250 for three years. Denver states that it "does not accept or reciprocate contractor licenses and/or certificates from other counties or states."
Colorado Springs, El Paso County and nearby towns (Pikes Peak Regional Building Department). PPRBD licenses for unincorporated El Paso County, Colorado Springs, Fountain, Manitou Springs, Green Mountain Falls, Monument, Palmer Lake, Calhan and Woodland Park. Building Contractor C (Home Builder) covers one- and two-family dwellings up to three stories plus accessory structures, and R-2 buildings of up to eight units and two stories; the license fee is $150 with a $50 non-refundable application fee. Building Contractor E covers residential accessory structures and interior nonstructural remodeling, $75. Applicants file three reference forms documenting experience, a liability insurance certificate naming PPRBD, a workers' compensation certificate or rejection of coverage, a Colorado certificate of good standing and a name-based judicial record check; the Licensing Committee and Board of Review act on each file. PPRBD accepts ICC National Standardized or ICC Colorado Standard exams passed on or after January 1, 2016 and states that "no out-of-state exams will be accepted."
Aurora. Residential Building Contractor "Requires ICC Residential Building Contractor 'C' Certification"; the supervisor license fee is $131 and the license fee is $235, and registration plus three job references are also required. Remodeling contractors register with three years of documented experience instead of taking an exam.
Fort Collins. The residential-only classes are D1 (single-family attached and detached, no more than two dwelling units, townhouses), D2 (detached garages and Group U Division 1 occupancies up to 1,000 sq ft), E(R) nonstructural residential alterations and MM. All of them require ICC exam G13, plus three project verifications, each with the permit and the final inspection or certificate of occupancy, signed by someone unconnected to the applicant's company. General liability of $1,000,000 per person and $2,000,000 per accident and aggregate is required. A new license with supervisor certificate is $300 for two years, including a $75 non-refundable application fee.
Boulder. Class C covers construction, alteration, wrecking or repair of any detached one- and two-family dwelling or townhome and requires the ICC C Contractors certificate. Boulder states that it "does not accept reciprocal licenses from other jurisdictions," and its license covers work inside city limits only. Fee amounts are published in Boulder's contractor license application and schedule of fees.
Jefferson County. For unincorporated Jefferson County, a Class C license (labeled 2018 G13) covers one- and two-family dwellings and accessory buildings. The county accepts "proof that you have passed an appropriate ICC exam within the last 3 years or ... a copy of a valid license issued from an ICC participating jurisdiction." The fee is $50 and the license renews annually.
Arapahoe County. Building Contractor Class C (residential) costs $180 and requires an ICC Class "C" certification or an equivalent certification from a recognized state or national certification entity. General liability of $1,000,000 per occurrence and $2,000,000 aggregate must name the county.
Lakewood. Contractors register with Public Works; class A-3 Residential covers new construction and remodeling. The registration page does not impose an exam on general contractors but asks A-1 and A-2 applicants to attach any ICC certifications held. The fee is $150 for the first probationary year and $400 for each subsequent three-year renewal.
Douglas County. Unincorporated Douglas County requires registration rather than a license and states that it "has no testing requirements." Registrants file the application, workers' compensation proof or an exemption statement and business liability insurance naming the Building Division; registration fees are currently waived and applications are processed in about two business days.
Out-of-state holders. No Colorado jurisdiction reviewed grants a residential contractor license on the strength of another state's license. Denver and Boulder say so expressly, and PPRBD will not accept out-of-state exam results. The practical route is to pass the ICC National Standard Residential Building Contractor (C) exam on a code edition the jurisdiction currently accepts, gather documented project experience and references, and then apply separately in each city or county where you intend to build. Jefferson County is the clearest exception: it will take a current license from another ICC participating jurisdiction in place of the exam. Confirm the class, exam code year and fee with the building department before applying, because these change independently in every jurisdiction.
- Denver (Community Planning and Development)
- Colorado Springs / El Paso County (Pikes Peak Regional Building Department)
- Aurora (Building Division)
- Fort Collins (Planning and Development Services)
- Lakewood (Public Works)
- Boulder
- Jefferson County (Division of Building Safety)
- Arapahoe County (Building Division)
- Douglas County (Building Division)
Common questions
- Do I have to take the Hawaii residential contractor exam if I'm licensed in Colorado?
- Yes. Hawaii requires the trade exam on this path, plus a law or code exam.
- What does it cost to get a Hawaii residential contractor license from Colorado?
- Published fees on this path total $50, not counting exam vendor fees or bonds.
- Do my Colorado work hours count in Hawaii?
- Yes. Documented out-of-state experience counts toward Hawaii's eligibility requirements.
- Does it work the other way, from Hawaii to Colorado?
- Not necessarily. Reciprocity is directed. Going from Hawaii to Colorado, the mechanism is not applicable.
Sources
- Contractors License Board Application Forms and Publications - DCCA Hawaii · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
- Contractors License Board - Hawaii Department of Commerce and Consumer Affairs · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
- Bond Form - Contractors License (form CT-09, rev. 09/2013) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
- Description of Contractor License Classifications - Hawaii Contractors License Board · Hawaii DCCA, Contractors License Board · Other · verified September 17, 2026
- Contractors License Board Examination - Application Deadline and Examination Dates · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
- Contractor Frequently Asked Questions - Hawaii Contractors License Board · Hawaii DCCA, Professional and Vocational Licensing Division · Faq · verified September 17, 2026
- Contractors Financial Statement (prescribed form CT-02, rev. 11/2017) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
- Requirements for License - Contractor, Entity (Form CT-00, rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
- Requirements for License - Contractor, Responsible Managing Employee (Form CT-00(A), rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
- Requirements for License - Contractor, Sole Proprietor (rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
- Hawaii Administrative Rules Title 16, Chapter 77 - Contractors · HAR 16-77-6, 16-77-8, 16-77-11, 16-77-12, 16-77-28, 16-77-32, 16-77-33, 16-77-35, 16-77-39 to 16-77-46, 16-77-54, 16-77-55, 16-77-71, 16-77-76, 16-77-89 · Hawaii DCCA, Contractors License Board · Admin Rule · verified September 17, 2026
- HRS 444-11 - No license issued when (contractor qualifications) · HRS 444-11 · Hawaii State Legislature · Statute · verified September 17, 2026
- HRS 444-7 - Classification (contractors) · HRS 444-7 · Hawaii State Legislature · Statute · verified September 17, 2026
- HRS 444-9 - Licenses required (contractors) · HRS 444-9 · Hawaii State Legislature · Statute · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.