LicensebyState

Missouri to Florida: residential contractor license reciprocity

No credit· Start overVerified September 17, 2026· 14 sources

Missouri does not issue a statewide residential contractor license, so there is nothing to transfer. Here is Florida's standard path for out-of-state applicants.

Your origin state does not issue a statewide license at this level, so there is no license to transfer. The destination's standard out-of-state path is shown; expect to meet it in full.

Reference only, not legal advice. Rules change; confirm with the licensing board before you apply. Full disclaimer.

Certification by endorsement (states without a reciprocal agreement)

Your out-of-state credentials give no advantage. You meet the destination's requirements from scratch.

Florida accepts the NASCLA Accredited Examination for the Certified Residential class as well as for the two commercial classes: Form DBPR CILB 10 marks the NASCLA option 'applicable only for the General, Building, and Residential license', and the Board's reciprocity notice treats the NASCLA exam from 2009 forward as substantially similar to all Florida Division 1 trade knowledge exams, naming the RC class among them. A residential contractor licensed anywhere other than Louisiana, Mississippi or North Carolina applies on that $350 form under one of three options. Option A covers the NASCLA credential, and also any other national, regional, state or territorial examination the Board finds substantially equivalent, which needs an official score report and an Examination Evaluation Questionnaire from the origin exam provider; the Board's own form warns that a comparison of a state-specific test is 'very stringent and rarely approved'. Option B is for a license whose issuance criteria were substantially equivalent, proved with the license and the origin statutes and rules. Option C is for an applicant who has held the same or a similar contracting license for at least 10 years before applying, active now or within the last 2 years, and it adds a board-approved 2-hour Florida Building Code course covering wind mitigation. Everyone must still meet the experience standard of s. 489.111(2) and pass the Florida Business and Finance examination, and applicants who do not qualify for a waiver register with Professional Testing ($135) and sit the three-part Division 1 examination through Pearson VUE.

The Contract Administration and Project Management parts are waived on the NASCLA route, on an accepted equivalence under Option A or B, and under the 10-year provision in Option C; applicants outside those routes sit both parts. The Business and Finance exam and the Florida Building Code attestation are not waived on any option. The Board does not publish a processing time for endorsement applications; the Customer Contact Center is 850-487-1395.

At a glance

Trade exam
Waived
Law / code exam
Required
Out-of-state hours
Count toward eligibility

What you must already have

  • Your Missouri license must be active and in good standing.
  • You must have passed a licensing exam in Missouri that the destination considers comparable.The NASCLA Accredited Examination for Commercial General Building Contractors (NASCLA General Contractors Exam, 2009 forward) is accepted for the Certified Residential class: Form DBPR CILB 10 marks the option 'applicable only for the General, Building, and Residential license', and the Board's reciprocity notice treats the exam as substantially similar to all Florida Division 1 trade knowledge exams, listing RC among them. NASCLA applicants select Option A, skip the score report and Examination Evaluation Questionnaire, have the NASCLA transcript released to the Board, and still complete the experience section. The same option is open to any other national, regional, state or territorial licensing examination the Board finds substantially equivalent, evidenced by an official score report and an Examination Evaluation Questionnaire completed by the origin exam provider.
  • You must have held your Missouri license for at least 10 years.Option C only: the same or a similar contracting license held for at least 10 years before the date of application, currently active or active within the last 2 years
  • Experience under s. 489.111(2): four years as a worker or foreman with at least one year as a foreman, or a four-year construction-related degree plus one year, or the published college-credit combinations. Residential applicants must show experience in three of the five experience areas listed in the application under Rule 61G4-15.001(3). Experience earned in another state counts and is documented with a full employment and project history.

