Kansas to California: residential contractor license reciprocity
Kansas does not issue a statewide residential contractor license, so there is nothing to transfer. Here is California's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Original B-2 application: out-of-state experience counts, both examinations required
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
CSLB publishes no trade examination waiver for the B-2 Residential Remodeling classification except for holders of a North Carolina Building Contractor license, so an applicant arriving from any other state files the Application for Original Contractor's License, pays the $450 processing fee and sits both the Law and Business examination and the B-2 trade examination through PSI. Work done in another state does count toward eligibility: the qualifying individual must show at least four years of experience within the past 10 years as a journeyperson, foreperson, supervising employee or contractor in the classification applied for, and Business and Professions Code section 7068(h) directs the registrar to review experience gained in other states and confirm it was gained lawfully there. Those claims go on a Certification of Work Experience form completed by someone with firsthand knowledge of the work, and CSLB may ask for documents to back them up. The NASCLA Commercial General Builders examination waiver that CSLB accepts from applicants in any state applies only to the CSLB General Building classification, not to B-2. Once CSLB accepts the application you have 18 months to pass both examinations, after which the application is void and you must file again with new fees.
California sets no net worth, working capital or financial statement requirement for a contractor license. The financial solvency section of the Contractors State License Law, Business and Professions Code section 7067.5, was repealed effective January 1, 2016 and the matching regulation on operating capital was repealed in 2016; the $25,000 contractor bond stands in its place. CSLB does not publish an end-to-end processing time from application to issued license, only the date each unit is currently working on, updated weekly on its Processing Times page. Questions about the B-2 classification or an application in progress go to the Licensing Information Center on (800) 321-CSLB (2752).
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must document at least 4 years of qualifying work experience.Journey-level means a worker who has completed an apprenticeship or is an experienced worker, not a trainee, and is fully qualified to perform the trade without supervision. Technical training, apprenticeship training or education can be credited in place of part of the four years, but at least one year must be practical experience and the training or education must be documented with apprenticeship certificates or college transcripts. The experience section of the application must be completed even by applicants who expect an examination waiver.
- Experience earned outside California counts. Business and Professions Code section 7068(h) requires the registrar to review experience gained by applicants from other states and to determine that all of it was gained in a lawful manner in that state, so work performed where a license was required but not held may be rejected.
- The qualifying individual is at least 18 years old and has a Social Security number or an Individual Taxpayer Identification Number. A qualifying individual may not hold another active contractor's license while acting as qualifier, except as allowed by Business and Professions Code section 7068.1.
What you'll do to get licensed in California
- 1Application fee. Pay the application fee ($450). Non-refundable original application fee of $450, covering one classification, payable with the Application for Original Contractor's License. Adding a second classification on the same original application costs $150..
- 2License fee. Pay the license or certificate fee ($200). Initial license fee of $200 for a sole owner, or $350 for a non-sole owner, paid after the examinations are passed and the remaining issuance documents are filed. It buys a two-year license. CSLB's own worked total for one classification is $650 for a sole owner and $800 for a non-sole owner, application fee included..
- 3Trade exam. Pass the destination's trade exam. B-2 Residential Remodeling trade examination, administered for CSLB by PSI Exams. It is not waived on this path. You have 18 months after CSLB accepts the application to pass it and the Law and Business examination; passing scores stay good for five years..
- 4Law / code exam. Pass a law, rules, or code exam. CSLB Law and Business examination, administered by PSI Exams. Every original applicant takes it, including anyone whose trade examination is waived by reciprocity..
- 5Exam fee. Pay the exam fee. Rescheduling and re-examination fees are paid directly to PSI each time. CSLB does not publish the amounts on its fee list; they are in the Candidate Information Bulletin PSI sends with the Notice to Schedule an Examination, or ask CSLB on (800) 321-CSLB (2752)..
- 6Background check. Complete a background check. Mandatory criminal background check by Live Scan fingerprinting after CSLB accepts the application. Paid to the Live Scan operator: $32 to the Department of Justice and $17 to the Federal Bureau of Investigation, plus a rolling fee that each site sets for itself and CSLB does not set..
