LicensebyState

Kansas to Hawaii: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 15 sources

Kansas does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Hawaii's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Out-of-state experience credited toward the four years, full Hawaii examination (every state)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

The Board answers the question directly in its own FAQ: Hawaii has no reciprocity agreements with other states, and all applicants meet the same licensing and examination requirements. There is no verification-of-licensure form, no examination waiver and no NASCLA route, and a license held elsewhere is never exchanged for a Hawaii one. What an out-of-state builder does carry across is the work behind the license. The qualifying person must show four full years of supervisory experience within the past ten years in the classification applied for, and years spent supervising under another state's license count in full: the Board asks for proof of licensure, and an out-of-state contractor who held a license in that state is one of the people who may sign an experience certificate. The paperwork is the same for everyone. At least three notarized experience certificates, at least one for each classification and no two in a classification from the same person, plus a Chronological History of Projects listing every job, the trades subcontracted and the actual on-site supervision time. The Board reviews complete applications at its monthly meeting, then approves the applicant to sit the Hawaii examinations, which must be passed within six months.

Both examination parts are taken for the Class B general building classification: part I on Hawaii building, safety, health, labor and lien law and the administrative principles of contracting, part II on trade knowledge in the classification. Seventy-five percent is the pass mark for each part. The Board's examination page says the examinations moved to PSI Services LLC in January 2023, while the October 2025 requirement sheets still name Prometric; the examination approval letter names the testing agency, the examinations the applicant is eligible for and the date they must be passed by. HAR 16-77-41 excuses an examination only where the applicant previously qualified by written examination within four years and is applying in the same classification, which is about a lapsed Hawaii credential rather than an out-of-state one. Applying for the Class B license at the same time as a Class C specialty license needs a separate part II examination and a separate project list for each classification.

At a glance

Trade exam
Required
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • Four full years of supervisory experience within the ten years immediately before the application, in the classification applied for, at the level of journeyman, foreman, supervisor or contractor, counting only time actually spent on site supervising and directing employees.HRS 444-11(a)(2) lets the Board accept experience acquired on a self-employed or unlicensed basis where it can be verified. Technical training may be approved as acceptable experience but never counts for more than one year. Design time, ordering materials and scheduling around rain-outs or deliveries do not count.
  • Supervisory years worked under another state's contractor license count toward the four years. The Board asks an applicant with licensed experience elsewhere to provide proof of licensure, and an out-of-state contractor who held a license in that state may sign an experience certificate. The proof of licensure does not replace the certificates or the project list.
  • You must have no disciplinary action or unresolved complaints on your record.
  • The qualifying person must be at least eighteen and, unless applying as a sole proprietor, must be employed by the licensed contracting entity as its Responsible Managing Employee. The principal RME must be in residence in Hawaii while the entity's license is in effect or a project is under construction, and a licensee must keep a physical place of business in the State; a post office box is not accepted.

