Kansas to Wisconsin: residential contractor license reciprocity
Kansas does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Wisconsin's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
No credit for an out-of-state contractor license (every state)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
Wisconsin publishes no reciprocity, endorsement or exam-waiver route for contractors, and a residential builder's license from another state earns no credit toward either Wisconsin credential. The only reciprocity provision in the DSPS trades rules, SPS 305.47, is limited to electricians and electrical contractors under Wis. Stat. 101.874, and the service-member and spouse reciprocal credential in Wis. Stat. 440.09 reaches only credentials issued under chapters 440 to 480, which does not include these chapter 101 trades certifications. There is also nothing to waive on the examination side: DSPS administers no examination for the dwelling credentials, and the fee table in SPS 305.02 carries no examination fee for any of them. An applicant arriving from any state therefore takes exactly the route a Wisconsin resident takes: 12 hours of an approved initial qualifier course finished within the year before applying for the Qualifier certification, and bond or liability insurance plus the worker's compensation and unemployment compensation attestations for the Dwelling Contractor certification, both filed in LicensE at license.wi.gov. Wisconsin sets no minimum years of experience and no apprenticeship for either credential, so documented out-of-state work neither shortens nor replaces a step, and several approved qualifier courses are delivered online, which means the course can be taken before the move.
The law exam flag here means the tests built into the approved 12-hour initial qualifier course, which Wis. Admin. Code SPS 305.315(2)(c) requires to cover construction laws, construction codes and construction business practices. DSPS itself gives no proctored trade or business-and-law examination for these credentials. Wis. Stat. 101.654(1m)(b)3. separately provides for an examination developed by the department on the required continuing education courses for anyone who did not hold a certificate of financial responsibility on 11 April 2006; SPS 305.02's fee table shows no examination fee for the dwelling credentials and neither DSPS form mentions a test date, so ask DSPS on (608) 266-2112 how that provision is applied before you plan around it. Wis. Stat. 101.654(3)(a)3., added in 2021, also requires 12 hours of department-approved education on accounting, lien law, ethics and best business practices for the certificate of financial responsibility; the Dwelling Contractor page and Form 3096 describe only the financial-responsibility and attestation items, so confirm with DSPS which course satisfies it. A contractor who already holds a current DSPS trades license and pulls a permit for work that license covers is exempt from the continuing education requirement under Wis. Stat. 101.654(1)(c)2.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Do not count
What you must already have
- The approved 12-hour initial qualifier course in dwelling construction must have been completed within one year before the date of the Dwelling Contractor Qualifier application. A course finished earlier than that does not count and has to be retaken.Wis. Admin. Code SPS 305.315(2)(c) and DSPS Form 3097. Verification of completion is uploaded with the application in LicensE.
- Wisconsin sets no minimum trade experience, apprenticeship or period of prior licensure for either dwelling credential, and credits nothing toward them for an out-of-state contractor license, an out-of-state examination or documented out-of-state projects.Neither Wis. Stat. 101.654 nor Wis. Admin. Code SPS 305.31 and SPS 305.315 contains an experience requirement or an out-of-state recognition clause, and DSPS Forms 3096 and 3097 list no experience table and no reciprocity category. Wisconsin also does not accept the NASCLA Accredited Examination, which is not surprising given that it holds no examination of its own here.
- The Dwelling Contractor certification is applied for by a named principal: the owner of the contracting business, a partner applying on behalf of a partnership, or the chairman of the board or chief executive officer applying on behalf of a corporation.Wis. Admin. Code SPS 305.31(3)(b) and DSPS Form 3096, item 2. Under SPS 305.02(4)(a) a business operating from several locations under one federal employer identification number needs only one dwelling contractor certification.
What you'll do to get licensed in Wisconsin
- 1Law / code exam. Pass a law, rules, or code exam. At least 12 hours in a DSPS-approved initial qualifier course in dwelling construction, completed within one year before the Dwelling Contractor Qualifier application. The course must include instruction and one or more tests on construction laws, construction codes and construction business practices. DSPS publishes a list of approved course providers rather than individual courses, and directs questions about a course to the provider; several providers deliver the 12 hours online, so it can be finished before you move to Wisconsin. DSPS holds no examination of its own for this credential and charges no examination fee for it..
