Kentucky to South Carolina: residential contractor license reciprocity
Kentucky does not issue a statewide residential contractor license, so there is nothing to transfer. Here is South Carolina's standard path for out-of-state applicants.
Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.
Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.
Residential Builder license by exam waiver or by examination (states without a named agreement)
Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.
A residential builder arriving from a state that is not on the Commission’s four-state list still has a waiver route: the Commission waives the Residential Builder technical portion of the examination for anyone who passed the NASCLA Accredited Examination for Commercial General Building Contractors within the past three years, and a copy of the exam transcript goes in with the application. The Business Management and Law portion of the examination and the work experience requirement are not waived on any route. Without the NASCLA credential the applicant sits both portions of the South Carolina Residential Builder examination through PSI, with eligibility good for one year and three attempts in a twelve-month period. Either way the Commission first reviews and approves the work experience, so file the $135 application with the experience affidavits, W-2s or 1099s, the credit report and the $15,000 bond, then pay the $220 license fee once approved. A license obtained on a technical exam waiver is a limited "Residential Builder Exam Waiver" license: mechanical trades work must be subcontracted to an appropriately licensed person or company, and to do that work yourself you must apply by examination instead.
A currently licensed South Carolina General Contractor with the Building (BD) or Limited Building (LB) classification, in good standing and active for a year or longer and obtained by examination, is the third waiver route; Commission staff verify that internally. S.C. Code Section 40-59-220(F) is written more broadly than the Commission’s published routes - it allows a license without examination for applicants licensed in good standing in other states the commission determines to have comparable examinations - but the published routes are the four named states, the South Carolina BD or LB license and the NASCLA exam. The Commission publishes no processing time; an application stays open one year from receipt. Ask at [email protected] or (803) 896-4696.
At a glance
- Trade exam
- Waived
- Law / code exam
- Required
- Out-of-state hours
- Count toward eligibility
What you must already have
- You must have passed a licensing exam in Kentucky that the destination considers comparable.The Commission’s own Residential Builder page and its application instructions both say the technical portion may be waived where the applicant "has passed the NASCLA Commercial General Building Contractor exam within the past 3 years", with a copy of the exam transcript submitted with the application. The NASCLA exam is an examination credential, not a license and not an agreement between two states: anyone may sit it in any participating jurisdiction. It does not waive the Business Management and Law portion, the experience requirement, the bond, the credit report or any fee.
- Your qualifying exam must have been passed within the last 3 years.
- At least one year of actual residential building experience performed within the past five years, under the supervision of a licensed residential builder or another appropriately licensed professional engaged in residential building construction. Experience earned outside South Carolina counts.Documented with copies of W-2s or 1099s from each employer and a Residential Builder Experience Affidavit completed by each supervisor or employer listed on the application; the details on the affidavits must match the application. S.C. Code Section 40-59-220(B) also lets the Commission accept other education or experience, or a combination, and the Commission invites a written explanation with supporting documents where the standard paperwork cannot be produced. The work experience requirement applies on the exam-waiver routes as well as on the examination route.
What you'll do to get licensed in South Carolina
- 1Trade exam. Pass the destination's trade exam (if applicable). Residential Builder technical portion of the South Carolina examination, administered by PSI at https://test-takers.psiexams.com/scrb/. It is required unless the applicant qualifies for a technical exam waiver through the NASCLA Commercial General Building Contractor exam passed within the past three years, a current examined license held a year or more in Alabama, Georgia, Mississippi or North Carolina, or a current South Carolina General Contractor license in the Building (BD) or Limited Building (LB) classification..
- 2Law / code exam. Pass a law, rules, or code exam. Business Management and Law portion of the South Carolina Residential Builder examination, administered by PSI at https://test-takers.psiexams.com/scrb/. It is required on every route, including both exam-waiver routes. Examination eligibility lasts one year and allows three attempts in a twelve-month period; after three failures the applicant waits twelve months (S.C. Code Section 40-59-220(E))..
- 3Exam fee. Pay the exam fee. Examination fees are paid directly to PSI. The Commission does not publish the amounts; they are in PSI’s South Carolina Residential Builder candidate information at https://test-takers.psiexams.com/scrb/, or ask the Commission at [email protected] or (803) 896-4696..
- 4Application fee. Pay the application fee ($135). Non-refundable $135 application fee, by check or money order payable to SCRBC, or paid online through the Commission’s electronic application. A returned-check fee of up to $30 may be charged. The application stays open for one year from the date it is received; if everything is not in by then the process starts over..
