LicensebyState

Illinois to Iowa: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 10 sources

Illinois does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Iowa's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Everyone registers the same way; an out-of-state contractor license transfers nothing

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

A residential contractor licensed in another state registers in Iowa exactly as a first-time applicant does, and holding that license neither helps nor hinders the application. DIAL does not review, verify or credit out-of-state credentials for contractor registration, and it has nothing to waive: Iowa's contractor registration law and its rules impose no examination, no experience requirement and no competency test, and neither the statute, the rules nor the application asks about another state's license. Iowa also does not participate in the NASCLA Accredited Examination program, because it holds no contractor examination for that examination to replace. Coming from out of state changes only one thing, and it costs money rather than saving it: a contractor whose principal place of business is in another state must file a continuous $25,000 surety bond on DIAL's own bond form, issued by a surety licensed in Iowa, or show that the Iowa Department of Transportation has prequalified the business to bid on its projects. Opening a branch office in Iowa does not avoid the bond, and subcontractors are not covered by the general contractor's registration or bond - each files its own. The rest of the route is the same for everyone: obtain an Iowa unemployment insurance employer account number, file the workers' compensation certificate naming DIAL as certificate holder or a statement that coverage is not required, complete the application online or on paper, and pay $50 for one year or $150 for three.

The 30-day figure is the rule's own deadline: 481 IAC 465.7 gives the director 30 days from receipt of a completed application to issue the number, and the department's own guidance repeats that processing can take up to 30 days and that a contractor 'is not registered until a contractor registration number is issued.' Registration numbers are the letter C followed by six digits and are published in DIAL's public contractor lookup. The seven factors in 481 IAC 465.2 decide whether a business counts as out-of-state for bonding: where the home office is shown on government filings, where payroll is prepared, where business is transacted, where the officers or owners live and work, where the bank accounts are, where fixed business property is, and where management decisions are made. Contractor Registration can be reached on 515.242.5871 or at [email protected], DIAL, 6200 Park Avenue, Suite 100, Des Moines, IA 50321.

At a glance

Trade exam
Waived
Law / code exam
Not required
Out-of-state hours
Do not count
Typical processing
About 30 days

What you must already have

  • Registration is required of anyone who earns at least $2,000 a year from construction work in Iowa. A person who earns less than that, or who works only on their own real estate or property, is not a contractor under the law and does not register.Iowa Code 91C.1(1)(a) and 481 IAC 465.1. The definition of construction is adopted from 871 IAC 23.82(96) and is deliberately wide: it covers single-family housing construction, building alterations, land subdivision and development, remodeling, demolition and every special trade, and the department describes it as more than 400 categories.
  • Each construction business with its own federal identification number registers separately, a joint venture registers as an independent entity, and subcontractors are not covered by the general contractor's registration. Changing business form, for example from a sole proprietorship to a corporation, requires a new registration rather than an amendment.481 IAC 465.3, 465.4 and 465.5(3). Any other change in the information on file must be reported to DIAL within 15 working days, and changes to workers' compensation coverage within ten days before the change takes effect.
  • Iowa asks for no trade experience, apprenticeship hours, education, references or examination result, so documented years of homebuilding in another state neither shorten nor replace any step of registration.The complete application is listed at 481 IAC 465.4 and the complete conditions of registration at Iowa Code 91C.2. Neither includes a qualification of any kind.