- 7Surety bond. Post a surety bond ($25,000). Contractor's bond of $25,000, required by Business and Professions Code section 7071.6 before CSLB can issue an active license. It must be written by a surety licensed through the California Department of Insurance on a form approved by the Attorney General's Office, must name the business exactly as CSLB records it, and must reach CSLB headquarters within 90 days of its effective date. A cashier's check may be filed instead..
- 8Surety bond. Post a surety bond ($25,000) (if applicable). Bond of Qualifying Individual, $25,000, required by Business and Professions Code section 7071.9 when the license is qualified by a responsible managing employee, or by a responsible managing officer who owns less than 10 percent of the corporation's voting stock. An RMO who owns 10 percent or more files a Bond of Qualifying Individual Exemption Certification instead. Each RME or RMO on a license must comply separately..
- 9Surety bond. Post a surety bond ($100,000) (if applicable). LLC employee/worker bond of $100,000, required by Business and Professions Code section 7071.6.5 only where the license is held by a limited liability company. It is in addition to the $25,000 contractor bond and protects employees against unpaid wages, interest on wages, fringe benefits and other contributions..
- 10Insurance. Carry the required insurance ($1,000,000) (if applicable). Liability insurance of at least $1,000,000 cumulative, required by Business and Professions Code section 7071.19 only where the license is held by a limited liability company with five or fewer people listed as personnel of record. Each additional member of the personnel of record adds $100,000, capped at $5,000,000. The policy must be written by an insurer licensed in California or an eligible surplus line insurer..
- 11Insurance. Carry the required insurance. Workers' compensation insurance, or a certificate of self-insurance from the Department of Industrial Relations, before CSLB will issue or activate the license if the business has employees. A business with no employees files an exemption instead, but CSLB will not accept an exemption where the license is qualified by a responsible managing employee, because an RME is an employee..
- 12Business license. Obtain a business license. The CSLB license is issued to a business entity: sole owner, partnership, corporation, limited liability company or joint venture. Form or register the entity first, since every officer, member, responsible manager or director must be listed as personnel of record. Cities and counties also require their own business tax registration or business license wherever you work, separately from the CSLB license..
- 13Other. Certification of Work Experience form for each period of experience claimed, completed by an employer, fellow employee, other journeyperson, contractor, union representative, building inspector, architect, engineer or client who observed the work. CSLB does not visit worksites and does not accept photographs as proof, and it randomly reviews a percentage of experience statements..
Published fees on this path total $650, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Law / code exam
- Exam fee
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $25,000
- Surety bond · $25,000 · if applicable
- Surety bond · $100,000 · if applicable
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance · $1,000,000 · if applicable
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How California licenses residential contractors
California residential contractor · “B-2 Residential Remodeling Contractor (Class B General Building also covers homes)”
Statewide license
Issued by Contractors State License Board
California licenses residential contractors statewide through the Contractors State License Board (CSLB), and the homes-only classification is B-2 Residential Remodeling Contractor, created by Business and Professions Code section 7057.5 and issued since January 1, 2021. A B-2 contractor improves an existing residential wood frame structure and may only take a contract that requires at least three unrelated building trades or crafts; it cannot make structural changes to load-bearing parts of a building such as footings, foundations, load-bearing walls or roof structures, and it cannot install, replace or extend electrical, mechanical or plumbing systems unless it holds the matching specialty classification or subcontracts that work. A Class B General Building license also covers houses, including new construction and structural remodeling, so many residential builders apply for B instead of or as well as B-2. CSLB issues the license to a business (sole owner, partnership, corporation, limited liability company or joint venture) and the person who meets the experience and examination requirements is named on it as the qualifying individual, a responsible managing employee (RME) or responsible managing officer (RMO), so the reader who is moving states applies as that qualifier. A contractor license from another state cannot be used in California, even as a subcontractor or for a single project, and any project worth $1,000 or more in labor and materials, or any project needing a permit or workers, requires a CSLB license. Cities and counties separately require a local business tax registration, which is an additional step and not a substitute for the state license.
