Colorado to Wisconsin: residential contractor license reciprocity
Colorado does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Wisconsin's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
No credit for an out-of-state contractor license (every state)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Wisconsin publishes no reciprocity, endorsement or exam-waiver route for contractors, and a residential builder's license from another state earns no credit toward either Wisconsin credential. The only reciprocity provision in the DSPS trades rules, SPS 305.47, is limited to electricians and electrical contractors under Wis. Stat. 101.874, and the service-member and spouse reciprocal credential in Wis. Stat. 440.09 reaches only credentials issued under chapters 440 to 480, which does not include these chapter 101 trades certifications. There is also nothing to waive on the examination side: DSPS administers no examination for the dwelling credentials, and the fee table in SPS 305.02 carries no examination fee for any of them. An applicant arriving from any state therefore takes exactly the route a Wisconsin resident takes: 12 hours of an approved initial qualifier course finished within the year before applying for the Qualifier certification, and bond or liability insurance plus the worker's compensation and unemployment compensation attestations for the Dwelling Contractor certification, both filed in LicensE at license.wi.gov. Wisconsin sets no minimum years of experience and no apprenticeship for either credential, so documented out-of-state work neither shortens nor replaces a step, and several approved qualifier courses are delivered online, which means the course can be taken before the move.
The law exam flag here means the tests built into the approved 12-hour initial qualifier course, which Wis. Admin. Code SPS 305.315(2)(c) requires to cover construction laws, construction codes and construction business practices. DSPS itself gives no proctored trade or business-and-law examination for these credentials. Wis. Stat. 101.654(1m)(b)3. separately provides for an examination developed by the department on the required continuing education courses for anyone who did not hold a certificate of financial responsibility on 11 April 2006; SPS 305.02's fee table shows no examination fee for the dwelling credentials and neither DSPS form mentions a test date, so ask DSPS on (608) 266-2112 how that provision is applied before you plan around it. Wis. Stat. 101.654(3)(a)3., added in 2021, also requires 12 hours of department-approved education on accounting, lien law, ethics and best business practices for the certificate of financial responsibility; the Dwelling Contractor page and Form 3096 describe only the financial-responsibility and attestation items, so confirm with DSPS which course satisfies it. A contractor who already holds a current DSPS trades license and pulls a permit for work that license covers is exempt from the continuing education requirement under Wis. Stat. 101.654(1)(c)2.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Do not count
What you must already have
- The approved 12-hour initial qualifier course in dwelling construction must have been completed within one year before the date of the Dwelling Contractor Qualifier application. A course finished earlier than that does not count and has to be retaken.Wis. Admin. Code SPS 305.315(2)(c) and DSPS Form 3097. Verification of completion is uploaded with the application in LicensE.
- Wisconsin sets no minimum trade experience, apprenticeship or period of prior licensure for either dwelling credential, and credits nothing toward them for an out-of-state contractor license, an out-of-state examination or documented out-of-state projects.Neither Wis. Stat. 101.654 nor Wis. Admin. Code SPS 305.31 and SPS 305.315 contains an experience requirement or an out-of-state recognition clause, and DSPS Forms 3096 and 3097 list no experience table and no reciprocity category. Wisconsin also does not accept the NASCLA Accredited Examination, which is not surprising given that it holds no examination of its own here.
- The Dwelling Contractor certification is applied for by a named principal: the owner of the contracting business, a partner applying on behalf of a partnership, or the chairman of the board or chief executive officer applying on behalf of a corporation.Wis. Admin. Code SPS 305.31(3)(b) and DSPS Form 3096, item 2. Under SPS 305.02(4)(a) a business operating from several locations under one federal employer identification number needs only one dwelling contractor certification.
What you'll do to get licensed in Wisconsin
- 1Law / code exam. Pass a law, rules, or code exam. At least 12 hours in a DSPS-approved initial qualifier course in dwelling construction, completed within one year before the Dwelling Contractor Qualifier application. The course must include instruction and one or more tests on construction laws, construction codes and construction business practices. DSPS publishes a list of approved course providers rather than individual courses, and directs questions about a course to the provider; several providers deliver the 12 hours online, so it can be finished before you move to Wisconsin. DSPS holds no examination of its own for this credential and charges no examination fee for it..
