Kentucky to New Mexico: residential contractor license reciprocity
Kentucky does not issue a statewide residential contractor license, so there is nothing to transfer. Here is New Mexico's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Out-of-state residential contractor applying for GB-2 (all states)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
A residential contractor licensed in another state gets no exam waiver and no shortened path to a New Mexico GB-2 license. The only reciprocity the Construction Industries Division publishes is for the EE-98J electrical journeyman certificate, 14.6.3 NMAC contains no endorsement or substantial-equivalence route for a contractor or Qualifying Party, and the NASCLA exam waiver that CID does operate is limited to the GB-98 and EE-98 classifications, not GB-2. What does carry across is the work itself: out-of-state experience counts in full toward the two years (4,000 hours) of foreman-level experience, provided it was gained while employed by a contractor licensed in the trade or was legal work in the state where it was performed, and the out-of-state contractor who signs the notarized affidavit attaches a copy of their own current state license. The applicant files the Qualifying Party application and General Building Work Experience Verification affidavits with PSI, waits for CID or PSI to approve the experience, then passes the GB-2 exam and the Business and Law exam, and the company that will hold the license applies separately with the bond, the tax registration certificate and proof of the Qualifying Party's exams. Statute does let the division enter reciprocal agreements with states having equivalent requirements, but none covering a building classification has been published.
Accredited college, university, manufacturer, vocational or apprenticeship training counts as one-half year of experience per year and may not exceed half of the two-year requirement. Estimating, project management, ordering supplies and supervising do not count as hands-on experience on the affidavit, and the affidavit must state whether the experience was residential or commercial. Once PSI approves the application, every remaining requirement must be met within six months or the fees are forfeited, and the trade exam and the Business and Law exam must both be passed within one year of each other. An exam may not be repeated more than twice in any 30-day period. Military service members, their spouses and dependent children and veterans who are currently licensed and in good standing in another jurisdiction with substantially equivalent requirements have a separate expedited route: CID issues within 30 days and waives the license fees for the first three years. A homeowner-scale exemption exists for an individual doing one project at a time for no more than $7,200 a year in casual or handyman work, but it does not extend to electrical, plumbing or gas fitting and requires an annual declaration to the division.
At a glance
- Trade exam
- Required
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must document at least 4,000 hours of qualifying work experience.Two years (4,000 hours) of foreman-level practical or related trade experience in residential building, gained within the ten years immediately before application (14.6.6.9(B)(1) NMAC; NMSA 60-13-14(B)(8) as reduced by rule). It is documented on notarized General Building Work Experience Verification affidavits, one per employer or affiant, completed by an employer, supervisor, foreman or other contractor rather than by the applicant.
- Experience must have been gained while employed by a contractor licensed in the trade being applied for, or be work that was legal in the state where it was performed. An out-of-state contractor certifying the experience attaches a copy of their current state license to the affidavit; where the state does not license that trade, proof that the company was active and valid, such as a tax certificate or corporation papers, is attached instead.
- The Qualifying Party must be at least 18 and may qualify only one licensed entity unless there is at least thirty percent common ownership between the entities. CID may deny a license or certificate where the applicant or the proposed Qualifying Party has a disqualifying felony conviction, and an applicant denied on that basis may submit written evidence of mitigation or rehabilitation and appeal.
What you'll do to get licensed in New Mexico
- 1Application fee. Pay the application fee ($30). Non-refundable Qualifying Party application fee, paid to PSI with the notarized application and work-experience affidavits. Complete packets go to the PSI Albuquerque office by hand or mail; faxed and emailed forms are not accepted..
- 2Other. Qualifying Party certificate fee, charged for each classification on the application (14.5.5.14(A) NMAC). With the $30 application fee this is the $36 the Construction Industries Division quotes for a single-classification Qualifying Party filing. ($6).