What you'll do to get licensed in Hawaii

  1. 1Law / code exam. Pass a law, rules, or code exam. Part I of the contractor examination: the building, safety, health, labor and lien laws of Hawaii and the basic administrative principles of the contracting business. Seventy-five percent is needed to pass. It is never waived for an out-of-state applicant. The Board strongly recommends obtaining a copy of the contractor licensing law and rules before sitting it..
  2. 2Trade exam. Pass the destination's trade exam. Part II of the contractor examination: trade knowledge in the classification requested, here Class B general building. Seventy-five percent is needed to pass. The applicant registers with the testing agency only after the Board approves the application and issues an examination approval letter, and must pass both parts within six months or file a new application and fee. A failed part may be retaken for a further fee inside that six-month window..
  3. 3Application fee. Pay the application fee ($50). $50 nonrefundable application fee for each application filed, payable to Commerce and Consumer Affairs. More than one classification may be requested on a single application, but a contracting entity and its Responsible Managing Employee file separate applications and pay the fee separately, so an inbound company and its qualifying person pay $50 each. A further $10 contractors education fund fee accompanies every application, and a dishonored payment carries a $25 service charge..
  4. 4Exam fee. Pay the exam fee. Examination fees are paid directly to the testing agency when the approved applicant registers, and are charged for each part taken. The Board's published FAQ lists $75 per part, with most classifications taking both parts, but that document dates from before the examinations moved to PSI Services LLC, so confirm the current amount with PSI on (833) 333-4754 before registering. An interpreter, if the Board approves one, adds $100 to the examination fee..
  5. 5License fee. Pay the license or certificate fee. The Board assesses the license fee after the application is approved and the examinations are passed, telling the applicant the exact amount at that point. Its published FAQ gives $663 for a contracting entity or sole proprietor licensed in the first year of the two-year cycle and $494 in the second, and $438 or $334 on the same split for a Responsible Managing Employee, so budget for both. Licenses run to September 30 of the next even-numbered year whatever date they were issued. On-time renewal currently costs $338 for an entity or sole proprietor, $208 for an RME and $160 for an inactive license, plus $5 education fund and $10 recovery fund fees..
  6. 6Financial responsibility. Show financial responsibility. A current financial statement, dated within one year, that is compiled, reviewed or audited and accompanied by an independent accountant's report from a CPA or public accountant holding a current permit to practice; an accountant licensed in another state attaches a copy of that license. For compiled and reviewed statements the applicant also signs the Board's own Financial Statement form CT-02 whether or not the accountant used it. The Board publishes no minimum net worth or working capital figure: it weighs the statement together with the credit reports and the tax clearance to decide whether the applicant has financial integrity, and whether to impose a bond. RMEs do not file a financial statement; the entity or sole proprietor does..
  7. 7Surety bond. Post a surety bond (if applicable). A surety bond is not automatic in Hawaii. The Board may require one as proof of financial integrity, and sets the amount case by case; the bond form leaves the penal sum blank. Where one is imposed, it runs to the State of Hawaii on form CT-09, is conditioned on compliance with HRS chapter 444 and on paying employees' wages, is continuous, and can be canceled by the surety only on thirty days' written notice. Both the applicant and the surety notarize it. After a licensee has maintained the bond for at least a year it may ask the Board to waive it on proof of financial integrity, supported by current credit reports, financial statements and a tax clearance..
  8. 8Insurance. Carry the required insurance. A certificate of comprehensive liability and property damage insurance with minimum limits of $100,000 bodily injury each person, $300,000 bodily injury each occurrence and $50,000 property damage each occurrence, plus a workers' compensation certificate from a carrier authorized in Hawaii or proof of self-insurance or exclusion. An out-of-state contractor may use a non-admitted carrier where the producer qualifies for an exemption under HRS 431:9A-104(b)(6). Coverage must be continuous for the life of the license: a lapse forfeits both the entity and the RME license automatically, and if it is not restored within sixty days both must apply as new applicants. Certificates are filed fastest through the Board's online insurance submittal system..
  9. 9Business license. Obtain a business license. The contracting entity must be registered with the DCCA Business Registration Division before it can be licensed: a Hawaii corporation or LLC files a stamped copy of its articles, a foreign corporation its certificate of authority and a partnership its registration statement, and an entity registered for more than a year attaches a Certificate of Good Standing issued within the past year. Any trade name must be separately registered and a filed-stamped copy supplied. A current Hawaii tax clearance, issued within six months, is filed with the application and again at every renewal, and the name on it must match the license name exactly..
  10. 10Background check. Complete a background check. A current and complete credit report for each officer, partner, manager or member, issued not more than six months earlier and covering at least the previous five years, showing each current and past debt, its status and any public records; a summary or a bare credit score is not accepted. Where a partner or member is itself a business, the credit reports of its officers or a comprehensive business credit report are filed instead. The RME files a credit report with the RME application as well..
  11. 11Continuing education. Complete continuing education (if applicable). Hawaii imposes no continuing education requirement on contractors. Renewal by September 30 of each even-numbered year instead turns on continued financial integrity: a current tax clearance or payment arrangement, a statement about any liens, undisputed debts or judgments, proof that workers' compensation and liability coverage have been maintained without a break, and proof that any bond the Board imposed is current..
  12. 12Other. The application, fee and every supporting document must reach the Board's Honolulu office on or before the first Tuesday of the month before the meeting at which it will be considered; the Board meets monthly except in December, and faxed or emailed copies are not accepted. An application is abandoned if licensure is not completed within a year of filing or the examinations are not passed after eligibility, and the Board keeps a denied application for two years. A Social Security number must be given or the application is treated as deficient..

Published fees on this path total $50, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Law / code exam
  • Trade exam
  • Exam fee

Surety bond

A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.