- 5License fee. Pay the license or certificate fee ($220). Residential Builder (RBB) license fee of $220, paid once the Commission approves the application. Renewal is $220, the renewal late fee is $50 and reinstatement of a lapsed license is $480..
- 6Surety bond. Post a surety bond ($15,000). Surety bond of at least $15,000 on the Commission’s approved form, required by S.C. Code Section 40-59-220(C). The individual’s name must be listed as principal; the bond cannot be in a company or business name. The original must carry the surety’s signature, the principal’s signature, a visible surety company seal and the attached power of attorney. DocuSign signatures and handwritten bonds are not accepted. The Commission publishes a list of surety companies authorized in South Carolina as a starting point..
- 7Financial responsibility. Show financial responsibility. A complete credit report from TransUnion, Equifax or Experian dated no more than 30 days before the application date, required by S.C. Code Section 40-59-250 and reviewed for liens and outstanding judgments. The application also asks you to list any outstanding judgments against you or entities you were associated with in the past five years. The Commission does not publish a minimum score, net worth or working capital figure for a Residential Builder license; ask at [email protected] or (803) 896-4696..
- 8Business license. Obtain a business license. Company details are only needed if you will trade under a company name. You must own at least 51 percent of the company to list it on your license; if you own less, the company applies separately for a residential business Certificate of Authorization. A South Carolina company attaches a Certificate of Existence (or Good Standing) from the SC Secretary of State and a company formed elsewhere attaches a Certificate of Authority, together with the articles of incorporation or organization and proof of ownership percentages..
- 9Other. Application paperwork: a copy of your driver’s license, state-issued ID, passport or military ID, a copy of your Social Security card, a notarized Verification of Lawful Presence form, legal name-change documents if applicable, and an explanatory statement with supporting documents for any "yes" answer on the disclosure questions..
- 10Other. Proof of the NASCLA Commercial General Building Contractor exam (a copy of your transcript) if you are using that waiver, plus a Verification of Licensure sent directly to the Commission by each state where you hold or have held a residential builder license or a license in a building-related profession..
Published fees on this path total $355, excluding exam-vendor fees, bonds, and insurance.
What you'll need to buy or arrange
Exam preparation
Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.
- Trade exam · if applicable
- Law / code exam
- Exam fee
Surety bond
A license or contractor bond is bought from a surety, not the state. Price is a small percentage of the bond amount and depends on your credit.
- Surety bond · $15,000
Business registration
If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.
- Business license
How South Carolina licenses residential contractors
South Carolina residential contractor · “Residential Builder License (RBB); limited "Residential Builder Exam Waiver" license on the waiver routes”
Statewide license
Issued by South Carolina Residential Builders Commission (SC LLR)
South Carolina licenses residential builders statewide through the Residential Builders Commission, a separate body from the Contractor’s Licensing Board that handles commercial work. A residential builder is anyone who constructs or superintends the construction, repair or improvement of a residential building not over three floors high and with no more than sixteen units in any single apartment building, where the undertaking costs more than $5,000. Unlike the commercial license, this one is held by the person: the $15,000 surety bond must name the individual as principal and cannot be in a company name, and you may only put a company on your license if you own at least 51 percent of it, otherwise the company applies for its own residential business Certificate of Authorization. Entry needs one year of residential building experience within the past five years, a credit report, the bond and both parts of the PSI examination. The technical part can be waived three ways: a current South Carolina General Contractor license in the Building (BD) or Limited Building (LB) classification, a current examined license held a year or more in Alabama, Georgia, Mississippi or North Carolina, or the NASCLA Commercial General Building Contractor exam passed within the past three years. A license issued on any of those waiver routes is a limited one that does not allow the holder to perform the mechanical trades.
Why Kentucky has nothing to transfer
Kentucky residential contractor · “Building or residential contractor license or registration (city- or county-issued)”
Licensed by cities and counties
Issued by No state authority; cities and counties license or register residential building contractors
Kentucky issues no statewide residential building, home builder or home improvement contractor license, so an out-of-state residential builder has nothing at state level to transfer and no state reciprocity to apply for. What Kentucky does license is the trades: the Department of Housing, Buildings and Construction (HBC) says on its own home page that it "licenses/certifies plumbers, electricians, boiler contractors, sprinkler and/or fire alarm contractors and building inspectors", and its administrative regulations in Title 815 add heating, ventilation and air conditioning licensing, elevator safety, boilers and pressure vessels, manufactured homes and home inspectors. Anyone self-performing plumbing, electrical, HVAC, boiler or fire-protection work in Kentucky needs the matching HBC license whatever the local building rules say, and that is where the state-level reciprocity conversation belongs. Housing work itself is licensed jurisdiction by jurisdiction and the rules differ sharply: Louisville Metro issues a Building Type A - Residential contractor license with six hours of continuing education before each renewal, Lexington-Fayette registers a "general contractor, residential only" class under its Contractors Registration Ordinance, and the joint Bowling Green - Warren County Contractors Licensing Board issues a General Contractors License for remodeling and building. Owensboro and Covington sit at the other end: neither publishes a contractor competency license at all, and a builder there files an occupational business license and carries insurance instead. None of these credentials involves a trade or business-law exam, and none of them gives any weight to a license held in another state, so the practical work is registering in each place where permits will be pulled and carrying the insurance each one demands.