- 3Trade exam. Pass the destination's trade exam. GB-2 Residential Building Contractor exam, administered by PSI once CID or PSI approves the experience affidavits: 80 questions, 225 minutes, open book, 75% (60 points) to pass. Content covers sitework, footings and foundations, concrete and reinforcement, masonry, carpentry, roofing, associated trades, general code, plan reading and estimating, and OSHA safety, against the 2021 New Mexico Residential Building Code (14.7.3 NMAC), the 2021 International Residential Code, the 2021 International Energy Conservation Code and 29 CFR 1926..
- 4Exam fee. Pay the exam fee ($134.53). PSI fee for the GB-2 exam, charged for a first attempt or a retake..
- 5Law / code exam. Pass a law, rules, or code exam. Contractor's Business and Law exam, required of all new Qualifying Party candidates: 50 questions, 130 minutes, open book, 75% (38 points) to pass, covering licensing requirements, estimating and bidding, business organization and financial management, tax and labor law, project management and lien law, contracts, risk management, and environment and safety. An approved Business and Law course taken with a CID-approved vendor may be completed in place of the exam..
- 6Exam fee. Pay the exam fee ($68.88). PSI fee for the Business and Law exam..
- 7Contractor license. Hold or obtain a contractor license ($30). Non-refundable contractor license application fee paid to PSI by the business, filed with the notarized Contractor License Application, a copy of the Qualifying Party's certificate or passing score reports, and the Business and Law score or course certificate. A $6 certificate fee covering the license certificate and two wallet cards is charged with it..
- 8License fee. Pay the license or certificate fee ($300). Classification fee for GB-2, covering the full three-year license term on PSI's current schedule. Adding a GS specialty classification alongside it does not raise the total above $300 for the category. Late renewal costs $1 a day for the first 30 days and the equivalent of one year's fee from 30 to 90 days; after 90 days the license is cancelled and the business must reapply..
- 9Surety bond. Post a surety bond ($10,000). $10,000 code bond from a corporate surety authorized to transact business in New Mexico, issued in the exact name shown on the application and effective for the entire three-year license period. It is the statutory proof of responsibility, may be drawn on only to cure division-certified code violations the licensee has not corrected, and must be kept in force for the whole term; claims are limited to two years after final inspection or issuance of a certificate of occupancy..
- 10Insurance. Carry the required insurance. Workers' compensation coverage is required of every licensed entity, and failure to maintain it is cause for revocation of the license. A sole proprietor with no employees may be exempt; the Workers' Compensation Administration can confirm. An application is placed on hold while the applicant is out of compliance..
- 11Business license. Obtain a business license. A registration certificate issued within the last twelve months by the New Mexico Taxation and Revenue Department in the exact name on the license application, plus proof of registration with the New Mexico Public Regulation Commission for a corporation or LLC, or with the Secretary of State for a limited liability partnership or limited partnership. A corporation, LLC, LP or LLP must be legally authorized to do business in New Mexico before the license issues, and the proposed business name must be cleared with PSI first..
- 12Background check. Complete a background check. CID reviews the application against the disqualifying felony convictions listed in 14.6.3.8(F) NMAC and may deny a license or certificate on that basis; sealed, dismissed, expunged or pardoned convictions and juvenile adjudications are not used. An application is also held where there are pending CID disciplinary actions, a workers' compensation compliance problem, a child support delinquency for the proposed Qualifying Party, or an open unlicensed-activity investigation..
Published fees on this path total $533.41, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam
- Exam fee · $134.53
- Law / code exam
- Exam fee · $68.88
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $10,000
Liability insurance
Some states require proof of general liability or workers' compensation coverage at licensing time.