What you'll do to get licensed in Iowa

  1. 1Application fee. Pay the application fee ($50). Contractor registration fee: $50 per year, or $150 for a three-year registration. The fee is not refundable. A self-employed contractor who does not pay more than $2,000 a year to employ other people and does not work with or for other contractors in the same phase of construction is exempt from the fee and files a fee exemption form instead, but still registers and must file a new exemption form at each renewal. Registration is renewed every year; DIAL sends a renewal form by mail or email the month before expiry, and a contractor who renews on time keeps the same registration number. Credit card and ACH payments are not accepted over the phone..
  2. 2Surety bond. Post a surety bond ($25,000). Out-of-state contractor bond: a $25,000 surety bond, on DIAL's own bond form, from a surety company licensed to do business in Iowa, required of every contractor whose principal place of business is in another state. Keeping a branch office in Iowa does not avoid it, and subcontractors must post their own. The bond runs to the State of Iowa, is continuous until the surety cancels it on at least 30 days' written notice, and runs concurrently with the annual registration term. It guarantees payment of taxes, unemployment compensation contributions, penalties, interest and related fees owed to the state, and only the State of Iowa and its agencies may claim against it. In place of the bond, a contractor may file a letter showing that the Iowa Department of Transportation has prequalified it to bid on department projects. When work in Iowa ends, the surety asks DIAL in writing to release the bond..
  3. 3Insurance. Carry the required insurance. Workers' compensation: a certificate of insurance from the carrier showing coverage and its effective dates and naming the Department of Inspections, Appeals, and Licensing as certificate holder. A self-insured employer files the commissioner of insurance's release under Iowa Code 87.11 instead, and a contractor with no employees files a statement that it is not required to carry coverage. The insurer must notify DIAL when a policy is cancelled, and the contractor must notify DIAL ten days before any change in coverage. Losing coverage is grounds for revoking the registration..
  4. 4Business license. Obtain a business license. An Iowa unemployment insurance employer account number issued by the unemployment insurance services division of Iowa Workforce Development, obtained before applying. Every contractor needs one, in state or out of state, even with no employees. The application also requires a federal employer identification number for a business entity, or the owner's Social Security number for a sole proprietor, and the business's NAICS code or a description of its principal products and services..
  5. 5Other. The registration application itself, filed online through DIAL's contractor registration portal or on the department's paper form, giving the business name, the mailing address of the principal place of business, the business telephone number, the type of entity, and the name, address, telephone number and position of every corporate officer or of each owner. DIAL issues a registration number within 30 days of a complete application, and no construction work may be performed in Iowa before the number is issued..
  6. 6Other. Separate trade licensing where the work calls for it. Contractor registration does not authorize plumbing, mechanical, HVAC, refrigeration, sheet metal or hydronic work: those require a contractor license from the Iowa Plumbing and Mechanical Systems Board under Iowa Code chapter 105, applied for on a joint application that produces both the license and the contractor registration number, so a licensed plumbing or mechanical business does not file a separate registration application. Electrical work requires a license from the Iowa Electrical Examining Board under chapter 103. Asbestos, lead-based paint, elevator, boiler and alarm and fire protection work each carry their own DIAL credential as well..
  7. 7Other. Local permits and any local requirements. A city or county building official may not issue a construction permit to a contractor who is required to hold a contractor registration number and does not have one, so the registration must be in hand before pulling permits. DIAL directs contractors to contact the city or county government for each project to find out what else that jurisdiction requires. Registration is also a precondition for being awarded a contract to perform work for the state or a state agency..

Published fees on this path total $50, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · $25,000

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

How Iowa licenses residential contractors

Iowa residential contractor · “Construction Contractor Registration

Statewide license

Verified September 17, 2026· 6 sources

Issued by Iowa Department of Inspections, Appeals, and Licensing (DIAL), Contractor Registration