Why Kansas has nothing to transfer
Kansas residential contractor · “Residential contractor license (Class C in most Kansas jurisdictions)”
Licensed by cities and counties
Issued by No state authority; cities and counties license residential contractors
Kansas issues no statewide residential builder, home builder or home improvement contractor license, and it has no state contractor board or state contractor exam. Cities and counties license builders instead, and most of the larger ones use the same shape: a company-held license qualified by a named person, in classes lettered A for unlimited work, B for buildings up to three stories and C for houses and duplexes. What the legislature did do is standardize the test. K.S.A. 12-1556 designates a set of standard examinations for 'general contractors, building contractors and residential contractors', and K.S.A. 12-1557 requires any Kansas city or county that licenses builders to set a 75 percent passing score, to charge a uniform examination fee and to accept the resulting certificate of competency 'without additional examination' anywhere else in the state that licenses contractors. In practice that means the credential Kansas jurisdictions care about is a passing score on the ICC Kansas contractor examination series - 550 for the Class A general building contractor, 551 for Class B and 552 for Class C residential - rather than a license held anywhere else. A residential builder moving to Kansas therefore has no state license to transfer and nothing to reciprocate into; the practical work is sitting the Kansas standard examination once, then licensing the business in each place where it will pull permits. The state does license two things a residential builder touches: roofing contractors, who must register with the Kansas Attorney General under the Kansas Roofing Registration Act before selling roofing services for a fee, and mobile home installers.
How local licensing works in Kansas
How local licensing works. Every Kansas contractor license is issued by a city or a county, and the license belongs to the company rather than to the person; the company names a qualifying individual or qualifying party who supplies the examination result or degree, and losing that person usually inactivates the license. Two state statutes shape what the jurisdictions may ask. K.S.A. 12-1557 caps the examination at the designated standard test, sets the passing score at 75 percent, and makes the certificate of competency from that test valid for licensure 'without additional examination' in any other Kansas county or city that licenses contractors. K.S.A. 12-1558 lets a jurisdiction use a different examination instead, but a license granted on a non-standard examination does not authorize work outside that jurisdiction 'except when authorized by reciprocal agreement between the political subdivisions involved' - so the only contractor reciprocity Kansas law contemplates is between Kansas cities and counties, never with another state. None of the jurisdictions below gives any credit for a contractor license issued outside Kansas.
Johnson County (Overland Park, Olathe, Lenexa, Leawood, Shawnee and the rest of the county). Johnson County Contractor Licensing, a division of Planning, Housing and Community Development, issues and tracks eleven license types for the whole county. Building permits are issued by Johnson County Building Codes in the unincorporated county and by each city elsewhere, and the county's own application states the rule plainly: 'When a building permit is issued in the company/firm's name, the company/firm must comply with Johnson County Contractor Licensing Regulations (Resolution 076-24) and be subject to the jurisdiction of the Johnson County Contractor Licensing Review Board.' The residential class is Class C, which 'shall entitle the holder thereof to construct, remodel, repair, and demolish single-family or duplex residences and buildings accessory thereto', including framing, roofing, swimming pool construction, non-structural remodeling and repairs, but not HVAC, plumbing, electrical or fire protection work, which need the separate DM, DP, DE and DF or DFA licenses. Qualification is ICC exam 552 or KGC, Standard Residential Building Contractor, at 75 percent or better, or a Bachelor of Science or higher in architecture, relevant engineering, construction science or construction management from an ABET or ACCE accredited program. The company must designate a qualifying individual who works at least 30 hours a week for it, and every qualifying individual needs eight hours of approved continuing education a year for the company to renew. Insurance is $1,000,000 combined single limit per occurrence plus $1,000,000 completed operations, with the county named as certificate holder and 30 days' notice of any reduction, plus workers' compensation with $100,000 employer's liability or a notarized waiver if there are no employees. A Certificate of Good Standing is needed from the Secretary of State where the company is registered. Fees are a $100 application fee plus $225 per license type, so a single new license is $325; renewal is $225 per type with a $75 late fee from February 1. New applications cannot be filed online. Licenses are valid for one year. 111 S. Cherry Street, Suite 1000, Olathe; 913-715-2233 option 1.
