Indiana to New Mexico: residential contractor license reciprocity
Indiana does not issue a statewide residential contractor license, so there is nothing to transfer. Here is New Mexico's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Out-of-state residential contractor applying for GB-2 (all states)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
A residential contractor licensed in another state gets no exam waiver and no shortened path to a New Mexico GB-2 license. The only reciprocity the Construction Industries Division publishes is for the EE-98J electrical journeyman certificate, 14.6.3 NMAC contains no endorsement or substantial-equivalence route for a contractor or Qualifying Party, and the NASCLA exam waiver that CID does operate is limited to the GB-98 and EE-98 classifications, not GB-2. What does carry across is the work itself: out-of-state experience counts in full toward the two years (4,000 hours) of foreman-level experience, provided it was gained while employed by a contractor licensed in the trade or was legal work in the state where it was performed, and the out-of-state contractor who signs the notarized affidavit attaches a copy of their own current state license. The applicant files the Qualifying Party application and General Building Work Experience Verification affidavits with PSI, waits for CID or PSI to approve the experience, then passes the GB-2 exam and the Business and Law exam, and the company that will hold the license applies separately with the bond, the tax registration certificate and proof of the Qualifying Party's exams. Statute does let the division enter reciprocal agreements with states having equivalent requirements, but none covering a building classification has been published.
Accredited college, university, manufacturer, vocational or apprenticeship training counts as one-half year of experience per year and may not exceed half of the two-year requirement. Estimating, project management, ordering supplies and supervising do not count as hands-on experience on the affidavit, and the affidavit must state whether the experience was residential or commercial. Once PSI approves the application, every remaining requirement must be met within six months or the fees are forfeited, and the trade exam and the Business and Law exam must both be passed within one year of each other. An exam may not be repeated more than twice in any 30-day period. Military service members, their spouses and dependent children and veterans who are currently licensed and in good standing in another jurisdiction with substantially equivalent requirements have a separate expedited route: CID issues within 30 days and waives the license fees for the first three years. A homeowner-scale exemption exists for an individual doing one project at a time for no more than $7,200 a year in casual or handyman work, but it does not extend to electrical, plumbing or gas fitting and requires an annual declaration to the division.
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must document at least 4,000 hours of qualifying work experience.Two years (4,000 hours) of foreman-level practical or related trade experience in residential building, gained within the ten years immediately before application (14.6.6.9(B)(1) NMAC; NMSA 60-13-14(B)(8) as reduced by rule). It is documented on notarized General Building Work Experience Verification affidavits, one per employer or affiant, completed by an employer, supervisor, foreman or other contractor rather than by the applicant.
- Experience must have been gained while employed by a contractor licensed in the trade being applied for, or be work that was legal in the state where it was performed. An out-of-state contractor certifying the experience attaches a copy of their current state license to the affidavit; where the state does not license that trade, proof that the company was active and valid, such as a tax certificate or corporation papers, is attached instead.
- The Qualifying Party must be at least 18 and may qualify only one licensed entity unless there is at least thirty percent common ownership between the entities. CID may deny a license or certificate where the applicant or the proposed Qualifying Party has a disqualifying felony conviction, and an applicant denied on that basis may submit written evidence of mitigation or rehabilitation and appeal.
What you'll do to get licensed in New Mexico
- 1Application fee. Pay the application fee ($30). Non-refundable Qualifying Party application fee, paid to PSI with the notarized application and work-experience affidavits. Complete packets go to the PSI Albuquerque office by hand or mail; faxed and emailed forms are not accepted..
- 2Other. Qualifying Party certificate fee, charged for each classification on the application (14.5.5.14(A) NMAC). With the $30 application fee this is the $36 the Construction Industries Division quotes for a single-classification Qualifying Party filing. ($6).
- 3Trade exam. Pass the destination's trade exam. GB-2 Residential Building Contractor exam, administered by PSI once CID or PSI approves the experience affidavits: 80 questions, 225 minutes, open book, 75% (60 points) to pass. Content covers sitework, footings and foundations, concrete and reinforcement, masonry, carpentry, roofing, associated trades, general code, plan reading and estimating, and OSHA safety, against the 2021 New Mexico Residential Building Code (14.7.3 NMAC), the 2021 International Residential Code, the 2021 International Energy Conservation Code and 29 CFR 1926..
