LicensebyState

Illinois to Hawaii: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 15 sources

Illinois does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Hawaii's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state experience credited toward the four years, full Hawaii examination (every state)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

The Board answers the question directly in its own FAQ: Hawaii has no reciprocity agreements with other states, and all applicants meet the same licensing and examination requirements. There is no verification-of-licensure form, no examination waiver and no NASCLA route, and a license held elsewhere is never exchanged for a Hawaii one. What an out-of-state builder does carry across is the work behind the license. The qualifying person must show four full years of supervisory experience within the past ten years in the classification applied for, and years spent supervising under another state's license count in full: the Board asks for proof of licensure, and an out-of-state contractor who held a license in that state is one of the people who may sign an experience certificate. The paperwork is the same for everyone. At least three notarized experience certificates, at least one for each classification and no two in a classification from the same person, plus a Chronological History of Projects listing every job, the trades subcontracted and the actual on-site supervision time. The Board reviews complete applications at its monthly meeting, then approves the applicant to sit the Hawaii examinations, which must be passed within six months.

Both examination parts are taken for the Class B general building classification: part I on Hawaii building, safety, health, labor and lien law and the administrative principles of contracting, part II on trade knowledge in the classification. Seventy-five percent is the pass mark for each part. The Board's examination page says the examinations moved to PSI Services LLC in January 2023, while the October 2025 requirement sheets still name Prometric; the examination approval letter names the testing agency, the examinations the applicant is eligible for and the date they must be passed by. HAR 16-77-41 excuses an examination only where the applicant previously qualified by written examination within four years and is applying in the same classification, which is about a lapsed Hawaii credential rather than an out-of-state one. Applying for the Class B license at the same time as a Class C specialty license needs a separate part II examination and a separate project list for each classification.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • Four full years of supervisory experience within the ten years immediately before the application, in the classification applied for, at the level of journeyman, foreman, supervisor or contractor, counting only time actually spent on site supervising and directing employees.HRS 444-11(a)(2) lets the Board accept experience acquired on a self-employed or unlicensed basis where it can be verified. Technical training may be approved as acceptable experience but never counts for more than one year. Design time, ordering materials and scheduling around rain-outs or deliveries do not count.
  • Supervisory years worked under another state's contractor license count toward the four years. The Board asks an applicant with licensed experience elsewhere to provide proof of licensure, and an out-of-state contractor who held a license in that state may sign an experience certificate. The proof of licensure does not replace the certificates or the project list.
  • You must have no disciplinary action or unresolved complaints on your record.
  • The qualifying person must be at least eighteen and, unless applying as a sole proprietor, must be employed by the licensed contracting entity as its Responsible Managing Employee. The principal RME must be in residence in Hawaii while the entity's license is in effect or a project is under construction, and a licensee must keep a physical place of business in the State; a post office box is not accepted.