- 2Application fee. Pay the application fee ($15). Application fee for the Dwelling Contractor Qualifier certification, set at $15 by Wis. Admin. Code SPS 305.02, Table 305.02. Fees are calculated and paid in LicensE at license.wi.gov when the application is filed..
- 3License fee. Pay the license or certificate fee ($30). Certification fee for the Dwelling Contractor Qualifier, $30 under Table 305.02. The Qualifier certification runs for two years from the date of issuance (Table 305.06) and renews for $30, with a $25 late continuing education fee where that applies and a $200 reinstatement fee if it has lapsed..
- 4Application fee. Pay the application fee ($15). Application fee for the Dwelling Contractor certification, set at $15 by Table 305.02. It is separate from the Qualifier application fee, because a contractor who is both the business principal and the qualifier is applying for two credentials..
- 5License fee. Pay the license or certificate fee ($25). Certification fee for the Dwelling Contractor certification, $25 under Table 305.02, and the same $25 for the Dwelling Contractor Restricted version. The certification is valid for one year from the date of issuance and renews annually for $25; a certification expired more than a year needs a fresh application, supporting documents and a $200 reinstatement fee..
- 6Insurance. Carry the required insurance. Proof of financial responsibility, satisfied either by a general liability policy insuring the applicant for at least $250,000 per occurrence for bodily injury to or death of others or damage to the property of others, or by the surety bond below. The insurer must be authorized to do business in Wisconsin or eligible as a surplus lines insurer in one or more states. The policy may not be canceled except on 30 days' written notice to DSPS, or 10 days for nonpayment of premium, and proof of replacement cover must be filed inside that window or DSPS suspends the certification without a hearing. The application also carries attestations that the business complies with Wisconsin worker's compensation law (Wis. Stat. ch. 102) and unemployment compensation law (Wis. Stat. ch. 108)..
- 7Surety bond. Post a surety bond (if applicable). A surety bond endorsed by a company authorized to do business in Wisconsin is the alternative to the liability policy. DSPS's Form 3096 asks for a bond of at least $25,000 for the full Dwelling Contractor certification; the statutory floor in Wis. Stat. 101.654(2)(a)1. is $5,000, and an applicant using a bond of less than $25,000 is issued the Dwelling Contractor Restricted certification instead and agrees not to work on any dwelling whose estimated cost of completion is greater than the bond amount. The bond runs in the name of the state for the benefit of anyone who suffers a loss from a breach of the one- and two-family dwelling code, and carries the same 30-day cancellation notice rule as the insurance policy..
- 8Continuing education. Complete continuing education. At least 12 hours of DSPS-approved continuing education before the Qualifier certification expires. Wis. Stat. 101.654(1m)(b)1. requires those 12 hours every two years and requires at least 4 of them to be on construction laws and codes and on contracts, liability and risk management. Credit comes from seminars and workshops attended in person or by remote classroom, from teaching a program (first offering only), from webinars and other distance courses, and from technical or professional society meetings, which are capped at 6 hours per renewal cycle. A distance course needs at least 10 review questions per credit hour, and a question-and-answer course at least 30 questions per credit hour with a passing score of 70 percent. DSPS may approve continuing education courses offered by other states..
- 9Background check. Complete a background check. DSPS Form 2255, Trades Convictions and Pending Charges, is filed with the application where it applies. Wis. Stat. 101.654(5) lets the department revoke or suspend the certification for a conviction of a crime related to the construction of a dwelling, for building without a required permit, for failing the continuing education requirement, or for having been adjudged bankrupt on two or more occasions..