- 4Exam fee. Pay the exam fee ($134.53). PSI fee for the GB-2 exam, charged for a first attempt or a retake..
- 5Law / code exam. Pass a law, rules, or code exam. Contractor's Business and Law exam, required of all new Qualifying Party candidates: 50 questions, 130 minutes, open book, 75% (38 points) to pass, covering licensing requirements, estimating and bidding, business organization and financial management, tax and labor law, project management and lien law, contracts, risk management, and environment and safety. An approved Business and Law course taken with a CID-approved vendor may be completed in place of the exam..
- 6Exam fee. Pay the exam fee ($68.88). PSI fee for the Business and Law exam..
- 7Contractor license. Hold or obtain a contractor license ($30). Non-refundable contractor license application fee paid to PSI by the business, filed with the notarized Contractor License Application, a copy of the Qualifying Party's certificate or passing score reports, and the Business and Law score or course certificate. A $6 certificate fee covering the license certificate and two wallet cards is charged with it..
- 8License fee. Pay the license or certificate fee ($300). Classification fee for GB-2, covering the full three-year license term on PSI's current schedule. Adding a GS specialty classification alongside it does not raise the total above $300 for the category. Late renewal costs $1 a day for the first 30 days and the equivalent of one year's fee from 30 to 90 days; after 90 days the license is cancelled and the business must reapply..
- 9Surety bond. Post a surety bond ($10,000). $10,000 code bond from a corporate surety authorized to transact business in New Mexico, issued in the exact name shown on the application and effective for the entire three-year license period. It is the statutory proof of responsibility, may be drawn on only to cure division-certified code violations the licensee has not corrected, and must be kept in force for the whole term; claims are limited to two years after final inspection or issuance of a certificate of occupancy..
- 10Insurance. Carry the required insurance. Workers' compensation coverage is required of every licensed entity, and failure to maintain it is cause for revocation of the license. A sole proprietor with no employees may be exempt; the Workers' Compensation Administration can confirm. An application is placed on hold while the applicant is out of compliance..
- 11Business license. Obtain a business license. A registration certificate issued within the last twelve months by the New Mexico Taxation and Revenue Department in the exact name on the license application, plus proof of registration with the New Mexico Public Regulation Commission for a corporation or LLC, or with the Secretary of State for a limited liability partnership or limited partnership. A corporation, LLC, LP or LLP must be legally authorized to do business in New Mexico before the license issues, and the proposed business name must be cleared with PSI first..
- 12Background check. Complete a background check. CID reviews the application against the disqualifying felony convictions listed in 14.6.3.8(F) NMAC and may deny a license or certificate on that basis; sealed, dismissed, expunged or pardoned convictions and juvenile adjudications are not used. An application is also held where there are pending CID disciplinary actions, a workers' compensation compliance problem, a child support delinquency for the proposed Qualifying Party, or an open unlicensed-activity investigation..
Published fees on this path total $533.41, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Exam fee · $134.53
- Law / code exam
- Exam fee · $68.88
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $10,000
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How New Mexico licenses residential contractors
New Mexico residential contractor · “GB-2 Residential Building Contractor”
Statewide license
New Mexico licenses homebuilders statewide through the Construction Industries Division of the Regulation and Licensing Department, and the homes-only classification is GB-2 Residential: erect, alter, repair or demolish residences and apartment houses of not more than four family units in occupancy Groups R-1, R-2 and R-3, plus incidental Group U structures and any GS specialty work kept inside that residential scope. Anything commercial, and any residential building beyond four units, needs the GB-98 General Building classification instead. The license is held by a business, not by a person: CID issues it to a qualified entity that employs or is owned by a Qualifying Party, and the Qualifying Party is the individual who documents the experience, sits the exams and holds a personal, non-transferable certificate of qualification, so a builder moving to New Mexico applies first as a Qualifying Party and then for the company license. A GB-2 Qualifying Party needs two years (4,000 hours) of foreman-level practical or related trade experience gained within the ten years before applying, and must pass the GB-2 trade exam and the Contractor's Business and Law exam, or take an approved Business and Law course in place of that exam. Every licensed entity files a $10,000 code bond and carries workers' compensation coverage, and licenses run for three years. CID publishes reciprocity for one credential only, the EE-98J electrical journeyman certificate, so no other state's contractor license is recognized at this level.