- 2Application fee. Pay the application fee ($15). Application fee for the Dwelling Contractor Qualifier certification, set at $15 by Wis. Admin. Code SPS 305.02, Table 305.02. Fees are calculated and paid in LicensE at license.wi.gov when the application is filed..
- 3License fee. Pay the license or certificate fee ($30). Certification fee for the Dwelling Contractor Qualifier, $30 under Table 305.02. The Qualifier certification runs for two years from the date of issuance (Table 305.06) and renews for $30, with a $25 late continuing education fee where that applies and a $200 reinstatement fee if it has lapsed..
- 4Application fee. Pay the application fee ($15). Application fee for the Dwelling Contractor certification, set at $15 by Table 305.02. It is separate from the Qualifier application fee, because a contractor who is both the business principal and the qualifier is applying for two credentials..
- 5License fee. Pay the license or certificate fee ($25). Certification fee for the Dwelling Contractor certification, $25 under Table 305.02, and the same $25 for the Dwelling Contractor Restricted version. The certification is valid for one year from the date of issuance and renews annually for $25; a certification expired more than a year needs a fresh application, supporting documents and a $200 reinstatement fee..
- 6Insurance. Carry the required insurance. Proof of financial responsibility, satisfied either by a general liability policy insuring the applicant for at least $250,000 per occurrence for bodily injury to or death of others or damage to the property of others, or by the surety bond below. The insurer must be authorized to do business in Wisconsin or eligible as a surplus lines insurer in one or more states. The policy may not be canceled except on 30 days' written notice to DSPS, or 10 days for nonpayment of premium, and proof of replacement cover must be filed inside that window or DSPS suspends the certification without a hearing. The application also carries attestations that the business complies with Wisconsin worker's compensation law (Wis. Stat. ch. 102) and unemployment compensation law (Wis. Stat. ch. 108)..
- 7Surety bond. Post a surety bond (if applicable). A surety bond endorsed by a company authorized to do business in Wisconsin is the alternative to the liability policy. DSPS's Form 3096 asks for a bond of at least $25,000 for the full Dwelling Contractor certification; the statutory floor in Wis. Stat. 101.654(2)(a)1. is $5,000, and an applicant using a bond of less than $25,000 is issued the Dwelling Contractor Restricted certification instead and agrees not to work on any dwelling whose estimated cost of completion is greater than the bond amount. The bond runs in the name of the state for the benefit of anyone who suffers a loss from a breach of the one- and two-family dwelling code, and carries the same 30-day cancellation notice rule as the insurance policy..
- 8Continuing education. Complete continuing education. At least 12 hours of DSPS-approved continuing education before the Qualifier certification expires. Wis. Stat. 101.654(1m)(b)1. requires those 12 hours every two years and requires at least 4 of them to be on construction laws and codes and on contracts, liability and risk management. Credit comes from seminars and workshops attended in person or by remote classroom, from teaching a program (first offering only), from webinars and other distance courses, and from technical or professional society meetings, which are capped at 6 hours per renewal cycle. A distance course needs at least 10 review questions per credit hour, and a question-and-answer course at least 30 questions per credit hour with a passing score of 70 percent. DSPS may approve continuing education courses offered by other states..
- 9Background check. Complete a background check. DSPS Form 2255, Trades Convictions and Pending Charges, is filed with the application where it applies. Wis. Stat. 101.654(5) lets the department revoke or suspend the certification for a conviction of a crime related to the construction of a dwelling, for building without a required permit, for failing the continuing education requirement, or for having been adjudged bankrupt on two or more occasions..