What you'll do to get licensed in Florida

  1. 1Application fee. Pay the application fee ($350). Form DBPR CILB 10 certification by endorsement application fee.
  2. 2Trade exam. Pass the destination's trade exam (if applicable). Florida Division 1 Contract Administration and Project Management examinations through Pearson VUE, required only for applicants who do not qualify through the NASCLA examination, an accepted equivalence or the 10-year provision.
  3. 3Law / code exam. Pass a law, rules, or code exam. Florida Business and Finance examination through Pearson VUE; it is not waived on any endorsement option, including the NASCLA route.
  4. 4Exam fee. Pay the exam fee ($135). Professional Testing, Inc. registration fee, charged each time a registration is made for any exam part.
  5. 5Exam fee. Pay the exam fee ($80). Pearson VUE administration fee for the Business and Finance computer-based test (Contract Administration and Project Management are $40 each).
  6. 6License fee. Pay the license or certificate fee ($200). Initial certification fee under Rule 61G4-12.009, reduced to $100 if the application is submitted in the second year of the biennium; biennial renewal is also $200.
  7. 7Business license. Obtain a business license ($50) (if applicable). Application or renewal fee for each business organization the certificate holder qualifies, filed on Form CILB 6-C.
  8. 8Background check. Complete a background check. Electronic fingerprints for the criminal history check required by s. 489.115, F.S..
  9. 9Financial responsibility. Show financial responsibility. A credit report from a nationally recognized agency showing a FICO-derived score and a public records statement checked at local, state and federal levels, with no unsatisfied judgments or liens; a score below 660 must be offset with a Board-approved 14-hour financial responsibility course. A business credit report is required as well when qualifying a business. The Board publishes no minimum net worth or working capital figure for this class: Rule 61G4-15.006 sets none, and s. 489.115(5)(b) only caps what the Board could require. Ask the Customer Contact Center at 850-487-1395 before assuming a dollar threshold applies..
  10. 10Insurance. Carry the required insurance. Public liability insurance of $100,000 and property damage insurance of $25,000 (the 'all other categories' figures on the Board's applications), plus workers' compensation coverage or a filed exemption.
  11. 11Other. Examination covering the Florida Building Code: NASCLA applicants attest on the application to having passed one, and applicants using the 10-year endorsement option provide proof of a board-approved 2-hour Florida Building Code course including wind mitigation techniques.
  12. 12Continuing education. Complete continuing education (if applicable). 14 hours of continuing education each renewal cycle, with mandatory hours in workplace safety, workers' compensation, business practices, building code and laws and rules. Certified licenses expire August 31 of every even-numbered year..

Published fees on this path total $765, excluding exam-vendor fees, bonds, and insurance.

What you'll need to buy or arrange

Exam preparation

Most boards contract PSI, Prov, or ICC for exams. Check which code edition the exam is written to before buying a prep course.

  • Trade exam · if applicable
  • Law / code exam
  • Exam fee · $135
  • Exam fee · $80

Business registration

If you plan to contract in your own name, budget for a business license or entity registration on top of the trade license.

  • Business license · $50 · if applicable

Liability insurance

Some states require proof of general liability or workers' compensation coverage at licensing time.

  • Insurance

Continuing education

Renewals usually need approved CE hours, often on the latest NEC. Reciprocal licensees are rarely exempt.

  • Other
  • Continuing education · if applicable

How Florida licenses residential contractors

Florida residential contractor · “Certified Residential Contractor (CR)

State license plus local requirements

Verified September 17, 2026· 6 sources

Issued by Florida Construction Industry Licensing Board (Department of Business and Professional Regulation)

Florida's homes-only tier is the Certified Residential Contractor (occupation code CR), issued by the Construction Industry Licensing Board within DBPR. Section 489.105(3)(c), F.S. limits the class to construction, remodeling, repair or improvement of one-, two- or three-family residences not exceeding two habitable stories above no more than one uninhabitable story, plus accessory structures. Florida licenses the person: an individual qualifies by experience and examination, receives a certificate of competency, and then files a separate application to qualify a business organization, so a contractor moving to Florida applies in their own name first. Florida runs two tracks at every level: a certified contractor holds a department certificate of competency and may contract in any jurisdiction in the state, while a registered contractor (code RR) has satisfied a county or city competency board instead and may contract only in the jurisdictions that granted that competency. Out-of-state applicants almost always want the certified license, because it is statewide and is the only track the Board's reciprocity and endorsement applications lead to.

How local licensing works in Florida

Why this level is Hybrid. Under s. 489.105(8) and (10), F.S., DBPR both certifies contractors statewide and registers contractors who qualified through a local licensing board, and a registered contractor 'may contract only in such jurisdictions'. The board's own application list therefore carries paired occupation codes for every Division I class: CR and RR for residential, CB/RB for building, CG/RG for general. The local route exists in the larger counties, and a state certificate makes it unnecessary.