Why Indiana has nothing to transfer
Indiana residential contractor · “Residential Contractor / Residential General Contractor / Home Improvement Contractor (city- or county-issued)”
Licensed by cities and counties
Issued by No state authority; cities and counties license, register or exempt residential contractors
Indiana issues no statewide residential contractor, home builder or remodeler license. The Indiana Professional Licensing Agency's list of state-licensed professions covers plumbing, home inspectors, manufactured home installers, architects and surveyors and contains no residential or general building contractor credential, and the Indiana Department of Homeland Security's Division of Fire and Building Safety enforces the state building code and inspects boilers, elevators and fire safety devices without licensing builders. What Indiana licenses at state level is plumbing, through the Indiana Plumbing Commission at the PLA, plus manufactured home installation and home inspection; electricians and HVAC technicians are licensed by cities and counties too, so a builder who self-performs those trades still qualifies locally. Homebuilding is governed jurisdiction by jurisdiction, and the range is wide: Fort Wayne and Allen County, Evansville and Hammond each run a written competency examination for a residential builder, Indianapolis and South Bend require a bonded and insured company license or registration with no exam, and the Monroe County sign-up that covers Bloomington is voluntary and free. The Indiana Attorney General's own consumer fact sheet says that "licensing requirements vary from community to community" and tells homeowners to check with the city or county building department. A residential contractor moving to Indiana therefore has no state license to transfer and no reciprocity to apply for; the work is qualifying separately in each place where permits will be pulled, and state law separately requires any home improvement contract over $150 to be in writing.
How local licensing works in Indiana
How it works in Indiana. There is no state contractor board, no state application and no state exam, so each city or county writes its own contractor ordinance under the state building code. A residential builder must hold whatever credential the jurisdiction issues in every place where they pull permits, and a license from one Indiana jurisdiction does not carry into the next. The credentials fall into two very different kinds. In Fort Wayne and Allen County, Evansville and Hammond a person sits a written examination and is approved by a licensing board; in Indianapolis and South Bend the license is a business filing backed by a surety bond and insurance with no test at all; and in Monroe County, which covers Bloomington, signing up as a general contractor is optional. Nothing an arriving contractor holds from another state waives any of it, and none of the jurisdictions below publishes a route that converts an out-of-state residential builder license into a local one.
Indianapolis and Marion County. The Department of Business and Neighborhood Services issues a single General Contractor license that covers houses as well as commercial work; the same application form carries checkboxes for Electrical, General, HVAC, Plumbing and Wrecking. The packet is proof of business registration (Indiana Secretary of State, or a county DBA filing for a sole proprietor or partnership), a certificate of insurance naming the Consolidated City of Indianapolis and Marion County as certificate holder and additional insured with general liability of at least $500,000 for each occurrence of death or bodily injury and $100,000 for each occurrence of property damage, or $500,000 per occurrence combined, worker's compensation coverage or a Worker's Compensation Board exemption waiver, and a typed $10,000 license or permit surety bond naming "Consolidated City of Indianapolis and/or an Unknown Third Party" as obligee. Licenses expire on December 31 of even-numbered years and renew every two years; the new-license fee is prorated across the term ($247.00, $185.00 and $124.00 at the three stages published in the current packet) and renewal is $247.00. Up to five authorized agents may be listed free, with $63.00 for each additional agent, and every new license listing must attend an orientation class within 60 days of issuance. There is no examination, experience or qualifying-individual requirement on the General type. Contractor Licensing, 200 E. Washington St., Suite 107, (317) 327-1291, [email protected].