Wichita and Sedgwick County. The Metropolitan Area Building and Construction Department licenses contractors for unincorporated Sedgwick County, the City of Wichita and the small cities it serves, and its position on outside credentials is explicit: 'MABCD does not reciprocate with other jurisdictions.' The residential general class is Class C - Residential, and there is also a Class D Residential Maintenance license; general contractor licenses run two years and expire on December 31 of each even year, with a grace period to January 31. The qualified person must produce 'a copy of Kansas Standard ICC exam' with a score of 75 percent or better, and must file an ICC test release form if the examination was taken outside Kansas. Two-year license fees are $1,000 for Class A, $600 for Class B, $450 for Class C Residential and $360 for Class D Residential Maintenance, roofing, siding, roofing and siding, swimming pool, wrecking, cell tower, fire sprinkler and 'not otherwise classified'; a new application costs an extra $50, and late renewal adds 25 percent in February and 50 percent after that. The filing also needs liability insurance of at least $300,000 naming MABCD as certificate holder in the exact company name, a workers' compensation certificate or a notarized waiver, an auto certificate or a notarized waiver, a Certificate of Good Standing from the Kansas Secretary of State unless the applicant is a sole proprietor, a qualified person declaration page, a company officers signature page and a letter authorizing the qualified person to bind the company in contracts. Roofing applicants must show their Kansas Attorney General roofer registration number. Review takes up to two weeks. 271 W. 3rd, Suite 101, Wichita; 316-660-1840, by appointment.
Kansas City, Kansas and Wyandotte County. The Unified Government works differently from the rest of the state: it does not run a competency license for builders. 'General contractors and subcontractors are required to obtain a city occupational tax license (Business License) if working within Wyandotte County', which is handled by Business Licensing on (913) 573-8780, while 'trade masters are required to carry a master's license with Building Inspections', earned on a Prometric or equivalent standard examination and administered through the Neighborhood Resource Center. A remodeler or homebuilder working in Kansas City, Kansas therefore registers and pays the occupational tax rather than qualifying a person, and makes sure the electrical, mechanical and plumbing scope is performed by licensed masters. Building Inspection and the License Department are both at 4601 State Avenue, Indian Springs Marketplace; Building Inspection (913) 573-8620.
Topeka. The Development Services Division 'is responsible for issuing all contractor and trade licenses in the City of Topeka', and 'all trades are required to be licensed and pull permits to work in City of Topeka.' The residential class is Class C, qualified by ICC exam 552, the Kansas Standard Residential Building Contractor examination, at 75 percent or better; Class B uses exam 551 and Class A exam 550. Topeka will also accept results from Prometric, Thomson-Prometric, Experior, NAI-Block and Block at 75 percent or better, subject to review, or an official transcript for at least 30 hours of coursework from an accredited school in construction science, engineering or architecture, in which case the degree holder becomes the qualifying party and must work for the company full time. The application is filed with the exam or educational certification, a qualifying party verification form, the Renovate Right form, a general liability certificate and a workers' compensation certificate or notarized affidavit, all naming City of Topeka Development Services, 620 SE Madison Unit 6, as certificate holder; processing takes up to ten days. Class A, B and C holders need eight hours of continuing education a year, licenses renew by December 14 each year, fees are not prorated, a lapse in the insurance certificate costs $30 to reinstate after a 30-day grace period, and an unreported address change costs $10. Roofers must supply their Kansas Attorney General roofer registration certificate number before Topeka will license them. The city does not publish its general contractor license fee online - ask Development Services on 785-368-3905 for the current amount before applying.
Lawrence. Chapter 5, Article 15 of the City Code requires a Lawrence contractor license before anyone may 'undertake or perform any action in the City for which a Building Permit is required.' The residential class is Class C, Residential Contractor, covering any permitted work 'on any detached dwelling or duplex'; Class B covers structures up to three stories and Class A everything. Class C needs two years of qualifying experience performing Class C work, or a valid Class D license plus four years as a licensed Class D contractor, and experience claims must be verified by a licensed contractor, building official, architect or engineer. Competency is shown by a certificate of competency from a nationally recognized testing institution of the kind contemplated by K.S.A. 12-1556, by a bachelor's degree in engineering, architecture or construction science, or 'an equivalent Contractor License from another jurisdiction with whom the City has an existing and valid reciprocity agreement' - the ordinance provides for such agreements but names none, so ask Building Inspections whether one covers your jurisdiction before relying on it. Fees are a $75 application fee for each applicant and each qualifying party plus a $75 annual license fee. Insurance is commercial general liability of not less than $1,000,000 per occurrence including completed operations, written by a Kansas-licensed insurer, plus workers' compensation. The Building Official decides within 30 days. The license is company-held, each qualifying party must be a principal or an employee working more than 30 hours a week, and any change of company name, ownership or qualifying party voids the license and requires a new one. Renewal needs eight hours of construction-related continuing education a year for every qualifying party, all delinquent fees paid and all inactive open permits closed or extended. Separate Class E licenses cover mechanical, plumbing, electrical and fireplace work, and those trades also need certified master or journeyman tradespeople. (785) 832-7700.