Miami-Dade County. The Construction Trades Qualifying Board licenses Building, Building Specialties, Electrical, Maintenance, Mechanical and Plumbing contractors under Chapter 10 of the county code. It reciprocates only with Broward and Palm Beach counties in specific trade categories, and requires at least 75 percent on journeyman exams and 70 percent on other reciprocal category exams. Separately, Miami-Dade offers state-certified contractors a voluntary registration that speeds up permit applications in unincorporated Miami-Dade by pre-verifying license status and insurance.

Broward County. The Building Code Division's Central Examining Boards issue county Certificates of Competency; the applications, examining board calendar and descriptions of mandatory and voluntary certifications are published in the county's contractor packet (954-765-4400 x9876).

Out-of-state applicants. No county program reviewed publishes a rule that recognizes an out-of-state contractor license. Reciprocity and endorsement are state routes on Forms CILB 32 and CILB 10, and the license they produce is valid in every Florida jurisdiction.

Moving to FloridaLeaving Florida

Why Missouri has nothing to transfer

Missouri residential contractor · “Residential Building Contractor / Class C general contractor / construction business license (city-issued)

Licensed by cities and counties

Verified September 17, 2026· 19 sources

Issued by No state authority; cities and counties license, register or exempt residential contractors

Missouri issues no statewide residential contractor, home builder or remodeler license. The Division of Professional Registration's own list of regulated professions contains exactly one construction trade - Electrical Contractors - and Title XXII of the Revised Statutes, which holds every occupational licensing chapter from 324 to 346, has no chapter for contractors or builders at all. The one statewide construction credential Missouri does offer is the voluntary electrical contractor license under RSMo 324.900 to 324.945, and its own definitions confine it to electrical contracting; there is no building-contractor equivalent, so a residential builder has nothing at state level to apply for or transfer. Plumbers are examined by cities over 15,000 people and by first-classification counties under RSMo chapter 341, again locally rather than by a state board. Housebuilding is therefore regulated jurisdiction by jurisdiction, and Missouri splits sharply in two: Kansas City and Independence run genuine competency programs built on ICC or Prometric examinations, while St. Louis City, St. Louis County, Springfield, Columbia and Jefferson City ask a residential builder for nothing more than a business license and proof of workers' compensation. A contractor moving to Missouri qualifies separately in each place where permits will be pulled, and in the two testing cities the credential that actually travels is a passing score on a recognized national residential-builder examination rather than another state's license.

How local licensing works in Missouri

How it works in Missouri. There is no state contractor board, no state application and no state exam. Each city or county writes its own ordinance, so a builder holds whatever the local jurisdiction requires everywhere it works, and a credential from one Missouri city does not carry into the next of its own force. The single statewide preemption in Missouri construction law is the electrical one: RSMo 324.925 forces every political subdivision to recognize a statewide electrical contractor license and bars it from testing that holder's electrical proficiency. Nothing equivalent exists for builders, and the statute expressly leaves cities free to license and examine in other trades. What that produces is two very different kinds of place. In Kansas City and Independence a residential builder is examined and personally qualified. In St. Louis City, St. Louis County, Springfield, Columbia and Jefferson City the trades are examined and the builder is not - the builder simply buys a business license.

Kansas City. City Planning & Development runs a two-part system under Article XII of the Kansas City Building and Rehabilitation Code, and it is the only place in Missouri with a purpose-built residential builder credential. An individual first earns the Residential Building Supervisor certificate of qualification, which covers "constructing, structurally altering or enlarging any one- or two-family detached dwelling or townhouse including detached accessory buildings in excess of 400 square feet." The applicant files an application with a $60.00 nonrefundable fee and "shall earn a passing score on one of the two recognized exams administered for Kansas City, Missouri: the residential construction (10344) examination administered by Prometric or the standard residential building contractor (W13) examination administered by ICC." The exam is waived where the applicant holds "a passing score on a standard Prometric or ICC examination or other department-approved national testing agency examination comparable in content," documented to the Building Official's satisfaction - and the city states outright that it built the program to match Independence and Johnson County, so "if you have passed a residential builder exam in either of these jurisdictions, you will not be required to retest," and continuing education hours earned there count toward renewal. Being a Missouri-registered engineer or architect does not substitute for the exam. The company then applies for the Residential Building Contractor license, which needs a full-time managerial employee holding the supervisor certificate (the owner may be that person), a business license from the Finance Department, a current Missouri Secretary of State registration and a certificate of insurance carrying at least a $1,000,000 aggregate limit per occurrence and naming the City of Kansas City as additional insured. Fees are $60.00 to apply and $181.00 to issue, with $181.00 quadrennial renewals on both the license and the certificate; the certificate itself is free for its first four years. Applications go through CompassKC; [email protected], (816) 513-1500.