- 10Other. Both applications are filed in the LicensE portal at license.wi.gov, with the initial qualifier course verification and the bond or insurance certificate uploaded there; anything DSPS asks for later must be uploaded within three months or the application may have to be refiled and the fees paid again. Once certified, the holder may not start construction until the uniform building permit under SPS 320.08 is issued by the municipality, and may not start a private onsite wastewater treatment system until the sanitary permit under SPS 383.21 is issued. Milwaukee adds a City of Milwaukee Home Improvement Contractor License for work on single-family homes, duplexes and apartment buildings of six units or fewer, so check the requirements of the city or county that will issue your permits as well..
Published fees on this path total $85, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · if applicable
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education
How Wisconsin licenses residential contractors
Wisconsin residential contractor · “Dwelling Contractor certification, with a Dwelling Contractor Qualifier”
Statewide license
Issued by Wisconsin Department of Safety and Professional Services (DSPS)
Wisconsin licenses housebuilding statewide through the Department of Safety and Professional Services, and it takes two separate credentials rather than one. Under Wis. Admin. Code SPS 305.31 no person may obtain a building permit for a one- or two-family dwelling unless that person holds a Dwelling Contractor certification (or a Dwelling Contractor Restricted certification) and holds, or employs, someone who holds a Dwelling Contractor Qualifier certification. The Dwelling Contractor certification is the business-side credential: it is applied for by the owner of the contracting business, a partner on behalf of a partnership, or the chairman of the board or chief executive officer on behalf of a corporation, and it is granted on attestations of worker's compensation and unemployment compensation compliance plus proof of financial responsibility, which is either a surety bond or a general liability policy of at least $250,000 per occurrence. The Dwelling Contractor Qualifier certification is the personal credential and the one that carries the coursework and the testing: the applicant must have completed at least 12 hours in a DSPS-approved initial qualifier course in dwelling construction within the year before applying, and that course must include one or more tests on construction laws, construction codes and construction business practices. A contractor moving to Wisconsin to build or remodel houses normally needs both, files both in the LicensE portal at license.wi.gov, and should note that these credentials reach one- and two-family dwellings only. Wisconsin issues no state license for general or commercial building work, and a homeowner who lives or will live in the dwelling is exempt from the Dwelling Contractor requirement for work on their own home.
Why Colorado has nothing to transfer
Colorado residential contractor · “Residential / Home Builder contractor license (Class C in most jurisdictions)”
Licensed by cities and counties
Colorado issues no statewide residential or home builder contractor license. DORA's consumer page says plainly that general contractors are not licensed at the state level and tells consumers to check with their city, and the Pikes Peak Regional Building Department's exam notice states that "Colorado does NOT have a state license for the building or mechanical trades." Homebuilding is licensed instead by each city, county or regional building department, most of which use a Class C tier for one- and two-family dwellings; Denver calls it Residential Contractor Class C, Colorado Springs calls it Building Contractor C (Home Builder), Fort Collins splits it into Classes D1 and D2, and Aurora calls it Residential Building Contractor. The license is normally issued to the contracting business and is qualified by a named individual who holds the supervisor certificate, so an arriving builder usually applies for the personal certificate first and the company license second. Almost every licensing jurisdiction accepts the same underlying credential - the ICC National Standard Residential Building Contractor (C) examination - which makes the exam, rather than an out-of-state license, the thing that actually travels. A license must be obtained in each jurisdiction where the builder will pull permits, and a few places, such as unincorporated Douglas County, require only registration and no exam at all.
How local licensing works in Colorado
How local licensing works. There is no state contractor board, so each city, county or regional building department writes its own contractor ordinance under its building code. Class letters mean different things in different places, and holding a license in one Colorado jurisdiction does not let you pull permits in the next one. Most jurisdictions build the residential tier around the ICC National Standard Residential Building Contractor (C) examination, which is open book, multiple choice and delivered by Pearson VUE; the same exam appears under different ICC exam IDs (W13, F13, G13) because each jurisdiction adopts a different edition of the building code and requires a current one. Passing an ICC exam is not itself a license - it is a credential you then present to each building department, which also verifies your experience.