Iowa does not license residential building contractors. It registers them, and the registration is the only statewide credential a homebuilder or remodeler needs: there is no trade examination, no business-and-law examination, no experience or apprenticeship requirement, no financial statement and no named qualifying party anywhere in Iowa Code chapter 91C or in 481 Iowa Administrative Code chapter 465. Registration is with the Department of Inspections, Appeals, and Licensing, which took the program over from Iowa Workforce Development in the 2023 state government reorganization. The duty is broad and the threshold is low: every individual and business performing construction work in Iowa must register if they earn at least $2,000 a year from construction, and only people who earn less than that, or who work solely on their own real estate, are outside the law. The same registration covers houses, apartments and commercial buildings alike, because Iowa draws no residential/commercial line and issues no classes, tiers or dollar limits - the definition of construction it borrows from the employment security rules expressly reaches single-family housing construction, building alterations, land subdivision and development, and general contractors of every kind. The registration belongs to the business rather than to a person, so a builder moving to Iowa registers the sole proprietorship, partnership, corporation or LLC that will sign contracts, and each business with its own federal identification number registers separately. What Iowa asks for instead of qualifications is tax and workers' compensation compliance: an Iowa unemployment insurance employer account number, proof of workers' compensation coverage or a statement that none is required, a $50 annual fee, and - for any contractor whose principal place of business is outside Iowa - a $25,000 surety bond. Iowa does hold real competency licenses in the trades, through the Electrical Examining Board under chapter 103 and the Plumbing and Mechanical Systems Board under chapter 105, and those are separate credentials with their own exams.

Moving to IowaLeaving Iowa

Why Illinois has nothing to transfer

Illinois residential contractor · “No statewide license; local titles include Chicago General Contractor Class D or E and Chicago Home Repair

Licensed by cities and counties

Verified September 17, 2026· 19 sources

Illinois issues no statewide residential contractor, home builder or remodeler license, and no state agency examines or qualifies people who build or remodel houses. What the State does license is narrower and worth knowing: the Department of Financial and Professional Regulation licenses roofing contractors under the Illinois Roofing Industry Licensing Act, where a limited license covers residential properties of eight units or less and an unlimited license covers residential, commercial and industrial roofs, and a municipality or county may not issue a building permit to a roofing contractor without proof of that state license. IDFPR also licenses architects, professional and structural engineers, land surveyors and alarm contractors, and the Department of Public Health licenses plumbers, plumbing contractors and irrigation contractors, but nowhere on IDFPR's list of regulated professions is there a general, residential or building contractor. Everything else is local: Illinois municipalities are home rule units and license or register residential contractors one jurisdiction at a time, with the City of Chicago's General Contractor license by far the most consequential. A builder moving to Illinois therefore has no state license to transfer and no reciprocity to apply for; the practical work is registering in each city or county where they will pull permits, carrying the insurance each one demands, and obtaining the state roofing license if the company will do roofing. Statewide consumer law still applies: the Home Repair and Remodeling Act requires a written contract for any home repair or remodeling job over $1,000 and the "Home Repair: Know Your Consumer Rights" pamphlet on every job.

How local licensing works in Illinois

How it works in Illinois. There is no state license, no state application and no state exam for residential contractors. Each municipality decides who may pull a residential building permit, so a contractor must be licensed or registered separately in every jurisdiction where they build, and a credential from one Illinois city is not valid in the next. Almost all of these local programs are about identity, insurance, bonding and fees rather than trade competence, and none of them reviews or credits a residential contractor license held in another state. Roofing is the exception in the other direction: the State license is mandatory everywhere in Illinois, and cities from Rockford to Joliet to Cook County check it at the permit counter.

Chicago. This is the license that matters. 'A City of Chicago general contractor license is required to perform most types of building construction, alteration, repair, and demolition work within the City of Chicago', and it is needed to bid on, undertake, hire or supervise, or control the means and methods of work requiring a building, sign or demolition permit. Licenses are issued to businesses, including sole proprietorships, in five classes set by project value - the fair market value of materials and labor supplied by all contractors and subcontractors across all concurrent and consecutive work at the same site. The two classes a homebuilder or remodeler usually needs are Class D, capped at $4 million with ordinary demolition and $2 million per occurrence of insurance, at a $900.00 license and renewal fee, and Class E, capped at $500,000 with no demolition and $1 million per occurrence, at $300.00. There is no exam, no experience review and no qualifying party. The application asks for a statement of financial solvency in the format supplied, proof of authority to do business in Illinois (not required for sole proprietors), an Assumed Name Certificate from the County Clerk if a trade name is used, proof of insurance for the class from an insurer authorized in Illinois and rated B+ or better by A.M. Best, and government photo identification for the controlling persons. Continental Testing Services processes the application and renewal by mail for the Department of Buildings; the license runs one year and 'is automatically inactivated if the associated insurance policy expires.' Reinstatement costs $100.00 per year or part year expired.