How local licensing works in Kentucky
How local licensing works. No Kentucky agency licenses residential builders or remodelers, and there is no state qualifying party, no state exam and no state reciprocity for this work. Each city and county decides for itself, so identify the building department with jurisdiction over the address before applying anywhere. A credential issued by one Kentucky jurisdiction does not carry into the next one, and none of the jurisdictions below grants anything for a license held in another state. Two statewide obligations apply wherever the project is: the HBC license for any self-performed plumbing, electrical, HVAC, boiler or fire-protection work, and compliance with the Kentucky Building Code adopted in 815 KAR Chapter 007.
Louisville Metro (Jefferson County). The Office of Construction Review issues the contractor licenses for the merged city-county. A builder chooses a term and then a scope. License A "lets you work on one or more permitted projects during a calendar year, which runs from January 1st to December 31st"; License B "allows you to work on only one permitted project during a calendar year." The scopes are Building A-Residential, Building A-Residential/Commercial, Building A-Commercial and Building B. Building Type A costs $125 a year and Building Type B $50 per permit, and "only one Building Type B license will be granted per person/company per renewal year." Six continuing education credit hours from a pre-approved list are required before renewal for Building A-R, Building A-RC and Building B, which is to say for everyone whose scope touches houses. The filing is a certificate of liability insurance naming the Office of Construction Review as certificate holder, workers' compensation and unemployment insurance or a signed and notarized affidavit that neither applies, an Occupational License Number from the Revenue Commission of Jefferson County on (502) 574-4860, and the application itself through the Metro business portal. Annual renewals must arrive with current liability insurance, the continuing education records for residential contractors, a workers' compensation form and a subcontractor list, and "any missing items will result in ALL items being returned." There is no exam, no experience requirement and no bond on the building categories; only the wrecking classes carry a written exam, a surety bond and a year of supervisory experience. Office of Construction Review, 444 S. 5th St., Suite 100, (502) 574-3321.
Lexington-Fayette Urban County. The Division of Building Inspection runs a Contractors Registration Ordinance: "this ordinance requires all contractors to register with the Building Inspection" and "unregistered contractors cannot obtain building permits." There are three classes under Ordinance 5-90(a). A general contractor, residential only "constructs up to 4-family homes (4-Plex), performs home remodeling, and may supervise, arrange, and/or perform more than two unrelated building trades or crafts." A general contractor covers everything larger. A specialty contractor "performs commercial, industrial, public works and residential construction and specializes in two or fewer unrelated building trades or crafts." Registration takes four steps: a $10 Home Office Certificate or a $25 Certificate of Occupancy if the business address is in Fayette County; an occupational business license from Revenue at 218 E. Main St., 2nd floor, (859) 258-3340; general liability insurance and workers' compensation with LFUCG as certificate holder, or the "Workers Comp Exempt" declaration on the application if neither applies; and the online Contractor Registration Application through the city's permitting portal with the occupational license and certificate of insurance uploaded. No exam, experience or bond is required for any of the three classes. The division's published fee schedule prices permits rather than registrations and lists no contractor registration fee, so ask Building Inspection for the current amount before filing. 101 E. Vine St., (859) 258-3770, [email protected].
Bowling Green and Warren County. A single joint Contractors Licensing Board licenses for both the city and the county under Ordinance 91-58 WC and Ordinance 91-25 BG. A General Contractors License is needed by anyone "doing any type of general contract work in Bowling Green / Warren County including pulling permits for building or remodeling, construction management, or if you would have two or more subcontractors per job", and costs $250. A Specialty Contractors License covers subcontract work or a job with at most one subcontractor, and costs $100. Both fees are non-refundable and renewals are annual, pro-rated for a mid-year filing. The filing is the application plus a certificate of insurance naming the board as certificate holder, with "a minimum requirement for General Liability Insurance [of] $100,000 per occurrence", workers' compensation coverage shown on the certificate or a notarized Affidavit of Exemption, and a notarized Partnership Agreement for a partnership. Licenses are non-transferable and "any change in ownership nullifies previous licenses." There is no exam and no experience review, and the board says so directly: "the Contractors Licensing Board does not warrant that you are otherwise qualified to perform your trade or specialty by the issuance of its license." A Bowling Green occupational license is also needed for work inside the city limits and a Warren County occupational license for work outside them. Contractors Licensing Board, 1141 State Street, Suite 200, 270-781-3530.