Denver. Licensing is two steps. The individual first earns a Residential Contractor Class C supervisor certificate, which covers erecting, adding to, altering or repairing one- and two-family dwellings, U occupancy buildings and attached single-unit dwellings (IRC townhouses). It requires two years of field work as a journeyman carpenter or construction foreman with foundation, framing and roofing experience, documented with notarized letters, plus ICC exam #F13 National Standard Residential Building Contractor C. The certificate costs $60 and renews every three years. The business then applies for the Residential Contractor Class C license, $250 for three years. Denver states that it "does not accept or reciprocate contractor licenses and/or certificates from other counties or states."
Colorado Springs, El Paso County and nearby towns (Pikes Peak Regional Building Department). PPRBD licenses for unincorporated El Paso County, Colorado Springs, Fountain, Manitou Springs, Green Mountain Falls, Monument, Palmer Lake, Calhan and Woodland Park. Building Contractor C (Home Builder) covers one- and two-family dwellings up to three stories plus accessory structures, and R-2 buildings of up to eight units and two stories; the license fee is $150 with a $50 non-refundable application fee. Building Contractor E covers residential accessory structures and interior nonstructural remodeling, $75. Applicants file three reference forms documenting experience, a liability insurance certificate naming PPRBD, a workers' compensation certificate or rejection of coverage, a Colorado certificate of good standing and a name-based judicial record check; the Licensing Committee and Board of Review act on each file. PPRBD accepts ICC National Standardized or ICC Colorado Standard exams passed on or after January 1, 2016 and states that "no out-of-state exams will be accepted."
Aurora. Residential Building Contractor "Requires ICC Residential Building Contractor 'C' Certification"; the supervisor license fee is $131 and the license fee is $235, and registration plus three job references are also required. Remodeling contractors register with three years of documented experience instead of taking an exam.
Fort Collins. The residential-only classes are D1 (single-family attached and detached, no more than two dwelling units, townhouses), D2 (detached garages and Group U Division 1 occupancies up to 1,000 sq ft), E(R) nonstructural residential alterations and MM. All of them require ICC exam G13, plus three project verifications, each with the permit and the final inspection or certificate of occupancy, signed by someone unconnected to the applicant's company. General liability of $1,000,000 per person and $2,000,000 per accident and aggregate is required. A new license with supervisor certificate is $300 for two years, including a $75 non-refundable application fee.
Boulder. Class C covers construction, alteration, wrecking or repair of any detached one- and two-family dwelling or townhome and requires the ICC C Contractors certificate. Boulder states that it "does not accept reciprocal licenses from other jurisdictions," and its license covers work inside city limits only. Fee amounts are published in Boulder's contractor license application and schedule of fees.
Jefferson County. For unincorporated Jefferson County, a Class C license (labeled 2018 G13) covers one- and two-family dwellings and accessory buildings. The county accepts "proof that you have passed an appropriate ICC exam within the last 3 years or ... a copy of a valid license issued from an ICC participating jurisdiction." The fee is $50 and the license renews annually.
Arapahoe County. Building Contractor Class C (residential) costs $180 and requires an ICC Class "C" certification or an equivalent certification from a recognized state or national certification entity. General liability of $1,000,000 per occurrence and $2,000,000 aggregate must name the county.
Lakewood. Contractors register with Public Works; class A-3 Residential covers new construction and remodeling. The registration page does not impose an exam on general contractors but asks A-1 and A-2 applicants to attach any ICC certifications held. The fee is $150 for the first probationary year and $400 for each subsequent three-year renewal.
Douglas County. Unincorporated Douglas County requires registration rather than a license and states that it "has no testing requirements." Registrants file the application, workers' compensation proof or an exemption statement and business liability insurance naming the Building Division; registration fees are currently waived and applications are processed in about two business days.