- 10Other. Both applications are filed in the LicensE portal at license.wi.gov, with the initial qualifier course verification and the bond or insurance certificate uploaded there; anything DSPS asks for later must be uploaded within three months or the application may have to be refiled and the fees paid again. Once certified, the holder may not start construction until the uniform building permit under SPS 320.08 is issued by the municipality, and may not start a private onsite wastewater treatment system until the sanitary permit under SPS 383.21 is issued. Milwaukee adds a City of Milwaukee Home Improvement Contractor License for work on single-family homes, duplexes and apartment buildings of six units or fewer, so check the requirements of the city or county that will issue your permits as well..
Published fees on this path total $85, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Law / code exam
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · if applicable
Continuing education
Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.
- Continuing education
How Wisconsin licenses residential contractors
Wisconsin residential contractor · “Dwelling Contractor certification, with a Dwelling Contractor Qualifier”
Statewide license
Issued by Wisconsin Department of Safety and Professional Services (DSPS)
Wisconsin licenses housebuilding statewide through the Department of Safety and Professional Services, and it takes two separate credentials rather than one. Under Wis. Admin. Code SPS 305.31 no person may obtain a building permit for a one- or two-family dwelling unless that person holds a Dwelling Contractor certification (or a Dwelling Contractor Restricted certification) and holds, or employs, someone who holds a Dwelling Contractor Qualifier certification. The Dwelling Contractor certification is the business-side credential: it is applied for by the owner of the contracting business, a partner on behalf of a partnership, or the chairman of the board or chief executive officer on behalf of a corporation, and it is granted on attestations of worker's compensation and unemployment compensation compliance plus proof of financial responsibility, which is either a surety bond or a general liability policy of at least $250,000 per occurrence. The Dwelling Contractor Qualifier certification is the personal credential and the one that carries the coursework and the testing: the applicant must have completed at least 12 hours in a DSPS-approved initial qualifier course in dwelling construction within the year before applying, and that course must include one or more tests on construction laws, construction codes and construction business practices. A contractor moving to Wisconsin to build or remodel houses normally needs both, files both in the LicensE portal at license.wi.gov, and should note that these credentials reach one- and two-family dwellings only. Wisconsin issues no state license for general or commercial building work, and a homeowner who lives or will live in the dwelling is exempt from the Dwelling Contractor requirement for work on their own home.
Why Kansas has nothing to transfer
Kansas residential contractor · “Residential contractor license (Class C in most Kansas jurisdictions)”
Licensed by cities and counties
Issued by No state authority; cities and counties license residential contractors
Kansas issues no statewide residential builder, home builder or home improvement contractor license, and it has no state contractor board or state contractor exam. Cities and counties license builders instead, and most of the larger ones use the same shape: a company-held license qualified by a named person, in classes lettered A for unlimited work, B for buildings up to three stories and C for houses and duplexes. What the legislature did do is standardize the test. K.S.A. 12-1556 designates a set of standard examinations for 'general contractors, building contractors and residential contractors', and K.S.A. 12-1557 requires any Kansas city or county that licenses builders to set a 75 percent passing score, to charge a uniform examination fee and to accept the resulting certificate of competency 'without additional examination' anywhere else in the state that licenses contractors. In practice that means the credential Kansas jurisdictions care about is a passing score on the ICC Kansas contractor examination series - 550 for the Class A general building contractor, 551 for Class B and 552 for Class C residential - rather than a license held anywhere else. A residential builder moving to Kansas therefore has no state license to transfer and nothing to reciprocate into; the practical work is sitting the Kansas standard examination once, then licensing the business in each place where it will pull permits. The state does license two things a residential builder touches: roofing contractors, who must register with the Kansas Attorney General under the Kansas Roofing Registration Act before selling roofing services for a fee, and mobile home installers.