  • Surety bond · if applicable

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Continuing education · if applicable

How Hawaii licenses residential contractors

Hawaii residential contractor · “Class B General Building Contractor (no separate residential class)

Statewide license

Verified September 17, 2026· 9 sources

Issued by Hawaii Contractors License Board (DCCA Professional and Vocational Licensing Division)

Hawaii has no residential contractor license. The Contractors License Board, in the Department of Commerce and Consumer Affairs, classifies every contractor into exactly three branches under HRS 444-7: Class A general engineering, Class B general building and Class C specialty. Houses fall inside Class B, which covers any structure built for the support, shelter and enclosure of persons or property whose construction uses more than two unrelated building trades, so a homebuilder in Hawaii holds the same license as a commercial builder and this page points at Class B for both levels. Two limits are worth knowing. A Class B license does not let the holder take a contract that needs only one or two unrelated trades unless the holder also carries the matching Class C specialty license, and it never covers electrical or plumbing work, which needs both the C-13 or C-37 classification and an individually licensed electrician or plumber. The license is entity-held and qualified by a named person: a corporation, partnership, joint venture, LLC or LLP is licensed only while it employs a licensed Responsible Managing Employee, the RME sits the examinations and proves the experience, and the two file separate applications and pay separate fees. An individual who will trade in their own name applies instead as a licensed sole proprietor.

Moving to HawaiiLeaving Hawaii

Why Kansas has nothing to transfer

Kansas residential contractor · “Residential contractor license (Class C in most Kansas jurisdictions)

Licensed by cities and counties

Verified September 17, 2026· 19 sources

Issued by No state authority; cities and counties license residential contractors

Kansas issues no statewide residential builder, home builder or home improvement contractor license, and it has no state contractor board or state contractor exam. Cities and counties license builders instead, and most of the larger ones use the same shape: a company-held license qualified by a named person, in classes lettered A for unlimited work, B for buildings up to three stories and C for houses and duplexes. What the legislature did do is standardize the test. K.S.A. 12-1556 designates a set of standard examinations for 'general contractors, building contractors and residential contractors', and K.S.A. 12-1557 requires any Kansas city or county that licenses builders to set a 75 percent passing score, to charge a uniform examination fee and to accept the resulting certificate of competency 'without additional examination' anywhere else in the state that licenses contractors. In practice that means the credential Kansas jurisdictions care about is a passing score on the ICC Kansas contractor examination series - 550 for the Class A general building contractor, 551 for Class B and 552 for Class C residential - rather than a license held anywhere else. A residential builder moving to Kansas therefore has no state license to transfer and nothing to reciprocate into; the practical work is sitting the Kansas standard examination once, then licensing the business in each place where it will pull permits. The state does license two things a residential builder touches: roofing contractors, who must register with the Kansas Attorney General under the Kansas Roofing Registration Act before selling roofing services for a fee, and mobile home installers.

How local licensing works in Kansas

How local licensing works. Every Kansas contractor license is issued by a city or a county, and the license belongs to the company rather than to the person; the company names a qualifying individual or qualifying party who supplies the examination result or degree, and losing that person usually inactivates the license. Two state statutes shape what the jurisdictions may ask. K.S.A. 12-1557 caps the examination at the designated standard test, sets the passing score at 75 percent, and makes the certificate of competency from that test valid for licensure 'without additional examination' in any other Kansas county or city that licenses contractors. K.S.A. 12-1558 lets a jurisdiction use a different examination instead, but a license granted on a non-standard examination does not authorize work outside that jurisdiction 'except when authorized by reciprocal agreement between the political subdivisions involved' - so the only contractor reciprocity Kansas law contemplates is between Kansas cities and counties, never with another state. None of the jurisdictions below gives any credit for a contractor license issued outside Kansas.

Johnson County (Overland Park, Olathe, Lenexa, Leawood, Shawnee and the rest of the county). Johnson County Contractor Licensing, a division of Planning, Housing and Community Development, issues and tracks eleven license types for the whole county. Building permits are issued by Johnson County Building Codes in the unincorporated county and by each city elsewhere, and the county's own application states the rule plainly: 'When a building permit is issued in the company/firm's name, the company/firm must comply with Johnson County Contractor Licensing Regulations (Resolution 076-24) and be subject to the jurisdiction of the Johnson County Contractor Licensing Review Board.' The residential class is Class C, which 'shall entitle the holder thereof to construct, remodel, repair, and demolish single-family or duplex residences and buildings accessory thereto', including framing, roofing, swimming pool construction, non-structural remodeling and repairs, but not HVAC, plumbing, electrical or fire protection work, which need the separate DM, DP, DE and DF or DFA licenses. Qualification is ICC exam 552 or KGC, Standard Residential Building Contractor, at 75 percent or better, or a Bachelor of Science or higher in architecture, relevant engineering, construction science or construction management from an ABET or ACCE accredited program. The company must designate a qualifying individual who works at least 30 hours a week for it, and every qualifying individual needs eight hours of approved continuing education a year for the company to renew. Insurance is $1,000,000 combined single limit per occurrence plus $1,000,000 completed operations, with the county named as certificate holder and 30 days' notice of any reduction, plus workers' compensation with $100,000 employer's liability or a notarized waiver if there are no employees. A Certificate of Good Standing is needed from the Secretary of State where the company is registered. Fees are a $100 application fee plus $225 per license type, so a single new license is $325; renewal is $225 per type with a $75 late fee from February 1. New applications cannot be filed online. Licenses are valid for one year. 111 S. Cherry Street, Suite 1000, Olathe; 913-715-2233 option 1.