Out-of-state holders. No Colorado jurisdiction reviewed grants a residential contractor license on the strength of another state's license. Denver and Boulder say so expressly, and PPRBD will not accept out-of-state exam results. The practical route is to pass the ICC National Standard Residential Building Contractor (C) exam on a code edition the jurisdiction currently accepts, gather documented project experience and references, and then apply separately in each city or county where you intend to build. Jefferson County is the clearest exception: it will take a current license from another ICC participating jurisdiction in place of the exam. Confirm the class, exam code year and fee with the building department before applying, because these change independently in every jurisdiction.
- Denver (Community Planning and Development)
- Colorado Springs / El Paso County (Pikes Peak Regional Building Department)
- Aurora (Building Division)
- Fort Collins (Planning and Development Services)
- Lakewood (Public Works)
- Boulder
- Jefferson County (Division of Building Safety)
- Arapahoe County (Building Division)
- Douglas County (Building Division)
Common questions
- Do I have to take the Wisconsin residential contractor exam if I'm licensed in Colorado?
- The trade exam is waived, but Wisconsin requires a law or code exam.
- What does it cost to get a Wisconsin residential contractor license from Colorado?
- Published fees on this path total $85, not counting exam vendor fees or bonds.
- Do my Colorado work hours count in Wisconsin?
- No. Wisconsin does not credit out-of-state hours on this path.
- Does it work the other way, from Wisconsin to Colorado?
- Not necessarily. Reciprocity is directed. Going from Wisconsin to Colorado, the mechanism is not applicable.
Sources
- City of Milwaukee Department of Neighborhood Services - Contractors: credentials required before permit issuance · Milwaukee Code of Ordinances 95-14 · City of Milwaukee Department of Neighborhood Services · Other · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors - participating state agencies · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- Wisconsin DSPS - Approved Dwelling Contractor Qualifier Initial Qualifier Courses (provider list) · Wisconsin Department of Safety and Professional Services · Other · verified September 17, 2026
- Wisconsin DSPS - Dwelling Contractor · Wis. Admin. Code SPS 305.31; Wis. Stat. 101.654(1)(b), (1)(c)2. · Wisconsin Department of Safety and Professional Services · Agency Page · verified September 17, 2026
- Wisconsin DSPS - Dwelling Contractor Qualifier · Wis. Admin. Code SPS 305.31, SPS 305.315; Wis. Stat. 101.654 · Wisconsin Department of Safety and Professional Services · Agency Page · verified September 17, 2026
- Wisconsin DSPS - Dwelling Contractor Restricted · Wis. Admin. Code SPS 305.31; Wis. Stat. 101.654(2m) · Wisconsin Department of Safety and Professional Services · Agency Page · verified September 17, 2026
- Wisconsin DSPS Form 3096 - Dwelling Contractor Application Information · Wisconsin Department of Safety and Professional Services · Form · verified September 17, 2026
- Wisconsin DSPS Form 3097 - Dwelling Contractor Qualifier Application Information · Wisconsin Department of Safety and Professional Services · Form · verified September 17, 2026
- Wisconsin DSPS - Trades Renewal Dates and Fees · Wisconsin Department of Safety and Professional Services · Other · verified September 17, 2026
- Wis. Admin. Code SPS 305.31 Dwelling contractor and SPS 305.315 Dwelling contractor qualifier · Wis. Admin. Code SPS 305.31, SPS 305.315 · Wisconsin Legislature · Admin Rule · verified September 17, 2026
- Wis. Admin. Code ch. SPS 305 - Licenses, Certifications and Registrations (Table 305.02 fees, Table 305.06 terms, SPS 305.47) · Wis. Admin. Code SPS 305.02 Table 305.02; SPS 305.06 Table 305.06; SPS 305.47 · Wisconsin Legislature · Admin Rule · verified September 17, 2026
- Wis. Stat. 101.654 - Contractor certification; education · Wis. Stat. 101.654 · Wisconsin Legislature · Statute · verified September 17, 2026
- Wis. Stat. 440.01 - Definitions (scope of "credential" for the ch. 440 reciprocal-credential provisions) · Wis. Stat. 440.01(2)(a); cf. Wis. Stat. 440.09 · Wisconsin Legislature · Statute · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.