What you'll do to get licensed in Hawaii

  1. 1Law / code exam. Pass a law, rules, or code exam. Part I of the contractor examination: the building, safety, health, labor and lien laws of Hawaii and the basic administrative principles of the contracting business. Seventy-five percent is needed to pass. It is never waived for an out-of-state applicant. The Board strongly recommends obtaining a copy of the contractor licensing law and rules before sitting it..
  2. 2Trade exam. Pass the destination's trade exam. Part II of the contractor examination: trade knowledge in the classification requested, here Class B general building. Seventy-five percent is needed to pass. The applicant registers with the testing agency only after the Board approves the application and issues an examination approval letter, and must pass both parts within six months or file a new application and fee. A failed part may be retaken for a further fee inside that six-month window..
  3. 3Application fee. Pay the application fee ($50). $50 nonrefundable application fee for each application filed, payable to Commerce and Consumer Affairs. More than one classification may be requested on a single application, but a contracting entity and its Responsible Managing Employee file separate applications and pay the fee separately, so an inbound company and its qualifying person pay $50 each. A further $10 contractors education fund fee accompanies every application, and a dishonored payment carries a $25 service charge..
  4. 4Exam fee. Pay the exam fee. Examination fees are paid directly to the testing agency when the approved applicant registers, and are charged for each part taken. The Board's published FAQ lists $75 per part, with most classifications taking both parts, but that document dates from before the examinations moved to PSI Services LLC, so confirm the current amount with PSI on (833) 333-4754 before registering. An interpreter, if the Board approves one, adds $100 to the examination fee..
  5. 5License fee. Pay the license or certificate fee. The Board assesses the license fee after the application is approved and the examinations are passed, telling the applicant the exact amount at that point. Its published FAQ gives $663 for a contracting entity or sole proprietor licensed in the first year of the two-year cycle and $494 in the second, and $438 or $334 on the same split for a Responsible Managing Employee, so budget for both. Licenses run to September 30 of the next even-numbered year whatever date they were issued. On-time renewal currently costs $338 for an entity or sole proprietor, $208 for an RME and $160 for an inactive license, plus $5 education fund and $10 recovery fund fees..
  6. 6Financial responsibility. Show financial responsibility. A current financial statement, dated within one year, that is compiled, reviewed or audited and accompanied by an independent accountant's report from a CPA or public accountant holding a current permit to practice; an accountant licensed in another state attaches a copy of that license. For compiled and reviewed statements the applicant also signs the Board's own Financial Statement form CT-02 whether or not the accountant used it. The Board publishes no minimum net worth or working capital figure: it weighs the statement together with the credit reports and the tax clearance to decide whether the applicant has financial integrity, and whether to impose a bond. RMEs do not file a financial statement; the entity or sole proprietor does..
  7. 7Surety bond. Post a surety bond (if applicable). A surety bond is not automatic in Hawaii. The Board may require one as proof of financial integrity, and sets the amount case by case; the bond form leaves the penal sum blank. Where one is imposed, it runs to the State of Hawaii on form CT-09, is conditioned on compliance with HRS chapter 444 and on paying employees' wages, is continuous, and can be canceled by the surety only on thirty days' written notice. Both the applicant and the surety notarize it. After a licensee has maintained the bond for at least a year it may ask the Board to waive it on proof of financial integrity, supported by current credit reports, financial statements and a tax clearance..
  8. 8Insurance. Carry the required insurance. A certificate of comprehensive liability and property damage insurance with minimum limits of $100,000 bodily injury each person, $300,000 bodily injury each occurrence and $50,000 property damage each occurrence, plus a workers' compensation certificate from a carrier authorized in Hawaii or proof of self-insurance or exclusion. An out-of-state contractor may use a non-admitted carrier where the producer qualifies for an exemption under HRS 431:9A-104(b)(6). Coverage must be continuous for the life of the license: a lapse forfeits both the entity and the RME license automatically, and if it is not restored within sixty days both must apply as new applicants. Certificates are filed fastest through the Board's online insurance submittal system..
  9. 9Business license. Obtain a business license. The contracting entity must be registered with the DCCA Business Registration Division before it can be licensed: a Hawaii corporation or LLC files a stamped copy of its articles, a foreign corporation its certificate of authority and a partnership its registration statement, and an entity registered for more than a year attaches a Certificate of Good Standing issued within the past year. Any trade name must be separately registered and a filed-stamped copy supplied. A current Hawaii tax clearance, issued within six months, is filed with the application and again at every renewal, and the name on it must match the license name exactly..
  10. 10Background check. Complete a background check. A current and complete credit report for each officer, partner, manager or member, issued not more than six months earlier and covering at least the previous five years, showing each current and past debt, its status and any public records; a summary or a bare credit score is not accepted. Where a partner or member is itself a business, the credit reports of its officers or a comprehensive business credit report are filed instead. The RME files a credit report with the RME application as well..
  11. 11Continuing education. Complete continuing education (if applicable). Hawaii imposes no continuing education requirement on contractors. Renewal by September 30 of each even-numbered year instead turns on continued financial integrity: a current tax clearance or payment arrangement, a statement about any liens, undisputed debts or judgments, proof that workers' compensation and liability coverage have been maintained without a break, and proof that any bond the Board imposed is current..
  12. 12Other. The application, fee and every supporting document must reach the Board's Honolulu office on or before the first Tuesday of the month before the meeting at which it will be considered; the Board meets monthly except in December, and faxed or emailed copies are not accepted. An application is abandoned if licensure is not completed within a year of filing or the examinations are not passed after eligibility, and the Board keeps a denied application for two years. A Social Security number must be given or the application is treated as deficient..