Wichita and Sedgwick County. The Metropolitan Area Building and Construction Department licenses contractors for unincorporated Sedgwick County, the City of Wichita and the small cities it serves, and its position on outside credentials is explicit: 'MABCD does not reciprocate with other jurisdictions.' The residential general class is Class C - Residential, and there is also a Class D Residential Maintenance license; general contractor licenses run two years and expire on December 31 of each even year, with a grace period to January 31. The qualified person must produce 'a copy of Kansas Standard ICC exam' with a score of 75 percent or better, and must file an ICC test release form if the examination was taken outside Kansas. Two-year license fees are $1,000 for Class A, $600 for Class B, $450 for Class C Residential and $360 for Class D Residential Maintenance, roofing, siding, roofing and siding, swimming pool, wrecking, cell tower, fire sprinkler and 'not otherwise classified'; a new application costs an extra $50, and late renewal adds 25 percent in February and 50 percent after that. The filing also needs liability insurance of at least $300,000 naming MABCD as certificate holder in the exact company name, a workers' compensation certificate or a notarized waiver, an auto certificate or a notarized waiver, a Certificate of Good Standing from the Kansas Secretary of State unless the applicant is a sole proprietor, a qualified person declaration page, a company officers signature page and a letter authorizing the qualified person to bind the company in contracts. Roofing applicants must show their Kansas Attorney General roofer registration number. Review takes up to two weeks. 271 W. 3rd, Suite 101, Wichita; 316-660-1840, by appointment.

Kansas City, Kansas and Wyandotte County. The Unified Government works differently from the rest of the state: it does not run a competency license for builders. 'General contractors and subcontractors are required to obtain a city occupational tax license (Business License) if working within Wyandotte County', which is handled by Business Licensing on (913) 573-8780, while 'trade masters are required to carry a master's license with Building Inspections', earned on a Prometric or equivalent standard examination and administered through the Neighborhood Resource Center. A remodeler or homebuilder working in Kansas City, Kansas therefore registers and pays the occupational tax rather than qualifying a person, and makes sure the electrical, mechanical and plumbing scope is performed by licensed masters. Building Inspection and the License Department are both at 4601 State Avenue, Indian Springs Marketplace; Building Inspection (913) 573-8620.

Topeka. The Development Services Division 'is responsible for issuing all contractor and trade licenses in the City of Topeka', and 'all trades are required to be licensed and pull permits to work in City of Topeka.' The residential class is Class C, qualified by ICC exam 552, the Kansas Standard Residential Building Contractor examination, at 75 percent or better; Class B uses exam 551 and Class A exam 550. Topeka will also accept results from Prometric, Thomson-Prometric, Experior, NAI-Block and Block at 75 percent or better, subject to review, or an official transcript for at least 30 hours of coursework from an accredited school in construction science, engineering or architecture, in which case the degree holder becomes the qualifying party and must work for the company full time. The application is filed with the exam or educational certification, a qualifying party verification form, the Renovate Right form, a general liability certificate and a workers' compensation certificate or notarized affidavit, all naming City of Topeka Development Services, 620 SE Madison Unit 6, as certificate holder; processing takes up to ten days. Class A, B and C holders need eight hours of continuing education a year, licenses renew by December 14 each year, fees are not prorated, a lapse in the insurance certificate costs $30 to reinstate after a 30-day grace period, and an unreported address change costs $10. Roofers must supply their Kansas Attorney General roofer registration certificate number before Topeka will license them. The city does not publish its general contractor license fee online - ask Development Services on 785-368-3905 for the current amount before applying.