Owensboro and Daviess County. There is no Owensboro contractor license. The Owensboro Metropolitan Planning Commission's Building & Electrical Division "issues all building and electrical permits required by the Kentucky Building Code and National Electrical Code" for Owensboro-Daviess County, along with HVAC, sign and parking lot permits and certificates of occupancy, and it issues no contractor credential of any kind. What a builder needs instead is the city's business registration: "any person, partnership, corporation, or other legal entity must register with the Occupational License Division prior to conducting business inside the city limits", with "a minimum license fee of seventy-five ($75.00) dollars due with registration." New construction draws at least three field inspections - footer and foundation, framing and final - before a certificate of occupancy issues. Occupational License Division, 101 East 4th Street, 270-687-5600.
Covington and Kenton County (Northern Kentucky). Planning and Development Services of Kenton County is the building department for Covington and the surrounding communities, and its rule is short: "when completing work within Kenton County, all contractors must obtain and maintain a Kenton County occupational license and provide proof of Kentucky workers' compensation insurance coverage. In addition, the Kentucky Department of Housing, Buildings, and Construction requires a license for electrical, HVAC, plumbing, and fire suppression work. Contractors must provide copies of all these items before any permits can be issued." There is no residential builder license, exam or bond. In Covington itself a zoning permit from the city, and a certificate of appropriateness where a historic preservation overlay applies, must come before PDS will issue the building permit. PDS, 1840 Simon Kenton Way, Suite 3400, Covington, 859-331-8980; building permits 859-957-2408.
Storm-damaged communities. The Attorney General's Office of Consumer Protection runs joint emergency contractor registration programs with the City of Mayfield and Graves County, the City of Princeton and Caldwell County, the City of Dawson Springs and Hopkins County, and the City of Bremen and Muhlenberg County, "to register contractors looking to assist storm victims." The program "requires contractors to register prior to doing business", and registrants are issued placards that must be displayed on the job site and in the vehicle. It is a consumer-protection registration aimed at transient storm-chasers rather than a skill license, and it applies only in those communities. Details on (502) 871-2424.
Everywhere else. The remaining Kentucky cities and counties each set their own rules, from a full licensing board like Bowling Green's to nothing beyond an occupational license and proof of insurance. Ask the local building department what it requires before bidding, and expect to repeat the filing in each jurisdiction.
- Louisville Metro / Jefferson County (Office of Construction Review - Building Type A and B contractor licenses)
- Lexington-Fayette Urban County (Division of Building Inspection - general contractor, residential only registration)
- Bowling Green and Warren County (joint Contractors Licensing Board - General and Specialty Contractors License)
- Owensboro and Daviess County (Owensboro Metropolitan Planning Commission - permits only; city occupational license)
- Covington and Kenton County (Planning and Development Services of Kenton County - occupational license and insurance only)
Common questions
- Do I have to take the South Carolina residential contractor exam if I'm licensed in Kentucky?
- The trade exam is waived, but South Carolina requires a law or code exam.
- What does it cost to get a South Carolina residential contractor license from Kentucky?
- Published fees on this path total $355, not counting exam vendor fees or bonds.
- Do my Kentucky work hours count in South Carolina?
- Yes. Documented out-of-state experience counts toward South Carolina's eligibility requirements.
- Does it work the other way, from South Carolina to Kentucky?
- Not necessarily. Reciprocity is directed. Going from South Carolina to Kentucky, the mechanism is not applicable.
Sources
- NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026
- S.C. Code of Laws Title 40, Chapter 59 - Residential Builders and Residential Specialty Contractors · S.C. Code Ann. Sections 40-59-20, 40-59-30, 40-59-220, 40-59-230, 40-59-250, 40-59-410 · South Carolina Legislature · Statute · verified September 17, 2026
- South Carolina Residential Builders Commission - home page · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agency Page · verified September 17, 2026
- SC Residential Builders Commission - Residential Builder License Application, Requirements and Instructions (Rev. 01/2026) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Form · verified September 17, 2026
- SC Residential Builders Commission - Residential Builder License (licensure by exam, licensure by exam waiver, fees) · South Carolina Department of Labor, Licensing and Regulation (LLR) · Agency Page · verified September 17, 2026
Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.