How local licensing works in Kansas
How local licensing works. Every Kansas contractor license is issued by a city or a county, and the license belongs to the company rather than to the person; the company names a qualifying individual or qualifying party who supplies the examination result or degree, and losing that person usually inactivates the license. Two state statutes shape what the jurisdictions may ask. K.S.A. 12-1557 caps the examination at the designated standard test, sets the passing score at 75 percent, and makes the certificate of competency from that test valid for licensure 'without additional examination' in any other Kansas county or city that licenses contractors. K.S.A. 12-1558 lets a jurisdiction use a different examination instead, but a license granted on a non-standard examination does not authorize work outside that jurisdiction 'except when authorized by reciprocal agreement between the political subdivisions involved' - so the only contractor reciprocity Kansas law contemplates is between Kansas cities and counties, never with another state. None of the jurisdictions below gives any credit for a contractor license issued outside Kansas.
Johnson County (Overland Park, Olathe, Lenexa, Leawood, Shawnee and the rest of the county). Johnson County Contractor Licensing, a division of Planning, Housing and Community Development, issues and tracks eleven license types for the whole county. Building permits are issued by Johnson County Building Codes in the unincorporated county and by each city elsewhere, and the county's own application states the rule plainly: 'When a building permit is issued in the company/firm's name, the company/firm must comply with Johnson County Contractor Licensing Regulations (Resolution 076-24) and be subject to the jurisdiction of the Johnson County Contractor Licensing Review Board.' The residential class is Class C, which 'shall entitle the holder thereof to construct, remodel, repair, and demolish single-family or duplex residences and buildings accessory thereto', including framing, roofing, swimming pool construction, non-structural remodeling and repairs, but not HVAC, plumbing, electrical or fire protection work, which need the separate DM, DP, DE and DF or DFA licenses. Qualification is ICC exam 552 or KGC, Standard Residential Building Contractor, at 75 percent or better, or a Bachelor of Science or higher in architecture, relevant engineering, construction science or construction management from an ABET or ACCE accredited program. The company must designate a qualifying individual who works at least 30 hours a week for it, and every qualifying individual needs eight hours of approved continuing education a year for the company to renew. Insurance is $1,000,000 combined single limit per occurrence plus $1,000,000 completed operations, with the county named as certificate holder and 30 days' notice of any reduction, plus workers' compensation with $100,000 employer's liability or a notarized waiver if there are no employees. A Certificate of Good Standing is needed from the Secretary of State where the company is registered. Fees are a $100 application fee plus $225 per license type, so a single new license is $325; renewal is $225 per type with a $75 late fee from February 1. New applications cannot be filed online. Licenses are valid for one year. 111 S. Cherry Street, Suite 1000, Olathe; 913-715-2233 option 1.
Wichita and Sedgwick County. The Metropolitan Area Building and Construction Department licenses contractors for unincorporated Sedgwick County, the City of Wichita and the small cities it serves, and its position on outside credentials is explicit: 'MABCD does not reciprocate with other jurisdictions.' The residential general class is Class C - Residential, and there is also a Class D Residential Maintenance license; general contractor licenses run two years and expire on December 31 of each even year, with a grace period to January 31. The qualified person must produce 'a copy of Kansas Standard ICC exam' with a score of 75 percent or better, and must file an ICC test release form if the examination was taken outside Kansas. Two-year license fees are $1,000 for Class A, $600 for Class B, $450 for Class C Residential and $360 for Class D Residential Maintenance, roofing, siding, roofing and siding, swimming pool, wrecking, cell tower, fire sprinkler and 'not otherwise classified'; a new application costs an extra $50, and late renewal adds 25 percent in February and 50 percent after that. The filing also needs liability insurance of at least $300,000 naming MABCD as certificate holder in the exact company name, a workers' compensation certificate or a notarized waiver, an auto certificate or a notarized waiver, a Certificate of Good Standing from the Kansas Secretary of State unless the applicant is a sole proprietor, a qualified person declaration page, a company officers signature page and a letter authorizing the qualified person to bind the company in contracts. Roofing applicants must show their Kansas Attorney General roofer registration number. Review takes up to two weeks. 271 W. 3rd, Suite 101, Wichita; 316-660-1840, by appointment.
