Indiana to Hawaii: residential contractor license reciprocity
Indiana does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Hawaii's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Out-of-state experience credited toward the four years, full Hawaii examination (every state)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
The Board answers the question directly in its own FAQ: Hawaii has no reciprocity agreements with other states, and all applicants meet the same licensing and examination requirements. There is no verification-of-licensure form, no examination waiver and no NASCLA route, and a license held elsewhere is never exchanged for a Hawaii one. What an out-of-state builder does carry across is the work behind the license. The qualifying person must show four full years of supervisory experience within the past ten years in the classification applied for, and years spent supervising under another state's license count in full: the Board asks for proof of licensure, and an out-of-state contractor who held a license in that state is one of the people who may sign an experience certificate. The paperwork is the same for everyone. At least three notarized experience certificates, at least one for each classification and no two in a classification from the same person, plus a Chronological History of Projects listing every job, the trades subcontracted and the actual on-site supervision time. The Board reviews complete applications at its monthly meeting, then approves the applicant to sit the Hawaii examinations, which must be passed within six months.
Both examination parts are taken for the Class B general building classification: part I on Hawaii building, safety, health, labor and lien law and the administrative principles of contracting, part II on trade knowledge in the classification. Seventy-five percent is the pass mark for each part. The Board's examination page says the examinations moved to PSI Services LLC in January 2023, while the October 2025 requirement sheets still name Prometric; the examination approval letter names the testing agency, the examinations the applicant is eligible for and the date they must be passed by. HAR 16-77-41 excuses an examination only where the applicant previously qualified by written examination within four years and is applying in the same classification, which is about a lapsed Hawaii credential rather than an out-of-state one. Applying for the Class B license at the same time as a Class C specialty license needs a separate part II examination and a separate project list for each classification.
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- Four full years of supervisory experience within the ten years immediately before the application, in the classification applied for, at the level of journeyman, foreman, supervisor or contractor, counting only time actually spent on site supervising and directing employees.HRS 444-11(a)(2) lets the Board accept experience acquired on a self-employed or unlicensed basis where it can be verified. Technical training may be approved as acceptable experience but never counts for more than one year. Design time, ordering materials and scheduling around rain-outs or deliveries do not count.
- Supervisory years worked under another state's contractor license count toward the four years. The Board asks an applicant with licensed experience elsewhere to provide proof of licensure, and an out-of-state contractor who held a license in that state may sign an experience certificate. The proof of licensure does not replace the certificates or the project list.
- You must have no disciplinary action or unresolved complaints on your record.
- The qualifying person must be at least eighteen and, unless applying as a sole proprietor, must be employed by the licensed contracting entity as its Responsible Managing Employee. The principal RME must be in residence in Hawaii while the entity's license is in effect or a project is under construction, and a licensee must keep a physical place of business in the State; a post office box is not accepted.
What you'll do to get licensed in Hawaii
- 1Law / code exam. Pass a law, rules, or code exam. Part I of the contractor examination: the building, safety, health, labor and lien laws of Hawaii and the basic administrative principles of the contracting business. Seventy-five percent is needed to pass. It is never waived for an out-of-state applicant. The Board strongly recommends obtaining a copy of the contractor licensing law and rules before sitting it..
- 2Trade exam. Pass the destination's trade exam. Part II of the contractor examination: trade knowledge in the classification requested, here Class B general building. Seventy-five percent is needed to pass. The applicant registers with the testing agency only after the Board approves the application and issues an examination approval letter, and must pass both parts within six months or file a new application and fee. A failed part may be retaken for a further fee inside that six-month window..
- 3Application fee. Pay the application fee ($50). $50 nonrefundable application fee for each application filed, payable to Commerce and Consumer Affairs. More than one classification may be requested on a single application, but a contracting entity and its Responsible Managing Employee file separate applications and pay the fee separately, so an inbound company and its qualifying person pay $50 each. A further $10 contractors education fund fee accompanies every application, and a dishonored payment carries a $25 service charge..
- 4Exam fee. Pay the exam fee. Examination fees are paid directly to the testing agency when the approved applicant registers, and are charged for each part taken. The Board's published FAQ lists $75 per part, with most classifications taking both parts, but that document dates from before the examinations moved to PSI Services LLC, so confirm the current amount with PSI on (833) 333-4754 before registering. An interpreter, if the Board approves one, adds $100 to the examination fee..