Chicago, work that does not need a permit. A business that fixes, replaces, alters, modernizes, improves or adds to residential property but does not need a building permit takes a Home Repair license from Business Affairs and Consumer Protection instead: $1,000.00 for a two-year term, with a certificate of insurance of at least $300,000 per occurrence, and the rule that 'Home Repair licensees may not pull building permits.' A general contractor license replaces it - 'a home repair license is not required for a business that holds a General Contractor license', though a general contractor doing residential work must still follow the home repair consumer protection rules, which include a written estimate before work, a written invoice on completion, prior approval before exceeding the estimate, and the license number on contracts, advertisements and vehicles. Acquiring vacant land to build a new home, or renovating more than half of an existing building's floor area, requires a separate Residential Real Estate Developer license.

Cook County (unincorporated areas). 'All contractors performing work in unincorporated Cook County are required to register with the Cook County Department of Building and Zoning.' Registration costs $150 per trade initially and $75 per trade annually, due by December 31, and needs a $1,000,000 general liability certificate naming Cook County Building and Zoning at 69 W. Washington, Suite 2830, Chicago as certificate holder, filed by the owner or a corporate officer with the Articles of Incorporation or the current Annual Domestic Report. Roofing registrants must submit the State of Illinois roofing license and demolition registrants an approved bond. There is no exam. Homeowners who live on the property get 'General' contractor registration free of charge. Use the county's CookViewer tool first to check whether a site is actually unincorporated. Contact [email protected] or 312-603-0512.

Aurora. The Division of Building and Permits registers a General contractor for a $200 fee. The packet is the Contractor Licensing Application, a certificate of insurance naming the City of Aurora as primary and non-contributory additional insured with $1,000,000 general aggregate and $500,000 per occurrence, workers' compensation in compliance with Illinois statute, and proof the business is registered with the Secretary of State or a county DBA certificate. There is no test for the General category - Aurora's municipal testing applies only to electrical and mechanical contractors, who may use ICC certifications or a license from an accepted testing municipality instead. Roofing registration is also $200 and requires the state license, and workers' compensation cannot be replaced by an employee affidavit for roofers. Outstanding or expired permits will block a renewal. Submit to [email protected]; 77 S Broadway, (630) 256-3130.

Evanston. 'All contractors performing work within City limits are required to register with the City, including but not limited to General Contractors, Electrical, Carpentry, Concrete, Excavation, Masonry, Landscaping, Fence, Roofing and Sign contractors.' General Contractor registration is $150 and trade registration $125, both renewable annually through the Citizen Portal. Insurance must be general liability of at least $300,000 per occurrence, bodily injury of at least $100,000 per occurrence, property damage of at least $100,000 per occurrence and workers' compensation at statutory minimums, with Evanston as certificate holder; sole proprietors and partnerships with no employees may file an affidavit in place of workers' compensation, and right-of-way work needs $1,000,000 per occurrence naming the city as additional insured. State-regulated contractors submit a copy of the state license. An owner-occupant of a single-unit residence may act as their own general contractor.

Joliet. 'All contractors performing work within the City of Joliet must have current registration on file prior to permit issuance. There are no forms or fees for registration, unless you are a Sign Erector or for HVAC Testing.' Registration is a certificate of insurance naming the City of Joliet as certificate holder, with minimum limits of $250,000 bodily injury per person, $500,000 bodily injury per occurrence and $250,000 property damage per occurrence, emailed to [email protected]. Roofing needs the Illinois State Roofer's License, plumbing the Illinois Plumbing Contractor Registration, irrigation the state irrigation license, siding a Vinyl Siding Installers certificate, and electrical and HVAC a license from one of the municipalities Joliet accepts. Electrical, plumbing and HVAC contractors also file a project-specific Letter of Intent, and all subcontractors must be listed on the permit application.