Independence. The city licenses the individual, not the company: "contractor licenses belong to the licensed individual, NOT a company," and "anyone hired to complete permittable work within the City of Independence" needs one. The residential tier is the Class C general contractor license, described as residential only, and the license "covers framing, footings, and general construction." Qualification is one of three things: ICC or Prometric test scores from within the last five years at 75 percent or better; "a current, active license with a jurisdiction that we reciprocate with," which the city defines broadly as "any jurisdiction that issues licenses in a similar fashion"; or, for a general contractor license, a bachelor's degree in engineering, architecture or construction science from an accredited college or university. Licenses expire on December 31 every year with no proration. A business license shows you may trade in the city; the contractor license shows you are qualified to do the work, and you need both. Authorized users may be added to a license, but the holder answers for their work. [email protected], (816) 325-7401.

St. Louis City. The Building Division operates four boards of examiners - electrical, mechanical contractors and pipefitters, plumbers and drainlayers, and sprinkler system contractors - and none of them touches building contractors. A residential builder needs a construction or contracting business license from the License Collector: a state tax number, the application form, clearance from the Collector of Revenue, an occupancy permit from the Building Division, and proof of workers' compensation coverage or a signed statement that the law does not require it. The city also requires that "all general contractors ... furnish a list of the sub-contractors on any job to the License Collector." No exam, experience or bond applies. Building Division, City Hall Room 425, 1200 Market St., (314) 622-3313.

St. Louis County. The county is explicit: "the County does not license general contractors," though it "does verify that out-of-state contractors are registered with the state," and it "does register all repair contractors that obtain permits for repairs from a natural disaster such as a flood or severe storm." What it does license is the trades, through Transportation and Public Works: electrical licensing, mechanical licensing (four contractor categories under the county Mechanical Code) and plumbing licensing, each with its own board, and "the County only issues trade permits to licensed contractors." A homebuilder in unincorporated St. Louis County therefore pulls permits without a county builder credential but must use licensed trade contractors. 41 South Central Ave., 6th Floor, Clayton, 314-615-5184. Note that most of the county's ninety-odd municipalities run their own building departments, so check the city as well.

Springfield. Building Development Services will not issue a permit until "a City-licensed General Contractor (GC) or Trade Master (TM) ... is listed on the permit," so the credential is mandatory - but it is a business license, obtained from the License Division, not a tested qualification. Springfield's testing program covers the crafts only: "electricians, plumbers, gas fitters, and mechanical craftsmen must be tested and certified to afford competence and knowledge of the codes," and those trades may substitute an out-of-jurisdiction exam score of 75 percent or better from Prometric, Experior, Block or ICC where the examination is identical to Springfield's. Contractors who carry workers' compensation file proof of it; those who are not required to carry it sign a notarized exemption statement. Permit desk 417-864-1585, License Division 417-864-1617.

Columbia. Community Development's Building and Site Development division licenses trades only - Trade Apprentice, Electrical Certification, Mechanical Certification and Plumbing Certification - because "electricians, plumbers, gas fitters and mechanical craftsman must be tested and certified," with the tests "administered by a private testing firm according to a regular schedule." There is no builder certification and no board of building examiners. A residential contractor takes out a city business license instead: $0.25 per $1,000 of gross receipts with a $75 annual minimum, a $10,000 annual maximum and a $45 application fee, plus a certificate of workers' compensation insurance for any construction business with one or more employees. Business License Division 573-874-7378.

Jefferson City. "All contractors performing work in Jefferson City must have a local license," but the split is the same as elsewhere: "electrical and plumbing contractors and their employees are required to obtain specific trade licenses directly from the Building Regulations Division," while "all other contractors are directed to the Business License Division to obtain their business license." A residential builder therefore files for the business license and takes no examination. Building Regulations (573) 634-6410, Business License Division (573) 634-6322.