Published fees on this path total $50, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam
  • Trade exam
  • Exam fee

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · if applicable

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education · if applicable

How Hawaii licenses residential contractors

Hawaii residential contractor · “Class B General Building Contractor (no separate residential class)

Statewide license

Verified September 17, 2026· 9 sources

Issued by Hawaii Contractors License Board (DCCA Professional and Vocational Licensing Division)

Hawaii has no residential contractor license. The Contractors License Board, in the Department of Commerce and Consumer Affairs, classifies every contractor into exactly three branches under HRS 444-7: Class A general engineering, Class B general building and Class C specialty. Houses fall inside Class B, which covers any structure built for the support, shelter and enclosure of persons or property whose construction uses more than two unrelated building trades, so a homebuilder in Hawaii holds the same license as a commercial builder and this page points at Class B for both levels. Two limits are worth knowing. A Class B license does not let the holder take a contract that needs only one or two unrelated trades unless the holder also carries the matching Class C specialty license, and it never covers electrical or plumbing work, which needs both the C-13 or C-37 classification and an individually licensed electrician or plumber. The license is entity-held and qualified by a named person: a corporation, partnership, joint venture, LLC or LLP is licensed only while it employs a licensed Responsible Managing Employee, the RME sits the examinations and proves the experience, and the two file separate applications and pay separate fees. An individual who will trade in their own name applies instead as a licensed sole proprietor.

Moving to HawaiiLeaving Hawaii

Why Illinois has nothing to transfer

Illinois residential contractor · “No statewide license; local titles include Chicago General Contractor Class D or E and Chicago Home Repair

Licensed by cities and counties

Verified September 17, 2026· 19 sources

Illinois issues no statewide residential contractor, home builder or remodeler license, and no state agency examines or qualifies people who build or remodel houses. What the State does license is narrower and worth knowing: the Department of Financial and Professional Regulation licenses roofing contractors under the Illinois Roofing Industry Licensing Act, where a limited license covers residential properties of eight units or less and an unlimited license covers residential, commercial and industrial roofs, and a municipality or county may not issue a building permit to a roofing contractor without proof of that state license. IDFPR also licenses architects, professional and structural engineers, land surveyors and alarm contractors, and the Department of Public Health licenses plumbers, plumbing contractors and irrigation contractors, but nowhere on IDFPR's list of regulated professions is there a general, residential or building contractor. Everything else is local: Illinois municipalities are home rule units and license or register residential contractors one jurisdiction at a time, with the City of Chicago's General Contractor license by far the most consequential. A builder moving to Illinois therefore has no state license to transfer and no reciprocity to apply for; the practical work is registering in each city or county where they will pull permits, carrying the insurance each one demands, and obtaining the state roofing license if the company will do roofing. Statewide consumer law still applies: the Home Repair and Remodeling Act requires a written contract for any home repair or remodeling job over $1,000 and the "Home Repair: Know Your Consumer Rights" pamphlet on every job.

How local licensing works in Illinois

How it works in Illinois. There is no state license, no state application and no state exam for residential contractors. Each municipality decides who may pull a residential building permit, so a contractor must be licensed or registered separately in every jurisdiction where they build, and a credential from one Illinois city is not valid in the next. Almost all of these local programs are about identity, insurance, bonding and fees rather than trade competence, and none of them reviews or credits a residential contractor license held in another state. Roofing is the exception in the other direction: the State license is mandatory everywhere in Illinois, and cities from Rockford to Joliet to Cook County check it at the permit counter.