Rockford. 'General contractors are not required to be licensed.' Rockford requires a building permit for any structure over 120 square feet that is constructed, altered, enlarged, repaired or moved, and for all roofing work, and notes that 'roofing contractors are required to obtain a license from the State of Illinois Department of Professional Regulation.' Tent erectors and outdoor sign contractors need annual city licenses.

Springfield. The Building and Zoning Department's published list of applications contains electrical and mechanical contractor registrations and licenses and nothing else for contractors - there is no general contractor or home improvement registration. The city's building permit application collects the general contractor's name and address but asks for a license number only on the roofing line. Building and Zoning is at 300 South 7th Street, Room 304, (217) 789-2171.

Peoria. Peoria's Contractor Business Licenses cover only four activities - parking lot paving, sidewalk and driveway work, placing a dumpster or storage unit in the right-of-way, and sewer connections - at $25.00 or $60.00 a year with license and permit bonds of $5,000 or $10,000. Its trade licenses cover electrical and HVAC contractors at $150.00 each, issued to individuals rather than businesses and requiring an open-book ICC exam unless the applicant holds a Normal or Pekin license, plus boiler tender and stationary engineer licenses. There is no general building contractor or residential builder license in Peoria.

Everywhere else. Other Illinois municipalities set their own rules and most of them register rather than license residential builders. Ask the building or development services department of each city, village or county before contracting there, and confirm the current fee and insurance limits before buying coverage, because these are set locally and change independently.

Moving to IllinoisLeaving Illinois

Common questions

Do I have to take the Iowa residential contractor exam if I'm licensed in Illinois?
No. The trade exam is waived on this path.
What does it cost to get a Iowa residential contractor license from Illinois?
Published fees on this path total $50, not counting exam vendor fees or bonds.
Do my Illinois work hours count in Iowa?
No. Iowa does not credit out-of-state hours on this path.
How long does the application take?
The board's published or typical processing time is about 30 days.
Does it work the other way, from Iowa to Illinois?
Not necessarily. Reciprocity is directed. Going from Iowa to Illinois, the mechanism is not applicable.

Sources

  1. Iowa Code 103A.20 - State building code; permits, duty to issue · Iowa Code 103A.20(1)(b) · Iowa Legislature · Statute · verified September 17, 2026
  2. Iowa Code chapter 91C - Construction Contractors (full chapter text) · Iowa Code ch. 91C · Iowa Legislature · Statute · verified September 17, 2026
  3. DIAL Contractor Registration - Out-of-State Contractor Bond Form · Iowa Code ch. 91C · Iowa Department of Inspections, Appeals, and Licensing · Form · verified September 17, 2026
  4. DIAL - Contractor Registration (who must register, fee, out-of-state bond, FAQ) · Iowa Code ch. 91C · Iowa Department of Inspections, Appeals, and Licensing · Agency Page · verified September 17, 2026
  5. DIAL - Electrical Licensing (Iowa Electrical Examining Board) · Iowa Code ch. 103 · Iowa Department of Inspections, Appeals, and Licensing · Agency Page · verified September 17, 2026
  6. Iowa Contractor Registration - checklist and frequently asked questions brochure · Iowa Code ch. 91C · Iowa Department of Inspections, Appeals, and Licensing (Division of Labor) · Faq · verified September 17, 2026
  7. 481 Iowa Administrative Code chapter 465 - Construction Contractor Registration · 481 IAC ch. 465 · Iowa Legislature / Iowa Department of Inspections, Appeals, and Licensing · Admin Rule · verified September 17, 2026
  8. 871 IAC 23.82(96) - Definition of construction employer (scope of "construction" for contractor registration) · 871 IAC 23.82(96) · Iowa Legislature / Iowa Workforce Development · Admin Rule · verified September 17, 2026
  9. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
  10. NASCLA Accredited Examination for Commercial General Building Contractors - participating state agencies · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related