- 5License fee. Pay the license or certificate fee. The Board assesses the license fee after the application is approved and the examinations are passed, telling the applicant the exact amount at that point. Its published FAQ gives $663 for a contracting entity or sole proprietor licensed in the first year of the two-year cycle and $494 in the second, and $438 or $334 on the same split for a Responsible Managing Employee, so budget for both. Licenses run to September 30 of the next even-numbered year whatever date they were issued. On-time renewal currently costs $338 for an entity or sole proprietor, $208 for an RME and $160 for an inactive license, plus $5 education fund and $10 recovery fund fees..
- 6Financial responsibility. Show financial responsibility. A current financial statement, dated within one year, that is compiled, reviewed or audited and accompanied by an independent accountant's report from a CPA or public accountant holding a current permit to practice; an accountant licensed in another state attaches a copy of that license. For compiled and reviewed statements the applicant also signs the Board's own Financial Statement form CT-02 whether or not the accountant used it. The Board publishes no minimum net worth or working capital figure: it weighs the statement together with the credit reports and the tax clearance to decide whether the applicant has financial integrity, and whether to impose a bond. RMEs do not file a financial statement; the entity or sole proprietor does..
- 7Surety bond. Post a surety bond (if applicable). A surety bond is not automatic in Hawaii. The Board may require one as proof of financial integrity, and sets the amount case by case; the bond form leaves the penal sum blank. Where one is imposed, it runs to the State of Hawaii on form CT-09, is conditioned on compliance with HRS chapter 444 and on paying employees' wages, is continuous, and can be canceled by the surety only on thirty days' written notice. Both the applicant and the surety notarize it. After a licensee has maintained the bond for at least a year it may ask the Board to waive it on proof of financial integrity, supported by current credit reports, financial statements and a tax clearance..
- 8Insurance. Carry the required insurance. A certificate of comprehensive liability and property damage insurance with minimum limits of $100,000 bodily injury each person, $300,000 bodily injury each occurrence and $50,000 property damage each occurrence, plus a workers' compensation certificate from a carrier authorized in Hawaii or proof of self-insurance or exclusion. An out-of-state contractor may use a non-admitted carrier where the producer qualifies for an exemption under HRS 431:9A-104(b)(6). Coverage must be continuous for the life of the license: a lapse forfeits both the entity and the RME license automatically, and if it is not restored within sixty days both must apply as new applicants. Certificates are filed fastest through the Board's online insurance submittal system..
- 9Business license. Obtain a business license. The contracting entity must be registered with the DCCA Business Registration Division before it can be licensed: a Hawaii corporation or LLC files a stamped copy of its articles, a foreign corporation its certificate of authority and a partnership its registration statement, and an entity registered for more than a year attaches a Certificate of Good Standing issued within the past year. Any trade name must be separately registered and a filed-stamped copy supplied. A current Hawaii tax clearance, issued within six months, is filed with the application and again at every renewal, and the name on it must match the license name exactly..
- 10Background check. Complete a background check. A current and complete credit report for each officer, partner, manager or member, issued not more than six months earlier and covering at least the previous five years, showing each current and past debt, its status and any public records; a summary or a bare credit score is not accepted. Where a partner or member is itself a business, the credit reports of its officers or a comprehensive business credit report are filed instead. The RME files a credit report with the RME application as well..
- 11Continuing education. Complete continuing education (if applicable). Hawaii imposes no continuing education requirement on contractors. Renewal by September 30 of each even-numbered year instead turns on continued financial integrity: a current tax clearance or payment arrangement, a statement about any liens, undisputed debts or judgments, proof that workers' compensation and liability coverage have been maintained without a break, and proof that any bond the Board imposed is current..
- 12Other. The application, fee and every supporting document must reach the Board's Honolulu office on or before the first Tuesday of the month before the meeting at which it will be considered; the Board meets monthly except in December, and faxed or emailed copies are not accepted. An application is abandoned if licensure is not completed within a year of filing or the examinations are not passed after eligibility, and the Board keeps a denied application for two years. A Social Security number must be given or the application is treated as deficient..