Everywhere else. Missouri's other cities and counties set their own rules, and many require nothing but a permit and proof of insurance. Ask each building department what it licenses before you contract there. If you plan to sit an examination anywhere in Missouri, the practical move is the ICC standard residential building contractor (W13) or the Prometric residential construction (10344) paper, because those are the two Kansas City names outright and the same scores satisfy Independence, and a passing result documented from an approved agency is the nearest thing Missouri has to a transferable builder credential.

Moving to MissouriLeaving Missouri

Common questions

Do I have to take the Florida residential contractor exam if I'm licensed in Missouri?
The trade exam is waived, but Florida requires a law or code exam.
How long do I need to have held my Missouri license?
At least 10 years before applying.
What does it cost to get a Florida residential contractor license from Missouri?
Published fees on this path total $765, not counting exam vendor fees or bonds.
Do my Missouri work hours count in Florida?
Yes. Documented out-of-state experience counts toward Florida's eligibility requirements.
Does it work the other way, from Florida to Missouri?
Not necessarily. Reciprocity is directed. Going from Florida to Missouri, the mechanism is not applicable.

Sources

  1. Broward County Building Code Division - Get a License (Central Examining Boards) · Broward County Building Code Division · Agency Page · verified September 17, 2026
  2. DBPR Construction Industry - Frequently Asked Questions · Florida Department of Business and Professional Regulation · Faq · verified September 17, 2026
  3. DBPR - Construction Industry Licensing Board (CILB) home page · Florida Department of Business and Professional Regulation · Agency Page · verified September 17, 2026
  4. CILB Reciprocity list (states with reciprocal licensing agreements) · Fla. Stat. § 489.115(3)(c) · Florida Construction Industry Licensing Board · Agreement Document · verified September 17, 2026
  5. Form DBPR CILB 10 - Application for Certification by Endorsement (Eff. June 2024) · Fla. Stat. § 489.115(3); Rule 61-35.010, F.A.C. · Florida Department of Business and Professional Regulation · Form · verified September 17, 2026
  6. Form DBPR CILB 32 - Application for Certification by Reciprocity (Eff. July 2024) · Fla. Stat. § 489.115(3)(c); Rule 61-35.010, F.A.C. · Florida Department of Business and Professional Regulation · Form · verified September 17, 2026
  7. DBPR Bureau of Education & Testing - Florida State Construction Examination Registration Instructions and Application 2026 (Professional Testing, Inc.) · Rule 61G4-16, F.A.C. · Florida Department of Business and Professional Regulation / Professional Testing, Inc. · Form · verified September 17, 2026
  8. Miami-Dade County - Contractors & Building Trades (Construction Trades Qualifying Board) · Miami-Dade County Department of Regulatory and Economic Resources · Agency Page · verified September 17, 2026
  9. Rule 61G4-12.009, F.A.C. - Fees · Rule 61G4-12.009, F.A.C. · Florida Construction Industry Licensing Board · Admin Rule · verified September 17, 2026
  10. Rule 61G4-15.006, F.A.C. - Financial Responsibility and Financial Stability, Grounds for Denial · Rule 61G4-15.006, F.A.C. · Florida Construction Industry Licensing Board · Admin Rule · verified September 17, 2026
  11. Florida Statutes s. 489.105 - Definitions (Part I, Construction Contracting) · Fla. Stat. § 489.105(3)(a)-(c), (8), (10) · Florida Legislature · Statute · verified September 17, 2026
  12. Florida Statutes s. 489.111 - Licensure by examination · Fla. Stat. § 489.111(2) · Florida Legislature · Statute · verified September 17, 2026
  13. Florida Statutes s. 489.115 - Certification and registration; endorsement; reciprocity · Fla. Stat. § 489.115(3), (5) · Florida Legislature · Statute · verified September 17, 2026
  14. NASCLA Accredited Examination for Commercial General Building Contractors · National Association of State Contractors Licensing Agencies · Other · verified September 17, 2026

Verified dates are when a person last opened each source and confirmed the facts above. Cite the board, not us.

Report an error on this page

Related