Fort Wayne and Allen County. The Allen County Building Department runs the most structured program in the state, under Allen County Code 6-1-3-3 and its Rules & Regulations. The residential tiers are the Residential Contractors License, "limited to building construction, remodeling, repair, or improvement of one or two-family residences not exceeding two stories in height," and the Home Improvement Contractors License, which covers "improving, remodeling, and repair of existing one- and two-family structures" plus unattached garages and accessory buildings but not additions. Each is a personal license that then qualifies one business registration, and the contractor must also register a full-time Superintendent as the responsible supervisor named on each building permit. The rules state that "examinations shall be required in order for applicants to obtain a license," prepared or administered by the Building Commissioner or an approved testing facility; the exam fee is set by the Commissioner and is not printed in the rules. Annual fees are $60.00 for the Residential Contractors license, $60.00 for Home Improvement Contractors and $25.00 for each Superintendent registration, and every license expires on December 31. A license that lapses for twelve months or more can be revived by paying the outstanding fees, but if the applicable code edition changed during the lapse the holder "must apply for a new license and retest." Allen County does have a reciprocity clause: licensing reciprocity is granted subject to the guidelines for the individual trade and still requires the applicant to meet the county's minimum qualifications, and the Building Commissioner may use discretion for an applicant who presents evidence of the necessary credentials. The guidelines themselves are not published in the rules, so ask the Building Department what it will accept before assuming an out-of-state credential counts.
Evansville. The Building Commission licenses a Residential General Contractor, defined as a person in the business of "wrecking, constructing, installing, repairing, remodeling, or servicing any structural or nonstructural portions of any one- or two-family dwellings and residential or agricultural building, including residential roof coverings and site work." The route is a real qualification: submit the application with three letters of recommendation proving at least four years of experience in the field, wait for board approval to test, then schedule and pay for the exam through Ivy Tech at (812) 429-9852. The exam is open book with tabbed and highlighted references, and 70 percent passes for the contractor categories. A provisional license issues on payment plus proof of insurance and bond, and the Licensing and Disciplinary Board gives final approval on the fourth Thursday of the month. A Residential General Contractor carries general liability insurance of at least $500,000, a $25,000 surety bond on the Commission's own form and worker's compensation coverage or an affidavit of exemption, all within six months of passing the exam. Fees on the published schedule are $210.00 new, $150.00 renewal and $285.00 for a two-year renewal. A homeowner may permit work on their own residence without a license, but footing, foundation, framing and roofing subcontracted outside the immediate family must go to a licensed contractor.
South Bend and St. Joseph County. "All contractors, including subcontractors, must be registered or licensed with the Building Department in order to perform work in St. Joseph County and City of South Bend," except an owner-occupant working on their own single-family dwelling. There is one Building Contractor Registration covering houses and commercial work alike. It is a paperwork registration: the Pre-Licensing Registration Form, a $5,000 surety bond and the $125 registration fee, processed at the counter the same day. No exam, experience or reference requirement applies to it - the only categories the city reviews are Electrical and HVAC, which need a full application packet, a $50 application review fee and ten business days. Building Department, 215 S. Dr. Martin Luther King, Jr., Suite 100, [email protected], 574.235.9554.
Hammond and Lake County. Hammond tests residential builders. The Inspections Department issues a Residential General contractor license, and the exams "are given on the first Monday of the month at 10:00 a.m. at the Hammond Sportsplex" - open book, calculators allowed, one hour, 70 percent to pass, on the 2018 IRC with Indiana amendments or the 2020 Indiana Residential Code. The non-refundable examination fee is $100, with a $50 re-examination fee after a missed sitting, and the application must arrive a week before the test date together with a $20 limited criminal history report from the Hammond Police Department. Attendance at the Building Contractors Board, 6:00 p.m. on the first Monday of every month, is mandatory for approval. After approval the licensee files a certificate of insurance naming the City of Hammond with liability of 100,000/300,000 bodily injury and 50,000 property damage, worker's compensation or a waiver, and a $5,000 license and permit bond written in the name of the "Board of Lake County Commissioners, all Cities, Towns and Municipalities of Lake County, Indiana" and recorded at the Lake County Recorder's Office in Crown Point. The license fee is $200.00 initially and $100.00 on renewal, due between January 1 and January 31; licenses expire December 31 and are void if not renewed by June 30. An out-of-state corporation must also file a Certificate of Foreign Registration with the Indiana Secretary of State. The application asks in which localities you are already licensed, but holding a license elsewhere does not excuse the test.