Published fees on this path total $50, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
- Trade exam
- Exam fee
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · if applicable
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education · if applicable
How Hawaii licenses residential contractors
Hawaii residential contractor · “Class B General Building Contractor (no separate residential class)”
Statewide license
Issued by Hawaii Contractors License Board (DCCA Professional and Vocational Licensing Division)
Hawaii has no residential contractor license. The Contractors License Board, in the Department of Commerce and Consumer Affairs, classifies every contractor into exactly three branches under HRS 444-7: Class A general engineering, Class B general building and Class C specialty. Houses fall inside Class B, which covers any structure built for the support, shelter and enclosure of persons or property whose construction uses more than two unrelated building trades, so a homebuilder in Hawaii holds the same license as a commercial builder and this page points at Class B for both levels. Two limits are worth knowing. A Class B license does not let the holder take a contract that needs only one or two unrelated trades unless the holder also carries the matching Class C specialty license, and it never covers electrical or plumbing work, which needs both the C-13 or C-37 classification and an individually licensed electrician or plumber. The license is entity-held and qualified by a named person: a corporation, partnership, joint venture, LLC or LLP is licensed only while it employs a licensed Responsible Managing Employee, the RME sits the examinations and proves the experience, and the two file separate applications and pay separate fees. An individual who will trade in their own name applies instead as a licensed sole proprietor.
Why Indiana has nothing to transfer
Indiana residential contractor · “Residential Contractor / Residential General Contractor / Home Improvement Contractor (city- or county-issued)”
Licensed by cities and counties
Issued by No state authority; cities and counties license, register or exempt residential contractors
Indiana issues no statewide residential contractor, home builder or remodeler license. The Indiana Professional Licensing Agency's list of state-licensed professions covers plumbing, home inspectors, manufactured home installers, architects and surveyors and contains no residential or general building contractor credential, and the Indiana Department of Homeland Security's Division of Fire and Building Safety enforces the state building code and inspects boilers, elevators and fire safety devices without licensing builders. What Indiana licenses at state level is plumbing, through the Indiana Plumbing Commission at the PLA, plus manufactured home installation and home inspection; electricians and HVAC technicians are licensed by cities and counties too, so a builder who self-performs those trades still qualifies locally. Homebuilding is governed jurisdiction by jurisdiction, and the range is wide: Fort Wayne and Allen County, Evansville and Hammond each run a written competency examination for a residential builder, Indianapolis and South Bend require a bonded and insured company license or registration with no exam, and the Monroe County sign-up that covers Bloomington is voluntary and free. The Indiana Attorney General's own consumer fact sheet says that "licensing requirements vary from community to community" and tells homeowners to check with the city or county building department. A residential contractor moving to Indiana therefore has no state license to transfer and no reciprocity to apply for; the work is qualifying separately in each place where permits will be pulled, and state law separately requires any home improvement contract over $150 to be in writing.
How local licensing works in Indiana
How it works in Indiana. There is no state contractor board, no state application and no state exam, so each city or county writes its own contractor ordinance under the state building code. A residential builder must hold whatever credential the jurisdiction issues in every place where they pull permits, and a license from one Indiana jurisdiction does not carry into the next. The credentials fall into two very different kinds. In Fort Wayne and Allen County, Evansville and Hammond a person sits a written examination and is approved by a licensing board; in Indianapolis and South Bend the license is a business filing backed by a surety bond and insurance with no test at all; and in Monroe County, which covers Bloomington, signing up as a general contractor is optional. Nothing an arriving contractor holds from another state waives any of it, and none of the jurisdictions below publishes a route that converts an out-of-state residential builder license into a local one.
Indianapolis and Marion County. The Department of Business and Neighborhood Services issues a single General Contractor license that covers houses as well as commercial work; the same application form carries checkboxes for Electrical, General, HVAC, Plumbing and Wrecking. The packet is proof of business registration (Indiana Secretary of State, or a county DBA filing for a sole proprietor or partnership), a certificate of insurance naming the Consolidated City of Indianapolis and Marion County as certificate holder and additional insured with general liability of at least $500,000 for each occurrence of death or bodily injury and $100,000 for each occurrence of property damage, or $500,000 per occurrence combined, worker's compensation coverage or a Worker's Compensation Board exemption waiver, and a typed $10,000 license or permit surety bond naming "Consolidated City of Indianapolis and/or an Unknown Third Party" as obligee. Licenses expire on December 31 of even-numbered years and renew every two years; the new-license fee is prorated across the term ($247.00, $185.00 and $124.00 at the three stages published in the current packet) and renewal is $247.00. Up to five authorized agents may be listed free, with $63.00 for each additional agent, and every new license listing must attend an orientation class within 60 days of issuance. There is no examination, experience or qualifying-individual requirement on the General type. Contractor Licensing, 200 E. Washington St., Suite 107, (317) 327-1291, [email protected].