- Insurance
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How New Mexico licenses residential contractors
New Mexico residential contractor · “GB-2 Residential Building Contractor”
Statewide license
New Mexico licenses homebuilders statewide through the Construction Industries Division of the Regulation and Licensing Department, and the homes-only classification is GB-2 Residential: erect, alter, repair or demolish residences and apartment houses of not more than four family units in occupancy Groups R-1, R-2 and R-3, plus incidental Group U structures and any GS specialty work kept inside that residential scope. Anything commercial, and any residential building beyond four units, needs the GB-98 General Building classification instead. The license is held by a business, not by a person: CID issues it to a qualified entity that employs or is owned by a Qualifying Party, and the Qualifying Party is the individual who documents the experience, sits the exams and holds a personal, non-transferable certificate of qualification, so a builder moving to New Mexico applies first as a Qualifying Party and then for the company license. A GB-2 Qualifying Party needs two years (4,000 hours) of foreman-level practical or related trade experience gained within the ten years before applying, and must pass the GB-2 trade exam and the Contractor's Business and Law exam, or take an approved Business and Law course in place of that exam. Every licensed entity files a $10,000 code bond and carries workers' compensation coverage, and licenses run for three years. CID publishes reciprocity for one credential only, the EE-98J electrical journeyman certificate, so no other state's contractor license is recognized at this level.
Why Kentucky has nothing to transfer
Kentucky residential contractor · “Building or residential contractor license or registration (city- or county-issued)”
Licensed by cities and counties
Issued by No state authority; cities and counties license or register residential building contractors
Kentucky issues no statewide residential building, home builder or home improvement contractor license, so an out-of-state residential builder has nothing at state level to transfer and no state reciprocity to apply for. What Kentucky does license is the trades: the Department of Housing, Buildings and Construction (HBC) says on its own home page that it "licenses/certifies plumbers, electricians, boiler contractors, sprinkler and/or fire alarm contractors and building inspectors", and its administrative regulations in Title 815 add heating, ventilation and air conditioning licensing, elevator safety, boilers and pressure vessels, manufactured homes and home inspectors. Anyone self-performing plumbing, electrical, HVAC, boiler or fire-protection work in Kentucky needs the matching HBC license whatever the local building rules say, and that is where the state-level reciprocity conversation belongs. Housing work itself is licensed jurisdiction by jurisdiction and the rules differ sharply: Louisville Metro issues a Building Type A - Residential contractor license with six hours of continuing education before each renewal, Lexington-Fayette registers a "general contractor, residential only" class under its Contractors Registration Ordinance, and the joint Bowling Green - Warren County Contractors Licensing Board issues a General Contractors License for remodeling and building. Owensboro and Covington sit at the other end: neither publishes a contractor competency license at all, and a builder there files an occupational business license and carries insurance instead. None of these credentials involves a trade or business-law exam, and none of them gives any weight to a license held in another state, so the practical work is registering in each place where permits will be pulled and carrying the insurance each one demands.
How local licensing works in Kentucky
How local licensing works. No Kentucky agency licenses residential builders or remodelers, and there is no state qualifying party, no state exam and no state reciprocity for this work. Each city and county decides for itself, so identify the building department with jurisdiction over the address before applying anywhere. A credential issued by one Kentucky jurisdiction does not carry into the next one, and none of the jurisdictions below grants anything for a license held in another state. Two statewide obligations apply wherever the project is: the HBC license for any self-performed plumbing, electrical, HVAC, boiler or fire-protection work, and compliance with the Kentucky Building Code adopted in 815 KAR Chapter 007.
Louisville Metro (Jefferson County). The Office of Construction Review issues the contractor licenses for the merged city-county. A builder chooses a term and then a scope. License A "lets you work on one or more permitted projects during a calendar year, which runs from January 1st to December 31st"; License B "allows you to work on only one permitted project during a calendar year." The scopes are Building A-Residential, Building A-Residential/Commercial, Building A-Commercial and Building B. Building Type A costs $125 a year and Building Type B $50 per permit, and "only one Building Type B license will be granted per person/company per renewal year." Six continuing education credit hours from a pre-approved list are required before renewal for Building A-R, Building A-RC and Building B, which is to say for everyone whose scope touches houses. The filing is a certificate of liability insurance naming the Office of Construction Review as certificate holder, workers' compensation and unemployment insurance or a signed and notarized affidavit that neither applies, an Occupational License Number from the Revenue Commission of Jefferson County on (502) 574-4860, and the application itself through the Metro business portal. Annual renewals must arrive with current liability insurance, the continuing education records for residential contractors, a workers' compensation form and a subcontractor list, and "any missing items will result in ALL items being returned." There is no exam, no experience requirement and no bond on the building categories; only the wrecking classes carry a written exam, a surety bond and a year of supervisory experience. Office of Construction Review, 444 S. 5th St., Suite 100, (502) 574-3321.