Kansas City, Kansas and Wyandotte County. The Unified Government works differently from the rest of the state: it does not run a competency license for builders. 'General contractors and subcontractors are required to obtain a city occupational tax license (Business License) if working within Wyandotte County', which is handled by Business Licensing on (913) 573-8780, while 'trade masters are required to carry a master's license with Building Inspections', earned on a Prometric or equivalent standard examination and administered through the Neighborhood Resource Center. A remodeler or homebuilder working in Kansas City, Kansas therefore registers and pays the occupational tax rather than qualifying a person, and makes sure the electrical, mechanical and plumbing scope is performed by licensed masters. Building Inspection and the License Department are both at 4601 State Avenue, Indian Springs Marketplace; Building Inspection (913) 573-8620.
Topeka. The Development Services Division 'is responsible for issuing all contractor and trade licenses in the City of Topeka', and 'all trades are required to be licensed and pull permits to work in City of Topeka.' The residential class is Class C, qualified by ICC exam 552, the Kansas Standard Residential Building Contractor examination, at 75 percent or better; Class B uses exam 551 and Class A exam 550. Topeka will also accept results from Prometric, Thomson-Prometric, Experior, NAI-Block and Block at 75 percent or better, subject to review, or an official transcript for at least 30 hours of coursework from an accredited school in construction science, engineering or architecture, in which case the degree holder becomes the qualifying party and must work for the company full time. The application is filed with the exam or educational certification, a qualifying party verification form, the Renovate Right form, a general liability certificate and a workers' compensation certificate or notarized affidavit, all naming City of Topeka Development Services, 620 SE Madison Unit 6, as certificate holder; processing takes up to ten days. Class A, B and C holders need eight hours of continuing education a year, licenses renew by December 14 each year, fees are not prorated, a lapse in the insurance certificate costs $30 to reinstate after a 30-day grace period, and an unreported address change costs $10. Roofers must supply their Kansas Attorney General roofer registration certificate number before Topeka will license them. The city does not publish its general contractor license fee online - ask Development Services on 785-368-3905 for the current amount before applying.
Lawrence. Chapter 5, Article 15 of the City Code requires a Lawrence contractor license before anyone may 'undertake or perform any action in the City for which a Building Permit is required.' The residential class is Class C, Residential Contractor, covering any permitted work 'on any detached dwelling or duplex'; Class B covers structures up to three stories and Class A everything. Class C needs two years of qualifying experience performing Class C work, or a valid Class D license plus four years as a licensed Class D contractor, and experience claims must be verified by a licensed contractor, building official, architect or engineer. Competency is shown by a certificate of competency from a nationally recognized testing institution of the kind contemplated by K.S.A. 12-1556, by a bachelor's degree in engineering, architecture or construction science, or 'an equivalent Contractor License from another jurisdiction with whom the City has an existing and valid reciprocity agreement' - the ordinance provides for such agreements but names none, so ask Building Inspections whether one covers your jurisdiction before relying on it. Fees are a $75 application fee for each applicant and each qualifying party plus a $75 annual license fee. Insurance is commercial general liability of not less than $1,000,000 per occurrence including completed operations, written by a Kansas-licensed insurer, plus workers' compensation. The Building Official decides within 30 days. The license is company-held, each qualifying party must be a principal or an employee working more than 30 hours a week, and any change of company name, ownership or qualifying party voids the license and requires a new one. Renewal needs eight hours of construction-related continuing education a year for every qualifying party, all delinquent fees paid and all inactive open permits closed or extended. Separate Class E licenses cover mechanical, plumbing, electrical and fireplace work, and those trades also need certified master or journeyman tradespeople. (785) 832-7700.
Everywhere else. Kansas has hundreds of other cities and counties, each free to license builders, to license only the trades, or to require nothing beyond a permit and proof of insurance. Find the building department with jurisdiction over the address and ask before you bid. Two obligations follow you across the whole state whatever the local answer: register with the Kansas Attorney General before providing roofing services for a fee unless you qualify as an exempt general contractor, and hold or employ the right trade credentials for any electrical, plumbing or mechanical work.