Fort Wayne and Allen County. The Allen County Building Department runs the most structured program in the state, under Allen County Code 6-1-3-3 and its Rules & Regulations. The residential tiers are the Residential Contractors License, "limited to building construction, remodeling, repair, or improvement of one or two-family residences not exceeding two stories in height," and the Home Improvement Contractors License, which covers "improving, remodeling, and repair of existing one- and two-family structures" plus unattached garages and accessory buildings but not additions. Each is a personal license that then qualifies one business registration, and the contractor must also register a full-time Superintendent as the responsible supervisor named on each building permit. The rules state that "examinations shall be required in order for applicants to obtain a license," prepared or administered by the Building Commissioner or an approved testing facility; the exam fee is set by the Commissioner and is not printed in the rules. Annual fees are $60.00 for the Residential Contractors license, $60.00 for Home Improvement Contractors and $25.00 for each Superintendent registration, and every license expires on December 31. A license that lapses for twelve months or more can be revived by paying the outstanding fees, but if the applicable code edition changed during the lapse the holder "must apply for a new license and retest." Allen County does have a reciprocity clause: licensing reciprocity is granted subject to the guidelines for the individual trade and still requires the applicant to meet the county's minimum qualifications, and the Building Commissioner may use discretion for an applicant who presents evidence of the necessary credentials. The guidelines themselves are not published in the rules, so ask the Building Department what it will accept before assuming an out-of-state credential counts.
Evansville. The Building Commission licenses a Residential General Contractor, defined as a person in the business of "wrecking, constructing, installing, repairing, remodeling, or servicing any structural or nonstructural portions of any one- or two-family dwellings and residential or agricultural building, including residential roof coverings and site work." The route is a real qualification: submit the application with three letters of recommendation proving at least four years of experience in the field, wait for board approval to test, then schedule and pay for the exam through Ivy Tech at (812) 429-9852. The exam is open book with tabbed and highlighted references, and 70 percent passes for the contractor categories. A provisional license issues on payment plus proof of insurance and bond, and the Licensing and Disciplinary Board gives final approval on the fourth Thursday of the month. A Residential General Contractor carries general liability insurance of at least $500,000, a $25,000 surety bond on the Commission's own form and worker's compensation coverage or an affidavit of exemption, all within six months of passing the exam. Fees on the published schedule are $210.00 new, $150.00 renewal and $285.00 for a two-year renewal. A homeowner may permit work on their own residence without a license, but footing, foundation, framing and roofing subcontracted outside the immediate family must go to a licensed contractor.
South Bend and St. Joseph County. "All contractors, including subcontractors, must be registered or licensed with the Building Department in order to perform work in St. Joseph County and City of South Bend," except an owner-occupant working on their own single-family dwelling. There is one Building Contractor Registration covering houses and commercial work alike. It is a paperwork registration: the Pre-Licensing Registration Form, a $5,000 surety bond and the $125 registration fee, processed at the counter the same day. No exam, experience or reference requirement applies to it - the only categories the city reviews are Electrical and HVAC, which need a full application packet, a $50 application review fee and ten business days. Building Department, 215 S. Dr. Martin Luther King, Jr., Suite 100, [email protected], 574.235.9554.
Hammond and Lake County. Hammond tests residential builders. The Inspections Department issues a Residential General contractor license, and the exams "are given on the first Monday of the month at 10:00 a.m. at the Hammond Sportsplex" - open book, calculators allowed, one hour, 70 percent to pass, on the 2018 IRC with Indiana amendments or the 2020 Indiana Residential Code. The non-refundable examination fee is $100, with a $50 re-examination fee after a missed sitting, and the application must arrive a week before the test date together with a $20 limited criminal history report from the Hammond Police Department. Attendance at the Building Contractors Board, 6:00 p.m. on the first Monday of every month, is mandatory for approval. After approval the licensee files a certificate of insurance naming the City of Hammond with liability of 100,000/300,000 bodily injury and 50,000 property damage, worker's compensation or a waiver, and a $5,000 license and permit bond written in the name of the "Board of Lake County Commissioners, all Cities, Towns and Municipalities of Lake County, Indiana" and recorded at the Lake County Recorder's Office in Crown Point. The license fee is $200.00 initially and $100.00 on renewal, due between January 1 and January 31; licenses expire December 31 and are void if not renewed by June 30. An out-of-state corporation must also file a Certificate of Foreign Registration with the Indiana Secretary of State. The application asks in which localities you are already licensed, but holding a license elsewhere does not excuse the test.