Lawrence. Chapter 5, Article 15 of the City Code requires a Lawrence contractor license before anyone may 'undertake or perform any action in the City for which a Building Permit is required.' The residential class is Class C, Residential Contractor, covering any permitted work 'on any detached dwelling or duplex'; Class B covers structures up to three stories and Class A everything. Class C needs two years of qualifying experience performing Class C work, or a valid Class D license plus four years as a licensed Class D contractor, and experience claims must be verified by a licensed contractor, building official, architect or engineer. Competency is shown by a certificate of competency from a nationally recognized testing institution of the kind contemplated by K.S.A. 12-1556, by a bachelor's degree in engineering, architecture or construction science, or 'an equivalent Contractor License from another jurisdiction with whom the City has an existing and valid reciprocity agreement' - the ordinance provides for such agreements but names none, so ask Building Inspections whether one covers your jurisdiction before relying on it. Fees are a $75 application fee for each applicant and each qualifying party plus a $75 annual license fee. Insurance is commercial general liability of not less than $1,000,000 per occurrence including completed operations, written by a Kansas-licensed insurer, plus workers' compensation. The Building Official decides within 30 days. The license is company-held, each qualifying party must be a principal or an employee working more than 30 hours a week, and any change of company name, ownership or qualifying party voids the license and requires a new one. Renewal needs eight hours of construction-related continuing education a year for every qualifying party, all delinquent fees paid and all inactive open permits closed or extended. Separate Class E licenses cover mechanical, plumbing, electrical and fireplace work, and those trades also need certified master or journeyman tradespeople. (785) 832-7700.

Everywhere else. Kansas has hundreds of other cities and counties, each free to license builders, to license only the trades, or to require nothing beyond a permit and proof of insurance. Find the building department with jurisdiction over the address and ask before you bid. Two obligations follow you across the whole state whatever the local answer: register with the Kansas Attorney General before providing roofing services for a fee unless you qualify as an exempt general contractor, and hold or employ the right trade credentials for any electrical, plumbing or mechanical work.

Moving to KansasLeaving Kansas

Common questions

Do I have to take the Hawaii residential contractor exam if I'm licensed in Kansas?
Yes. Hawaii requires the trade exam on this path, plus a law or code exam.
What does it cost to get a Hawaii residential contractor license from Kansas?
Published fees on this path total $50, not counting exam vendor fees or bonds.
Do my Kansas work hours count in Hawaii?
Yes. Documented out-of-state experience counts toward Hawaii's eligibility requirements.
Does it work the other way, from Hawaii to Kansas?
Not necessarily. Reciprocity is directed. Going from Hawaii to Kansas, the mechanism is not applicable.

Sources

  1. Contractors License Board Application Forms and Publications - DCCA Hawaii · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
  2. Contractors License Board - Hawaii Department of Commerce and Consumer Affairs · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
  3. Bond Form - Contractors License (form CT-09, rev. 09/2013) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  4. Description of Contractor License Classifications - Hawaii Contractors License Board · Hawaii DCCA, Contractors License Board · Other · verified September 17, 2026
  5. Contractors License Board Examination - Application Deadline and Examination Dates · Hawaii DCCA, Professional and Vocational Licensing Division · Agency Page · verified September 17, 2026
  6. Contractor Frequently Asked Questions - Hawaii Contractors License Board · Hawaii DCCA, Professional and Vocational Licensing Division · Faq · verified September 17, 2026
  7. Contractors Financial Statement (prescribed form CT-02, rev. 11/2017) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  8. Requirements for License - Contractor, Entity (Form CT-00, rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  9. Requirements for License - Contractor, Responsible Managing Employee (Form CT-00(A), rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  10. Requirements for License - Contractor, Sole Proprietor (rev. 10/2025) · Hawaii DCCA, Contractors License Board · Form · verified September 17, 2026
  11. Hawaii Administrative Rules Title 16, Chapter 77 - Contractors · HAR 16-77-6, 16-77-8, 16-77-11, 16-77-12, 16-77-28, 16-77-32, 16-77-33, 16-77-35, 16-77-39 to 16-77-46, 16-77-54, 16-77-55, 16-77-71, 16-77-76, 16-77-89 · Hawaii DCCA, Contractors License Board · Admin Rule · verified September 17, 2026
  12. HRS 444-11 - No license issued when (contractor qualifications) · HRS 444-11 · Hawaii State Legislature · Statute · verified September 17, 2026
  13. HRS 444-7 - Classification (contractors) · HRS 444-7 · Hawaii State Legislature · Statute · verified September 17, 2026
  14. HRS 444-9 - Licenses required (contractors) · HRS 444-9 · Hawaii State Legislature · Statute · verified September 17, 2026
  15. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related