Lexington-Fayette Urban County. The Division of Building Inspection runs a Contractors Registration Ordinance: "this ordinance requires all contractors to register with the Building Inspection" and "unregistered contractors cannot obtain building permits." There are three classes under Ordinance 5-90(a). A general contractor, residential only "constructs up to 4-family homes (4-Plex), performs home remodeling, and may supervise, arrange, and/or perform more than two unrelated building trades or crafts." A general contractor covers everything larger. A specialty contractor "performs commercial, industrial, public works and residential construction and specializes in two or fewer unrelated building trades or crafts." Registration takes four steps: a $10 Home Office Certificate or a $25 Certificate of Occupancy if the business address is in Fayette County; an occupational business license from Revenue at 218 E. Main St., 2nd floor, (859) 258-3340; general liability insurance and workers' compensation with LFUCG as certificate holder, or the "Workers Comp Exempt" declaration on the application if neither applies; and the online Contractor Registration Application through the city's permitting portal with the occupational license and certificate of insurance uploaded. No exam, experience or bond is required for any of the three classes. The division's published fee schedule prices permits rather than registrations and lists no contractor registration fee, so ask Building Inspection for the current amount before filing. 101 E. Vine St., (859) 258-3770, [email protected].
Bowling Green and Warren County. A single joint Contractors Licensing Board licenses for both the city and the county under Ordinance 91-58 WC and Ordinance 91-25 BG. A General Contractors License is needed by anyone "doing any type of general contract work in Bowling Green / Warren County including pulling permits for building or remodeling, construction management, or if you would have two or more subcontractors per job", and costs $250. A Specialty Contractors License covers subcontract work or a job with at most one subcontractor, and costs $100. Both fees are non-refundable and renewals are annual, pro-rated for a mid-year filing. The filing is the application plus a certificate of insurance naming the board as certificate holder, with "a minimum requirement for General Liability Insurance [of] $100,000 per occurrence", workers' compensation coverage shown on the certificate or a notarized Affidavit of Exemption, and a notarized Partnership Agreement for a partnership. Licenses are non-transferable and "any change in ownership nullifies previous licenses." There is no exam and no experience review, and the board says so directly: "the Contractors Licensing Board does not warrant that you are otherwise qualified to perform your trade or specialty by the issuance of its license." A Bowling Green occupational license is also needed for work inside the city limits and a Warren County occupational license for work outside them. Contractors Licensing Board, 1141 State Street, Suite 200, 270-781-3530.
Owensboro and Daviess County. There is no Owensboro contractor license. The Owensboro Metropolitan Planning Commission's Building & Electrical Division "issues all building and electrical permits required by the Kentucky Building Code and National Electrical Code" for Owensboro-Daviess County, along with HVAC, sign and parking lot permits and certificates of occupancy, and it issues no contractor credential of any kind. What a builder needs instead is the city's business registration: "any person, partnership, corporation, or other legal entity must register with the Occupational License Division prior to conducting business inside the city limits", with "a minimum license fee of seventy-five ($75.00) dollars due with registration." New construction draws at least three field inspections - footer and foundation, framing and final - before a certificate of occupancy issues. Occupational License Division, 101 East 4th Street, 270-687-5600.
Covington and Kenton County (Northern Kentucky). Planning and Development Services of Kenton County is the building department for Covington and the surrounding communities, and its rule is short: "when completing work within Kenton County, all contractors must obtain and maintain a Kenton County occupational license and provide proof of Kentucky workers' compensation insurance coverage. In addition, the Kentucky Department of Housing, Buildings, and Construction requires a license for electrical, HVAC, plumbing, and fire suppression work. Contractors must provide copies of all these items before any permits can be issued." There is no residential builder license, exam or bond. In Covington itself a zoning permit from the city, and a certificate of appropriateness where a historic preservation overlay applies, must come before PDS will issue the building permit. PDS, 1840 Simon Kenton Way, Suite 3400, Covington, 859-331-8980; building permits 859-957-2408.