Bloomington and Monroe County. Building permits for Bloomington come from the Monroe County Building Department at 501 N. Morton Street, and the county's licensing program is aimed at the trades rather than at builders. Monroe County licenses Plumbing Journeymen and Plumbing Contractors and Master and Residential Electricians, but its general contractor record is a sign-up, not a license: "this application is voluntary and includes a sign up of General Contractors in the Monroe County area ... there are no fees or attachments required to sign up." Licensees who do hold a county credential must carry public liability and property damage insurance naming Monroe County as an additional assured, at $500,000 combined single limit or $500,000 per occurrence for injury or death and $100,000 for property damage, plus worker's compensation unless they have no employees. Building Department, (812) 349-2580; counter hours for licenses and payments are 9-11 am and 1-3 pm.
Everywhere else. Indiana's other cities and counties set their own rules, and many smaller jurisdictions require only a building permit and proof of insurance. Ask the building or inspections department in each place before contracting there, and remember the statewide consumer rule that applies no matter where you are licensed: a home improvement contract over $150 must be in writing and must state the price, payment schedule, a detailed description of the work and materials, estimated start and completion dates and the contractor's name, address and signature.
- Indianapolis / Marion County (Department of Business and Neighborhood Services - General Contractor license)
- Fort Wayne / Allen County (Building Department - Residential and Home Improvement Contractor licenses, exam required)
- Evansville (Building Commission - Residential General Contractor license, exam and four years' experience)
- South Bend / St. Joseph County (Building Department - Building Contractor registration, no exam)
- Hammond / Lake County (Inspections Department - Residential General contractor license, exam required)
- Bloomington / Monroe County (Building Department - voluntary general contractor sign-up; plumbing and electrical licensed)
Common questions
- Do I have to take the Hawaii residential contractor exam if I'm licensed in Indiana?
- Yes. Hawaii requires the trade exam on this path, plus a law or code exam.
- What does it cost to get a Hawaii residential contractor license from Indiana?
- Published fees on this path total $50, not counting exam vendor fees or bonds.
- Do my Indiana work hours count in Hawaii?
- Yes. Documented out-of-state experience counts toward Hawaii's eligibility requirements.
- Does it work the other way, from Hawaii to Indiana?
- Not necessarily. Reciprocity is directed. Going from Hawaii to Indiana, the mechanism is not applicable.
Sources
- Contractors License Board Application Forms and Publications - DCCA Hawaii · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
- Contractors License Board - Hawaii Department of Commerce and Consumer Affairs · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
- Bond Form - Contractors License (form CT-09, rev. 09/2013) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
- Description of Contractor License Classifications - Hawaii Contractors License Board · Hawaii DCCA, Contractors License Board · Other · verified September 17, 2026
- Contractors License Board Examination - Application Deadline and Examination Dates · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
- Contractor Frequently Asked Questions - Hawaii Contractors License Board · Hawaii DCCA, Professional and Vocational Licensing Division · Faq · verified September 17, 2026
- Contractors Financial Statement (prescribed form CT-02, rev. 11/2017) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
- Requirements for License - Contractor, Entity (Form CT-00, rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
- Requirements for License - Contractor, Responsible Managing Employee (Form CT-00(A), rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
- Requirements for License - Contractor, Sole Proprietor (rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
- Hawaii Administrative Rules Title 16, Chapter 77 - Contractors · HAR 16-77-6, 16-77-8, 16-77-11, 16-77-12, 16-77-28, 16-77-32, 16-77-33, 16-77-35, 16-77-39 to 16-77-46, 16-77-54, 16-77-55, 16-77-71, 16-77-76, 16-77-89 · Hawaii DCCA, Contractors License Board · Admin Rule · verified September 17, 2026
- HRS 444-11 - No license issued when (contractor qualifications) · HRS 444-11 · Hawaii State Legislature · Statute · verified September 17, 2026
- HRS 444-7 - Classification (contractors) · HRS 444-7 · Hawaii State Legislature · Statute · verified September 17, 2026
- HRS 444-9 - Licenses required (contractors) · HRS 444-9 · Hawaii State Legislature · Statute · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.