Chicago. This is the license that matters. 'A City of Chicago general contractor license is required to perform most types of building construction, alteration, repair, and demolition work within the City of Chicago', and it is needed to bid on, undertake, hire or supervise, or control the means and methods of work requiring a building, sign or demolition permit. Licenses are issued to businesses, including sole proprietorships, in five classes set by project value - the fair market value of materials and labor supplied by all contractors and subcontractors across all concurrent and consecutive work at the same site. The two classes a homebuilder or remodeler usually needs are Class D, capped at $4 million with ordinary demolition and $2 million per occurrence of insurance, at a $900.00 license and renewal fee, and Class E, capped at $500,000 with no demolition and $1 million per occurrence, at $300.00. There is no exam, no experience review and no qualifying party. The application asks for a statement of financial solvency in the format supplied, proof of authority to do business in Illinois (not required for sole proprietors), an Assumed Name Certificate from the County Clerk if a trade name is used, proof of insurance for the class from an insurer authorized in Illinois and rated B+ or better by A.M. Best, and government photo identification for the controlling persons. Continental Testing Services processes the application and renewal by mail for the Department of Buildings; the license runs one year and 'is automatically inactivated if the associated insurance policy expires.' Reinstatement costs $100.00 per year or part year expired.

Chicago, work that does not need a permit. A business that fixes, replaces, alters, modernizes, improves or adds to residential property but does not need a building permit takes a Home Repair license from Business Affairs and Consumer Protection instead: $1,000.00 for a two-year term, with a certificate of insurance of at least $300,000 per occurrence, and the rule that 'Home Repair licensees may not pull building permits.' A general contractor license replaces it - 'a home repair license is not required for a business that holds a General Contractor license', though a general contractor doing residential work must still follow the home repair consumer protection rules, which include a written estimate before work, a written invoice on completion, prior approval before exceeding the estimate, and the license number on contracts, advertisements and vehicles. Acquiring vacant land to build a new home, or renovating more than half of an existing building's floor area, requires a separate Residential Real Estate Developer license.

Cook County (unincorporated areas). 'All contractors performing work in unincorporated Cook County are required to register with the Cook County Department of Building and Zoning.' Registration costs $150 per trade initially and $75 per trade annually, due by December 31, and needs a $1,000,000 general liability certificate naming Cook County Building and Zoning at 69 W. Washington, Suite 2830, Chicago as certificate holder, filed by the owner or a corporate officer with the Articles of Incorporation or the current Annual Domestic Report. Roofing registrants must submit the State of Illinois roofing license and demolition registrants an approved bond. There is no exam. Homeowners who live on the property get 'General' contractor registration free of charge. Use the county's CookViewer tool first to check whether a site is actually unincorporated. Contact [email protected] or 312-603-0512.

Aurora. The Division of Building and Permits registers a General contractor for a $200 fee. The packet is the Contractor Licensing Application, a certificate of insurance naming the City of Aurora as primary and non-contributory additional insured with $1,000,000 general aggregate and $500,000 per occurrence, workers' compensation in compliance with Illinois statute, and proof the business is registered with the Secretary of State or a county DBA certificate. There is no test for the General category - Aurora's municipal testing applies only to electrical and mechanical contractors, who may use ICC certifications or a license from an accepted testing municipality instead. Roofing registration is also $200 and requires the state license, and workers' compensation cannot be replaced by an employee affidavit for roofers. Outstanding or expired permits will block a renewal. Submit to [email protected]; 77 S Broadway, (630) 256-3130.

Evanston. 'All contractors performing work within City limits are required to register with the City, including but not limited to General Contractors, Electrical, Carpentry, Concrete, Excavation, Masonry, Landscaping, Fence, Roofing and Sign contractors.' General Contractor registration is $150 and trade registration $125, both renewable annually through the Citizen Portal. Insurance must be general liability of at least $300,000 per occurrence, bodily injury of at least $100,000 per occurrence, property damage of at least $100,000 per occurrence and workers' compensation at statutory minimums, with Evanston as certificate holder; sole proprietors and partnerships with no employees may file an affidavit in place of workers' compensation, and right-of-way work needs $1,000,000 per occurrence naming the city as additional insured. State-regulated contractors submit a copy of the state license. An owner-occupant of a single-unit residence may act as their own general contractor.

Joliet. 'All contractors performing work within the City of Joliet must have current registration on file prior to permit issuance. There are no forms or fees for registration, unless you are a Sign Erector or for HVAC Testing.' Registration is a certificate of insurance naming the City of Joliet as certificate holder, with minimum limits of $250,000 bodily injury per person, $500,000 bodily injury per occurrence and $250,000 property damage per occurrence, emailed to [email protected]. Roofing needs the Illinois State Roofer's License, plumbing the Illinois Plumbing Contractor Registration, irrigation the state irrigation license, siding a Vinyl Siding Installers certificate, and electrical and HVAC a license from one of the municipalities Joliet accepts. Electrical, plumbing and HVAC contractors also file a project-specific Letter of Intent, and all subcontractors must be listed on the permit application.