Bloomington and Monroe County. Building permits for Bloomington come from the Monroe County Building Department at 501 N. Morton Street, and the county's licensing program is aimed at the trades rather than at builders. Monroe County licenses Plumbing Journeymen and Plumbing Contractors and Master and Residential Electricians, but its general contractor record is a sign-up, not a license: "this application is voluntary and includes a sign up of General Contractors in the Monroe County area ... there are no fees or attachments required to sign up." Licensees who do hold a county credential must carry public liability and property damage insurance naming Monroe County as an additional assured, at $500,000 combined single limit or $500,000 per occurrence for injury or death and $100,000 for property damage, plus worker's compensation unless they have no employees. Building Department, (812) 349-2580; counter hours for licenses and payments are 9-11 am and 1-3 pm.
Everywhere else. Indiana's other cities and counties set their own rules, and many smaller jurisdictions require only a building permit and proof of insurance. Ask the building or inspections department in each place before contracting there, and remember the statewide consumer rule that applies no matter where you are licensed: a home improvement contract over $150 must be in writing and must state the price, payment schedule, a detailed description of the work and materials, estimated start and completion dates and the contractor's name, address and signature.
- Indianapolis / Marion County (Department of Business and Neighborhood Services - General Contractor license)
- Fort Wayne / Allen County (Building Department - Residential and Home Improvement Contractor licenses, exam required)
- Evansville (Building Commission - Residential General Contractor license, exam and four years' experience)
- South Bend / St. Joseph County (Building Department - Building Contractor registration, no exam)
- Hammond / Lake County (Inspections Department - Residential General contractor license, exam required)
- Bloomington / Monroe County (Building Department - voluntary general contractor sign-up; plumbing and electrical licensed)
Common questions
- Do I have to take the New Mexico residential contractor exam if I'm licensed in Indiana?
- Yes. New Mexico requires the trade exam on this path, plus a law or code exam.
- What does it cost to get a New Mexico residential contractor license from Indiana?
- Published fees on this path total $533.41, not counting exam vendor fees or bonds.
- Do my Indiana work hours count in New Mexico?
- Yes. Documented out-of-state experience counts toward New Mexico's eligibility requirements.
- Does it work the other way, from New Mexico to Indiana?
- Not necessarily. Reciprocity is directed. Going from New Mexico to Indiana, the mechanism is not applicable.
Sources
- Construction Industries Licensing Act, NMSA 1978 Chapter 60, Article 13 (RLD compilation as of July 1, 2021) · NMSA 1978 §§ 60-13-3, 60-13-14, 60-13-14.1, 60-13-23, 60-13-49 · New Mexico Regulation and Licensing Department · Statute · verified September 17, 2026
- 14.5.5 NMAC - Construction Industries General Provisions: Fees · 14.5.5.8 and 14.5.5.14 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
- 14.6.3 NMAC - Construction Industries Licensing: Contractor's License Requirements · 14.6.3.8 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
- 14.6.6 NMAC - Construction Industries Licensing: Classifications and Scopes of Work · 14.6.6.8 and 14.6.6.9 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
- NM CID - How to Obtain a Contractor License and Contractor License Application (updated October 2023) · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
- State of New Mexico Contractor (Qualifying Party) Examinations Candidate Information Bulletin (PSI) · PSI Services for the NM Construction Industries Division · Other · verified September 17, 2026
- New Mexico Contractor Licensing - Frequently Asked Questions (CID / PSI) · PSI Services for the New Mexico Construction Industries Division · Faq · verified September 17, 2026
- PSI General Building Work Experience Verification - New Mexico Contractor Licensing Service · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
- New Mexico Licensing Fees (CID contractor, qualifying party and journeyman fee schedule) · PSI Services for the New Mexico Construction Industries Division · Other · verified September 17, 2026
- NM CID Qualifying Party Certificate Application and Instructions (instructions updated May 2025, form updated August 2025) · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
- NM Regulation and Licensing Department - Apply for a Construction Industries License · New Mexico Regulation and Licensing Department, Construction Industries Division · Agency Page · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.