- Johnson County Contractor Licensing (Class C Residential; covers Overland Park, Olathe, Lenexa, Leawood and Shawnee)
- Wichita and Sedgwick County (MABCD - Class C Residential and Class D Residential Maintenance licenses)
- Kansas City, Kansas and Wyandotte County (occupational tax business license; trade master licenses)
- Topeka (Development Services - Class A, B and C general contractor licenses)
- Lawrence (Planning and Development Services - Class C Residential Contractor license under City Code ch. 5, art. 15)
- Kansas Attorney General - Roofing Registration (statewide registration for roofing contractors)
Common questions
- Do I have to take the Wisconsin residential contractor exam if I'm licensed in Kansas?
- The trade exam is waived, but Wisconsin requires a law or code exam.
- What does it cost to get a Wisconsin residential contractor license from Kansas?
- Published fees on this path total $85, not counting exam vendor fees or bonds.
- Do my Kansas work hours count in Wisconsin?
- No. Wisconsin does not credit out-of-state hours on this path.
- Does it work the other way, from Wisconsin to Kansas?
- Not necessarily. Reciprocity is directed. Going from Wisconsin to Kansas, the mechanism is not applicable.
Sources
- City of Milwaukee Department of Neighborhood Services - Contractors: credentials required before permit issuance · Milwaukee Code of Ordinances 95-14 · City of Milwaukee Department of Neighborhood Services · Other · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- NASCLA Accredited Examination for Commercial General Building Contractors - participating state agencies · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- Wisconsin DSPS - Approved Dwelling Contractor Qualifier Initial Qualifier Courses (provider list) · Wisconsin Department of Safety and Professional Services · Other · verified September 17, 2026
- Wisconsin DSPS - Dwelling Contractor · Wis. Admin. Code SPS 305.31; Wis. Stat. 101.654(1)(b), (1)(c)2. · Wisconsin Department of Safety and Professional Services · Agency Page · verified September 17, 2026
- Wisconsin DSPS - Dwelling Contractor Qualifier · Wis. Admin. Code SPS 305.31, SPS 305.315; Wis. Stat. 101.654 · Wisconsin Department of Safety and Professional Services · Agency Page · verified September 17, 2026
- Wisconsin DSPS - Dwelling Contractor Restricted · Wis. Admin. Code SPS 305.31; Wis. Stat. 101.654(2m) · Wisconsin Department of Safety and Professional Services · Agency Page · verified September 17, 2026
- Wisconsin DSPS Form 3096 - Dwelling Contractor Application Information · Wisconsin Department of Safety and Professional Services · Form · verified September 17, 2026
- Wisconsin DSPS Form 3097 - Dwelling Contractor Qualifier Application Information · Wisconsin Department of Safety and Professional Services · Form · verified September 17, 2026
- Wisconsin DSPS - Trades Renewal Dates and Fees · Wisconsin Department of Safety and Professional Services · Other · verified September 17, 2026
- Wis. Admin. Code SPS 305.31 Dwelling contractor and SPS 305.315 Dwelling contractor qualifier · Wis. Admin. Code SPS 305.31, SPS 305.315 · Wisconsin Legislature · Admin Rule · verified September 17, 2026
- Wis. Admin. Code ch. SPS 305 - Licenses, Certifications and Registrations (Table 305.02 fees, Table 305.06 terms, SPS 305.47) · Wis. Admin. Code SPS 305.02 Table 305.02; SPS 305.06 Table 305.06; SPS 305.47 · Wisconsin Legislature · Admin Rule · verified September 17, 2026
- Wis. Stat. 101.654 - Contractor certification; education · Wis. Stat. 101.654 · Wisconsin Legislature · Statute · verified September 17, 2026
- Wis. Stat. 440.01 - Definitions (scope of "credential" for the ch. 440 reciprocal-credential provisions) · Wis. Stat. 440.01(2)(a); cf. Wis. Stat. 440.09 · Wisconsin Legislature · Statute · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.