Storm-damaged communities. The Attorney General's Office of Consumer Protection runs joint emergency contractor registration programs with the City of Mayfield and Graves County, the City of Princeton and Caldwell County, the City of Dawson Springs and Hopkins County, and the City of Bremen and Muhlenberg County, "to register contractors looking to assist storm victims." The program "requires contractors to register prior to doing business", and registrants are issued placards that must be displayed on the job site and in the vehicle. It is a consumer-protection registration aimed at transient storm-chasers rather than a skill license, and it applies only in those communities. Details on (502) 871-2424.
Everywhere else. The remaining Kentucky cities and counties each set their own rules, from a full licensing board like Bowling Green's to nothing beyond an occupational license and proof of insurance. Ask the local building department what it requires before bidding, and expect to repeat the filing in each jurisdiction.
- Louisville Metro / Jefferson County (Office of Construction Review - Building Type A and B contractor licenses)
- Lexington-Fayette Urban County (Division of Building Inspection - general contractor, residential only registration)
- Bowling Green and Warren County (joint Contractors Licensing Board - General and Specialty Contractors License)
- Owensboro and Daviess County (Owensboro Metropolitan Planning Commission - permits only; city occupational license)
- Covington and Kenton County (Planning and Development Services of Kenton County - occupational license and insurance only)
Common questions
- Do I have to take the New Mexico residential contractor exam if I'm licensed in Kentucky?
- Yes. New Mexico requires the trade exam on this path, plus a law or code exam.
- What does it cost to get a New Mexico residential contractor license from Kentucky?
- Published fees on this path total $533.41, not counting exam vendor fees or bonds.
- Do my Kentucky work hours count in New Mexico?
- Yes. Documented out-of-state experience counts toward New Mexico's eligibility requirements.
- Does it work the other way, from New Mexico to Kentucky?
- Not necessarily. Reciprocity is directed. Going from New Mexico to Kentucky, the mechanism is not applicable.
Sources
- Construction Industries Licensing Act, NMSA 1978 Chapter 60, Article 13 (RLD compilation as of July 1, 2021) · NMSA 1978 §§ 60-13-3, 60-13-14, 60-13-14.1, 60-13-23, 60-13-49 · New Mexico Regulation and Licensing Department · Statute · verified September 17, 2026
- 14.5.5 NMAC - Construction Industries General Provisions: Fees · 14.5.5.8 and 14.5.5.14 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
- 14.6.3 NMAC - Construction Industries Licensing: Contractor's License Requirements · 14.6.3.8 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
- 14.6.6 NMAC - Construction Industries Licensing: Classifications and Scopes of Work · 14.6.6.8 and 14.6.6.9 NMAC · New Mexico Commission of Public Records, State Records Center and Archives · Admin Rule · verified September 17, 2026
- NM CID - How to Obtain a Contractor License and Contractor License Application (updated October 2023) · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
- State of New Mexico Contractor (Qualifying Party) Examinations Candidate Information Bulletin (PSI) · PSI Services for the NM Construction Industries Division · Other · verified September 17, 2026
- New Mexico Contractor Licensing - Frequently Asked Questions (CID / PSI) · PSI Services for the New Mexico Construction Industries Division · Faq · verified September 17, 2026
- PSI General Building Work Experience Verification - New Mexico Contractor Licensing Service · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
- New Mexico Licensing Fees (CID contractor, qualifying party and journeyman fee schedule) · PSI Services for the New Mexico Construction Industries Division · Other · verified September 17, 2026
- NM CID Qualifying Party Certificate Application and Instructions (instructions updated May 2025, form updated August 2025) · PSI Services for the New Mexico Construction Industries Division · Form · verified September 17, 2026
- NM Regulation and Licensing Department - Apply for a Construction Industries License · New Mexico Regulation and Licensing Department, Construction Industries Division · Agency Page · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.