Rockford. 'General contractors are not required to be licensed.' Rockford requires a building permit for any structure over 120 square feet that is constructed, altered, enlarged, repaired or moved, and for all roofing work, and notes that 'roofing contractors are required to obtain a license from the State of Illinois Department of Professional Regulation.' Tent erectors and outdoor sign contractors need annual city licenses.

Springfield. The Building and Zoning Department's published list of applications contains electrical and mechanical contractor registrations and licenses and nothing else for contractors - there is no general contractor or home improvement registration. The city's building permit application collects the general contractor's name and address but asks for a license number only on the roofing line. Building and Zoning is at 300 South 7th Street, Room 304, (217) 789-2171.

Peoria. Peoria's Contractor Business Licenses cover only four activities - parking lot paving, sidewalk and driveway work, placing a dumpster or storage unit in the right-of-way, and sewer connections - at $25.00 or $60.00 a year with license and permit bonds of $5,000 or $10,000. Its trade licenses cover electrical and HVAC contractors at $150.00 each, issued to individuals rather than businesses and requiring an open-book ICC exam unless the applicant holds a Normal or Pekin license, plus boiler tender and stationary engineer licenses. There is no general building contractor or residential builder license in Peoria.

Everywhere else. Other Illinois municipalities set their own rules and most of them register rather than license residential builders. Ask the building or development services department of each city, village or county before contracting there, and confirm the current fee and insurance limits before buying coverage, because these are set locally and change independently.

Moving to IllinoisLeaving Illinois

Common questions

Do I have to take the Hawaii residential contractor exam if I'm licensed in Illinois?
Yes. Hawaii requires the trade exam on this path, plus a law or code exam.
What does it cost to get a Hawaii residential contractor license from Illinois?
Published fees on this path total $50, not counting exam vendor fees or bonds.
Do my Illinois work hours count in Hawaii?
Yes. Documented out-of-state experience counts toward Hawaii's eligibility requirements.
Does it work the other way, from Hawaii to Illinois?
Not necessarily. Reciprocity is directed. Going from Hawaii to Illinois, the mechanism is not applicable.

Sources

  1. Contractors License Board Application Forms and Publications - DCCA Hawaii · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
  2. Contractors License Board - Hawaii Department of Commerce and Consumer Affairs · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
  3. Bond Form - Contractors License (form CT-09, rev. 09/2013) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  4. Description of Contractor License Classifications - Hawaii Contractors License Board · Hawaii DCCA, Contractors License Board · Other · verified September 17, 2026
  5. Contractors License Board Examination - Application Deadline and Examination Dates · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
  6. Contractor Frequently Asked Questions - Hawaii Contractors License Board · Hawaii DCCA, Professional and Vocational Licensing Division · Faq · verified September 17, 2026
  7. Contractors Financial Statement (prescribed form CT-02, rev. 11/2017) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  8. Requirements for License - Contractor, Entity (Form CT-00, rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  9. Requirements for License - Contractor, Responsible Managing Employee (Form CT-00(A), rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  10. Requirements for License - Contractor, Sole Proprietor (rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  11. Hawaii Administrative Rules Title 16, Chapter 77 - Contractors · HAR 16-77-6, 16-77-8, 16-77-11, 16-77-12, 16-77-28, 16-77-32, 16-77-33, 16-77-35, 16-77-39 to 16-77-46, 16-77-54, 16-77-55, 16-77-71, 16-77-76, 16-77-89 · Hawaii DCCA, Contractors License Board · Admin Rule · verified September 17, 2026
  12. HRS 444-11 - No license issued when (contractor qualifications) · HRS 444-11 · Hawaii State Legislature · Statute · verified September 17, 2026
  13. HRS 444-7 - Classification (contractors) · HRS 444-7 · Hawaii State Legislature · Statute · verified September 17, 2026
  14. HRS 444-9 - Licenses required (contractors) · HRS 444-9 · Hawaii State Legislature · Statute · verified September 17, 2026
  15. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related