Everywhere else. Kansas has hundreds of other cities and counties, each free to license builders, to license only the trades, or to require nothing beyond a permit and proof of insurance. Find the building department with jurisdiction over the address and ask before you bid. Two obligations follow you across the whole state whatever the local answer: register with the Kansas Attorney General before providing roofing services for a fee unless you qualify as an exempt general contractor, and hold or employ the right trade credentials for any electrical, plumbing or mechanical work.
- Johnson County Contractor Licensing (Class C Residential; covers Overland Park, Olathe, Lenexa, Leawood and Shawnee)
- Wichita and Sedgwick County (MABCD - Class C Residential and Class D Residential Maintenance licenses)
- Kansas City, Kansas and Wyandotte County (occupational tax business license; trade master licenses)
- Topeka (Development Services - Class A, B and C general contractor licenses)
- Lawrence (Planning and Development Services - Class C Residential Contractor license under City Code ch. 5, art. 15)
- Kansas Attorney General - Roofing Registration (statewide registration for roofing contractors)
Common questions
- Do I have to take the California residential contractor exam if I'm licensed in Kansas?
- Yes. California requires the trade exam on this path, plus a law or code exam.
- What does it cost to get a California residential contractor license from Kansas?
- Published fees on this path total $650, not counting exam vendor fees or bonds.
- Do my Kansas work hours count in California?
- Yes. Documented out-of-state experience counts toward California's eligibility requirements.
- Does it work the other way, from California to Kansas?
- Not necessarily. Reciprocity is directed. Going from California to Kansas, the mechanism is not applicable.
Sources
- California Business and Professions Code Sec. 7068 - Qualification of applicants; responsible managing employee; out-of-state experience · Cal. Bus. & Prof. Code Sec. 7068 · California Legislative Information (Office of Legislative Counsel) · Statute · verified September 17, 2026
- CSLB - Application for Original Contractors License · Cal. Bus. & Prof. Code Sec. 7065, 7065.1, 7065.2 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - Bond Requirements · Cal. Bus. & Prof. Code Sec. 7071.6, 7071.8, 7071.9 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - B General Building Contractor classification · Cal. Bus. & Prof. Code Sec. 7057 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - B-2 Residential Remodeling Contractor classification · Cal. Bus. & Prof. Code Sec. 7057.5 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - List of All CSLB Fees · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - Get Licensed to Build: A Guide to Becoming a Licensed Contractor (May 2025) · Contractors State License Board · Other · verified September 17, 2026
- CSLB - Frequently Asked Questions About Journey-level Experience · Contractors State License Board · Faq · verified September 17, 2026
- Contractors State License Law - 2026 CSLB Law Book (B&P Code Division 3, Chapter 9 and 16 CCR Division 8) · Cal. Bus. & Prof. Code Sec. 7065.4, 7068; former Sec. 7067.5 (repealed 2016); 16 CCR Div. 8 · Contractors State License Board · Statute · verified September 17, 2026
- CSLB - Licenses for Limited Liability Companies (LLC) · Cal. Bus. & Prof. Code Sec. 7065, 7071.6.5, 7071.19, 7076.2 · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - If You Already Have a Contractors License From Another State or Country · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - Processing Times · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - Reciprocal Classifications List · Contractors State License Board · Agency Page · verified September 17, 2026
- CSLB - Reciprocity Requirements · Contractors State License Board · Agency Page · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.